- Accueil
- Bambu Lab AMS Hub
Bambu Lab AMS Hub
Produits Connexes
Bambu Lab Dual Sided Cool And Engineering Plate
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$30.99
Suitable for Bambu Lab X1 and P1 series This printing plate is what Bambu Lab call the "Cool Plate" In fact this is a dual sided engineering plate, with one of the side covered with a cool plate sheet. To make it very clear: Side 1: Engineering plate covered with a cool plate sheetSide 2: Engineering plate not covered with anything 1. Bambu C...
Spare Sheet for Bambu Lab Cool Plate (2pcs)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$23.98
The Bambu Cool Sheet is a sheet with an adhesive side for replacing the sheet on your Cool Plate. Compatibility X1 Series and P1 Series Note The Bambu Cool sheet is easy to replace and install. After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet. Yo...
Bambu Lab Dual Sided High Temp And Engineering Plate
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$38.99
Suitable for Bambu Lab X1, P1 and A1 series This printing plate is what Bambu Lab call the "High Temperature Plate (Smooth PEI)" In fact this is a dual sided engineering plate, with one of the side covered with a High-Temp sheet. To make it very clear: Side 1: Engineering plate covered with a high-temp sheetSide 2: Engineering plate not covered...
Spare Sheet for Bambu Lab High Temp Plate (2pcs)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$20.99
Overview The Bambu High-Temperature Sheet (Smooth PEI) is a sheet with an adhesive side for replacing the sheet on your High-Temperature Plate. Compatibility X1 Series and P1 Series Note The Bambu High-Temperature sheet is easy to replace and install. After tearing off the original sheet, please use alcohol to wipe the surface clean...
Bambu Lab Dual-Sided Textured PEI Plate
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$49.99
Suitable for Bambu Lab A1, X1 & P1 series Side 1: Textured PEI PlateSide 2: Textured PEI Plate Recommended Settings Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements Materials Heatbed Temperature Glue Stick Required? Uppe...
Bambu Lab Complete Hotend Assembly - X1(C) Series
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$44.99
Complete hotend assembly for X1C 3D printers, not compatible with the X1E 3D printers. The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is the default one in both the Bambu Lab X1C Series and P1 Series 3D printers.
Bambu Lab Hotend with Nozzle for X1(C) and P1 series
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$19.99
Bambu Lab hotend & nozzle for X1(C) series and P1 series Note that the .2mm stainless steel nozzle should never be used for abrasive and filled materials.
Bambu Lab Ceramic Heater for the X1 and X1C
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$17.99
Ceramic Heater for the X1 and X1C exclusively, not for the X1E This ceramic heater can heat the nozzle up to 300℃, which is for use with Bambu Lab complete hotend assemby only. Installation Learn more about the replacement of ceramic heater on Bambu Lab Wiki. In the Box - Ceramic Heater * 3- Thermal Grease * 3- Retaining Clip * 3
Bambu Lab thermistor for the X1 and X1C
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$17.99
Thermistor for the X1 & X1C 3D printer, not for the P1 & A1 series, neither for the X1E This thermistor has highly accurate temperature measurement and reliable structural design. It is for use with Bambu Lab complete hotend assembly only. Installation Learn more about the replacement of thermistor on Bambu Lab Wiki. In the Box - The...
Bambu Lab Silicone Sock for X1 and P1 series (pack of 3)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$8.99
Overview The Silicone Sock for Hotend is made from high-quality silicone for higher temperature resistance (rated to 300°C printing temperatures). Ensuring optimal thermal insulation and tear resistance, the silicone sock also provides the nozzle with long-lasting protection from cooling air and plastic adhesion. Installation Learn more about t...
Bambu Lab Activated Carbon Air Filter
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$7.99
Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points produce much fewer VOCs during printing. These VOCs are absorbed by Bambu Lab activated carbon air filter. Compatibility X1C an...
Bambu Lab X1 & P1 Series Nozzle Wiper (3pcs)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$5.99
Pack of 3 nozzle wipers. The Nozzle Wiper is used to clean up the waste overflowing from the nozzle of the printer. It consists of PP elastic structure, PTFE tube, and a lock screw. When the PP elastic structure undergoes plastic deformation or fracture, the nozzle wiper can be replaced. When the PTFE tube becomes loose and can be rotated, plea...