Sindoh 3DWOX1 3D Printer

{"id":7802305282284,"title":"Creality Ender 3 S1","handle":"creality-ender-3-s1","description":"\u003cp\u003eThe Ender-3 S1 is the first direct drive 3D Printer of the Ender Series. The Ender-3 S1 supports more soft materials, comes preinstalled with CR Touch Auto Leveling Kit, and prints 50mm higher. \u003cbr\u003e\u003cbr\u003eVoxel Factory made the SPE-1000 special inspection on this unit (CSA equivalent) which is valid Canada wide.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 487 x 453 x 622 mm \u003cspan\u003e(19.2 x 17.8 x 24.5 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 9.1 kg (20 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 220 x 220 x 270 mm \u003cspan\u003e(8.7 x 8.7 x 10.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 13,068 cm³ (802 in³)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : \u003cspan data-mce-fragment=\"1\"\u003eSingle Dual-Gear direct drive extruder from Creality\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHotend : \u003cspan data-mce-fragment=\"1\"\u003eSprite hotend and extruder assembly f\u003c\/span\u003erom Creality\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 260°C (Voxel Factory suggest \u003cspan data-mce-fragment=\"1\"\u003e245°C MAX\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eHeatbed : PC on spring steel, flexible, magnetic (up to 100\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Manual and\/or automatic\u003c\/li\u003e\n\u003cli\u003eEnclosure : Open 3D printer, optional enclosure available\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : SD Card, LCD Screen \u0026amp; Knob, USB\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 350 W\u003c\/li\u003e\n\u003cli\u003eLive camera : No\u003c\/li\u003e\n\u003cli\u003ePrint recovery : Yes\u003c\/li\u003e\n\u003cli\u003eFilament sensor : Yes\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : None\u003c\/li\u003e\n\u003cli\u003eDisplay : \u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD display with rotary knob\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality Slicer, CURA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD display with rotary knob\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ\u003c\/li\u003e\n\u003cli\u003ePrintable formats: GCODE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCan print: PLA, Tough PLA, PETG, Nylon, ABS,\u003cbr\u003eTPU, Carbon \u0026amp; Glass filled nylon (With optional nozzle)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOpen filaments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2022-10-25T15:16:04-04:00","created_at":"2022-10-25T14:41:25-04:00","vendor":"Creality","type":"Creality 3D Printers","tags":["1.75mm","3Dprinters","Creality"],"price":49900,"price_min":49900,"price_max":49900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43415203643628,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CLT-3DP-NDR-XX3-XS1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality Ender 3 S1","public_title":null,"options":["Default Title"],"price":49900,"weight":11200,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6971636401346","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/CrealityEnder3S1.webp?v=1666725358","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ender-3S1Card.webp?v=1666799700"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/CrealityEnder3S1.webp?v=1666725358","options":["Title"],"media":[{"alt":null,"id":30664583839980,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/CrealityEnder3S1.webp?v=1666725358"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/CrealityEnder3S1.webp?v=1666725358","width":1400},{"alt":null,"id":30670246150380,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ender-3S1Card.webp?v=1666799700"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ender-3S1Card.webp?v=1666799700","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Ender-3 S1 is the first direct drive 3D Printer of the Ender Series. The Ender-3 S1 supports more soft materials, comes preinstalled with CR Touch Auto Leveling Kit, and prints 50mm higher. \u003cbr\u003e\u003cbr\u003eVoxel Factory made the SPE-1000 special inspection on this unit (CSA equivalent) which is valid Canada wide.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 487 x 453 x 622 mm \u003cspan\u003e(19.2 x 17.8 x 24.5 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 9.1 kg (20 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 220 x 220 x 270 mm \u003cspan\u003e(8.7 x 8.7 x 10.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 13,068 cm³ (802 in³)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : \u003cspan data-mce-fragment=\"1\"\u003eSingle Dual-Gear direct drive extruder from Creality\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHotend : \u003cspan data-mce-fragment=\"1\"\u003eSprite hotend and extruder assembly f\u003c\/span\u003erom Creality\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 260°C (Voxel Factory suggest \u003cspan data-mce-fragment=\"1\"\u003e245°C MAX\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eHeatbed : PC on spring steel, flexible, magnetic (up to 100\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Manual and\/or automatic\u003c\/li\u003e\n\u003cli\u003eEnclosure : Open 3D printer, optional enclosure available\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : SD Card, LCD Screen \u0026amp; Knob, USB\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 350 W\u003c\/li\u003e\n\u003cli\u003eLive camera : No\u003c\/li\u003e\n\u003cli\u003ePrint recovery : Yes\u003c\/li\u003e\n\u003cli\u003eFilament sensor : Yes\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : None\u003c\/li\u003e\n\u003cli\u003eDisplay : \u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD display with rotary knob\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality Slicer, CURA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD display with rotary knob\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ\u003c\/li\u003e\n\u003cli\u003ePrintable formats: GCODE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCan print: PLA, Tough PLA, PETG, Nylon, ABS,\u003cbr\u003eTPU, Carbon \u0026amp; Glass filled nylon (With optional nozzle)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOpen filaments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":7903455019244,"title":"Creality Ender 3 S1 PRO","handle":"creality-ender-3-s1-pro","description":"\u003cp\u003eThe Ender-3 S1 PRO is the first direct drive 3D Printer of the Ender Series. The Ender-3 S1 PRO supports soft materials, high temperature materials and comes preinstalled a full metal hotend and, CR Touch Auto Leveling.\u003cbr\u003e\u003cbr\u003eThis printer has a CUL electrical certification which is valid Canada-wide.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 487 x 453 x 622 mm (19.2 x 17.8 x 24.5 inches)\u003c\/li\u003e\n\u003cli\u003eWeight: 9.1 kg (20 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 220 x 220 x 270 mm (8.7 x 8.7 x 10.6 inches)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 13,068 cm³ (802 in³)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : \u003cspan data-mce-fragment=\"1\"\u003eSingle Dual-Gear direct drive extruder from Creality\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHotend : \u003cspan data-mce-fragment=\"1\"\u003eSprite all metal hotend and extruder assembly f\u003c\/span\u003erom Creality\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Textured PEI, flexible, magnetic (up to 100°C)\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Manual and\/or automatic\u003c\/li\u003e\n\u003cli\u003eEnclosure : Open 3D printer, optional enclosure available\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : SD Card, LCD Screen \u0026amp; Knob, USB\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 350 W\u003c\/li\u003e\n\u003cli\u003eLive camera : No\u003c\/li\u003e\n\u003cli\u003ePrint recovery : Yes\u003c\/li\u003e\n\u003cli\u003eFilament sensor : Yes\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : None\u003c\/li\u003e\n\u003cli\u003eDisplay : \u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch Touch LCD display\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality Slicer, CURA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD  touch display\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ\u003c\/li\u003e\n\u003cli\u003ePrintable formats: GCODE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCan print: PLA, Tough PLA, PETG, Nylon, ABS,\u003cbr\u003eTPU, Carbon \u0026amp; Glass filled nylon (With optional nozzle)\u003c\/li\u003e\n\u003cli\u003eOpen filaments\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2023-04-04T16:35:11-04:00","created_at":"2023-03-31T15:27:11-04:00","vendor":"Creality","type":"Creality 3D Printers","tags":["1.75mm","3Dprinters","Creality"],"price":61900,"price_min":61900,"price_max":61900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43759464382700,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CLT-3DP-NDR-XX3-S1P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Creality Ender 3 S1 PRO","public_title":null,"options":["Default Title"],"price":61900,"weight":11200,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/61KRbSMcd7L._AC_SL1200.jpg?v=1680635586"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/61KRbSMcd7L._AC_SL1200.jpg?v=1680635586","options":["Title"],"media":[{"alt":null,"id":31513309151468,"position":1,"preview_image":{"aspect_ratio":0.777,"height":1200,"width":932,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/61KRbSMcd7L._AC_SL1200.jpg?v=1680635586"},"aspect_ratio":0.777,"height":1200,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/61KRbSMcd7L._AC_SL1200.jpg?v=1680635586","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Ender-3 S1 PRO is the first direct drive 3D Printer of the Ender Series. The Ender-3 S1 PRO supports soft materials, high temperature materials and comes preinstalled a full metal hotend and, CR Touch Auto Leveling.\u003cbr\u003e\u003cbr\u003eThis printer has a CUL electrical certification which is valid Canada-wide.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 487 x 453 x 622 mm (19.2 x 17.8 x 24.5 inches)\u003c\/li\u003e\n\u003cli\u003eWeight: 9.1 kg (20 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 220 x 220 x 270 mm (8.7 x 8.7 x 10.6 inches)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 13,068 cm³ (802 in³)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : \u003cspan data-mce-fragment=\"1\"\u003eSingle Dual-Gear direct drive extruder from Creality\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHotend : \u003cspan data-mce-fragment=\"1\"\u003eSprite all metal hotend and extruder assembly f\u003c\/span\u003erom Creality\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Textured PEI, flexible, magnetic (up to 100°C)\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Manual and\/or automatic\u003c\/li\u003e\n\u003cli\u003eEnclosure : Open 3D printer, optional enclosure available\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : SD Card, LCD Screen \u0026amp; Knob, USB\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 350 W\u003c\/li\u003e\n\u003cli\u003eLive camera : No\u003c\/li\u003e\n\u003cli\u003ePrint recovery : Yes\u003c\/li\u003e\n\u003cli\u003eFilament sensor : Yes\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : None\u003c\/li\u003e\n\u003cli\u003eDisplay : \u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch Touch LCD display\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality Slicer, CURA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD  touch display\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ\u003c\/li\u003e\n\u003cli\u003ePrintable formats: GCODE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCan print: PLA, Tough PLA, PETG, Nylon, ABS,\u003cbr\u003eTPU, Carbon \u0026amp; Glass filled nylon (With optional nozzle)\u003c\/li\u003e\n\u003cli\u003eOpen filaments\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":7802175946988,"title":"Creality CR-10 Smart Pro","handle":"creality-cr-10-smart-pro","description":"\u003cp\u003eThe upgraded version of the Creality CR-10 Smart 3D Printer. Unlike the CR-10 Smart, the CR-10 Smart Pro is equipped with an all-metal direct-drive extruder. \u003c\/p\u003e\n\u003cp\u003eVoxel Factory has acquired the SPE-1000 special inspection on this unit (CSA equivalent) which is valid Canada wide.\u003c\/p\u003e\n\u003ch3\u003eMain features of the CR-10 Smart Pro:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality cloud app for remote print management\u003c\/li\u003e\n\u003cli\u003eDual-mode levelling for a great looking first layer\u003c\/li\u003e\n\u003cli\u003eAI HD camera intelligent handheld control in real-time\u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly LED lighting to brighten up the build space\u003c\/li\u003e\n\u003cli\u003e300 x 300 x 400 mm build space for large-format models\u003c\/li\u003e\n\u003cli\u003eMax. Nozzle temperature: up to 300 ° C\u003c\/li\u003e\n\u003cli\u003eMax. Heated bed temperature: up to 100 ° C\u003c\/li\u003e\n\u003cli\u003eAll-metal direct drive extruder for strong extrusion with high filament compatibility\u003c\/li\u003e\n\u003cli\u003eDual Z-Axis Dual Diagonal Drawbars for Stable Operation and Improved Accuracy\u003c\/li\u003e\n\u003cli\u003eUser-friendly user interface sensitive touch controls for easy operation\u003c\/li\u003e\n\u003cli\u003ePEI magnetic plate made of spring steel for strong adhesion and easy removal\u003c\/li\u003e\n\u003cli\u003e9-language operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 578 x 522 x 648 mm (22.8 x 20.6 x 25.5 inches)\u003c\/li\u003e\n\u003cli\u003eWeight: 13.6 kg (30 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 300 x 300 x 400 mm \u003cspan\u003e(11.8 x 11.8 x 15.7 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 36,000 cm³ (2,197 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Single Full-Metal Dual-Gear direct extruder from Creality\u003c\/li\u003e\n\u003cli\u003eHotend : Sprite hotend and extruder assembly from Creality\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Spring steel PEI magnetic sheet (up to 100\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Manual and\/or automatic\u003c\/li\u003e\n\u003cli\u003eEnclosure : Open 3D printer, optional enclosure available\u003c\/li\u003e\n\u003cli\u003eInterface : Connectivity : SD Card, LCD touchscreen, USB, Wifi, RJ45, Cloud APP\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 350 W\u003c\/li\u003e\n\u003cli\u003eLive camera : Yes with live controls\u003c\/li\u003e\n\u003cli\u003ePrint recovery : Yes\u003c\/li\u003e\n\u003cli\u003eFilament sensor : Yes\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : None\u003c\/li\u003e\n\u003cli\u003eDisplay : 4.3-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality Slicer, CURA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCreality Cloud App\u003c\/li\u003e\n\u003cli\u003eWeb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTouch screen\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCreality Cloud App\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ\u003c\/li\u003e\n\u003cli\u003ePrintable formats: GCODE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCan print: PLA, Tough PLA, PETG, Nylon, ABS, PC (Small parts),\u003cbr\u003eTPU, Carbon Glass filled nylon (With optional nozzle)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOpen filaments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2022-10-25T11:36:03-04:00","created_at":"2022-10-25T10:11:55-04:00","vendor":"Creality","type":"Creality 3D Printers","tags":["1.75mm","3Dprinters","Creality"],"price":89900,"price_min":89900,"price_max":89900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43414814654700,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CLT-3DP-XCR-10X-SMP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Creality CR-10 Smart Pro","public_title":null,"options":["Default Title"],"price":89900,"weight":17000,"compare_at_price":null,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6971636401360","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Creality_CR-10_Smart_PRO.webp?v=1666721372","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Touchscreen_and_connectivity.webp?v=1666795691","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ExtruderAndBLTouch.webp?v=1666797259","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/CrealityCR-10SmartPROCard.webp?v=1666798229"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Creality_CR-10_Smart_PRO.webp?v=1666721372","options":["Title"],"media":[{"alt":null,"id":30664354562284,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Creality_CR-10_Smart_PRO.webp?v=1666721372"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Creality_CR-10_Smart_PRO.webp?v=1666721372","width":1400},{"alt":null,"id":30669879935212,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Touchscreen_and_connectivity.webp?v=1666795691"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Touchscreen_and_connectivity.webp?v=1666795691","width":1400},{"alt":null,"id":30670033682668,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ExtruderAndBLTouch.webp?v=1666797259"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ExtruderAndBLTouch.webp?v=1666797259","width":1400},{"alt":null,"id":30670130282732,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/CrealityCR-10SmartPROCard.webp?v=1666798229"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/CrealityCR-10SmartPROCard.webp?v=1666798229","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe upgraded version of the Creality CR-10 Smart 3D Printer. Unlike the CR-10 Smart, the CR-10 Smart Pro is equipped with an all-metal direct-drive extruder. \u003c\/p\u003e\n\u003cp\u003eVoxel Factory has acquired the SPE-1000 special inspection on this unit (CSA equivalent) which is valid Canada wide.\u003c\/p\u003e\n\u003ch3\u003eMain features of the CR-10 Smart Pro:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality cloud app for remote print management\u003c\/li\u003e\n\u003cli\u003eDual-mode levelling for a great looking first layer\u003c\/li\u003e\n\u003cli\u003eAI HD camera intelligent handheld control in real-time\u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly LED lighting to brighten up the build space\u003c\/li\u003e\n\u003cli\u003e300 x 300 x 400 mm build space for large-format models\u003c\/li\u003e\n\u003cli\u003eMax. Nozzle temperature: up to 300 ° C\u003c\/li\u003e\n\u003cli\u003eMax. Heated bed temperature: up to 100 ° C\u003c\/li\u003e\n\u003cli\u003eAll-metal direct drive extruder for strong extrusion with high filament compatibility\u003c\/li\u003e\n\u003cli\u003eDual Z-Axis Dual Diagonal Drawbars for Stable Operation and Improved Accuracy\u003c\/li\u003e\n\u003cli\u003eUser-friendly user interface sensitive touch controls for easy operation\u003c\/li\u003e\n\u003cli\u003ePEI magnetic plate made of spring steel for strong adhesion and easy removal\u003c\/li\u003e\n\u003cli\u003e9-language operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 578 x 522 x 648 mm (22.8 x 20.6 x 25.5 inches)\u003c\/li\u003e\n\u003cli\u003eWeight: 13.6 kg (30 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 300 x 300 x 400 mm \u003cspan\u003e(11.8 x 11.8 x 15.7 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 36,000 cm³ (2,197 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Single Full-Metal Dual-Gear direct extruder from Creality\u003c\/li\u003e\n\u003cli\u003eHotend : Sprite hotend and extruder assembly from Creality\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Spring steel PEI magnetic sheet (up to 100\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Manual and\/or automatic\u003c\/li\u003e\n\u003cli\u003eEnclosure : Open 3D printer, optional enclosure available\u003c\/li\u003e\n\u003cli\u003eInterface : Connectivity : SD Card, LCD touchscreen, USB, Wifi, RJ45, Cloud APP\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 350 W\u003c\/li\u003e\n\u003cli\u003eLive camera : Yes with live controls\u003c\/li\u003e\n\u003cli\u003ePrint recovery : Yes\u003c\/li\u003e\n\u003cli\u003eFilament sensor : Yes\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : None\u003c\/li\u003e\n\u003cli\u003eDisplay : 4.3-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality Slicer, CURA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCreality Cloud App\u003c\/li\u003e\n\u003cli\u003eWeb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTouch screen\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCreality Cloud App\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ\u003c\/li\u003e\n\u003cli\u003ePrintable formats: GCODE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCan print: PLA, Tough PLA, PETG, Nylon, ABS, PC (Small parts),\u003cbr\u003eTPU, Carbon Glass filled nylon (With optional nozzle)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOpen filaments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":7933264953580,"title":"Bambu Lab P1P 3D Printer","handle":"bambu-lab-p1p-3d-printer","description":"\u003cp\u003e\u003cspan\u003eVoxel Factory sells the BambuLab P1P, X1C and X1CC for $100 more than BambuLab directly. However, we offer free shipping compared to $56 to $65 +tx at BambuLab and they lack the mandatory CSA certification for Canada. Therefore, Voxel Factory has a special inspection SPE-1000 that is CSA compliant and valid everywhere in Canada. We also offer a preferred rate on repair service for printers bought at Voxel Factory. So why buy at Voxel Factory?\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree shipping\u003c\/li\u003e\n\u003cli\u003eSPE-1000 special inspection (CSA compliant)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePreferred rates on repair services\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003cstrong\u003eThe latest 3D printer Bambu Lab P1P\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003einherits the proven kinematics and motion control system of the X1 series, as well as the rich sensors to ensure its reliability. It is capable of connecting the automatic material system (AMS) for multi-color printing. Great for beginners, professionals, or others who enjoy the fun of being creative, the P1P has been designed for easy setup and use in minutes. Additionally, it allows upgrading and customizing hardware with mod-friendly features for people to enjoy the fun of making their own one-of-a-kind 3D printer.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eFeatures \u003cbr\u003e\n\u003c\/h3\u003e\n\u003cli\u003eOut of the Box printing experience. Set up in 15 minutes.\u003c\/li\u003e\n\u003cli\u003eHigh-speed CoreXY structure with 20000 mm\/s² acceleration.\u003c\/li\u003e\n\u003cli\u003eUpgradeable and customizable to make your unique printer. Multi-color capability.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art electronics, including vibration compensation, pressure advance, Wifi connection, and optional camera and light package is available.\u003c\/li\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2023-06-08T14:51:57-04:00","created_at":"2023-06-08T11:42:22-04:00","vendor":"Bambu Lab","type":"Bambu Lab 3D Printers","tags":["3Dprinters","BambuLab"],"price":86900,"price_min":86900,"price_max":86900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43846322094316,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-3DP-P1P-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab P1P 3D Printer","public_title":null,"options":["Default Title"],"price":86900,"weight":14500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_P1P_3D_Printer_Product_Picture.webp?v=1686250893"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_P1P_3D_Printer_Product_Picture.webp?v=1686250893","options":["Title"],"media":[{"alt":null,"id":31702824943852,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_P1P_3D_Printer_Product_Picture.webp?v=1686250893"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_P1P_3D_Printer_Product_Picture.webp?v=1686250893","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eVoxel Factory sells the BambuLab P1P, X1C and X1CC for $100 more than BambuLab directly. However, we offer free shipping compared to $56 to $65 +tx at BambuLab and they lack the mandatory CSA certification for Canada. Therefore, Voxel Factory has a special inspection SPE-1000 that is CSA compliant and valid everywhere in Canada. We also offer a preferred rate on repair service for printers bought at Voxel Factory. So why buy at Voxel Factory?\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree shipping\u003c\/li\u003e\n\u003cli\u003eSPE-1000 special inspection (CSA compliant)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePreferred rates on repair services\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003cstrong\u003eThe latest 3D printer Bambu Lab P1P\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003einherits the proven kinematics and motion control system of the X1 series, as well as the rich sensors to ensure its reliability. It is capable of connecting the automatic material system (AMS) for multi-color printing. Great for beginners, professionals, or others who enjoy the fun of being creative, the P1P has been designed for easy setup and use in minutes. Additionally, it allows upgrading and customizing hardware with mod-friendly features for people to enjoy the fun of making their own one-of-a-kind 3D printer.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eFeatures \u003cbr\u003e\n\u003c\/h3\u003e\n\u003cli\u003eOut of the Box printing experience. Set up in 15 minutes.\u003c\/li\u003e\n\u003cli\u003eHigh-speed CoreXY structure with 20000 mm\/s² acceleration.\u003c\/li\u003e\n\u003cli\u003eUpgradeable and customizable to make your unique printer. Multi-color capability.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art electronics, including vibration compensation, pressure advance, Wifi connection, and optional camera and light package is available.\u003c\/li\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":7904653148396,"title":"Bambu Lab X1-Carbon 3D Printer","handle":"bambu-lab-x1-carbon-3d-printer","description":"\u003cp\u003e\u003cstrong\u003e*** Presale, ETA: Tuesday August 29 ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVoxel Factory sells the BambuLab X1CC and X1C for $100 more than BambuLab directly. However, we offer free shipping compared to $65+tx at BambuLab and they lack the mandatory CSA certification for Canada. Therefore, Voxel Factory has a special inspection SPE-1000 that is CSA compliant and valid everywhere in Canada. We also offer a preferred rate on repair service for printers bought at Voxel Factory. So why buy at Voxel Factory?\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree shipping\u003c\/li\u003e\n\u003cli\u003eSPE-1000 special inspection (CSA compliant)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePreferred rates on repair services\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eWhat to Expect from the X1-Carbon 3D Printer\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eAutomatic Material System (AMS)\u003c\/span\u003e\u003cspan\u003e \u003cstrong\u003eNOT\u003c\/strong\u003e included (sold separately or with the combo)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 16 multi-color printing with 4 AMS (\u003cstrong\u003eSold separately\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eDual auto bed leveling\u003c\/li\u003e\n\u003cli\u003e7μm lidar resolution\u003c\/li\u003e\n\u003cli\u003eSpaghetti failure detection\u003c\/li\u003e\n\u003cli\u003eAI inspected first layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_t\"\u003eDesigned for Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCore XY welded chassis\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e20000 mm\/s² acceleration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e32 \u003cspan data-mce-fragment=\"1\"\u003emm3\/s flow\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e500 mm\/\u003cspan data-mce-fragment=\"1\"\u003es² velocity\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eAdvanced materials empower advanced projects\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu Lab X1 Carbon, equipped with extra cooling and a hardened nozzle and carburized drive gear, unlocks a wider selection of materials, including PA, PC, PET, and TPU, and specializes in carbon fiber and glass fiber reinforced polymers.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eColors \u0026amp; Beyond\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eWith Bambu Lab Automatic Material System (AMS), you can now enjoy printing freely in multiple colors and materials. Each AMS unit supports up to 4 colors. Sold separately.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eAI-Powered Evolution\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eDual automated bed leveling for doubly guaranteed prints.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eAI inspected first layer\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eTired of waiting out that first layer? The lidar sensor can check your first layer so that you can get back to doing…anything else..\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eSpaghetti detection\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambuLab AI keeps an eye out for Spaghetti monsters, so that you can sleep easy in the knowledge that your printer is safe from this scourge.\u003c\/p\u003e","published_at":"2023-05-09T12:41:16-04:00","created_at":"2023-04-04T11:56:02-04:00","vendor":"Bambu Lab","type":"Bambu Lab 3D Printers","tags":[],"price":164900,"price_min":164900,"price_max":164900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43762881954028,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-3DP-X1C-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab X1-Carbon 3D Printer","public_title":null,"options":["Default Title"],"price":164900,"weight":21300,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_X1C_Carbon.webp?v=1686250770"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_X1C_Carbon.webp?v=1686250770","options":["Title"],"media":[{"alt":null,"id":31702818849004,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_X1C_Carbon.webp?v=1686250770"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_X1C_Carbon.webp?v=1686250770","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e*** Presale, ETA: Tuesday August 29 ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVoxel Factory sells the BambuLab X1CC and X1C for $100 more than BambuLab directly. However, we offer free shipping compared to $65+tx at BambuLab and they lack the mandatory CSA certification for Canada. Therefore, Voxel Factory has a special inspection SPE-1000 that is CSA compliant and valid everywhere in Canada. We also offer a preferred rate on repair service for printers bought at Voxel Factory. So why buy at Voxel Factory?\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree shipping\u003c\/li\u003e\n\u003cli\u003eSPE-1000 special inspection (CSA compliant)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePreferred rates on repair services\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eWhat to Expect from the X1-Carbon 3D Printer\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eAutomatic Material System (AMS)\u003c\/span\u003e\u003cspan\u003e \u003cstrong\u003eNOT\u003c\/strong\u003e included (sold separately or with the combo)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 16 multi-color printing with 4 AMS (\u003cstrong\u003eSold separately\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eDual auto bed leveling\u003c\/li\u003e\n\u003cli\u003e7μm lidar resolution\u003c\/li\u003e\n\u003cli\u003eSpaghetti failure detection\u003c\/li\u003e\n\u003cli\u003eAI inspected first layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_t\"\u003eDesigned for Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCore XY welded chassis\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e20000 mm\/s² acceleration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e32 \u003cspan data-mce-fragment=\"1\"\u003emm3\/s flow\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e500 mm\/\u003cspan data-mce-fragment=\"1\"\u003es² velocity\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eAdvanced materials empower advanced projects\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu Lab X1 Carbon, equipped with extra cooling and a hardened nozzle and carburized drive gear, unlocks a wider selection of materials, including PA, PC, PET, and TPU, and specializes in carbon fiber and glass fiber reinforced polymers.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eColors \u0026amp; Beyond\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eWith Bambu Lab Automatic Material System (AMS), you can now enjoy printing freely in multiple colors and materials. Each AMS unit supports up to 4 colors. Sold separately.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eAI-Powered Evolution\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eDual automated bed leveling for doubly guaranteed prints.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eAI inspected first layer\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eTired of waiting out that first layer? The lidar sensor can check your first layer so that you can get back to doing…anything else..\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eSpaghetti detection\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambuLab AI keeps an eye out for Spaghetti monsters, so that you can sleep easy in the knowledge that your printer is safe from this scourge.\u003c\/p\u003e"}

{"id":7904653181164,"title":"Bambu Lab X1-Carbon Combo 3D Printer","handle":"bambu-lab-x1-carbon-combo-3d-printer","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e*** Presale, ETA: Tuesday August 29 ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVoxel Factory sells the BambuLab X1CC and X1C for $100 more than BambuLab directly. However, we offer free shipping compared to $65+tx at BambuLab and they lack the mandatory CSA certification for Canada. Therefore, Voxel Factory has a special inspection SPE-1000 that is CSA compliant and valid everywhere in Canada. We also offer a preferred rate on repair service for printers bought at Voxel Factory. So why buy at Voxel Factory?\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree shipping\u003c\/li\u003e\n\u003cli\u003eSPE-1000 special inspection (CSA compliant)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePreferred rates on repair services\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eWhat to Expect from the X1-Carbon Combo 3D Printer\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x 4 colors \u003cspan data-mce-fragment=\"1\"\u003eAutomatic Material System (AMS)\u003c\/span\u003e included\u003c\/li\u003e\n\u003cli\u003eUp to 16 multi-color printing\u003c\/li\u003e\n\u003cli\u003eDual auto bed leveling\u003c\/li\u003e\n\u003cli\u003e7μm lidar resolution\u003c\/li\u003e\n\u003cli\u003eSpaghetti failure detection\u003c\/li\u003e\n\u003cli\u003eAI inspected first layer\u003c\/li\u003e\n\u003cli\u003eFull advanced features of X1 3D printers:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/bambulab.com\/en\/x1\" data-mce-href=\"https:\/\/bambulab.com\/en\/x1\"\u003eLearn more\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_t\"\u003eDesigned for Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCore XY welded chassis\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e20000 mm\/s² acceleration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e32 \u003cspan data-mce-fragment=\"1\"\u003emm3\/s flow\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e500 mm\/\u003cspan data-mce-fragment=\"1\"\u003es² velocity\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eAdvanced materials empower advanced projects\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu Lab X1 Carbon, equipped with extra cooling and a hardened nozzle and carburized drive gear, unlocks a wider selection of materials, including PA, PC, PET, and TPU, and specializes in carbon fiber and glass fiber reinforced polymers.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eColors \u0026amp; Beyond\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eWith Bambu Lab Automatic Material System (AMS), you can now enjoy printing freely in multiple colors and materials. Each AMS unit supports up to 4 colors. Purchase\u003cspan\u003e \u003c\/span\u003eadditional AMS units\u003cspan\u003e \u003c\/span\u003efor more colors.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eAI-Powered Evolution\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eDual automated bed leveling for doubly guaranteed prints.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eAI inspected first layer\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eTired of waiting out that first layer? The lidar sensor can check your first layer so that you can get back to doing…anything else..\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eSpaghetti detection\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambuLab AI keeps an eye out for Spaghetti monsters, so that you can sleep easy in the knowledge that your printer is safe from this scourge.\u003c\/p\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e","published_at":"2023-05-09T12:41:40-04:00","created_at":"2023-04-04T11:56:05-04:00","vendor":"Bambu Lab","type":"Bambu Lab 3D Printers","tags":["3Dprinters","BambuLab"],"price":196900,"price_min":196900,"price_max":196900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43762881986796,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-3DP-X1C-CMB-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab X1-Carbon Combo 3D Printer","public_title":null,"options":["Default Title"],"price":196900,"weight":22300,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_X1CC_Carbon_Combo_3DPrinter.webp?v=1683639933"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_X1CC_Carbon_Combo_3DPrinter.webp?v=1683639933","options":["Title"],"media":[{"alt":null,"id":31606898655468,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_X1CC_Carbon_Combo_3DPrinter.webp?v=1683639933"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/BambuLab_X1CC_Carbon_Combo_3DPrinter.webp?v=1683639933","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e*** Presale, ETA: Tuesday August 29 ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVoxel Factory sells the BambuLab X1CC and X1C for $100 more than BambuLab directly. However, we offer free shipping compared to $65+tx at BambuLab and they lack the mandatory CSA certification for Canada. Therefore, Voxel Factory has a special inspection SPE-1000 that is CSA compliant and valid everywhere in Canada. We also offer a preferred rate on repair service for printers bought at Voxel Factory. So why buy at Voxel Factory?\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree shipping\u003c\/li\u003e\n\u003cli\u003eSPE-1000 special inspection (CSA compliant)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePreferred rates on repair services\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eWhat to Expect from the X1-Carbon Combo 3D Printer\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x 4 colors \u003cspan data-mce-fragment=\"1\"\u003eAutomatic Material System (AMS)\u003c\/span\u003e included\u003c\/li\u003e\n\u003cli\u003eUp to 16 multi-color printing\u003c\/li\u003e\n\u003cli\u003eDual auto bed leveling\u003c\/li\u003e\n\u003cli\u003e7μm lidar resolution\u003c\/li\u003e\n\u003cli\u003eSpaghetti failure detection\u003c\/li\u003e\n\u003cli\u003eAI inspected first layer\u003c\/li\u003e\n\u003cli\u003eFull advanced features of X1 3D printers:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/bambulab.com\/en\/x1\" data-mce-href=\"https:\/\/bambulab.com\/en\/x1\"\u003eLearn more\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_t\"\u003eDesigned for Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCore XY welded chassis\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e20000 mm\/s² acceleration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e32 \u003cspan data-mce-fragment=\"1\"\u003emm3\/s flow\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e500 mm\/\u003cspan data-mce-fragment=\"1\"\u003es² velocity\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eAdvanced materials empower advanced projects\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu Lab X1 Carbon, equipped with extra cooling and a hardened nozzle and carburized drive gear, unlocks a wider selection of materials, including PA, PC, PET, and TPU, and specializes in carbon fiber and glass fiber reinforced polymers.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eColors \u0026amp; Beyond\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eWith Bambu Lab Automatic Material System (AMS), you can now enjoy printing freely in multiple colors and materials. Each AMS unit supports up to 4 colors. Purchase\u003cspan\u003e \u003c\/span\u003eadditional AMS units\u003cspan\u003e \u003c\/span\u003efor more colors.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eAI-Powered Evolution\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eDual automated bed leveling for doubly guaranteed prints.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eAI inspected first layer\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eTired of waiting out that first layer? The lidar sensor can check your first layer so that you can get back to doing…anything else..\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eSpaghetti detection\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambuLab AI keeps an eye out for Spaghetti monsters, so that you can sleep easy in the knowledge that your printer is safe from this scourge.\u003c\/p\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e"}

{"id":7917519208684,"title":"Makerbot Method X","handle":"makerbot-method-x","description":"\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch1 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eINDUSTRIAL 3D PRINTING MADE ACCESSIBLE\u003c\/h1\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003ePrint manufacturing tools and production parts to spec with real manufacturing grade materials\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-grid-size=\"12\" data-content-type=\"column-group\" class=\"pagebuilder-column-group\"\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch2 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eTWICE THE STRENGTH. TWICE THE ACCURACY. \u003c\/h2\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003ePatented VECT™ 110 (Variable Environmental Controlled Temperature) Thermal Regulation evenly heats and controls the print environment leading to parts that are 2x stronger on the z-axis, and 2x more accurate across the board.\u003c\/li\u003e\n\u003cli\u003ePrint continuously for hours, days, or weeks, thanks to METHOD’s unmatched industrial build quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch2 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eMETALS, COMPOSITES, AND POLYMERS PRINT BETTER ON METHOD X.\u003c\/h2\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003ePrint real ABS parts with RapidRinse™ supports that dissolve faster than anything else\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 patented features allow for better environmental controls than on any other desktop 3D printer.\u003c\/li\u003e\n\u003cli\u003eGo from 25+ tuned materials to infinite 3rd party options with the LABS GEN 2 Experimental Extruder.\u003c\/li\u003e\n\u003cli\u003e6-in-1 Modular Performance Extruders allow for quick change between material groups, preventing cross-contamination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch2 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eINDUSTRIAL POWER WITH DESKTOP EASE.\u003c\/h2\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003eCloudPrint™ gives you and your team secure access to 3D print from anywhere\u003c\/li\u003e\n\u003cli\u003eCloudPrint™ natively accepts the most popular CAD file types\u003c\/li\u003e\n\u003cli\u003e5” capacitive touchscreen provides an intuitive step-by-step setup and real-time controls on your jobs\u003c\/li\u003e\n\u003cli\u003eAuto-Calibration takes the guesswork out of setup and ensures a level build plate and extruder-alignment.\u003c\/li\u003e\n\u003cli\u003eSmartAssist Material Loading makes material changing a breeze from material bay to extruder, hands-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-grid-size=\"12\" data-content-type=\"column-group\" class=\"pagebuilder-column-group\"\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 431 x 437 x 649 mm\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(17 x 17.2 x 25.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 37.2 kg (81.9 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Deposition Model (FDM)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Single Extruder : 190 x 190 x 196 mm \u003cspan\u003e(7.5 x 7.5 x 7.75 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Dual Extruder : 152 x 190 x 196 mm \u003cspan\u003e(6 x 7.5 x 7.75 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume Single Extrusion: 7,075 cm³ (432 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume Dual Extrusion: 5,660 cm³ (345 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : 20 to 400 microns (200 recommended)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Extruders\u003cspan\u003e : \u003c\/span\u003e\u003cspan\u003eIncluded 1X, 2XA, compatible: ALL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4mm (\u003cspan data-mce-fragment=\"1\"\u003e17-4 PH Stainless Steel)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300C\u003c\/li\u003e\n\u003cli\u003eMaximum Heated Chamber temperature : 110c\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Yes\u003c\/li\u003e\n\u003cli\u003eEnclosure : Yes\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003ePower rating : 800 Watts MAX\u003c\/li\u003e\n\u003cli\u003eLive camera : Yes, remote monitoring and printing\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Yes\u003c\/li\u003e\n\u003cli\u003eDisplay : Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" title=\"Makerbot Cloud Print\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Makerbot Cloud Print\" href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny browser\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOBJ...\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePLA, Tough PLA, PetG, PetG ESD, PetG CF\u003c\/li\u003e\n\u003cli\u003eMetal UF 316L, Nylon, N6 Carbon Fiber, N12 Carbon Fiber, SEBS 95A\u003c\/li\u003e\n\u003cli\u003eABS, ABS-R, ABC CF, ABS EC, ABS ESD, ABS Kevlar, ASA\u003c\/li\u003e\n\u003cli\u003eDurabio, PC-ABS, PC-ABS FR, PC PBT\u003c\/li\u003e\n\u003cli\u003ePVA, RapidRinse, SR-30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2023-06-01T14:00:04-04:00","created_at":"2023-05-03T09:05:09-04:00","vendor":"Makerbot","type":"Makerbot 3D Printers","tags":["3Dprinters","Makerbot"],"price":758900,"price_min":758900,"price_max":758900,"available":false,"price_varies":false,"compare_at_price":869500,"compare_at_price_min":869500,"compare_at_price_max":869500,"compare_at_price_varies":false,"variants":[{"id":43804625469676,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MKB-3DP-MTD-00X-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Makerbot Method X","public_title":null,"options":["Default Title"],"price":758900,"weight":39500,"compare_at_price":869500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Product_Picture_07f58e7d-a232-4898-aedc-113e62e4a262.png?v=1683556323","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Product_With_Accessories_aefd2c62-c367-4f9e-9af4-a1cf20d75e41.png?v=1683556323"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Product_Picture_07f58e7d-a232-4898-aedc-113e62e4a262.png?v=1683556323","options":["Title"],"media":[{"alt":null,"id":31604115996908,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Product_Picture_07f58e7d-a232-4898-aedc-113e62e4a262.png?v=1683556323"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Product_Picture_07f58e7d-a232-4898-aedc-113e62e4a262.png?v=1683556323","width":1400},{"alt":null,"id":31604116029676,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Product_With_Accessories_aefd2c62-c367-4f9e-9af4-a1cf20d75e41.png?v=1683556323"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Product_With_Accessories_aefd2c62-c367-4f9e-9af4-a1cf20d75e41.png?v=1683556323","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch1 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eINDUSTRIAL 3D PRINTING MADE ACCESSIBLE\u003c\/h1\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003ePrint manufacturing tools and production parts to spec with real manufacturing grade materials\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-grid-size=\"12\" data-content-type=\"column-group\" class=\"pagebuilder-column-group\"\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch2 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eTWICE THE STRENGTH. TWICE THE ACCURACY. \u003c\/h2\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003ePatented VECT™ 110 (Variable Environmental Controlled Temperature) Thermal Regulation evenly heats and controls the print environment leading to parts that are 2x stronger on the z-axis, and 2x more accurate across the board.\u003c\/li\u003e\n\u003cli\u003ePrint continuously for hours, days, or weeks, thanks to METHOD’s unmatched industrial build quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch2 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eMETALS, COMPOSITES, AND POLYMERS PRINT BETTER ON METHOD X.\u003c\/h2\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003ePrint real ABS parts with RapidRinse™ supports that dissolve faster than anything else\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 patented features allow for better environmental controls than on any other desktop 3D printer.\u003c\/li\u003e\n\u003cli\u003eGo from 25+ tuned materials to infinite 3rd party options with the LABS GEN 2 Experimental Extruder.\u003c\/li\u003e\n\u003cli\u003e6-in-1 Modular Performance Extruders allow for quick change between material groups, preventing cross-contamination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch2 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eINDUSTRIAL POWER WITH DESKTOP EASE.\u003c\/h2\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003eCloudPrint™ gives you and your team secure access to 3D print from anywhere\u003c\/li\u003e\n\u003cli\u003eCloudPrint™ natively accepts the most popular CAD file types\u003c\/li\u003e\n\u003cli\u003e5” capacitive touchscreen provides an intuitive step-by-step setup and real-time controls on your jobs\u003c\/li\u003e\n\u003cli\u003eAuto-Calibration takes the guesswork out of setup and ensures a level build plate and extruder-alignment.\u003c\/li\u003e\n\u003cli\u003eSmartAssist Material Loading makes material changing a breeze from material bay to extruder, hands-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-grid-size=\"12\" data-content-type=\"column-group\" class=\"pagebuilder-column-group\"\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 431 x 437 x 649 mm\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(17 x 17.2 x 25.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 37.2 kg (81.9 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Deposition Model (FDM)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Single Extruder : 190 x 190 x 196 mm \u003cspan\u003e(7.5 x 7.5 x 7.75 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Dual Extruder : 152 x 190 x 196 mm \u003cspan\u003e(6 x 7.5 x 7.75 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume Single Extrusion: 7,075 cm³ (432 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume Dual Extrusion: 5,660 cm³ (345 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : 20 to 400 microns (200 recommended)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Extruders\u003cspan\u003e : \u003c\/span\u003e\u003cspan\u003eIncluded 1X, 2XA, compatible: ALL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4mm (\u003cspan data-mce-fragment=\"1\"\u003e17-4 PH Stainless Steel)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300C\u003c\/li\u003e\n\u003cli\u003eMaximum Heated Chamber temperature : 110c\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Yes\u003c\/li\u003e\n\u003cli\u003eEnclosure : Yes\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003ePower rating : 800 Watts MAX\u003c\/li\u003e\n\u003cli\u003eLive camera : Yes, remote monitoring and printing\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Yes\u003c\/li\u003e\n\u003cli\u003eDisplay : Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" title=\"Makerbot Cloud Print\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Makerbot Cloud Print\" href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny browser\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOBJ...\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePLA, Tough PLA, PetG, PetG ESD, PetG CF\u003c\/li\u003e\n\u003cli\u003eMetal UF 316L, Nylon, N6 Carbon Fiber, N12 Carbon Fiber, SEBS 95A\u003c\/li\u003e\n\u003cli\u003eABS, ABS-R, ABC CF, ABS EC, ABS ESD, ABS Kevlar, ASA\u003c\/li\u003e\n\u003cli\u003eDurabio, PC-ABS, PC-ABS FR, PC PBT\u003c\/li\u003e\n\u003cli\u003ePVA, RapidRinse, SR-30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":7917005013228,"title":"Makerbot Method X Carbon Fiber","handle":"makerbot-method-x-carbon-fiber","description":"\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eCARBON FIBER MADE ACCESSIBLE\u003c\/h3\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003eReplace metal parts and assemblies with 3D printed Carbon Fiber and dissolvable supports\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-grid-size=\"12\" data-content-type=\"column-group\" class=\"pagebuilder-column-group\"\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eDUAL EXTRUSION COMPOSITE 3D PRINTING FOR ADVANCED GEOMETRIES\u003c\/h3\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003ePatented VECT™ 110 (Variable Environmental Controlled Temperature) Thermal Regulation evenly heats and controls the print environment leading to parts that are 2x stronger on the z-axis, and 2x more accurate across the board.\u003c\/li\u003e\n\u003cli\u003eThe 1C Composite Extruder is engineered, optimized, and tested to withstand abrasive composite materials for maximum lifespan.\u003c\/li\u003e\n\u003cli\u003eDual extruders with water-soluble support material allow you to print in unlimited geometries and simplify your workflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eSTRONG, HEAT-RESISTANT METAL REPLACEMENT PARTS\u003c\/h3\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent strength to weight ratio – 110 MPa TS – for lightweighting applications such as robotic end effectors.\u003c\/li\u003e\n\u003cli\u003eEngineering-grade stiffness with high heat resistance under load for parts that perform.\u003c\/li\u003e\n\u003cli\u003eComposites ranging from Nylon 12 Carbon Fiber to ABS Kevlar give you flexibility on your project and rigidness in your part.\u003c\/li\u003e\n\u003cli\u003ePrint Metals, Composites, and Polymers and infinite 3rd party options with 6-in-1 Modular Performance Extruders for METHOD X.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eIMPORT YOUR COMPLEX DESIGNS, HIT PRINT IN CARBON FIBER.\u003c\/h3\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003eDesign in your favorite CAD software, then prep, print, and monitor remotely from CloudPrint™.\u003c\/li\u003e\n\u003cli\u003eQuickly change from production composites to modeling materials with the hands-free SmartAssist™ Material Loading System.\u003c\/li\u003e\n\u003cli\u003eSpring Steel Build Plate is durable enough to withstand thousands of prints in abrasive composites and the print pops off cleanly with a simple flex.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 431 x 437 x 649 mm\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(17 x 17.2 x 25.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 37.2 kg (81.9 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Deposition Model (FDM)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Single Extruder : 190 x 190 x 196 mm \u003cspan\u003e(7.5 x 7.5 x 7.75 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Dual Extruder : 152 x 190 x 196 mm \u003cspan\u003e(6 x 7.5 x 7.75 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume Single Extrusion: 7,075 cm³ (432 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume Dual Extrusion: 5,660 cm³ (345 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : 20 to 400 microns (200 recommended)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Extruders\u003cspan\u003e : \u003c\/span\u003e\u003cspan\u003eIncluded 1C, 2A 2XA, All\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4mm (\u003cspan data-mce-fragment=\"1\"\u003e17-4 PH Stainless Steel)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300C\u003c\/li\u003e\n\u003cli\u003eMaximum Heated Chamber temperature : 110c\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Yes\u003c\/li\u003e\n\u003cli\u003eEnclosure : Yes\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003ePower rating : 800 Watts MAX\u003c\/li\u003e\n\u003cli\u003eLive camera : Yes, remote monitoring and printing\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Yes\u003c\/li\u003e\n\u003cli\u003eDisplay : Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" title=\"Makerbot Cloud Print\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Makerbot Cloud Print\" href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny browser\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOBJ...\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePLA, Tough PLA, PetG, PetG ESD, PetG CF\u003c\/li\u003e\n\u003cli\u003eMetal UF 316L, Nylon, N6 Carbon Fiber, N12 Carbon Fiber, SEBS 95A\u003c\/li\u003e\n\u003cli\u003eABS, ABS-R, ABC CF, ABS EC, ABS ESD, ABS Kevlar, ASA\u003c\/li\u003e\n\u003cli\u003eDurabio, PC-ABS, PC-ABS FR, PC PBT\u003c\/li\u003e\n\u003cli\u003ePVA, RapidRinse, SR-30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2023-05-08T11:10:57-04:00","created_at":"2023-05-01T13:32:02-04:00","vendor":"Makerbot","type":"Makerbot 3D Printers","tags":["3d printer","Makerbot"],"price":827900,"price_min":827900,"price_max":827900,"available":true,"price_varies":false,"compare_at_price":939500,"compare_at_price_min":939500,"compare_at_price_max":939500,"compare_at_price_varies":false,"variants":[{"id":43802815594732,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MKB-3DP-MTD-00X-CFB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Makerbot Method X Carbon Fiber","public_title":null,"options":["Default Title"],"price":827900,"weight":39500,"compare_at_price":939500,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Carbon_Fiber_Edition.webp?v=1683664858","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Carbon_With_3DPrinted_Part.png?v=1683664858","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_With_Filaments_Spools.png?v=1683664858"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Carbon_Fiber_Edition.webp?v=1683664858","options":["Title"],"media":[{"alt":null,"id":31607917576428,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Carbon_Fiber_Edition.webp?v=1683664858"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Carbon_Fiber_Edition.webp?v=1683664858","width":1400},{"alt":null,"id":31604268007660,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Carbon_With_3DPrinted_Part.png?v=1683664858"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_Carbon_With_3DPrinted_Part.png?v=1683664858","width":1400},{"alt":null,"id":31604268073196,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_With_Filaments_Spools.png?v=1683664858"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Makerbot_Method_X_With_Filaments_Spools.png?v=1683664858","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eCARBON FIBER MADE ACCESSIBLE\u003c\/h3\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003eReplace metal parts and assemblies with 3D printed Carbon Fiber and dissolvable supports\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-grid-size=\"12\" data-content-type=\"column-group\" class=\"pagebuilder-column-group\"\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eDUAL EXTRUSION COMPOSITE 3D PRINTING FOR ADVANCED GEOMETRIES\u003c\/h3\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003ePatented VECT™ 110 (Variable Environmental Controlled Temperature) Thermal Regulation evenly heats and controls the print environment leading to parts that are 2x stronger on the z-axis, and 2x more accurate across the board.\u003c\/li\u003e\n\u003cli\u003eThe 1C Composite Extruder is engineered, optimized, and tested to withstand abrasive composite materials for maximum lifespan.\u003c\/li\u003e\n\u003cli\u003eDual extruders with water-soluble support material allow you to print in unlimited geometries and simplify your workflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eSTRONG, HEAT-RESISTANT METAL REPLACEMENT PARTS\u003c\/h3\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent strength to weight ratio – 110 MPa TS – for lightweighting applications such as robotic end effectors.\u003c\/li\u003e\n\u003cli\u003eEngineering-grade stiffness with high heat resistance under load for parts that perform.\u003c\/li\u003e\n\u003cli\u003eComposites ranging from Nylon 12 Carbon Fiber to ABS Kevlar give you flexibility on your project and rigidness in your part.\u003c\/li\u003e\n\u003cli\u003ePrint Metals, Composites, and Polymers and infinite 3rd party options with 6-in-1 Modular Performance Extruders for METHOD X.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003eIMPORT YOUR COMPLEX DESIGNS, HIT PRINT IN CARBON FIBER.\u003c\/h3\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003eDesign in your favorite CAD software, then prep, print, and monitor remotely from CloudPrint™.\u003c\/li\u003e\n\u003cli\u003eQuickly change from production composites to modeling materials with the hands-free SmartAssist™ Material Loading System.\u003c\/li\u003e\n\u003cli\u003eSpring Steel Build Plate is durable enough to withstand thousands of prints in abrasive composites and the print pops off cleanly with a simple flex.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 431 x 437 x 649 mm\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(17 x 17.2 x 25.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 37.2 kg (81.9 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Deposition Model (FDM)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Single Extruder : 190 x 190 x 196 mm \u003cspan\u003e(7.5 x 7.5 x 7.75 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Dual Extruder : 152 x 190 x 196 mm \u003cspan\u003e(6 x 7.5 x 7.75 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume Single Extrusion: 7,075 cm³ (432 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume Dual Extrusion: 5,660 cm³ (345 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : 20 to 400 microns (200 recommended)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Extruders\u003cspan\u003e : \u003c\/span\u003e\u003cspan\u003eIncluded 1C, 2A 2XA, All\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4mm (\u003cspan data-mce-fragment=\"1\"\u003e17-4 PH Stainless Steel)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300C\u003c\/li\u003e\n\u003cli\u003eMaximum Heated Chamber temperature : 110c\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Yes\u003c\/li\u003e\n\u003cli\u003eEnclosure : Yes\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003ePower rating : 800 Watts MAX\u003c\/li\u003e\n\u003cli\u003eLive camera : Yes, remote monitoring and printing\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Yes\u003c\/li\u003e\n\u003cli\u003eDisplay : Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" title=\"Makerbot Cloud Print\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Makerbot Cloud Print\" href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny browser\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOBJ...\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePLA, Tough PLA, PetG, PetG ESD, PetG CF\u003c\/li\u003e\n\u003cli\u003eMetal UF 316L, Nylon, N6 Carbon Fiber, N12 Carbon Fiber, SEBS 95A\u003c\/li\u003e\n\u003cli\u003eABS, ABS-R, ABC CF, ABS EC, ABS ESD, ABS Kevlar, ASA\u003c\/li\u003e\n\u003cli\u003eDurabio, PC-ABS, PC-ABS FR, PC PBT\u003c\/li\u003e\n\u003cli\u003ePVA, RapidRinse, SR-30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":7931030536428,"title":"Makerbot Method XL","handle":"makerbot-method-xl","description":"\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"display-2\"\u003e\n\u003ch1 data-content-type=\"heading\" data-appearance=\"default\" data-element=\"main\"\u003eUltiMaker Method XL\u003cbr\u003e\n\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003ch3\u003e3D print large-scale projects with industrial-grade materials.\u003c\/h3\u003e\n\u003cp class=\"medium__size--text\"\u003eScale up your 3D printing output with the Method XL. Larger parts, increased output, and competitive pricing. Experience the precision of industrial production alongside the flexibility of a 3D printer.\u003c\/p\u003e\n\u003cdiv data-element=\"main\" data-grid-size=\"12\" data-content-type=\"column-group\" class=\"pagebuilder-column-group\"\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 655 x 565 x 815 mm\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(25.8 x 22.2 x 32.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 56.5 kg (125 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology: Fused Deposition Model (FDM)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Single Extruder: Unknown (Or as Dual extrusion at least)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Dual Extruder: 305 x 305 x 320 mm \u003cspan\u003e(12 x 12 x 12.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume Single Extrusion: \u003cspan data-mce-fragment=\"1\"\u003eUnknown (Or as Dual extrusion at least)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume Dual Extrusion: \u003cspan data-mce-fragment=\"1\"\u003e29,768 cm³ (\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e1,814\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e in³)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLayer height: 100 to 400 microns (200 recommended)\u003c\/li\u003e\n\u003cli\u003eDimensional accuracy: +\/- 0.2mm or +\/- .002mm per mm of travel (whichever is greater)\u003c\/li\u003e\n\u003cli\u003eXYZ Resolution: 11.25 micron for XY, 0.625 micron for Z\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder: Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Extruders\u003cspan\u003e : \u003c\/span\u003e\u003cspan\u003eIncluded 1C, 2XA, compatible: ALL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4mm (\u003cspan data-mce-fragment=\"1\"\u003e17-4 PH Stainless Steel)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature: 300c\u003c\/li\u003e\n\u003cli\u003eMaximum Heated Bed temperature: 105c\u003c\/li\u003e\n\u003cli\u003eMaximum Heated Chamber temperature: 100c\u003c\/li\u003e\n\u003cli\u003eBed-leveling: Yes\u003c\/li\u003e\n\u003cli\u003eOperating sound: 57.1 +\/- 3dB\u003c\/li\u003e\n\u003cli\u003eEnclosure: Yes (Heated)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi, LAN\u003c\/li\u003e\n\u003cli\u003ePower rating : 800 Watts MAX\u003c\/li\u003e\n\u003cli\u003eLive camera : Yes, remote monitoring and printing\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Yes\u003c\/li\u003e\n\u003cli\u003eDisplay : Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" title=\"Makerbot Cloud Print\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Makerbot Cloud Print\" href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny browser\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOBJ...\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eABS-R, ABS-CF\u003c\/li\u003e\n\u003cli\u003eRapidRinse\u003c\/li\u003e\n\u003cli\u003eThird-Party: Polymaker Polymax PC, Luvocom 3F PAHT CF 9891 JABIL TPE SEBS 95A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2023-06-01T13:55:24-04:00","created_at":"2023-06-01T10:51:19-04:00","vendor":"Makerbot","type":"Makerbot 3D Printers","tags":["3Dprinters","Makerbot"],"price":1795000,"price_min":1795000,"price_max":1795000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43838547198188,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MKB-3DP-MTD-0XL-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Makerbot Method XL","public_title":null,"options":["Default Title"],"price":1795000,"weight":65000,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"812510034501","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_Front_View.webp?v=1685642114","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_left_view.webp?v=1685642114","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_right_view.webp?v=1685642114"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_Front_View.webp?v=1685642114","options":["Title"],"media":[{"alt":null,"id":31671386865900,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_Front_View.webp?v=1685642114"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_Front_View.webp?v=1685642114","width":1400},{"alt":null,"id":31671386800364,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_left_view.webp?v=1685642114"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_left_view.webp?v=1685642114","width":1400},{"alt":null,"id":31671386833132,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_right_view.webp?v=1685642114"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Method_XL_right_view.webp?v=1685642114","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch3 data-element=\"main\" data-appearance=\"default\" data-content-type=\"heading\"\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"display-2\"\u003e\n\u003ch1 data-content-type=\"heading\" data-appearance=\"default\" data-element=\"main\"\u003eUltiMaker Method XL\u003cbr\u003e\n\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003ch3\u003e3D print large-scale projects with industrial-grade materials.\u003c\/h3\u003e\n\u003cp class=\"medium__size--text\"\u003eScale up your 3D printing output with the Method XL. Larger parts, increased output, and competitive pricing. Experience the precision of industrial production alongside the flexibility of a 3D printer.\u003c\/p\u003e\n\u003cdiv data-element=\"main\" data-grid-size=\"12\" data-content-type=\"column-group\" class=\"pagebuilder-column-group\"\u003e\n\u003cdiv data-element=\"main\" data-background-images=\"{}\" data-appearance=\"full-height\" data-content-type=\"column\" class=\"pagebuilder-column\"\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 655 x 565 x 815 mm\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(25.8 x 22.2 x 32.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 56.5 kg (125 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology: Fused Deposition Model (FDM)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Single Extruder: Unknown (Or as Dual extrusion at least)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions Dual Extruder: 305 x 305 x 320 mm \u003cspan\u003e(12 x 12 x 12.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume Single Extrusion: \u003cspan data-mce-fragment=\"1\"\u003eUnknown (Or as Dual extrusion at least)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume Dual Extrusion: \u003cspan data-mce-fragment=\"1\"\u003e29,768 cm³ (\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e1,814\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e in³)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLayer height: 100 to 400 microns (200 recommended)\u003c\/li\u003e\n\u003cli\u003eDimensional accuracy: +\/- 0.2mm or +\/- .002mm per mm of travel (whichever is greater)\u003c\/li\u003e\n\u003cli\u003eXYZ Resolution: 11.25 micron for XY, 0.625 micron for Z\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder: Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Extruders\u003cspan\u003e : \u003c\/span\u003e\u003cspan\u003eIncluded 1C, 2XA, compatible: ALL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4mm (\u003cspan data-mce-fragment=\"1\"\u003e17-4 PH Stainless Steel)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature: 300c\u003c\/li\u003e\n\u003cli\u003eMaximum Heated Bed temperature: 105c\u003c\/li\u003e\n\u003cli\u003eMaximum Heated Chamber temperature: 100c\u003c\/li\u003e\n\u003cli\u003eBed-leveling: Yes\u003c\/li\u003e\n\u003cli\u003eOperating sound: 57.1 +\/- 3dB\u003c\/li\u003e\n\u003cli\u003eEnclosure: Yes (Heated)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi, LAN\u003c\/li\u003e\n\u003cli\u003ePower rating : 800 Watts MAX\u003c\/li\u003e\n\u003cli\u003eLive camera : Yes, remote monitoring and printing\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Yes\u003c\/li\u003e\n\u003cli\u003eDisplay : Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" title=\"Makerbot Cloud Print\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Makerbot Cloud Print\" href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.makerbot.com\/3d-printers\/cloudprint\/\"\u003eMakerbot Cloud Print\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny browser\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOBJ...\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eABS-R, ABS-CF\u003c\/li\u003e\n\u003cli\u003eRapidRinse\u003c\/li\u003e\n\u003cli\u003eThird-Party: Polymaker Polymax PC, Luvocom 3F PAHT CF 9891 JABIL TPE SEBS 95A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":7867983429868,"title":"Ultimaker S7 Dual Extruder 3D Printer","handle":"ultimaker-s7-dual-extruder-3d-printer-1","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBundle pricing available when you buy the S7 and Material Handling Station. Email us at service@voxelfactory.com for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe latest offering in 3D printing from UltiMaker, featuring dual extruders, swappable extrusion cores, an high resolution integrated camera for print monitoring, Wifi and USB printing, and built in Air Manager and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe integrated Air Manager filters out up to 95% of UFPs while also keeping the build\u003cbr data-mce-fragment=\"1\"\u003echamber temperature carefully regulated. The single door helps with heat loss by reducing the gaps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint head with inductive sensor: A new inductive sensor for bed leveling more\u003cbr data-mce-fragment=\"1\"\u003eaccurately probes the build plate. And automatic tilt compensation removes the need for\u003cbr data-mce-fragment=\"1\"\u003ethumbscrew bed calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdvanced active leveling: Reliable first-layer adhesion enables unattended use without manual leveling. Run-out and fan bracket sensors will pause your print and notify you if you run out of filament or if there is a clog that causes your print head to flood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFlexible build plate: The PEI-coated build plate makes for reliable print adhesion and removal. A sensor also assures your build plate will always be in place before printing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1080p camera: Checking on your print remotely via UltiMaker Digital Factory never\u003cbr data-mce-fragment=\"1\"\u003elooked better. The new 1080p camera in the UltiMaker S7 is mounted higher to give a\u003cbr data-mce-fragment=\"1\"\u003ebetter view of the first layers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWi-Fi 2.4 and 5 GHz: The UltiMaker S7 adds 5 GHz Wi-Fi compatibility, which cuts through\u003cbr data-mce-fragment=\"1\"\u003einterference to improve network stability, resulting in a more reliable wireless signal.\u003cbr data-mce-fragment=\"1\"\u003eThis is especially useful for companies that only allow connections via the 5 GHz band.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Ultimaker S7 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint file compatibility: The UltiMaker S7 was created with compatibility in mind. This\u003cbr data-mce-fragment=\"1\"\u003emeans that, if you own an UltiMaker S5, your entire digital library of S5 print files will\u003cbr data-mce-fragment=\"1\"\u003ework flawlessly on the S7 – with no re-slicing needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere. Access to security-assessed software – with remote printing, user management, and e-learning.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3 hours of free training at Voxel Factory\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExternal dimensions: 495 x 585 x 780 mm (19.5 x 23 x 30.7 in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 29.1 kg (64.2 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrinting\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan data-mce-fragment=\"1\"\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHotend : Swappable Print Cores\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeatbed : PEI coated flexible build plate (20 - 140 °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed-leveling : Inductive sensor-enabled bed leveling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnclosure : Single front door\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wi-Fi (2.4GHz + 5GHz),\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLive high resolution camera (view from desktop or app)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSoftware\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSlicing\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eControl\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSupported OS\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFile types\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePresliced files for S5 do not need reslicing \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eMaterials\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr data-mce-fragment=\"1\"\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2023-01-24T11:08:34-05:00","created_at":"2023-01-24T10:35:11-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2.85mm","Dual Extruder","Ultimaker 3D Printer","Ultimaker S7"],"price":1145300,"price_min":1145300,"price_max":1145300,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43629603717356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US7-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker S7 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":1145300,"weight":35000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202","options":["Title"],"media":[{"alt":null,"id":31234003239148,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBundle pricing available when you buy the S7 and Material Handling Station. Email us at service@voxelfactory.com for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe latest offering in 3D printing from UltiMaker, featuring dual extruders, swappable extrusion cores, an high resolution integrated camera for print monitoring, Wifi and USB printing, and built in Air Manager and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe integrated Air Manager filters out up to 95% of UFPs while also keeping the build\u003cbr data-mce-fragment=\"1\"\u003echamber temperature carefully regulated. The single door helps with heat loss by reducing the gaps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint head with inductive sensor: A new inductive sensor for bed leveling more\u003cbr data-mce-fragment=\"1\"\u003eaccurately probes the build plate. And automatic tilt compensation removes the need for\u003cbr data-mce-fragment=\"1\"\u003ethumbscrew bed calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdvanced active leveling: Reliable first-layer adhesion enables unattended use without manual leveling. Run-out and fan bracket sensors will pause your print and notify you if you run out of filament or if there is a clog that causes your print head to flood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFlexible build plate: The PEI-coated build plate makes for reliable print adhesion and removal. A sensor also assures your build plate will always be in place before printing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1080p camera: Checking on your print remotely via UltiMaker Digital Factory never\u003cbr data-mce-fragment=\"1\"\u003elooked better. The new 1080p camera in the UltiMaker S7 is mounted higher to give a\u003cbr data-mce-fragment=\"1\"\u003ebetter view of the first layers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWi-Fi 2.4 and 5 GHz: The UltiMaker S7 adds 5 GHz Wi-Fi compatibility, which cuts through\u003cbr data-mce-fragment=\"1\"\u003einterference to improve network stability, resulting in a more reliable wireless signal.\u003cbr data-mce-fragment=\"1\"\u003eThis is especially useful for companies that only allow connections via the 5 GHz band.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Ultimaker S7 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint file compatibility: The UltiMaker S7 was created with compatibility in mind. This\u003cbr data-mce-fragment=\"1\"\u003emeans that, if you own an UltiMaker S5, your entire digital library of S5 print files will\u003cbr data-mce-fragment=\"1\"\u003ework flawlessly on the S7 – with no re-slicing needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere. Access to security-assessed software – with remote printing, user management, and e-learning.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3 hours of free training at Voxel Factory\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExternal dimensions: 495 x 585 x 780 mm (19.5 x 23 x 30.7 in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 29.1 kg (64.2 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrinting\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan data-mce-fragment=\"1\"\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHotend : Swappable Print Cores\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeatbed : PEI coated flexible build plate (20 - 140 °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed-leveling : Inductive sensor-enabled bed leveling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnclosure : Single front door\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wi-Fi (2.4GHz + 5GHz),\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLive high resolution camera (view from desktop or app)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSoftware\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSlicing\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eControl\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSupported OS\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFile types\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePresliced files for S5 do not need reslicing \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eMaterials\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr data-mce-fragment=\"1\"\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":6910479204532,"title":"Ultimaker S5 Dual Extruder 3D Printer PRO Bundle","handle":"ultimaker-s5-dual-extruder-3d-printer-pro-bundle","description":"\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Ultimaker S5 Pro Bundle includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer?_pos=8\u0026amp;_sid=84293f853\u0026amp;_ss=r\"\u003eUltimaker S5 Dual Extruder 3D Printer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\"\u003eUltimaker S5 Air Manager \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\"\u003eUltimaker Material Handling Station\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/3dlac-plus-adhesive-solution?_pos=1\u0026amp;_sid=095177b47\u0026amp;_ss=r\"\u003e3Dlac adhesive spray\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\" data-mce-style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the PRO Bundle, you have automatic material handling, efficient air filtering, and filament humidity control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE, and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eUltimaker S5 3D Printer\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePro Bundle Assembled dimensions: 495 x 500 x 1197 mm (19.5 x 19.5 x 47.1 inches)  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003ePro Bundle Weight: 59.0 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology: Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height: Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder: Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0.4, and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter: 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature: 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed: Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling: Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure: Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors: Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating: 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay: 4.7-inch color touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial Handling Station\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical Dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity: 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type: dual-geared, abrasion-resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output: max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer:\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Ultimaker S5 3D printer\" href=\"https:\/\/www.voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAir Manager\u003c\/h3\u003e\n\u003cp\u003ePhysical Dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in)\u003c\/p\u003e\n\u003cp\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/p\u003e\n\u003cp\u003eNet weight: 3.6kg\u003c\/p\u003e\n\u003cp\u003eFilter technology: EPA E10 filter\u003c\/p\u003e\n\u003cp\u003eFan technology: low-noise brushless fan\u003c\/p\u003e\n\u003cp\u003eAir refresh rate: 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/p\u003e\n\u003cp\u003eFilter replacement is recommended every 1500 print hours (approx. 1 year)\u003c\/p\u003e\n\u003cp\u003eOperating sound: less than 51 dBA (including Ultimaker S5)\u003c\/p\u003e\n\u003cp\u003eCompatible printer: Ultimaker S5\u003c\/p\u003e\n\u003cp\u003eData \/ power connection: UMB connection (included)\u003c\/p\u003e\n\u003cp\u003eCompatible materials: Optimized for Ultimaker materials, 3rd party materials also supported.\u003c\/p\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Repetier-Host\" href=\"https:\/\/www.repetier.com\/\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","published_at":"2021-10-06T13:49:10-04:00","created_at":"2021-10-05T17:03:39-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["3Dprinters","Ultimaker","ultimaker s5"],"price":1587000,"price_min":1587000,"price_max":1587000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40769743061172,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US5-PRO-BUN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S5 Dual Extruder 3D Printer PRO Bundle","public_title":null,"options":["Default Title"],"price":1587000,"weight":29000,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-View1_1400x_6d5c605f-6fe7-4b60-ace2-9a74cc790673.jpg?v=1642542735","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-7_1400x_3874c7b1-e6be-42ec-881c-58d4529b1e0c.jpg?v=1642542735","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-10_1400x_3f0ade3f-07b5-4912-93bf-c0bbadec8b86.jpg?v=1642542735","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-6_1400x_f55204e9-952b-4d6e-acb2-7402ee5d30c3.jpg?v=1642542735"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666","options":["Title"],"media":[{"alt":null,"id":29047538483436,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666","width":1400},{"alt":null,"id":29047541072108,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-View1_1400x_6d5c605f-6fe7-4b60-ace2-9a74cc790673.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-View1_1400x_6d5c605f-6fe7-4b60-ace2-9a74cc790673.jpg?v=1642542735","width":1400},{"alt":null,"id":29047539368172,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-7_1400x_3874c7b1-e6be-42ec-881c-58d4529b1e0c.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-7_1400x_3874c7b1-e6be-42ec-881c-58d4529b1e0c.jpg?v=1642542735","width":1400},{"alt":null,"id":29047539630316,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-10_1400x_3f0ade3f-07b5-4912-93bf-c0bbadec8b86.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-10_1400x_3f0ade3f-07b5-4912-93bf-c0bbadec8b86.jpg?v=1642542735","width":1400},{"alt":null,"id":29047538745580,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-6_1400x_f55204e9-952b-4d6e-acb2-7402ee5d30c3.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-6_1400x_f55204e9-952b-4d6e-acb2-7402ee5d30c3.jpg?v=1642542735","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Ultimaker S5 Pro Bundle includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer?_pos=8\u0026amp;_sid=84293f853\u0026amp;_ss=r\"\u003eUltimaker S5 Dual Extruder 3D Printer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\"\u003eUltimaker S5 Air Manager \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\"\u003eUltimaker Material Handling Station\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/3dlac-plus-adhesive-solution?_pos=1\u0026amp;_sid=095177b47\u0026amp;_ss=r\"\u003e3Dlac adhesive spray\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\" data-mce-style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the PRO Bundle, you have automatic material handling, efficient air filtering, and filament humidity control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE, and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eUltimaker S5 3D Printer\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePro Bundle Assembled dimensions: 495 x 500 x 1197 mm (19.5 x 19.5 x 47.1 inches)  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003ePro Bundle Weight: 59.0 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology: Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height: Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder: Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0.4, and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter: 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature: 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed: Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling: Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure: Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors: Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating: 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay: 4.7-inch color touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial Handling Station\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical Dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity: 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type: dual-geared, abrasion-resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output: max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer:\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Ultimaker S5 3D printer\" href=\"https:\/\/www.voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAir Manager\u003c\/h3\u003e\n\u003cp\u003ePhysical Dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in)\u003c\/p\u003e\n\u003cp\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/p\u003e\n\u003cp\u003eNet weight: 3.6kg\u003c\/p\u003e\n\u003cp\u003eFilter technology: EPA E10 filter\u003c\/p\u003e\n\u003cp\u003eFan technology: low-noise brushless fan\u003c\/p\u003e\n\u003cp\u003eAir refresh rate: 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/p\u003e\n\u003cp\u003eFilter replacement is recommended every 1500 print hours (approx. 1 year)\u003c\/p\u003e\n\u003cp\u003eOperating sound: less than 51 dBA (including Ultimaker S5)\u003c\/p\u003e\n\u003cp\u003eCompatible printer: Ultimaker S5\u003c\/p\u003e\n\u003cp\u003eData \/ power connection: UMB connection (included)\u003c\/p\u003e\n\u003cp\u003eCompatible materials: Optimized for Ultimaker materials, 3rd party materials also supported.\u003c\/p\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Repetier-Host\" href=\"https:\/\/www.repetier.com\/\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e"}

{"id":756386332790,"title":"Ultimaker S5 Dual Extruder 3D Printer","handle":"ultimaker-s5-dual-extruder-3d-printer","description":"\u003cdiv style=\"text-align: left;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ca href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" title=\"Send an email to ask for a quote\" target=\"_blank\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBundle pricing available when you buy the S5, Air Manager and Material Station. Email us for a quote with the link above. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.repetier.com\/\" title=\"Repetier-Host\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" title=\"Link to Download page for Cura Connect by Ultimaker\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2018-04-23T05:36:12-04:00","created_at":"2018-04-17T13:37:32-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["3Dprinters","Ultimaker"],"price":959100,"price_min":959100,"price_max":959100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8122029408374,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US5-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S5 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":959100,"weight":29000,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874982375","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1642542848","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1642542860","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1642542866"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836","options":["Title"],"media":[{"alt":null,"id":29047543922924,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836","width":1400},{"alt":null,"id":29047544217836,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1642542848"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1642542848","width":1400},{"alt":null,"id":29047544545516,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1642542860"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1642542860","width":1400},{"alt":null,"id":29047544643820,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1642542866"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1642542866","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: left;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ca href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" title=\"Send an email to ask for a quote\" target=\"_blank\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBundle pricing available when you buy the S5, Air Manager and Material Station. Email us for a quote with the link above. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.repetier.com\/\" title=\"Repetier-Host\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" title=\"Link to Download page for Cura Connect by Ultimaker\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}