{"id":8989943267564,"title":"Polymaker Fiberon PPS-GF20 1.75mm 500g","handle":"polymaker-fiberon-pps-gf20-1-75mm-500g","description":"\u003cp\u003e\u003cstrong\u003ePrint Electrically Insulative, Flame-Retardant Parts with Fiberon™ PPS-GF20\u003c\/strong\u003e\u003cbr\u003eDesigned for engineers who demand the best in thermal resistance, dimensional stability, and dielectric insulation. This glass fiber–reinforced PPS filament is the go-to choice for high-performance applications across electronics, aerospace, and industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation Where It Matters\u003c\/strong\u003e\u003cbr\u003eFiberon PPS-GF20 offers 6.05 kV\/mm dielectric strength and a low dielectric constant (2.71 @ 1MHz), making it perfect for electrical housings, ADAS sensor enclosures, and structural components in 5G base stations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to Withstand Extreme Heat\u003c\/strong\u003e\u003cbr\u003eEngineered to maintain structural integrity in temperatures up to 236.3 °C (HDT @ 0.45 MPa after annealing). Whether you're building parts for high-temp enclosures, hot-air equipment, or vehicle under-hood use, this filament won’t warp under pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGlass Fiber–Reinforced for Strength\u003c\/strong\u003e\u003cbr\u003eWith 20% glass fiber reinforcement, PPS-GF20 delivers exceptional strength and stiffness—up to 4552 MPa Young’s modulus and 102 MPa bending strength in XY—ideal for brackets, antenna mounts, and chemically exposed parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame-Retardant \u0026amp; Chemically Resistant\u003c\/strong\u003e\u003cbr\u003eUL94 V0 certified at 1.5mm and resistant to acids, bases, oils, and solvents. A trusted option for mission-critical environments such as chemical labs, factory floors, and automotive housings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecise, Reliable, Print-Ready\u003c\/strong\u003e\u003cbr\u003eSupports high-speed printing (up to 250 mm\/s) with minimal warping and stable Z-axis strength. Recommended for hardened steel nozzles. Available in neutral gray for reduced heat absorption and post-processing flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAMS Compatible, Moisture \u0026amp; Tangle Free\u003c\/strong\u003e\u003cbr\u003eDelivered vacuum-sealed and neatly wound, this filament is compatible with Bambu AMS systems. Low moisture absorption (0.11%， 70%RH, 23°C) ensures reliable print quality, even in humid environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHave a different application in mind?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-fiberon-pa612-esd-1-75mm-500g\"\u003eFiberon™ PA612-ESD\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block\"\u003e\n\u003cdiv id=\"panel-1\" role=\"tabpanel\" aria-labelledby=\"tab-1\" tabindex=\"0\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003ePrinting Temperature: 310˚C - 350˚C\u003cbr\u003eBed Temperature: 80˚C - 90˚C\u003cbr\u003ePrinting Speed: up to 250mm\/s\u003cbr\u003eFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1-3mm\u003cbr\u003eRetraction Speed: 20-40mm\/s\u003cbr\u003e\u003cbr\u003eDrying Settings: 100˚C for 10h\u003cbr\u003e\u003cem\u003e(Only if the material has absorbed moisture)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFor even better performance, you can anneal this material for 10 hours @ 130°C\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 310˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eYou may need a filament dryer depending on the humidity of your environment. Keep dry when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/wiki.polymaker.com\/polymaker-products\/printer-profiles\" title=\"https:\/\/wiki.polymaker.com\/polymaker-products\/printer-profiles\" target=\"_blank\"\u003eDownload Printer Profiles\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" title=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" title=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated.pdf?v=1727285624\" title=\"Polymaker 889 Documentation\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" title=\"Polymaker Profile Creation Process\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" title=\"Polymaker ISO9001 CERT\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Fiberon™ PPS-GF20 used for?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eFiberon™ PPS-GF20 is designed for high-temperature, high-performance applications that demand exceptional heat resistance, electrical insulation, and UL94 V0 flame retardant. Common use cases include electronic housings, sensor enclosures, antenna mounts, and parts exposed to harsh industrial environments.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIs PPS-GF20 electrically insulating?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eYes. Unlike carbon fiber composites, PPS-GF20 is electrically insulating. It offers a dielectric strength of 6.05 kV\/mm and low dielectric constants, making it suitable for moderate voltage insulation and high-frequency electronic applications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow heat resistant is PPS-GF20?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eExtremely. When annealed at 130 °C for 10 hours, the material achieves a heat deflection temperature (HDT) of over 230 °C at 0.45 MPa—ideal for high-heat industrial parts and enclosures. At 230 °C annealing, it offers even higher resistance under load (up to 219.6 °C @ 1.8 MPa).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDo I need to anneal PPS-GF20 to achieve its full heat resistance?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWhile the material performs well unannealed, annealing at 130 °C or 230 °C significantly boosts thermal performance. The 130 °C anneal is suitable for most users, while 230 °C offers maximum heat resistance for demanding environments.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat printers and settings work best for PPS-GF20?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePPS-GF20 prints reliably on desktop level 3D printers like the QIDI Plus4 or Bambu H2D. Recommended settings include a 310–350 °C nozzle, 80–90 °C bed, fan off, and hardened steel nozzle. For best results, use PolySupport™ for PA12 and anneal after printing.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIs it compatible with AMS systems?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eYes. Fiberon™ PPS-GF20 works well with Bambu AMS systems. However, due to the stiffness of glass fiber filament, performance may vary on other AMS-like devices depending on tube length and curvature.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDoes PPS-GF20 absorb moisture?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eNo. The material has low moisture sensitivity, with an equilibrium water absorption rate of just 0.11%(70%RH, 23°C). This ensures consistent dimensional accuracy even in humid environments. Nevertheless, moisture adhering to the filament surface can easily cause defects on the surface of the printed part when printing at high temperatures. When using the filament, please pay attention to moisture protection. If you find that the material is damp, please dry it at 100 degrees for 10h before printing.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow strong is PPS-GF20?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eVery strong. It offers up to 102 MPa bending strength and 64 MPa tensile strength (XY), with a Young’s modulus of over 4500 MPa. These specs make it ideal for structural parts that require stiffness and dimensional stability.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat’s the difference between PPS-GF20 and PPS-CF10?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePPS-GF20 replaces the conductive carbon fiber with insulating glass fiber—solving the electrical conductivity issue in PPS-CF10. It retains similar thermal and mechanical properties while being more affordable and chemically resistant.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIs PPS-GF20 flame retardant?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eYes. It is UL94 V0 rated at 1.5 mm, making it suitable for electrical enclosures, automotive parts, and safety-critical applications requiring certified flame resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-08-21T16:05:49-04:00","created_at":"2025-08-21T13:40:15-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","Fiberon","Filaments","Polyphenylene sulfide","PPS"],"price":8199,"price_min":8199,"price_max":8199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46746022936812,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PPS-G20-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PPS-GF20 1.75mm 500g","public_title":null,"options":["Default Title"],"price":8199,"weight":850,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PPS-GF20_1.75mm_500g_product_picture.webp?v=1755797087"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PPS-GF20_1.75mm_500g_product_picture.webp?v=1755797087","options":["Title"],"media":[{"alt":null,"id":35812268343532,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PPS-GF20_1.75mm_500g_product_picture.webp?v=1755797087"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PPS-GF20_1.75mm_500g_product_picture.webp?v=1755797087","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003ePrint Electrically Insulative, Flame-Retardant Parts with Fiberon™ PPS-GF20\u003c\/strong\u003e\u003cbr\u003eDesigned for engineers who demand the best in thermal resistance, dimensional stability, and dielectric insulation. This glass fiber–reinforced PPS filament is the go-to choice for high-performance applications across electronics, aerospace, and industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation Where It Matters\u003c\/strong\u003e\u003cbr\u003eFiberon PPS-GF20 offers 6.05 kV\/mm dielectric strength and a low dielectric constant (2.71 @ 1MHz), making it perfect for electrical housings, ADAS sensor enclosures, and structural components in 5G base stations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to Withstand Extreme Heat\u003c\/strong\u003e\u003cbr\u003eEngineered to maintain structural integrity in temperatures up to 236.3 °C (HDT @ 0.45 MPa after annealing). Whether you're building parts for high-temp enclosures, hot-air equipment, or vehicle under-hood use, this filament won’t warp under pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGlass Fiber–Reinforced for Strength\u003c\/strong\u003e\u003cbr\u003eWith 20% glass fiber reinforcement, PPS-GF20 delivers exceptional strength and stiffness—up to 4552 MPa Young’s modulus and 102 MPa bending strength in XY—ideal for brackets, antenna mounts, and chemically exposed parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame-Retardant \u0026amp; Chemically Resistant\u003c\/strong\u003e\u003cbr\u003eUL94 V0 certified at 1.5mm and resistant to acids, bases, oils, and solvents. A trusted option for mission-critical environments such as chemical labs, factory floors, and automotive housings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecise, Reliable, Print-Ready\u003c\/strong\u003e\u003cbr\u003eSupports high-speed printing (up to 250 mm\/s) with minimal warping and stable Z-axis strength. Recommended for hardened steel nozzles. Available in neutral gray for reduced heat absorption and post-processing flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAMS Compatible, Moisture \u0026amp; Tangle Free\u003c\/strong\u003e\u003cbr\u003eDelivered vacuum-sealed and neatly wound, this filament is compatible with Bambu AMS systems. Low moisture absorption (0.11%， 70%RH, 23°C) ensures reliable print quality, even in humid environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHave a different application in mind?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-fiberon-pa612-esd-1-75mm-500g\"\u003eFiberon™ PA612-ESD\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block\"\u003e\n\u003cdiv id=\"panel-1\" role=\"tabpanel\" aria-labelledby=\"tab-1\" tabindex=\"0\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003ePrinting Temperature: 310˚C - 350˚C\u003cbr\u003eBed Temperature: 80˚C - 90˚C\u003cbr\u003ePrinting Speed: up to 250mm\/s\u003cbr\u003eFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1-3mm\u003cbr\u003eRetraction Speed: 20-40mm\/s\u003cbr\u003e\u003cbr\u003eDrying Settings: 100˚C for 10h\u003cbr\u003e\u003cem\u003e(Only if the material has absorbed moisture)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFor even better performance, you can anneal this material for 10 hours @ 130°C\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 310˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eYou may need a filament dryer depending on the humidity of your environment. Keep dry when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/wiki.polymaker.com\/polymaker-products\/printer-profiles\" title=\"https:\/\/wiki.polymaker.com\/polymaker-products\/printer-profiles\" target=\"_blank\"\u003eDownload Printer Profiles\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" title=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" title=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated.pdf?v=1727285624\" title=\"Polymaker 889 Documentation\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" title=\"Polymaker Profile Creation Process\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" title=\"Polymaker ISO9001 CERT\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Fiberon™ PPS-GF20 used for?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eFiberon™ PPS-GF20 is designed for high-temperature, high-performance applications that demand exceptional heat resistance, electrical insulation, and UL94 V0 flame retardant. Common use cases include electronic housings, sensor enclosures, antenna mounts, and parts exposed to harsh industrial environments.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIs PPS-GF20 electrically insulating?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eYes. Unlike carbon fiber composites, PPS-GF20 is electrically insulating. It offers a dielectric strength of 6.05 kV\/mm and low dielectric constants, making it suitable for moderate voltage insulation and high-frequency electronic applications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow heat resistant is PPS-GF20?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eExtremely. When annealed at 130 °C for 10 hours, the material achieves a heat deflection temperature (HDT) of over 230 °C at 0.45 MPa—ideal for high-heat industrial parts and enclosures. At 230 °C annealing, it offers even higher resistance under load (up to 219.6 °C @ 1.8 MPa).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDo I need to anneal PPS-GF20 to achieve its full heat resistance?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWhile the material performs well unannealed, annealing at 130 °C or 230 °C significantly boosts thermal performance. The 130 °C anneal is suitable for most users, while 230 °C offers maximum heat resistance for demanding environments.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat printers and settings work best for PPS-GF20?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePPS-GF20 prints reliably on desktop level 3D printers like the QIDI Plus4 or Bambu H2D. Recommended settings include a 310–350 °C nozzle, 80–90 °C bed, fan off, and hardened steel nozzle. For best results, use PolySupport™ for PA12 and anneal after printing.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIs it compatible with AMS systems?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eYes. Fiberon™ PPS-GF20 works well with Bambu AMS systems. However, due to the stiffness of glass fiber filament, performance may vary on other AMS-like devices depending on tube length and curvature.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDoes PPS-GF20 absorb moisture?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eNo. The material has low moisture sensitivity, with an equilibrium water absorption rate of just 0.11%(70%RH, 23°C). This ensures consistent dimensional accuracy even in humid environments. Nevertheless, moisture adhering to the filament surface can easily cause defects on the surface of the printed part when printing at high temperatures. When using the filament, please pay attention to moisture protection. If you find that the material is damp, please dry it at 100 degrees for 10h before printing.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow strong is PPS-GF20?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eVery strong. It offers up to 102 MPa bending strength and 64 MPa tensile strength (XY), with a Young’s modulus of over 4500 MPa. These specs make it ideal for structural parts that require stiffness and dimensional stability.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat’s the difference between PPS-GF20 and PPS-CF10?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePPS-GF20 replaces the conductive carbon fiber with insulating glass fiber—solving the electrical conductivity issue in PPS-CF10. It retains similar thermal and mechanical properties while being more affordable and chemically resistant.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIs PPS-GF20 flame retardant?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eYes. It is UL94 V0 rated at 1.5 mm, making it suitable for electrical enclosures, automotive parts, and safety-critical applications requiring certified flame resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Polymaker Fiberon PPS-GF20 1.75mm 500g

Product Description

Voxel SKU: PMK-FBR-PPS-G20-500

Vendor: Polymaker

Vendor MPN: FM02001

$81.99

Maximum quantity available reached.

Tags : 1.75mm Fiberon Filaments Polyphenylene sulfide PPS

Related Products

Sale

Polymaker PolyLite PLA 1.75mm 1kg

IN STOCK: 151

$19.99 $27.99

3DLAC for strong ABS (and more) adhesion to glass

IN STOCK: 657

$12.99

{"id":355423505,"title":"3DLAC for strong ABS (and more) adhesion to glass","handle":"3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass","description":"\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY CANADA POST EXPEDITED PARCEL. Any order containing this product with any other services will be cancelled or shipped with Canada Post expedited parcel anyway ***\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Blue Painter's Tape at Voxel Factory\" href=\"https:\/\/voxelfactory.myshopify.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/p\u003e\n\u003cp\u003eFor priority (air) shipping you should order \u003ca title=\"3DLAC Plus adhesive solution at Voxel Factory\" href=\"\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, as its contents are not pressurized.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e\u003cspan\u003e 4\u003c\/span\u003e00mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/span\u003e\u003c\/p\u003e","published_at":"2022-04-12T14:53:10-04:00","created_at":"2014-08-11T15:21:35-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","FreeShippingExcluded","Tools"],"price":1299,"price_min":1299,"price_max":1299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203593756790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEO-3DL-AC1-CAN-400","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DLAC for strong ABS (and more) adhesion to glass","public_title":null,"options":["Default Title"],"price":1299,"weight":500,"compare_at_price":null,"inventory_quantity":60,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322235803","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1739808877"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1739808877","options":["Title"],"media":[{"alt":"3DLAC for strong ABS (and more) adhesion to glass - Voxel Factory -3D printer- Imprimante 3D","id":29007220310252,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1739808877"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1739808877","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY CANADA POST EXPEDITED PARCEL. Any order containing this product with any other services will be cancelled or shipped with Canada Post expedited parcel anyway ***\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Blue Painter's Tape at Voxel Factory\" href=\"https:\/\/voxelfactory.myshopify.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/p\u003e\n\u003cp\u003eFor priority (air) shipping you should order \u003ca title=\"3DLAC Plus adhesive solution at Voxel Factory\" href=\"\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, as its contents are not pressurized.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e\u003cspan\u003e 4\u003c\/span\u003e00mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/span\u003e\u003c\/p\u003e"}

3DLAC for strong ABS (and more) adhesion to glass

$12.99

*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY CANADA POST EXPEDITED PARCEL. Any order containing this product with any other services will be cancelled or shipped with Canada Post expedited parcel anyway *** The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directl...

3DLAC Plus Adhesive Solution 100mL

IN STOCK: 95

$9.99

{"id":3874371698806,"title":"3DLAC Plus Adhesive Solution 100mL","handle":"3dlac-plus-adhesive-solution","description":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with \u003ca href=\"\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. \u003cspan\u003eUseful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike its sibling the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" title=\"3DLAC Spray at Voxel Factory\"\u003e3DLAC Spray\u003c\/a\u003e, this bottle is not pressurized, and can be shipped by air in limited quantities.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e 100mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffffff;\"\u003e\u003cb\u003e3D Lac\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-06-20T17:21:40-04:00","created_at":"2019-06-20T13:48:47-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","Tools"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203505315958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAB-ADH-3DL-BTL-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DLAC Plus Adhesive Solution 100mL","public_title":null,"options":["Default Title"],"price":999,"weight":250,"compare_at_price":null,"inventory_quantity":60,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322240500","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1739809135"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1739809135","options":["Title"],"media":[{"alt":"3DLAC Plus Adhesive Solution 100mL - Voxel Factory -3D printer- Imprimante 3D","id":29007229059308,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1739809135"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1739809135","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with \u003ca href=\"\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. \u003cspan\u003eUseful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike its sibling the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" title=\"3DLAC Spray at Voxel Factory\"\u003e3DLAC Spray\u003c\/a\u003e, this bottle is not pressurized, and can be shipped by air in limited quantities.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e 100mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffffff;\"\u003e\u003cb\u003e3D Lac\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e"}

3DLAC Plus Adhesive Solution 100mL

$9.99

The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! Unlike its sibling the 3DLAC Spray, this bottle...

Brass Nozzle 0.40mm for E3D V6 Hot End

IN STOCK: 0

$9.99

{"id":8859304521,"title":"Brass Nozzle 0.40mm for E3D V6 Hot End","handle":"brass-nozzle-0-4mm-for-e3d-v6-hot-end","description":"\u003cp\u003e0.40mm brass nozzle for E3D v6 hotends.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-02-13T15:00:27-05:00","vendor":"E3D","type":"Open Parts","tags":["0.4mm","e3d","MK2","MK2S","MK3","MK3S","nozzle"],"price":999,"price_min":999,"price_max":999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30803869129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOZ-E3D-HOT-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Brass Nozzle 0.40mm for E3D V6 Hot End","public_title":null,"options":["Default Title"],"price":999,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1739808910"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1739808910","options":["Title"],"media":[{"alt":"Brass Nozzle 0.40mm for E3D V6 Hot End - Voxel Factory -3D printer- Imprimante 3D","id":29057154416876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1739808910"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1739808910","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e0.40mm brass nozzle for E3D v6 hotends.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e"}

Brass Nozzle 0.40mm for E3D V6 Hot End

$9.99

0.40mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.40mm Filament diameter : 1.75mm Thread : M6

Hotend thermistor for Prusa i3 MK2 and MK3

IN STOCK: 6

$14.99

{"id":10411346953,"title":"Hotend thermistor for Prusa i3 MK2 and MK3","handle":"replacement-thermistor-for-prusa-i3-mk2","description":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+ \/ MK3.5\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHotend thermistor (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eConnector: Molex 5057-9402\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCable length: 750 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003ehelp.prusa3d.com\u003c\/span\u003e\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-09-11T12:56:47-04:00","vendor":"E3D","type":"Prusa Research Parts","tags":["MK2","MK2.5","MK2.5S","MK2S","MK3","MK3.5","MK3S","MK3S-Plus"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45180568201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-E3D-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hotend thermistor for Prusa i3 MK2 and MK3","public_title":null,"options":["Default Title"],"price":1499,"weight":100,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1739808996"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1739808996","options":["Title"],"media":[{"alt":"Hotend thermistor for Prusa i3 MK2 and MK3 - Voxel Factory -3D printer- Imprimante 3D","id":28990215454956,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1739808996"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1739808996","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+ \/ MK3.5\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHotend thermistor (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eConnector: Molex 5057-9402\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCable length: 750 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003ehelp.prusa3d.com\u003c\/span\u003e\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Hotend thermistor for Prusa i3 MK2 and MK3

$14.99

Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5 This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To correctly install this replacement part, visit the Prusa Research kno...

Smooth-On XTC-3D® High Performance Coating

IN STOCK: 0

From $17.00

{"id":397267696,"title":"Smooth-On XTC-3D® High Performance Coating","handle":"xtc-3d-high-performance-3d-print-coating","description":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2014-12-23T10:02:00-05:00","created_at":"2014-12-23T10:11:58-05:00","vendor":"Smooth-On","type":"Tools","tags":["Tools"],"price":1700,"price_min":1700,"price_max":4800,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1072896796,"title":"6.4 Oz","option1":"6.4 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-064-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Smooth-On XTC-3D® High Performance Coating - 6.4 Oz","public_title":"6.4 Oz","options":["6.4 Oz"],"price":1700,"weight":500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696211","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":3620344261,"title":"24 Oz","option1":"24 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-240-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Smooth-On XTC-3D® High Performance Coating - 24 Oz","public_title":"24 Oz","options":["24 Oz"],"price":4800,"weight":1000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696419","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1739808879","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1739808880","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1739808881"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1739808879","options":["Size"],"media":[{"alt":"Smooth-On XTC-3D® High Performance Coating - Voxel Factory -3D printer- Imprimante 3D","id":29008343531756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1739808879"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1739808879","width":1400},{"alt":"Smooth-On XTC-3D® High Performance Coating - Voxel Factory -3D printer- Imprimante 3D","id":29008343892204,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1739808880"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1739808880","width":1400},{"alt":"Smooth-On XTC-3D® High Performance Coating - Voxel Factory -3D printer- Imprimante 3D","id":29008344613100,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1739808881"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1739808881","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e"}

Smooth-On XTC-3D® High Performance Coating

$17.00

* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.) *** -> Hacking t-glase to look more like glass! <- *** XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels...

Size

6.4 Oz

24 Oz

E3D Heater Cartridge 24V for Prusa i3 MK3/S/+

IN STOCK: 0

$11.99

{"id":1632151240822,"title":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S\/+","handle":"replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3","description":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e","published_at":"2017-12-13T14:22:45-05:00","created_at":"2018-06-26T15:13:03-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK3","MK3S","MK3S-Plus"],"price":1199,"price_min":1199,"price_max":1199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14699569348726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-HTC-E3D-040-24V","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S\/+","public_title":null,"options":["Default Title"],"price":1199,"weight":100,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1739809054"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1739809054","options":["Title"],"media":[{"alt":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S - Voxel Factory -3D printer- Imprimante 3D","id":28990234001644,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1739809054"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1739809054","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e"}

E3D Heater Cartridge 24V for Prusa i3 MK3/S/+

$11.99

Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+

Bed Thermistor for Prusa i3 MK2 and MK3 - Voxel Factory -3D printer- Imprimante 3D

Heatbed Thermistor for Prusa i3 MK2 and MK3

IN STOCK: 0

$7.94

{"id":760333434998,"title":"Heatbed Thermistor for Prusa i3 MK2 and MK3","handle":"replacement-bed-thermistor-for-prusa-i3-mk3","description":"\u003cp\u003e\u003cspan\u003eReplacement heatbed thermistor set for the \u003c\/span\u003e\u003cstrong\u003eOriginal Prusa MK2\/S, MK2.5\/S,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMK3\/S\/+\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cstrong\u003eMINI\/+\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeatbed thermistor (1 pcs)\u003c\/li\u003e\n\u003cli\u003eKapton tape (1 pcs)\u003c\/li\u003e\n\u003cli\u003eAluminum tape (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnector: Molex 5057-9402\u003c\/li\u003e\n\u003cli\u003eCable length: 650 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e\u003c\/span\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2018-04-24T14:17:29-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MINI","MINI-Plus","MK2","MK2.5","MK2.5S","MK2S","MK3","MK3S","MK3S-Plus"],"price":794,"price_min":794,"price_max":794,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8128603160694,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-BED-MK3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Heatbed Thermistor for Prusa i3 MK2 and MK3","public_title":null,"options":["Default Title"],"price":794,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1_1400x_32b3e6ed-cb81-41fc-b94e-4c1ccc570709.jpg?v=1739809040"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1_1400x_32b3e6ed-cb81-41fc-b94e-4c1ccc570709.jpg?v=1739809040","options":["Title"],"media":[{"alt":"Bed Thermistor for Prusa i3 MK2 and MK3 - Voxel Factory -3D printer- Imprimante 3D","id":29022054056172,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1_1400x_32b3e6ed-cb81-41fc-b94e-4c1ccc570709.jpg?v=1739809040"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1_1400x_32b3e6ed-cb81-41fc-b94e-4c1ccc570709.jpg?v=1739809040","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eReplacement heatbed thermistor set for the \u003c\/span\u003e\u003cstrong\u003eOriginal Prusa MK2\/S, MK2.5\/S,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMK3\/S\/+\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cstrong\u003eMINI\/+\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeatbed thermistor (1 pcs)\u003c\/li\u003e\n\u003cli\u003eKapton tape (1 pcs)\u003c\/li\u003e\n\u003cli\u003eAluminum tape (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnector: Molex 5057-9402\u003c\/li\u003e\n\u003cli\u003eCable length: 650 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e\u003c\/span\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Heatbed Thermistor for Prusa i3 MK2 and MK3

$7.94

Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm To correctly install this replacement part, visit the Prusa Research knowledge base at hel...

Materio3D Regular PLA 4043D - 1.75mm 1kg

IN STOCK: 0

$24.99

{"id":7661013500140,"title":"Materio3D Regular PLA 4043D - 1.75mm 1kg","handle":"materio3d-regular-pla-4043d-1-75mm-1kg","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMeet the new Materio3D Regular PLA filament!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMaterio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- It prints exceptionally well and the final print result is of high quality.\u003cbr\u003e- This filament is stiff but a little more brittle than Materio3D's Tough PLA. \u003cbr\u003e- It is the most economical filament in the PLA range from Materio3D!\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEasy-of-use for great prints, every time!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDiameter :\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.75\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003emm\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eColor :\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLava Rock \u003c\/strong\u003e\u003cb data-mce-fragment=\"1\"\u003eBlack, Cold White, Lunar Grey, Lemon Yellow and Dragon Red\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAll Materio3D filaments are manufactured in Saint-Hubert, Québec, inside the brand new store of Voxel Factory. The Materio3D Regular PLA is made with NatureWorks 4043D.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003ePlease note : when using a palette system, such as the\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/mosaic-manufacturing-3d-printers-and-add-on\/products\/mosaic-manufacturing-palette-3-pro\" target=\"_blank\"\u003e Mosaic Manufacturing Palette 3 PRO\u003c\/a\u003e, we recommend to use \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/materio3d\/products\/materio3d-tough-pla-3d870-1-75mm-1kg\" target=\"_blank\"\u003eMaterio3D's Tough PLA 3D870\u003c\/a\u003e filament instead.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h5\u003e\n\u003cspan style=\"color: #000000;\"\u003eCompatible with :\u003c\/span\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e- Prusa MK3\/MK3S\/\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/original-prusa-i3-mk3s-plus-diy-kit\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/original-prusa-i3-mk3s-plus-diy-kit\" target=\"_blank\"\u003eMK3S+\u003c\/a\u003e and Prusa Mini\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e-\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-single-extruder-3d-printer\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-single-extruder-3d-printer\" target=\"_blank\"\u003eSindoh 3DWOX1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-3dwox2x-dual-extrusion\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-3dwox2x-dual-extrusion\" target=\"_blank\"\u003eSindoh 3DWOX 2X\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eMatérial: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNatureWorks Ingeo 4043D PLA\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVendor: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMaterio3D\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDiameter Tolerance: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e±\u003c\/span\u003e0.03mm\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eQuantity: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDensity:\u003c\/span\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003ePrinting Tips\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003ePrint temp: \u003cstrong\u003e190\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e°C - 230°C\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNozzle: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eany size\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint speed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e30mm\/s to 100+\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRetraction: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003echeck your printer documentation!\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHot print bed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e50°C - 70°C\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCold print bed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eyes\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e(use \u003c\/span\u003e\u003ca title=\"3M #2090 Blue Painter's Tape 48mm x 54.8m roll\" href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003e3M #2090\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e and\/or \u003c\/span\u003e\u003ca title=\"3DLac\" href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" target=\"_blank\"\u003e3DLac\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePost processing: \u003cb\u003e-\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/div\u003e","published_at":"2022-06-08T16:55:42-04:00","created_at":"2022-06-08T08:59:47-04:00","vendor":"Materio3D","type":"Materio3D 1.75 Filaments","tags":[],"price":2499,"price_min":2499,"price_max":2499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42857284862188,"title":"Lava Rock Black","option1":"Lava Rock Black","option2":null,"option3":null,"sku":"M3D-RPL-175-BLK-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37157989286124,"product_id":7661013500140,"position":2,"created_at":"2022-06-08T16:51:03-04:00","updated_at":"2025-02-17T11:33:59-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039","variant_ids":[42857284862188]},"available":false,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Lava Rock Black","public_title":"Lava Rock Black","options":["Lava Rock Black"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":-12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":29736110096620,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":42857284894956,"title":"Cold White","option1":"Cold White","option2":null,"option3":null,"sku":"M3D-RPL-175-WHT-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37157989744876,"product_id":7661013500140,"position":3,"created_at":"2022-06-08T16:51:17-04:00","updated_at":"2025-02-17T11:34:01-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041","variant_ids":[42857284894956]},"available":false,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Cold White","public_title":"Cold White","options":["Cold White"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":29736110588140,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":43294720819436,"title":"Lunar Grey","option1":"Lunar Grey","option2":null,"option3":null,"sku":"M3D-RPL-175-LUN-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37806357053676,"product_id":7661013500140,"position":4,"created_at":"2022-09-22T15:50:35-04:00","updated_at":"2025-02-17T11:34:02-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042","variant_ids":[43294720819436]},"available":false,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Lunar Grey","public_title":"Lunar Grey","options":["Lunar Grey"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30442305028332,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":43294720852204,"title":"Lemon Yellow","option1":"Lemon Yellow","option2":null,"option3":null,"sku":"M3D-RPL-175-LEM-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37806357381356,"product_id":7661013500140,"position":5,"created_at":"2022-09-22T15:50:52-04:00","updated_at":"2025-02-17T11:34:02-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042","variant_ids":[43294720852204]},"available":false,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Lemon Yellow","public_title":"Lemon Yellow","options":["Lemon Yellow"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30442305421548,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":43296220053740,"title":"Dragon Red","option1":"Dragon Red","option2":null,"option3":null,"sku":"M3D-RPL-175-DRA-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37834949787884,"product_id":7661013500140,"position":6,"created_at":"2022-09-27T12:03:47-04:00","updated_at":"2025-02-17T11:34:04-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044","variant_ids":[43296220053740]},"available":false,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Dragon Red","public_title":"Dragon Red","options":["Dragon Red"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30473903964396,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PLA-4043D-175mm-1kg-COLLECTION-2.jpg?v=1739810038","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PLA-4043D-175mm-1kg-COLLECTION-2.jpg?v=1739810038","options":["Color"],"media":[{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30473900556524,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PLA-4043D-175mm-1kg-COLLECTION-2.jpg?v=1739810038"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PLA-4043D-175mm-1kg-COLLECTION-2.jpg?v=1739810038","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":29736110096620,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":29736110588140,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30442305028332,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30442305421548,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30473903964396,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMeet the new Materio3D Regular PLA filament!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMaterio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- It prints exceptionally well and the final print result is of high quality.\u003cbr\u003e- This filament is stiff but a little more brittle than Materio3D's Tough PLA. \u003cbr\u003e- It is the most economical filament in the PLA range from Materio3D!\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEasy-of-use for great prints, every time!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDiameter :\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.75\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003emm\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eColor :\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLava Rock \u003c\/strong\u003e\u003cb data-mce-fragment=\"1\"\u003eBlack, Cold White, Lunar Grey, Lemon Yellow and Dragon Red\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAll Materio3D filaments are manufactured in Saint-Hubert, Québec, inside the brand new store of Voxel Factory. The Materio3D Regular PLA is made with NatureWorks 4043D.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003ePlease note : when using a palette system, such as the\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/mosaic-manufacturing-3d-printers-and-add-on\/products\/mosaic-manufacturing-palette-3-pro\" target=\"_blank\"\u003e Mosaic Manufacturing Palette 3 PRO\u003c\/a\u003e, we recommend to use \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/materio3d\/products\/materio3d-tough-pla-3d870-1-75mm-1kg\" target=\"_blank\"\u003eMaterio3D's Tough PLA 3D870\u003c\/a\u003e filament instead.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h5\u003e\n\u003cspan style=\"color: #000000;\"\u003eCompatible with :\u003c\/span\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e- Prusa MK3\/MK3S\/\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/original-prusa-i3-mk3s-plus-diy-kit\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/original-prusa-i3-mk3s-plus-diy-kit\" target=\"_blank\"\u003eMK3S+\u003c\/a\u003e and Prusa Mini\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e-\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-single-extruder-3d-printer\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-single-extruder-3d-printer\" target=\"_blank\"\u003eSindoh 3DWOX1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-3dwox2x-dual-extrusion\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-3dwox2x-dual-extrusion\" target=\"_blank\"\u003eSindoh 3DWOX 2X\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eMatérial: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNatureWorks Ingeo 4043D PLA\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVendor: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMaterio3D\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDiameter Tolerance: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e±\u003c\/span\u003e0.03mm\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eQuantity: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDensity:\u003c\/span\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003ePrinting Tips\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003ePrint temp: \u003cstrong\u003e190\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e°C - 230°C\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNozzle: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eany size\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint speed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e30mm\/s to 100+\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRetraction: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003echeck your printer documentation!\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHot print bed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e50°C - 70°C\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCold print bed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eyes\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e(use \u003c\/span\u003e\u003ca title=\"3M #2090 Blue Painter's Tape 48mm x 54.8m roll\" href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003e3M #2090\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e and\/or \u003c\/span\u003e\u003ca title=\"3DLac\" href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" target=\"_blank\"\u003e3DLac\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePost processing: \u003cb\u003e-\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/div\u003e"}

Materio3D Regular PLA 4043D - 1.75mm 1kg

$24.99

Meet the new Materio3D Regular PLA filament! Materio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA. - It prints exceptionally well and the final print result is of high quality.- This filament is stiff but a little more brittle than Materio3D's Tough PLA. - It is the most economical filament in the PLA range...

Color

Ultimaker PLA 2.85mm 750g

IN STOCK: 109

$83.84

Pro Silicone sock for E3D v6 Hotend (pack of 3)

IN STOCK: 41

$7.49

{"id":4509830512758,"title":"Pro Silicone sock for E3D v6 Hotend (pack of 3)","handle":"pro-silicone-sock-for-e3d-v6-hotend-pack-of-3","description":"\u003cp\u003e\u003cspan\u003eThese socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMade of a heat-resistant, non-stick silicone material our sock will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/original-e3d-v6-1-hotend-for-prusa-i3-mk3\" title=\"E3D v6 Hotend for Prusa i3 MK3\/S printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eE3D v6 Hotend\u003c\/a\u003e and other hotends using the E3D v6 style heater block.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/silicone-sock-for-e3d-v6-hotend-pack-of-3\" title=\"Silicone sock for E3D v6 Hotend\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eregular version\u003c\/a\u003e, which doesn't cover the nozzle as much.\u003c\/p\u003e","published_at":"2020-05-25T15:37:41-04:00","created_at":"2020-05-22T16:30:34-04:00","vendor":"E3D","type":"Open Parts","tags":["e3d","Hotend","MK2","MK2.5","MK2S","MK3","MK3S"],"price":749,"price_min":749,"price_max":749,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31778922430582,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-SOK-PRO-0V6-003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pro Silicone sock for E3D v6 Hotend (pack of 3)","public_title":null,"options":["Default Title"],"price":749,"weight":100,"compare_at_price":null,"inventory_quantity":41,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/open-parts-pro-silicone-sock-for-e3d-v6-hotend-pack-of-3-1_1400x_d16a565a-4f03-4900-b50e-f4045b571da4.jpg?v=1739809199"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/open-parts-pro-silicone-sock-for-e3d-v6-hotend-pack-of-3-1_1400x_d16a565a-4f03-4900-b50e-f4045b571da4.jpg?v=1739809199","options":["Title"],"media":[{"alt":"Pro Silicone sock for E3D v6 Hotend (pack of 3) - Voxel Factory -3D printer- Imprimante 3D","id":28984548262124,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/open-parts-pro-silicone-sock-for-e3d-v6-hotend-pack-of-3-1_1400x_d16a565a-4f03-4900-b50e-f4045b571da4.jpg?v=1739809199"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/open-parts-pro-silicone-sock-for-e3d-v6-hotend-pack-of-3-1_1400x_d16a565a-4f03-4900-b50e-f4045b571da4.jpg?v=1739809199","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThese socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMade of a heat-resistant, non-stick silicone material our sock will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/original-e3d-v6-1-hotend-for-prusa-i3-mk3\" title=\"E3D v6 Hotend for Prusa i3 MK3\/S printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eE3D v6 Hotend\u003c\/a\u003e and other hotends using the E3D v6 style heater block.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/silicone-sock-for-e3d-v6-hotend-pack-of-3\" title=\"Silicone sock for E3D v6 Hotend\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eregular version\u003c\/a\u003e, which doesn't cover the nozzle as much.\u003c\/p\u003e"}

Pro Silicone sock for E3D v6 Hotend (pack of 3)

$7.49

These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.Made of a heat-resistant, non-stick silicone material our sock will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled ...

Materio3D PETG 1.75mm 1kg

IN STOCK: 8

$29.99

{"id":7466166976748,"title":"Materio3D PETG 1.75mm 1kg","handle":"materio3d-petg-1-75mm-1kg","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eMaterio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eDiameter : \u003cstrong data-mce-fragment=\"1\"\u003e1.75mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eColor: \u003cstrong data-mce-fragment=\"1\"\u003eRockies Cold White, Atlas Coal Black, Montréal Roadworks Orange\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2021-11-27T11:25:22-05:00","created_at":"2021-11-27T11:25:22-05:00","vendor":"Materio3D","type":"Materio3D 1.75 Filaments","tags":["1.75mm","Filament","Made in Canada","Materio3D","petg","temp"],"price":2999,"price_min":2999,"price_max":2999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42115471900908,"title":"Atlas Coal Black","option1":"Atlas Coal Black","option2":null,"option3":null,"sku":"M3D-PEG-175-COA-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":36224335511788,"product_id":7466166976748,"position":2,"created_at":"2021-11-27T11:27:56-05:00","updated_at":"2025-02-17T11:29:55-05:00","alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-AtlasCoal-Black.jpg?v=1739809795","variant_ids":[42115471900908]},"available":false,"name":"Materio3D PETG 1.75mm 1kg - Atlas Coal Black","public_title":"Atlas Coal Black","options":["Atlas Coal Black"],"price":2999,"weight":1500,"compare_at_price":null,"inventory_quantity":-23,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":28772743053548,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-AtlasCoal-Black.jpg?v=1739809795"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":42115472031980,"title":"Montréal Roadworks Orange","option1":"Montréal Roadworks Orange","option2":null,"option3":null,"sku":"M3D-PEG-175-TFC-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":36224337182956,"product_id":7466166976748,"position":3,"created_at":"2021-11-27T11:28:11-05:00","updated_at":"2025-02-17T11:29:56-05:00","alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-MTLroadworks-Orange.jpg?v=1739809796","variant_ids":[42115472031980]},"available":true,"name":"Materio3D PETG 1.75mm 1kg - Montréal Roadworks Orange","public_title":"Montréal Roadworks Orange","options":["Montréal Roadworks Orange"],"price":2999,"weight":1500,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":28772744757484,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-MTLroadworks-Orange.jpg?v=1739809796"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":42115472064748,"title":"Rockies Cold White","option1":"Rockies Cold White","option2":null,"option3":null,"sku":"M3D-PEG-175-ROC-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":36224338362604,"product_id":7466166976748,"position":4,"created_at":"2021-11-27T11:28:28-05:00","updated_at":"2025-02-17T11:29:57-05:00","alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-RockiesCold-White.jpg?v=1739809797","variant_ids":[42115472064748]},"available":false,"name":"Materio3D PETG 1.75mm 1kg - Rockies Cold White","public_title":"Rockies Cold White","options":["Rockies Cold White"],"price":2999,"weight":1500,"compare_at_price":null,"inventory_quantity":-6,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":28772745937132,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-RockiesCold-White.jpg?v=1739809797"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PETG-175mm-1kg-COLLECTION.jpg?v=1739809794","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-AtlasCoal-Black.jpg?v=1739809795","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-MTLroadworks-Orange.jpg?v=1739809796","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-RockiesCold-White.jpg?v=1739809797"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PETG-175mm-1kg-COLLECTION.jpg?v=1739809794","options":["Color"],"media":[{"alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":28772738695404,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PETG-175mm-1kg-COLLECTION.jpg?v=1739809794"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PETG-175mm-1kg-COLLECTION.jpg?v=1739809794","width":1400},{"alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":28772743053548,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-AtlasCoal-Black.jpg?v=1739809795"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-AtlasCoal-Black.jpg?v=1739809795","width":1400},{"alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":28772744757484,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-MTLroadworks-Orange.jpg?v=1739809796"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-MTLroadworks-Orange.jpg?v=1739809796","width":1400},{"alt":"Materio3D PETG 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":28772745937132,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-RockiesCold-White.jpg?v=1739809797"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Materio3d-PETG-175mm-1kg-RockiesCold-White.jpg?v=1739809797","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eMaterio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eDiameter : \u003cstrong data-mce-fragment=\"1\"\u003e1.75mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eColor: \u003cstrong data-mce-fragment=\"1\"\u003eRockies Cold White, Atlas Coal Black, Montréal Roadworks Orange\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e"}

Materio3D PETG 1.75mm 1kg

$29.99

Materio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance. Diameter : 1.75mm Color: Rockies Cold White, Atlas Coal Black, Montréal Roadworks Orange

Color