Ultimaker Third Party Parts

{"id":10152855177,"title":"The Olsson Ruby 0.40mm Nozzle","handle":"the-olsson-ruby-0-4mm-nozzle","description":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e","published_at":"2017-07-31T13:30:28-04:00","created_at":"2017-07-26T14:21:15-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["Hardware","Hotend"],"price":12300,"price_min":12300,"price_max":12300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41722235977,"title":"1.75mm","option1":"1.75mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-175-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"The Olsson Ruby 0.40mm Nozzle - 1.75mm","public_title":"1.75mm","options":["1.75mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050186"},{"id":41722236041,"title":"2.85mm","option1":"2.85mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"The Olsson Ruby 0.40mm Nozzle - 2.85mm","public_title":"2.85mm","options":["2.85mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050179"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-1.jpg?v=1539829267","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-2.jpg?v=1539829267","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-3.jpg?v=1539829267","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-4.jpg?v=1539829267"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-1.jpg?v=1539829267","options":["Filament diameter"],"content":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e"}

{"id":10217190793,"title":"Original Olsson Steel Nozzle 0.50mm","handle":"original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. This stainless steel nozzle will allow you to print abrasive filaments (\u003ca href=\"\/products\/colorfabb-xt-cf20-2-85mm-amphora3d-carbon-fiber\" target=\"_blank\" title=\"Colorfabb XT CF20 Carbon Fiber 2.85mm filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003ecf20\u003c\/a\u003e, \u003ca href=\"\/products\/colorfabb-glowfill-glowing-in-the-dark-2-85mm-pla-pha-750gr\" target=\"_blank\" title=\"Colorfabb Glowfill 2.85mm filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eGlowfill\u003c\/a\u003e, etc.) without the fear of wearing down your nozzle too quickly.\u003c\/p\u003e\n\u003cp\u003eHigh precision manufacturing, made in Sweden by 3DVerkstan. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in brass : \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor extra durability, consider the \u003ca href=\"\/products\/the-olsson-ruby-0-4mm-nozzle\" target=\"_blank\" title=\"The Olsson Ruby 0.40mm Nozzle\" rel=\"noopener noreferrer\"\u003eOlsson Ruby\u003c\/a\u003e (also available for 1.75mm filament).\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003estainless steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.50mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T15:14:30-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","steel","Ultimaker"],"price":1900,"price_min":1900,"price_max":1900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42539209033,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOS-285-050","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Original Olsson Steel Nozzle 0.50mm","public_title":null,"options":["Default Title"],"price":1900,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050063"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-steel-nozzle-0-50mm-1.jpg?v=1539829290"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-steel-nozzle-0-50mm-1.jpg?v=1539829290","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. This stainless steel nozzle will allow you to print abrasive filaments (\u003ca href=\"\/products\/colorfabb-xt-cf20-2-85mm-amphora3d-carbon-fiber\" target=\"_blank\" title=\"Colorfabb XT CF20 Carbon Fiber 2.85mm filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003ecf20\u003c\/a\u003e, \u003ca href=\"\/products\/colorfabb-glowfill-glowing-in-the-dark-2-85mm-pla-pha-750gr\" target=\"_blank\" title=\"Colorfabb Glowfill 2.85mm filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eGlowfill\u003c\/a\u003e, etc.) without the fear of wearing down your nozzle too quickly.\u003c\/p\u003e\n\u003cp\u003eHigh precision manufacturing, made in Sweden by 3DVerkstan. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in brass : \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor extra durability, consider the \u003ca href=\"\/products\/the-olsson-ruby-0-4mm-nozzle\" target=\"_blank\" title=\"The Olsson Ruby 0.40mm Nozzle\" rel=\"noopener noreferrer\"\u003eOlsson Ruby\u003c\/a\u003e (also available for 1.75mm filament).\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003estainless steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.50mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":10217114249,"title":"Original Olsson Brass Nozzle 0.25mm","handle":"original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.25mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T14:55:21-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538669449,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-025","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.25mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050025"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-25mm-1.jpeg?v=1539829284"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-25mm-1.jpeg?v=1539829284","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.25mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":10217098441,"title":"Original Olsson Brass Nozzle 0.40mm","handle":"original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T14:51:34-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538516745,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.40mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050032"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-40mm-1.jpeg?v=1539829282"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-40mm-1.jpeg?v=1539829282","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":10217149769,"title":"Original Olsson Brass Nozzle 0.60mm","handle":"original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.60mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T15:02:17-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538903817,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-060","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.60mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050124"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-60mm-1.jpeg?v=1539829286"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-60mm-1.jpeg?v=1539829286","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.60mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":10217153993,"title":"Original Olsson Brass Nozzle 0.80mm","handle":"original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.80mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T15:03:29-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538935625,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.80mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050131"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-80mm-1.jpeg?v=1539829288"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-80mm-1.jpeg?v=1539829288","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.80mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":10273226249,"title":"Ultimaker Enclosure Kit by Printed Solid","handle":"ultimaker-safety-enclosure-kit","description":"\u003cp\u003eEnclose your \u003ca href=\"\/collections\/ultimaker-3d-printers\" target=\"_blank\" title=\"Ultimaker 3D Printers at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 3D printer\u003c\/a\u003e to help regulate the temperature inside the printer and ensure that wandering fingers don't stray too close to the model being printed.\u003c\/p\u003e\n\u003cp\u003eManufactured in the U.S. by Printed Solid, these enclosures are made of precision-cut acrylic. Some light assembly required.\u003c\/p\u003e\n\u003cp\u003eIncludes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser cut panels for the door and top enclosure\u003c\/li\u003e\n\u003cli\u003ePre-mounted hinges\u003c\/li\u003e\n\u003cli\u003eFasteners\u003c\/li\u003e\n\u003cli\u003eInstruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-08-25T13:32:06-04:00","created_at":"2017-08-13T13:47:04-04:00","vendor":"Printed Solid","type":"Open Parts","tags":["Ultimaker"],"price":19900,"price_min":19900,"price_max":21900,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22099930775670,"title":"Ultimaker S5","option1":"Ultimaker S5","option2":null,"option3":null,"sku":"PSD-ENC-US5-REG-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Enclosure Kit by Printed Solid - Ultimaker S5","public_title":"Ultimaker S5","options":["Ultimaker S5"],"price":21900,"weight":5000,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":43221334857,"title":"Ultimaker 3","option1":"Ultimaker 3","option2":null,"option3":null,"sku":"PSD-ENC-UM3-REG-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker Enclosure Kit by Printed Solid - Ultimaker 3","public_title":"Ultimaker 3","options":["Ultimaker 3"],"price":19900,"weight":5000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"752830104730"},{"id":44039172617,"title":"Ultimaker 3 Extended","option1":"Ultimaker 3 Extended","option2":null,"option3":null,"sku":"PSD-ENC-UM3-EXT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Enclosure Kit by Printed Solid - Ultimaker 3 Extended","public_title":"Ultimaker 3 Extended","options":["Ultimaker 3 Extended"],"price":19900,"weight":5000,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"752830104839"},{"id":44039172681,"title":"Ultimaker 2+","option1":"Ultimaker 2+","option2":null,"option3":null,"sku":"PSD-ENC-UM2-REG-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Enclosure Kit by Printed Solid - Ultimaker 2+","public_title":"Ultimaker 2+","options":["Ultimaker 2+"],"price":19900,"weight":5000,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"752830104532"},{"id":44039172745,"title":"Ultimaker 2+ Extended","option1":"Ultimaker 2+ Extended","option2":null,"option3":null,"sku":"PSD-ENC-UM2-EXT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Enclosure Kit by Printed Solid - Ultimaker 2+ Extended","public_title":"Ultimaker 2+ Extended","options":["Ultimaker 2+ Extended"],"price":19900,"weight":5000,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-enclosure-kit-by-printed-solid-1.jpg?v=1539829300","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-enclosure-kit-by-printed-solid-2.jpeg?v=1539829300","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-enclosure-kit-by-printed-solid-3.jpeg?v=1539829300"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-enclosure-kit-by-printed-solid-1.jpg?v=1539829300","options":["Model"],"content":"\u003cp\u003eEnclose your \u003ca href=\"\/collections\/ultimaker-3d-printers\" target=\"_blank\" title=\"Ultimaker 3D Printers at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 3D printer\u003c\/a\u003e to help regulate the temperature inside the printer and ensure that wandering fingers don't stray too close to the model being printed.\u003c\/p\u003e\n\u003cp\u003eManufactured in the U.S. by Printed Solid, these enclosures are made of precision-cut acrylic. Some light assembly required.\u003c\/p\u003e\n\u003cp\u003eIncludes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser cut panels for the door and top enclosure\u003c\/li\u003e\n\u003cli\u003ePre-mounted hinges\u003c\/li\u003e\n\u003cli\u003eFasteners\u003c\/li\u003e\n\u003cli\u003eInstruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":2024334327926,"title":"The Olsson Ruby 0.60mm Nozzle","handle":"the-olsson-ruby-0-60mm-nozzle","description":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.60mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e","published_at":"2017-07-31T13:30:28-04:00","created_at":"2018-08-22T12:02:20-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["Hardware","Hotend"],"price":12300,"price_min":12300,"price_max":12300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18916571873398,"title":"1.75mm","option1":"1.75mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-175-060","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"The Olsson Ruby 0.60mm Nozzle - 1.75mm","public_title":"1.75mm","options":["1.75mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050186"},{"id":18916571906166,"title":"2.85mm","option1":"2.85mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-285-060","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"The Olsson Ruby 0.60mm Nozzle - 2.85mm","public_title":"2.85mm","options":["2.85mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"7350089050179"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-1.jpg?v=1539829475","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-2.jpg?v=1539829475","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-3.jpg?v=1539829475","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-4.jpg?v=1539829475"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-1.jpg?v=1539829475","options":["Filament diameter"],"content":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.60mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e"}

{"id":2024382201974,"title":"The Olsson Ruby 0.80mm Nozzle","handle":"the-olsson-ruby-0-80mm-nozzle","description":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.80mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e","published_at":"2017-07-31T13:30:28-04:00","created_at":"2018-08-22T12:17:51-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["Hardware","Hotend"],"price":12300,"price_min":12300,"price_max":12300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18916830904438,"title":"1.75mm","option1":"1.75mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-175-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"The Olsson Ruby 0.80mm Nozzle - 1.75mm","public_title":"1.75mm","options":["1.75mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050186"},{"id":18916830937206,"title":"2.85mm","option1":"2.85mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-285-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"The Olsson Ruby 0.80mm Nozzle - 2.85mm","public_title":"2.85mm","options":["2.85mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050179"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-1.jpg?v=1539829484","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-2.jpg?v=1539829484","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-3.jpg?v=1539829484","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-4.jpg?v=1539829484"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-1.jpg?v=1539829484","options":["Filament diameter"],"content":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.80mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e"}