{"id":9079059513580,"title":"Formlabs Form Cure L V2","handle":"formlabs-form-cure-l-v2","description":"\u003cp\u003e\u003cstrong\u003e** Basic Warranty of 1 Year\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eForm Cure L V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure large Form 4L\/BL prints in as little as 60 seconds, with 5x more UV power, faster heat-up times, and a 26% reduction in overall footprint from the previous generation while curing up to 19% larger parts. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePost-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePost-Cure Most Large Resin Parts in 60 Seconds\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRapid curing and quick heat up for consistent, validated results and effortless post-curing of large resin 3D prints.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBlazing Fast Curing\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e5-6x faster cure cycles and 40% quicker heat up times than the previous generation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eNear instant heat-up:\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e60 °C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIN 150 SECONDS*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csub\u003e*(230V version)\u003c\/sub\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e80 °C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIN 360 SECONDS*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csub\u003e*(230V version)\u003c\/sub\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFast curing:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Purpose Resins\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ein 60 seconds\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineering \u0026amp; Biocompatible Resins\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ein 3-15 minutes\u003c\/span\u003e \u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eConsistent, Validated Results\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized for reliable and repeatable curing performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003eConvection heating system that reaches temperatures up to 100 °C\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e96 multi-directional LEDs that provide a uniform irradiance of 14.5 mW\/cm2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePost-Cure Large Parts\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned to fit everything from the largest Form 4L parts to full production batches\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e353 mm x 196 mm x 365 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e404 mm diameter rotating turntable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003eMaximum part height 365 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eEasier Than Ever\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact new design makes curing as easy as pushing a button, completing the Form 4L Ecosystem.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e45+ pre-programmed cure profiles\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003eEasy-to-clean glass turntable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e26% smaller footprint while curing 19% larger parts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eForm 4L Workflow in Minutes\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eForm Cure L is part of a 3D printing ecosystem that’s easy to learn and use, and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4L, from software, to materials, printing, and post-processing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"Form 4L Workflow: Large-Format 3D Printing Made Easy\" src=\"https:\/\/www.youtube.com\/embed\/yH6qTeDk7sM\" style=\"width: 100%;\" height=\"344\" width=\"612\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eTech Specs\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eForm Cure L V2\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eForm Cure L V1\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eForm Cure V2\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eForm Cure V1\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003ePrinter Compatibility\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4L, Form 4BL, Form 4, Form 4B, Form 3\/B\/+, Form 2\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4, Form 4B, Form 3\/B\/+, Form 2\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4, Form 4B, Form 3\/B\/+, Form 2\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 3\/B\/+, Form 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e507 × 543 × 545 mm\u003cbr\u003e20.0 × 21.4 × 21.5 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e690 x 540 x 445 mm\u003cbr\u003e27.2 x 21.3 x 17.5 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e337 × 404 × 372 mm\u003cbr\u003e13.3 × 14.0 × 15.9 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e262 x 262 x 340 mm\u003cbr\u003e10.3 x 10.3 x 13.4 in\u003cbr\u003eHeight when open: 640 mm (25.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e40.0 kg\u003cbr\u003e88.2 lb\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e24 kg\u003cbr\u003e53 lb\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e12.1 kg\u003cbr\u003e26.7 lb\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e5.6 kg\u003cbr\u003e12.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eTurntable Dimeter\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e404 mm\u003cbr\u003e15.9 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e395 mm\u003cbr\u003e15.6 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e235 mm\u003cbr\u003e9.25 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e193 mm\u003cbr\u003e7.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eMaximum Part Height\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e365 mm\u003cbr\u003e14.4 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e320 mm\u003cbr\u003e12.6 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e245 mm\u003cbr\u003e9.64 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e185 mm\u003cbr\u003e7.28 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eMaximum Cure Chamber Temperature\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e100 °C\u003cbr\u003e212 °F\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e80 °C\u003cbr\u003e176 °F\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e100 °C\u003cbr\u003e212 °F\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e80 °C\u003cbr\u003e176 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eLight Source\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e96 multi-directional LEDs\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45 multi-directional LEDs\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e48 multi-directional LEDs\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e13 multi-directional LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eLED Power\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e350 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e70 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e150 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e39 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eLED Radiant\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e120 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e36 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e50 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e9.1 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eLED Wavelength\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e405 nm\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e375 nm, 405 nm\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e405 nm\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003ePower Requirements\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eInput (NA): 100 – 125 VAC, 50–60Hz, 15 A\u003cbr\u003eInput (EU): 220 – 240 VAC, 50–60Hz, 8 A\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eInput (NA) 100 - 120 V VAC, 50-60 Hz, 15 A\u003cbr\u003eInput (EU) 220 - 240 V VAC, 50-60 Hz, 8 A\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eInput (NA) 100 - 120 V VAC, 50-60 Hz, 15 A\u003cbr\u003eInput (EU) 220 - 240 V VAC, 50-60 Hz, 8 A\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90–240 V 6.0 A 50\/60 Hz 144 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctfoot\u003e\u003c\/tfoot\u003e\n\u003c\/table\u003e","published_at":"2025-11-13T16:38:18-05:00","created_at":"2025-11-13T11:58:03-05:00","vendor":"Formlabs","type":"Formlabs 3D Printers","tags":["cure","form 2","form 3","Form 3B","Form 3BL","form 3L","Form 4","Form 4B","Form 4BL","Form 4L","formlabs","resin","sla"],"price":643500,"price_min":643500,"price_max":643500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46989552124140,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-CUR-00L-0V2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Formlabs Form Cure L V2","public_title":null,"options":["Default Title"],"price":643500,"weight":42000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_product_picture.webp?v=1763052248","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_Light_On.webp?v=1763052247","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_Opened.webp?v=1763052247"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_product_picture.webp?v=1763052248","options":["Title"],"media":[{"alt":"Cure L V2","id":36267410489580,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_product_picture.webp?v=1763052248"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_product_picture.webp?v=1763052248","width":1400},{"alt":"Cure L V2 Light On","id":36267410424044,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_Light_On.webp?v=1763052247"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_Light_On.webp?v=1763052247","width":1400},{"alt":"Cure L V2 Opened","id":36267410456812,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_Opened.webp?v=1763052247"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Cure_L_V2_Opened.webp?v=1763052247","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e** Basic Warranty of 1 Year\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eForm Cure L V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure large Form 4L\/BL prints in as little as 60 seconds, with 5x more UV power, faster heat-up times, and a 26% reduction in overall footprint from the previous generation while curing up to 19% larger parts. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePost-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePost-Cure Most Large Resin Parts in 60 Seconds\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRapid curing and quick heat up for consistent, validated results and effortless post-curing of large resin 3D prints.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBlazing Fast Curing\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e5-6x faster cure cycles and 40% quicker heat up times than the previous generation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eNear instant heat-up:\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e60 °C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIN 150 SECONDS*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csub\u003e*(230V version)\u003c\/sub\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e80 °C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIN 360 SECONDS*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csub\u003e*(230V version)\u003c\/sub\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFast curing:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Purpose Resins\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ein 60 seconds\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineering \u0026amp; Biocompatible Resins\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ein 3-15 minutes\u003c\/span\u003e \u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eConsistent, Validated Results\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized for reliable and repeatable curing performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003eConvection heating system that reaches temperatures up to 100 °C\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e96 multi-directional LEDs that provide a uniform irradiance of 14.5 mW\/cm2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePost-Cure Large Parts\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned to fit everything from the largest Form 4L parts to full production batches\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e353 mm x 196 mm x 365 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e404 mm diameter rotating turntable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003eMaximum part height 365 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eEasier Than Ever\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact new design makes curing as easy as pushing a button, completing the Form 4L Ecosystem.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e45+ pre-programmed cure profiles\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003eEasy-to-clean glass turntable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cspan\u003e26% smaller footprint while curing 19% larger parts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eForm 4L Workflow in Minutes\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eForm Cure L is part of a 3D printing ecosystem that’s easy to learn and use, and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4L, from software, to materials, printing, and post-processing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"Form 4L Workflow: Large-Format 3D Printing Made Easy\" src=\"https:\/\/www.youtube.com\/embed\/yH6qTeDk7sM\" style=\"width: 100%;\" height=\"344\" width=\"612\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eTech Specs\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eForm Cure L V2\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eForm Cure L V1\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eForm Cure V2\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eForm Cure V1\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003ePrinter Compatibility\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4L, Form 4BL, Form 4, Form 4B, Form 3\/B\/+, Form 2\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4, Form 4B, Form 3\/B\/+, Form 2\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4, Form 4B, Form 3\/B\/+, Form 2\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 3\/B\/+, Form 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e507 × 543 × 545 mm\u003cbr\u003e20.0 × 21.4 × 21.5 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e690 x 540 x 445 mm\u003cbr\u003e27.2 x 21.3 x 17.5 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e337 × 404 × 372 mm\u003cbr\u003e13.3 × 14.0 × 15.9 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e262 x 262 x 340 mm\u003cbr\u003e10.3 x 10.3 x 13.4 in\u003cbr\u003eHeight when open: 640 mm (25.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e40.0 kg\u003cbr\u003e88.2 lb\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e24 kg\u003cbr\u003e53 lb\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e12.1 kg\u003cbr\u003e26.7 lb\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e5.6 kg\u003cbr\u003e12.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eTurntable Dimeter\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e404 mm\u003cbr\u003e15.9 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e395 mm\u003cbr\u003e15.6 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e235 mm\u003cbr\u003e9.25 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e193 mm\u003cbr\u003e7.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eMaximum Part Height\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e365 mm\u003cbr\u003e14.4 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e320 mm\u003cbr\u003e12.6 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e245 mm\u003cbr\u003e9.64 in\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e185 mm\u003cbr\u003e7.28 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eMaximum Cure Chamber Temperature\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e100 °C\u003cbr\u003e212 °F\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e80 °C\u003cbr\u003e176 °F\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e100 °C\u003cbr\u003e212 °F\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e80 °C\u003cbr\u003e176 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eLight Source\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e96 multi-directional LEDs\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e45 multi-directional LEDs\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e48 multi-directional LEDs\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e13 multi-directional LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eLED Power\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e350 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e70 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e150 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e39 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eLED Radiant\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e120 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e36 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e50 W\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e9.1 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003eLED Wavelength\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e405 nm\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e375 nm, 405 nm\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e405 nm\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\" scope=\"row\"\u003ePower Requirements\u003c\/th\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eInput (NA): 100 – 125 VAC, 50–60Hz, 15 A\u003cbr\u003eInput (EU): 220 – 240 VAC, 50–60Hz, 8 A\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eInput (NA) 100 - 120 V VAC, 50-60 Hz, 15 A\u003cbr\u003eInput (EU) 220 - 240 V VAC, 50-60 Hz, 8 A\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eInput (NA) 100 - 120 V VAC, 50-60 Hz, 15 A\u003cbr\u003eInput (EU) 220 - 240 V VAC, 50-60 Hz, 8 A\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e90–240 V 6.0 A 50\/60 Hz 144 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctfoot\u003e\u003c\/tfoot\u003e\n\u003c\/table\u003e"}
Formlabs Form Cure L V2
Related Products
{"id":6920360493236,"title":"Formlabs Form Cure L","handle":"form-cure-l","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cstrong\u003eSave time, minimize effort and maximize efficiency with the automated, large format post-processing Form Cure L machine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe \u003ca href=\"https:\/\/formlabs.com\/post-processing\/wash-l-cure-l\/\" target=\"_blank\"\u003eFormlabs Form Cure L\u003c\/a\u003e exposes 3D printed parts to the appropriate levels of light and heat to optimize material properties. It\u003c\/span\u003e uses heat, UV light, and consistent universal exposure to bring parts to their peak mechanical properties and dimensional accuracy.\u003c\/p\u003e\n\u003cp class=\"Header_headerText__qRPu1 Header_as-h4__Km2q1 Header_weight-600__cbwqO undefined\"\u003e\u003cstrong\u003eOptimized for Formlabs Materials\u003c\/strong\u003e - You can use the pre-programmed cure settings or save your own frequently used custom profiles to improve post-processing efficiency.\u003c\/p\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cp class=\"Header_headerText__qRPu1 Header_as-h4__Km2q1 Header_weight-600__cbwqO undefined\"\u003e\u003cstrong\u003eRapid, High-Intensity Curing - \u003c\/strong\u003eTwo 500W heaters bring temperatures up to 80°C in less than 10 minutes while three UV light modules emit the optimal wavelength of light for fast, effective curing. Once the chamber is heated, 3 LED modules trigger the post-curing reaction, bringing parts to their maximum mechanical properties.\u003c\/p\u003e\n\u003cdiv class=\"section-4529912 Grid_section__Nq73A\" id=\"Build volume \u0026amp; Technology\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"section-b7458909-487c-4496-baa7-4f43c6239e19 Grid_section__Nq73A\"\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-margin-x__V_FSm\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-24__MkyB1 Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv class=\"CombinedHeadlines_removeMarginChildren__Ud8g7\"\u003e\n\u003cp class=\"Header_headerText__qRPu1 Header_as-h4__Km2q1 Header_weight-600__cbwqO undefined\"\u003e\u003cstrong\u003eConsistent Universal Exposure - \u003c\/strong\u003eThe Form Cure L has a reflective inner cavity and rotating glass turntable that ensure the UV light to reach all the surfaces of the part for a consistent cure.\u003c\/p\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cp\u003e\u003cem\u003eForm Cure L and Form Wash L have been validated in FDA-cleared workflows and are compatible with biocompatible, sterilizable materials made in the Formlabs ISO 13485 facility.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch4\u003e\u003cspan\u003ePrinter Compatibility\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eForm 3L, Form 3BL, Form 3, Form 3B, Form 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003ch4\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ch4\u003e\u003cspan\u003eDimensions \u0026amp; Weight\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDimensions : 69.0 x 54.0 x 44.5 cm (27.2 x 21.3 x 17.5 in)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeight : \u003c\/span\u003e24kg (\u003cspan\u003e53 lb) \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eTurntable Diameter : \u003c\/span\u003e39.5 cm (\u003cspan\u003e15.6 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMaximum Part Height : \u003c\/span\u003e32 cm (\u003cspan\u003e12.6 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch4\u003e\u003cspan\u003eTemperatures, Lights, Power \u0026amp; Heater\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eOperating Temperature : \u003c\/span\u003eSuggested 18—28 °C \u003cspan\u003e(64—82 °F)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMaximum Cure Chamber : \u003c\/span\u003e80 °C (\u003cspan\u003e176 °F)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeaters : Dual 500W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLight Source : \u003c\/span\u003e45 multi-directional LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLED Power : \u003c\/span\u003e70W\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLED Wavelength : \u003c\/span\u003e375 nm, 405nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower Requirements : \u003c\/span\u003eInput (NA) 100 - 120 VAC, 50-60Hz, 15A - \u003cspan\u003eInput (EU) 220 - 240 VAC, 50-60Hz, 8A\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2022-03-09T11:26:54-05:00","created_at":"2021-10-13T13:41:17-04:00","vendor":"Formlabs","type":"Formlabs 3D Printers","tags":["cure","formlabs"],"price":643500,"price_min":643500,"price_max":643500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40806546374836,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-CUR-3L0-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Formlabs Form Cure L","public_title":null,"options":["Default Title"],"price":643500,"weight":31500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"0851976006622","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image1.jpg?v=1739809574","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image2.jpg?v=1739809575","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image3.jpg?v=1739809576","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image4.jpg?v=1739809577"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image1.jpg?v=1739809574","options":["Title"],"media":[{"alt":"Form Cure L - Formlabs - Voxel Factory -3D printer- Imprimante 3D","id":29298104369388,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image1.jpg?v=1739809574"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image1.jpg?v=1739809574","width":1400},{"alt":"Form Cure L - Formlabs - Voxel Factory -3D printer- Imprimante 3D","id":29298104598764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image2.jpg?v=1739809575"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image2.jpg?v=1739809575","width":1400},{"alt":"Form Cure L - Formlabs - Voxel Factory -3D printer- Imprimante 3D","id":29298105581804,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image3.jpg?v=1739809576"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image3.jpg?v=1739809576","width":1400},{"alt":"Form Cure L - Formlabs - Voxel Factory -3D printer- Imprimante 3D","id":29298106695916,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image4.jpg?v=1739809577"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Form-Cure-L-Image4.jpg?v=1739809577","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cstrong\u003eSave time, minimize effort and maximize efficiency with the automated, large format post-processing Form Cure L machine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe \u003ca href=\"https:\/\/formlabs.com\/post-processing\/wash-l-cure-l\/\" target=\"_blank\"\u003eFormlabs Form Cure L\u003c\/a\u003e exposes 3D printed parts to the appropriate levels of light and heat to optimize material properties. It\u003c\/span\u003e uses heat, UV light, and consistent universal exposure to bring parts to their peak mechanical properties and dimensional accuracy.\u003c\/p\u003e\n\u003cp class=\"Header_headerText__qRPu1 Header_as-h4__Km2q1 Header_weight-600__cbwqO undefined\"\u003e\u003cstrong\u003eOptimized for Formlabs Materials\u003c\/strong\u003e - You can use the pre-programmed cure settings or save your own frequently used custom profiles to improve post-processing efficiency.\u003c\/p\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cp class=\"Header_headerText__qRPu1 Header_as-h4__Km2q1 Header_weight-600__cbwqO undefined\"\u003e\u003cstrong\u003eRapid, High-Intensity Curing - \u003c\/strong\u003eTwo 500W heaters bring temperatures up to 80°C in less than 10 minutes while three UV light modules emit the optimal wavelength of light for fast, effective curing. Once the chamber is heated, 3 LED modules trigger the post-curing reaction, bringing parts to their maximum mechanical properties.\u003c\/p\u003e\n\u003cdiv class=\"section-4529912 Grid_section__Nq73A\" id=\"Build volume \u0026amp; Technology\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"section-b7458909-487c-4496-baa7-4f43c6239e19 Grid_section__Nq73A\"\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-margin-x__V_FSm\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-24__MkyB1 Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv class=\"CombinedHeadlines_removeMarginChildren__Ud8g7\"\u003e\n\u003cp class=\"Header_headerText__qRPu1 Header_as-h4__Km2q1 Header_weight-600__cbwqO undefined\"\u003e\u003cstrong\u003eConsistent Universal Exposure - \u003c\/strong\u003eThe Form Cure L has a reflective inner cavity and rotating glass turntable that ensure the UV light to reach all the surfaces of the part for a consistent cure.\u003c\/p\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cp\u003e\u003cem\u003eForm Cure L and Form Wash L have been validated in FDA-cleared workflows and are compatible with biocompatible, sterilizable materials made in the Formlabs ISO 13485 facility.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch4\u003e\u003cspan\u003ePrinter Compatibility\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eForm 3L, Form 3BL, Form 3, Form 3B, Form 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003ch4\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ch4\u003e\u003cspan\u003eDimensions \u0026amp; Weight\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDimensions : 69.0 x 54.0 x 44.5 cm (27.2 x 21.3 x 17.5 in)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeight : \u003c\/span\u003e24kg (\u003cspan\u003e53 lb) \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eTurntable Diameter : \u003c\/span\u003e39.5 cm (\u003cspan\u003e15.6 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMaximum Part Height : \u003c\/span\u003e32 cm (\u003cspan\u003e12.6 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch4\u003e\u003cspan\u003eTemperatures, Lights, Power \u0026amp; Heater\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eOperating Temperature : \u003c\/span\u003eSuggested 18—28 °C \u003cspan\u003e(64—82 °F)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMaximum Cure Chamber : \u003c\/span\u003e80 °C (\u003cspan\u003e176 °F)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeaters : Dual 500W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLight Source : \u003c\/span\u003e45 multi-directional LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLED Power : \u003c\/span\u003e70W\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLED Wavelength : \u003c\/span\u003e375 nm, 405nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower Requirements : \u003c\/span\u003eInput (NA) 100 - 120 VAC, 50-60Hz, 15A - \u003cspan\u003eInput (EU) 220 - 240 VAC, 50-60Hz, 8A\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Formlabs Form Cure L
$6,435.00
Save time, minimize effort and maximize efficiency with the automated, large format post-processing Form Cure L machine. The Formlabs Form Cure L exposes 3D printed parts to the appropriate levels of light and heat to optimize material properties. It uses heat, UV light, and consistent universal exposure to bring parts to their peak mechanical ...
{"id":756386332790,"title":"Ultimaker S5 Dual Extruder 3D Printer","handle":"ultimaker-s5-dual-extruder-3d-printer","description":"\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ca href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" title=\"Send an email to ask for a quote\" target=\"_blank\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBundle pricing available when you buy the S5, Air Manager and Material Station. Email us for a quote with the link above. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm), \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.repetier.com\/\" title=\"Repetier-Host\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" title=\"Link to Download page for Cura Connect by Ultimaker\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2018-04-23T05:36:12-04:00","created_at":"2018-04-17T13:37:32-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["3Dprinters","Ultimaker"],"price":1004692,"price_min":1004692,"price_max":1004692,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8122029408374,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US5-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S5 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":1004692,"weight":29000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874982375","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1739809035","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1739809036","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1739809037","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1739809039"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1739809035","options":["Title"],"media":[{"alt":"Ultimaker S5 Dual Extruder 3D Printer - Voxel Factory -3D printer- Imprimante 3D","id":29047543922924,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1739809035"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1739809035","width":1400},{"alt":"Ultimaker S5 Dual Extruder 3D Printer - Voxel Factory -3D printer- Imprimante 3D","id":29047544217836,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1739809036"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1739809036","width":1400},{"alt":"Ultimaker S5 Dual Extruder 3D Printer - Voxel Factory -3D printer- Imprimante 3D","id":29047544545516,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1739809037"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1739809037","width":1400},{"alt":"Ultimaker S5 Dual Extruder 3D Printer - Voxel Factory -3D printer- Imprimante 3D","id":29047544643820,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1739809039"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1739809039","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ca href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" title=\"Send an email to ask for a quote\" target=\"_blank\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBundle pricing available when you buy the S5, Air Manager and Material Station. Email us for a quote with the link above. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm), \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.repetier.com\/\" title=\"Repetier-Host\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" title=\"Link to Download page for Cura Connect by Ultimaker\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}
Ultimaker S5 Dual Extruder 3D Printer
$10,046.92
Ask For Quote The top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! Active bed leveling ensures a perfect first layer, a closed front controlsairflow, and a filament flow sensor will pause your print and notify you ...
{"id":3956269547638,"title":"Ultimaker S3 Dual Extruder 3D Printer","handle":"ultimaker-s3-dual-extruder-3d-printer","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe newest addition to the S line of Ultimaker 3D printers, the Ultimaker S3 offers all the advantages of the \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 dual extruder 3D printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e in a compact, efficient package. Ready to print carbon or fiber glass composite materials for stronger, tougher parts, and more reliable than ever, the Ultimaker S3 will help streamline your workflow for parts and prototype production.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Ultimaker S3 allows you to print with a wide range of materials, including Nylon, PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want. The printer comes with a spool of Tough PLA and a spool of PVA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKey features :\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNetwork connectivity over Wifi, or LAN, or cloud. USB printing also available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront door for optimal printing environment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdvanced active bed leveling for reliable first-layer adhesion, allows unattended use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNFC material recognition with complete Cura software integration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMaterial flow sensor detects end-of-filament and pauses the printer\u003c\/li\u003e\n\u003cli\u003eComposite material compatible : nylon or carbon fiber reinforced filament ready\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 394 x 489 x 637 mm (15.5 x 19.3 x 25.1 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 14.4 kg (31.7 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 230 x 190 x 200 mm (9 x 7.4 x 7.9 in)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 8740cm³ (526in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : dual reinforced extruders\u003c\/li\u003e\n\u003cli\u003eHotend : dual print cores\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : \u003ca href=\"\/products\/ultimaker-print-core-0-4mm\" title=\"Ultimaker print core 0.4mm\" target=\"_blank\"\u003e0.4mm\u003c\/a\u003e (included), \u003ca href=\"\/products\/ultimaker-print-core-0-25mm\" title=\"Ultimaker Print Core 0.25mm\" target=\"_blank\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-print-core-cc-0-6mm\" title=\"Ultimaker print core CC 0.6mm\" target=\"_blank\"\u003e0.6mm\u003c\/a\u003e or \u003ca href=\"\/products\/ultimaker-print-core-0-8mm\" title=\"Ultimaker print core 0.8mm\" target=\"_blank\"\u003e0.8mm\u003c\/a\u003e (sold separately)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : heated glass plate (20 - 14\u003cspan\u003e0°C\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eBed leveling : advanced active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis motors : step motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" title=\"Ultimaker Cura at ultimaker.com\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Connect\u003c\/li\u003e\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eABS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCPE \/ CPE+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU 95A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3rd party materials.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T13:59:57-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":[],"price":643292,"price_min":643292,"price_max":643292,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505185579126,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US3-STD-285","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S3 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":643292,"weight":16500,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874961026","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1739809139","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-2_1400x_efdd8441-89b3-4a92-a4b3-3343e2f6a1c8.jpg?v=1739809140","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x_aa5f33f6-841b-44f6-851f-a86b36bbeeee.jpg?v=1739809141","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x-2_1400x_f1e16716-8b63-42a8-a8b6-15beaf9f20eb.jpg?v=1739809142"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1739809139","options":["Title"],"media":[{"alt":"Ultimaker S3 Dual Extruder 3D Printer - Voxel Factory -3D printer- Imprimante 3D","id":29047557030124,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1739809139"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1739809139","width":1400},{"alt":"Ultimaker S3 Dual Extruder 3D Printer - Voxel Factory -3D printer- Imprimante 3D","id":29047557259500,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-2_1400x_efdd8441-89b3-4a92-a4b3-3343e2f6a1c8.jpg?v=1739809140"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-2_1400x_efdd8441-89b3-4a92-a4b3-3343e2f6a1c8.jpg?v=1739809140","width":1400},{"alt":"Ultimaker S3 Dual Extruder 3D Printer - Voxel Factory -3D printer- Imprimante 3D","id":29047557587180,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x_aa5f33f6-841b-44f6-851f-a86b36bbeeee.jpg?v=1739809141"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x_aa5f33f6-841b-44f6-851f-a86b36bbeeee.jpg?v=1739809141","width":1400},{"alt":"Ultimaker S3 Dual Extruder 3D Printer - Voxel Factory -3D printer- Imprimante 3D","id":29148121956588,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x-2_1400x_f1e16716-8b63-42a8-a8b6-15beaf9f20eb.jpg?v=1739809142"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x-2_1400x_f1e16716-8b63-42a8-a8b6-15beaf9f20eb.jpg?v=1739809142","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe newest addition to the S line of Ultimaker 3D printers, the Ultimaker S3 offers all the advantages of the \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 dual extruder 3D printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e in a compact, efficient package. Ready to print carbon or fiber glass composite materials for stronger, tougher parts, and more reliable than ever, the Ultimaker S3 will help streamline your workflow for parts and prototype production.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Ultimaker S3 allows you to print with a wide range of materials, including Nylon, PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want. The printer comes with a spool of Tough PLA and a spool of PVA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKey features :\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNetwork connectivity over Wifi, or LAN, or cloud. USB printing also available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront door for optimal printing environment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdvanced active bed leveling for reliable first-layer adhesion, allows unattended use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNFC material recognition with complete Cura software integration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMaterial flow sensor detects end-of-filament and pauses the printer\u003c\/li\u003e\n\u003cli\u003eComposite material compatible : nylon or carbon fiber reinforced filament ready\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 394 x 489 x 637 mm (15.5 x 19.3 x 25.1 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 14.4 kg (31.7 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 230 x 190 x 200 mm (9 x 7.4 x 7.9 in)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 8740cm³ (526in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : dual reinforced extruders\u003c\/li\u003e\n\u003cli\u003eHotend : dual print cores\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : \u003ca href=\"\/products\/ultimaker-print-core-0-4mm\" title=\"Ultimaker print core 0.4mm\" target=\"_blank\"\u003e0.4mm\u003c\/a\u003e (included), \u003ca href=\"\/products\/ultimaker-print-core-0-25mm\" title=\"Ultimaker Print Core 0.25mm\" target=\"_blank\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-print-core-cc-0-6mm\" title=\"Ultimaker print core CC 0.6mm\" target=\"_blank\"\u003e0.6mm\u003c\/a\u003e or \u003ca href=\"\/products\/ultimaker-print-core-0-8mm\" title=\"Ultimaker print core 0.8mm\" target=\"_blank\"\u003e0.8mm\u003c\/a\u003e (sold separately)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : heated glass plate (20 - 14\u003cspan\u003e0°C\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eBed leveling : advanced active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis motors : step motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" title=\"Ultimaker Cura at ultimaker.com\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Connect\u003c\/li\u003e\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eABS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCPE \/ CPE+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU 95A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3rd party materials.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}
Ultimaker S3 Dual Extruder 3D Printer
$6,432.92
The newest addition to the S line of Ultimaker 3D printers, the Ultimaker S3 offers all the advantages of the Ultimaker S5 in a compact, efficient package. Ready to print carbon or fiber glass composite materials for stronger, tougher parts, and more reliable than ever, the Ultimaker S3 will help streamline your workflow for parts and prototype...
Sale
{"id":10392286857,"title":"Formlabs Form Cure for Form 2 \u0026 3","handle":"form-cure-for-form-2","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003ePost-cure process for optimal performance, with controlled temperature and precise, 405nm light. 13 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials while your print rotates inside the machine.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-09-29T13:53:28-04:00","created_at":"2017-09-05T12:10:42-04:00","vendor":"Formlabs","type":"Formlabs 3D Printers","tags":["3Dprinters","form 2","formlabs","resin","sla"],"price":89900,"price_min":89900,"price_max":89900,"available":true,"price_varies":false,"compare_at_price":107250,"compare_at_price_min":107250,"compare_at_price_max":107250,"compare_at_price_varies":false,"variants":[{"id":44821703241,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-CUR-000-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Form Cure for Form 2 \u0026 3","public_title":null,"options":["Default Title"],"price":89900,"weight":7500,"compare_at_price":107250,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"0851976006622","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-1_1400x_3555c36c-e616-493d-b0c7-eb94f0295a37.jpg?v=1739808983","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-2_1400x_4a87ebee-9aeb-4422-b9ed-998fb3d43c7b.jpg?v=1739808984","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-2_1400x-3_1400x_913022ef-baca-43cc-ba4c-3de850c812da.jpg?v=1739808985","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-2_1400x-4_1400x_ae362295-a4b3-4b34-97b9-0c55c89ce4c6.jpg?v=1739808987"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-1_1400x_3555c36c-e616-493d-b0c7-eb94f0295a37.jpg?v=1739808983","options":["Title"],"media":[{"alt":"Formlabs Form Cure for Form 2 \u0026 3 - Voxel Factory -3D printer- Imprimante 3D","id":29083645804780,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-1_1400x_3555c36c-e616-493d-b0c7-eb94f0295a37.jpg?v=1739808983"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-1_1400x_3555c36c-e616-493d-b0c7-eb94f0295a37.jpg?v=1739808983","width":1400},{"alt":"Formlabs Form Cure for Form 2 \u0026 3 - Voxel Factory -3D printer- Imprimante 3D","id":29083646230764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-2_1400x_4a87ebee-9aeb-4422-b9ed-998fb3d43c7b.jpg?v=1739808984"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-2_1400x_4a87ebee-9aeb-4422-b9ed-998fb3d43c7b.jpg?v=1739808984","width":1400},{"alt":"Formlabs Form Cure for Form 2 \u0026 3 - Voxel Factory -3D printer- Imprimante 3D","id":29148663349484,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-2_1400x-3_1400x_913022ef-baca-43cc-ba4c-3de850c812da.jpg?v=1739808985"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-2_1400x-3_1400x_913022ef-baca-43cc-ba4c-3de850c812da.jpg?v=1739808985","width":1400},{"alt":"Formlabs Form Cure for Form 2 \u0026 3 - Voxel Factory -3D printer- Imprimante 3D","id":29148664627436,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-2_1400x-4_1400x_ae362295-a4b3-4b34-97b9-0c55c89ce4c6.jpg?v=1739808987"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/formlabs-3d-printers-formlabs-form-cure-for-form-2-2_1400x-4_1400x_ae362295-a4b3-4b34-97b9-0c55c89ce4c6.jpg?v=1739808987","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003ePost-cure process for optimal performance, with controlled temperature and precise, 405nm light. 13 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials while your print rotates inside the machine.\u003c\/p\u003e\n\u003c\/div\u003e"}
Formlabs Form Cure for Form 2 & 3
$899.00 $1,072.50
Post-cure process for optimal performance, with controlled temperature and precise, 405nm light. 13 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials while your print rotates inside the machine.
{"id":3956271153270,"title":"Material Handling Station for Ultimaker S5","handle":"material-handling-station-for-ultimaker-s5","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eGet more out of your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e with the Material Station. Load up to six spools of filament in a humidity-controlled, fully enclosed compartment. The station integrates with Cura to enable live spool switching for uninterrupted, hassle-free printing.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy loading : front-facing loading for up to six spools of filament\u003c\/li\u003e\n\u003cli\u003eUninterrupted printing : automatic spool switching when a spool runs out\u003c\/li\u003e\n\u003cli\u003eHumidity control : intelligent atmospheric management and self-regenerating desiccant ensures optimal environmental conditions for your filament\u003c\/li\u003e\n\u003cli\u003eEasy setup and monitoring : NFC material recognition for \u003ca href=\"\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, fully integrates with Cura software.\u003c\/li\u003e\n\u003cli\u003eComposite materials compatibility\u003c\/li\u003e\n\u003cli\u003eCompatible with Ultimaker and 3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity : 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type : dual-geared, abrasion resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output : max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration : Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:03:21-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","s5","ultimaker","ultimaker s5"],"price":549183,"price_min":549183,"price_max":549183,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505191444598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-MHS-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Material Handling Station for Ultimaker S5","public_title":null,"options":["Default Title"],"price":549183,"weight":20000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874980999","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1739809143","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1739809144","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1739809145"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1739809143","options":["Title"],"media":[{"alt":"Material Handling Station for Ultimaker S5 - Voxel Factory -3D printer- Imprimante 3D","id":29047547035884,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1739809143"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1739809143","width":1400},{"alt":"Material Handling Station for Ultimaker S5 - Voxel Factory -3D printer- Imprimante 3D","id":29047547265260,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1739809144"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1739809144","width":1400},{"alt":"Material Handling Station for Ultimaker S5 - Voxel Factory -3D printer- Imprimante 3D","id":29047547363564,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1739809145"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1739809145","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eGet more out of your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e with the Material Station. Load up to six spools of filament in a humidity-controlled, fully enclosed compartment. The station integrates with Cura to enable live spool switching for uninterrupted, hassle-free printing.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy loading : front-facing loading for up to six spools of filament\u003c\/li\u003e\n\u003cli\u003eUninterrupted printing : automatic spool switching when a spool runs out\u003c\/li\u003e\n\u003cli\u003eHumidity control : intelligent atmospheric management and self-regenerating desiccant ensures optimal environmental conditions for your filament\u003c\/li\u003e\n\u003cli\u003eEasy setup and monitoring : NFC material recognition for \u003ca href=\"\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, fully integrates with Cura software.\u003c\/li\u003e\n\u003cli\u003eComposite materials compatibility\u003c\/li\u003e\n\u003cli\u003eCompatible with Ultimaker and 3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity : 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type : dual-geared, abrasion resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output : max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration : Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}
Material Handling Station for Ultimaker S5
$5,491.83
Get more out of your Ultimaker S5 with the Material Station. Load up to six spools of filament in a humidity-controlled, fully enclosed compartment. The station integrates with Cura to enable live spool switching for uninterrupted, hassle-free printing. Key features : Easy loading : front-facing loading for up to six spools of filament Uninter...
{"id":3956284031094,"title":"Ultimaker Air Manager for Ultimaker S5","handle":"ultimaker-air-manager-for-ultimaker-s5","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eSitting atop your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp\u003eThrough Cura and the Ultimaker S5, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPA filter\u003c\/li\u003e\n\u003cli\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in) \u003c\/li\u003e\n\u003cli\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 3.6kg\u003c\/li\u003e\n\u003cli\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli\u003eOperating sound : less than 51 dBA (including Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli\u003eCompatible materials : Optimized for \u003ca href=\"\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:45:22-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","enclosure","s5","ultimaker"],"price":159625,"price_min":159625,"price_max":159625,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505260650614,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-AIR-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Air Manager for Ultimaker S5","public_title":null,"options":["Default Title"],"price":159625,"weight":8100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874981002","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1739809147","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2_1400x_1400x_f17b4fa1-bb4a-49bb-a3ee-af92376649ba.jpg?v=1739809147","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3_1400x_1400x_847f8607-3e25-43ce-9ce7-03ade6f0b7ce.jpg?v=1739809149"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1739809147","options":["Title"],"media":[{"alt":"Ultimaker Air Manager for Ultimaker S5 - Voxel Factory -3D printer- Imprimante 3D","id":29047548969196,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1739809147"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1739809147","width":1400},{"alt":"Ultimaker Air Manager for Ultimaker S5 - Voxel Factory -3D printer- Imprimante 3D","id":29047551656172,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2_1400x_1400x_f17b4fa1-bb4a-49bb-a3ee-af92376649ba.jpg?v=1739809147"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2_1400x_1400x_f17b4fa1-bb4a-49bb-a3ee-af92376649ba.jpg?v=1739809147","width":1400},{"alt":"Ultimaker Air Manager for Ultimaker S5 - Voxel Factory -3D printer- Imprimante 3D","id":29047552049388,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3_1400x_1400x_847f8607-3e25-43ce-9ce7-03ade6f0b7ce.jpg?v=1739809149"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3_1400x_1400x_847f8607-3e25-43ce-9ce7-03ade6f0b7ce.jpg?v=1739809149","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eSitting atop your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp\u003eThrough Cura and the Ultimaker S5, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPA filter\u003c\/li\u003e\n\u003cli\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in) \u003c\/li\u003e\n\u003cli\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 3.6kg\u003c\/li\u003e\n\u003cli\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli\u003eOperating sound : less than 51 dBA (including Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli\u003eCompatible materials : Optimized for \u003ca href=\"\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}
Ultimaker Air Manager for Ultimaker S5
$1,596.25
Sitting atop your Ultimaker S5 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment. Through Cura and the Ultimaker S5, the Air Manager smartly adjusts the airflow in...
Sale
{"id":6059531567284,"title":"Ultimaker 2+ Connect Single nozzle 3D printer","handle":"ultimaker-2-connect-3d-printer","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe newest addition to Ultimaker's line of FFF printers, The Ultimaker 2+ Connect. A single nozzle printer with networking capabilities and a new touchscreen, the Ultimaker 2+ Connect is your reliable first step into our world of easy, remote 3D printing. Simply unbox and connect three components, and get started. This speedy setup even makes installing multiple 3D printers effortless.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Ultimaker 2+ Connect allows you to print with a wide range of materials, including, Nylon, PLA, ABS, CPE and TPU. The printer comes with a 750g spool of Ultimaker Silver PLA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Key Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork connectivity: Via Wi-Fi or Ethernet, print\u003cbr\u003eremotely over the cloud with added security\u003c\/li\u003e\n\u003cli\u003eNext-gen components: A stiffer build platform\u003cbr\u003eand rigorously tested material profiles ensure\u003cbr\u003ereliable printing\u003c\/li\u003e\n\u003cli\u003eTouchscreen: For every action, the 2.4” color\u003cbr\u003etouchscreen gives you intuitive control and assistance\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNFC material recognition with complete Cura software integration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eEnhanced safety: The Ultimaker 2+ Connect Air\u003cbr\u003eManager removes up to 95% of ultrafine particles and\u003cbr\u003eshields users from hot components (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBundle pricing available with Air Manager\/Door accessories, email us for a quote. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 460 x 580 mm (13.5 x 18.1 x 22.8 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 10.3 kg (22.7 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eSingle extrusion with swappable nozzles; \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.4 mm (included)\u003cbr data-mce-fragment=\"1\"\u003e0.25, 0.6, 0.8 mm (sold separately)\u003c\/li\u003e\n\u003cli\u003eLayer Resolution: 0.25 mm nozzle: 150 - 60 micron\u003cbr data-mce-fragment=\"1\"\u003e 0.4 mm nozzle: 200 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e 0.6 mm nozzle: 400 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e 0.8 mm nozzle: 600 - 20 micron\u003c\/li\u003e\n\u003cli\u003eBuild Dimensions: 223 x 220 x 205 mm (8.7 x 8.6 x 8 in)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : heated glass plate (20 - 110\u003cspan\u003e°C\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eBed leveling : Manual bed leveling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnclosure: The Ultimaker 2+ Connect Air\u003cbr data-mce-fragment=\"1\"\u003eManager (Sold separately)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis motors : step motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Ultimaker Cura at ultimaker.com\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Connect\u003c\/li\u003e\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eABS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCPE \/ CPE+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU 95A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3rd party materials.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2020-11-10T04:00:01-05:00","created_at":"2020-11-05T17:37:49-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2.85mm","3Dprinters","nozzle","Ultimaker"],"price":349900,"price_min":349900,"price_max":349900,"available":true,"price_varies":false,"compare_at_price":379500,"compare_at_price_min":379500,"compare_at_price_max":379500,"compare_at_price_varies":false,"variants":[{"id":37454769291444,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-2PC-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker 2+ Connect Single nozzle 3D printer","public_title":null,"options":["Default Title"],"price":349900,"weight":10300,"compare_at_price":379500,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8719874982580","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1739809328","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-2_1400x_f7ac0f6a-1eca-4dea-b811-33654af89638.jpg?v=1739809330","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-3_1400x_0d028828-8bcf-4fba-bb04-7c03770e3faa.jpg?v=1739809331","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-4_1400x_a103b472-6c5d-4c6c-8d77-b6c9d2c3fb19.jpg?v=1739809332"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1739809328","options":["Title"],"media":[{"alt":"Ultimaker 2+ Connect Single nozzle 3D printer - Voxel Factory -3D printer- Imprimante 3D","id":29047560601836,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1739809328"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1739809328","width":1400},{"alt":"Ultimaker 2+ Connect Single nozzle 3D printer - Voxel Factory -3D printer- Imprimante 3D","id":29047560896748,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-2_1400x_f7ac0f6a-1eca-4dea-b811-33654af89638.jpg?v=1739809330"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-2_1400x_f7ac0f6a-1eca-4dea-b811-33654af89638.jpg?v=1739809330","width":1400},{"alt":"Ultimaker 2+ Connect Single nozzle 3D printer - Voxel Factory -3D printer- Imprimante 3D","id":29047561486572,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-3_1400x_0d028828-8bcf-4fba-bb04-7c03770e3faa.jpg?v=1739809331"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-3_1400x_0d028828-8bcf-4fba-bb04-7c03770e3faa.jpg?v=1739809331","width":1400},{"alt":"Ultimaker 2+ Connect Single nozzle 3D printer - Voxel Factory -3D printer- Imprimante 3D","id":29047561715948,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-4_1400x_a103b472-6c5d-4c6c-8d77-b6c9d2c3fb19.jpg?v=1739809332"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-4_1400x_a103b472-6c5d-4c6c-8d77-b6c9d2c3fb19.jpg?v=1739809332","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe newest addition to Ultimaker's line of FFF printers, The Ultimaker 2+ Connect. A single nozzle printer with networking capabilities and a new touchscreen, the Ultimaker 2+ Connect is your reliable first step into our world of easy, remote 3D printing. Simply unbox and connect three components, and get started. This speedy setup even makes installing multiple 3D printers effortless.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Ultimaker 2+ Connect allows you to print with a wide range of materials, including, Nylon, PLA, ABS, CPE and TPU. The printer comes with a 750g spool of Ultimaker Silver PLA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Key Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork connectivity: Via Wi-Fi or Ethernet, print\u003cbr\u003eremotely over the cloud with added security\u003c\/li\u003e\n\u003cli\u003eNext-gen components: A stiffer build platform\u003cbr\u003eand rigorously tested material profiles ensure\u003cbr\u003ereliable printing\u003c\/li\u003e\n\u003cli\u003eTouchscreen: For every action, the 2.4” color\u003cbr\u003etouchscreen gives you intuitive control and assistance\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNFC material recognition with complete Cura software integration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eEnhanced safety: The Ultimaker 2+ Connect Air\u003cbr\u003eManager removes up to 95% of ultrafine particles and\u003cbr\u003eshields users from hot components (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBundle pricing available with Air Manager\/Door accessories, email us for a quote. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 460 x 580 mm (13.5 x 18.1 x 22.8 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 10.3 kg (22.7 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eSingle extrusion with swappable nozzles; \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.4 mm (included)\u003cbr data-mce-fragment=\"1\"\u003e0.25, 0.6, 0.8 mm (sold separately)\u003c\/li\u003e\n\u003cli\u003eLayer Resolution: 0.25 mm nozzle: 150 - 60 micron\u003cbr data-mce-fragment=\"1\"\u003e 0.4 mm nozzle: 200 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e 0.6 mm nozzle: 400 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e 0.8 mm nozzle: 600 - 20 micron\u003c\/li\u003e\n\u003cli\u003eBuild Dimensions: 223 x 220 x 205 mm (8.7 x 8.6 x 8 in)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : heated glass plate (20 - 110\u003cspan\u003e°C\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eBed leveling : Manual bed leveling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnclosure: The Ultimaker 2+ Connect Air\u003cbr data-mce-fragment=\"1\"\u003eManager (Sold separately)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis motors : step motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Ultimaker Cura at ultimaker.com\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Connect\u003c\/li\u003e\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eABS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCPE \/ CPE+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU 95A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3rd party materials.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}
Ultimaker 2+ Connect Single nozzle 3D printer
$3,499.00 $3,795.00
The newest addition to Ultimaker's line of FFF printers, The Ultimaker 2+ Connect. A single nozzle printer with networking capabilities and a new touchscreen, the Ultimaker 2+ Connect is your reliable first step into our world of easy, remote 3D printing. Simply unbox and connect three components, and get started. This speedy setup even makes i...
{"id":6060494946484,"title":"Ultimaker Air Manager for Ultimaker 2+ Connect","handle":"ultimaker-air-manager-for-ultimaker-2-connect","description":"\u003cp data-mce-fragment=\"1\"\u003eSitting atop your \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-2-connect-3d-printer?_pos=7\u0026amp;_sid=0c7b9f213\u0026amp;_ss=r\" title=\"Ultimaker S5 3D printer\"\u003eUltimaker 2+ Connect\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThrough Cura and the Ultimaker 2+ Connect, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey features :\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEPA filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhysical dimensions : 328 x 459 x 257 mm (12.9 x 18.1 x 10.1 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions (including 2+ Connect) : 342 x 460 x 636 mm (13.5 x 18.1 x 25 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNet weight : 2.65kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating sound : less than 51 dBA (including Ultimaker 2+ Connect)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible printer : \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker 2+ Connect\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible materials : Optimized for \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-10T04:00:01-05:00","created_at":"2020-11-06T18:48:27-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2+ connect","3Dprinters","add-on","enclosure","Ultimaker"],"price":72280,"price_min":72280,"price_max":72280,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37482026827956,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3PD-AIR-2PC-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Air Manager for Ultimaker 2+ Connect","public_title":null,"options":["Default Title"],"price":72280,"weight":5000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874982696","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1739809333","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1739809334","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1739809335","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1739809337"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1739809333","options":["Title"],"media":[{"alt":"Ultimaker Air Manager for Ultimaker 2+ Connect - Voxel Factory -3D printer- Imprimante 3D","id":29003234672876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1739809333"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1739809333","width":1400},{"alt":"Ultimaker Air Manager for Ultimaker 2+ Connect - Voxel Factory -3D printer- Imprimante 3D","id":29003233722604,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1739809334"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1739809334","width":1400},{"alt":"Ultimaker Air Manager for Ultimaker 2+ Connect - Voxel Factory -3D printer- Imprimante 3D","id":29003235426540,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1739809335"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1739809335","width":1400},{"alt":"Ultimaker Air Manager for Ultimaker 2+ Connect - Voxel Factory -3D printer- Imprimante 3D","id":29003235852524,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1739809337"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1739809337","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eSitting atop your \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-2-connect-3d-printer?_pos=7\u0026amp;_sid=0c7b9f213\u0026amp;_ss=r\" title=\"Ultimaker S5 3D printer\"\u003eUltimaker 2+ Connect\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThrough Cura and the Ultimaker 2+ Connect, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey features :\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEPA filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhysical dimensions : 328 x 459 x 257 mm (12.9 x 18.1 x 10.1 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions (including 2+ Connect) : 342 x 460 x 636 mm (13.5 x 18.1 x 25 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNet weight : 2.65kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating sound : less than 51 dBA (including Ultimaker 2+ Connect)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible printer : \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker 2+ Connect\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible materials : Optimized for \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e"}
Ultimaker Air Manager for Ultimaker 2+ Connect
$722.80
Sitting atop your Ultimaker 2+ Connect 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment. Through Cura and the Ultimaker 2+ Connect, the Air Manager smartly adjusts...
{"id":7867983429868,"title":"Ultimaker S7 Dual Extruder 3D Printer","handle":"ultimaker-s7-dual-extruder-3d-printer-1","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBundle pricing available when you buy the S7 and Material Handling Station. Email us at service@voxelfactory.com for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe latest offering in 3D printing from UltiMaker, featuring dual extruders, swappable extrusion cores, an high resolution integrated camera for print monitoring, Wifi and USB printing, and built in Air Manager and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe integrated Air Manager filters out up to 95% of UFPs while also keeping the build\u003cbr data-mce-fragment=\"1\"\u003echamber temperature carefully regulated. The single door helps with heat loss by reducing the gaps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint head with inductive sensor: A new inductive sensor for bed leveling more\u003cbr data-mce-fragment=\"1\"\u003eaccurately probes the build plate. And automatic tilt compensation removes the need for\u003cbr data-mce-fragment=\"1\"\u003ethumbscrew bed calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdvanced active leveling: Reliable first-layer adhesion enables unattended use without manual leveling. Run-out and fan bracket sensors will pause your print and notify you if you run out of filament or if there is a clog that causes your print head to flood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFlexible build plate: The PEI-coated build plate makes for reliable print adhesion and removal. A sensor also assures your build plate will always be in place before printing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1080p camera: Checking on your print remotely via UltiMaker Digital Factory never\u003cbr data-mce-fragment=\"1\"\u003elooked better. The new 1080p camera in the UltiMaker S7 is mounted higher to give a\u003cbr data-mce-fragment=\"1\"\u003ebetter view of the first layers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWi-Fi 2.4 and 5 GHz: The UltiMaker S7 adds 5 GHz Wi-Fi compatibility, which cuts through\u003cbr data-mce-fragment=\"1\"\u003einterference to improve network stability, resulting in a more reliable wireless signal.\u003cbr data-mce-fragment=\"1\"\u003eThis is especially useful for companies that only allow connections via the 5 GHz band.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Ultimaker S7 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint file compatibility: The UltiMaker S7 was created with compatibility in mind. This\u003cbr data-mce-fragment=\"1\"\u003emeans that, if you own an UltiMaker S5, your entire digital library of S5 print files will\u003cbr data-mce-fragment=\"1\"\u003ework flawlessly on the S7 – with no re-slicing needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere. Access to security-assessed software – with remote printing, user management, and e-learning.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3 hours of free training at Voxel Factory\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExternal dimensions: 495 x 585 x 780 mm (19.5 x 23 x 30.7 in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 29.1 kg (64.2 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrinting\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan data-mce-fragment=\"1\"\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHotend : Swappable Print Cores\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm), \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeatbed : PEI coated flexible build plate (20 - 140 °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed-leveling : Inductive sensor-enabled bed leveling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnclosure : Single front door\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wi-Fi (2.4GHz + 5GHz),\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLive high resolution camera (view from desktop or app)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSoftware\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSlicing\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eControl\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSupported OS\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFile types\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePresliced files for S5 do not need reslicing \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eMaterials\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr data-mce-fragment=\"1\"\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2023-01-24T11:08:34-05:00","created_at":"2023-01-24T10:35:11-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2.85mm","Dual Extruder","Ultimaker 3D Printer","Ultimaker S7"],"price":1199703,"price_min":1199703,"price_max":1199703,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43629603717356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US7-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker S7 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":1199703,"weight":35000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1739810080"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1739810080","options":["Title"],"media":[{"alt":"Ultimaker S7 Dual Extruder 3D Printer - Voxel Factory -3D printer- Imprimante 3D","id":31234003239148,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1739810080"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1739810080","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBundle pricing available when you buy the S7 and Material Handling Station. Email us at service@voxelfactory.com for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe latest offering in 3D printing from UltiMaker, featuring dual extruders, swappable extrusion cores, an high resolution integrated camera for print monitoring, Wifi and USB printing, and built in Air Manager and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe integrated Air Manager filters out up to 95% of UFPs while also keeping the build\u003cbr data-mce-fragment=\"1\"\u003echamber temperature carefully regulated. The single door helps with heat loss by reducing the gaps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint head with inductive sensor: A new inductive sensor for bed leveling more\u003cbr data-mce-fragment=\"1\"\u003eaccurately probes the build plate. And automatic tilt compensation removes the need for\u003cbr data-mce-fragment=\"1\"\u003ethumbscrew bed calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdvanced active leveling: Reliable first-layer adhesion enables unattended use without manual leveling. Run-out and fan bracket sensors will pause your print and notify you if you run out of filament or if there is a clog that causes your print head to flood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFlexible build plate: The PEI-coated build plate makes for reliable print adhesion and removal. A sensor also assures your build plate will always be in place before printing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1080p camera: Checking on your print remotely via UltiMaker Digital Factory never\u003cbr data-mce-fragment=\"1\"\u003elooked better. The new 1080p camera in the UltiMaker S7 is mounted higher to give a\u003cbr data-mce-fragment=\"1\"\u003ebetter view of the first layers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWi-Fi 2.4 and 5 GHz: The UltiMaker S7 adds 5 GHz Wi-Fi compatibility, which cuts through\u003cbr data-mce-fragment=\"1\"\u003einterference to improve network stability, resulting in a more reliable wireless signal.\u003cbr data-mce-fragment=\"1\"\u003eThis is especially useful for companies that only allow connections via the 5 GHz band.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Ultimaker S7 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint file compatibility: The UltiMaker S7 was created with compatibility in mind. This\u003cbr data-mce-fragment=\"1\"\u003emeans that, if you own an UltiMaker S5, your entire digital library of S5 print files will\u003cbr data-mce-fragment=\"1\"\u003ework flawlessly on the S7 – with no re-slicing needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere. Access to security-assessed software – with remote printing, user management, and e-learning.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3 hours of free training at Voxel Factory\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExternal dimensions: 495 x 585 x 780 mm (19.5 x 23 x 30.7 in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 29.1 kg (64.2 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrinting\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan data-mce-fragment=\"1\"\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHotend : Swappable Print Cores\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm), \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeatbed : PEI coated flexible build plate (20 - 140 °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed-leveling : Inductive sensor-enabled bed leveling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnclosure : Single front door\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wi-Fi (2.4GHz + 5GHz),\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLive high resolution camera (view from desktop or app)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSoftware\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSlicing\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eControl\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSupported OS\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFile types\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePresliced files for S5 do not need reslicing \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eMaterials\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr data-mce-fragment=\"1\"\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}
Ultimaker S7 Dual Extruder 3D Printer
$11,997.03
Bundle pricing available when you buy the S7 and Material Handling Station. Email us at service@voxelfactory.com for a quote. The latest offering in 3D printing from UltiMaker, featuring dual extruders, swappable extrusion cores, an high resolution integrated camera for print monitoring, Wifi and USB printing, and built in Air Manager and much ...
{"id":8717992919276,"title":"Formlabs Form Wash L 2nd Gen","handle":"form-wash-l-second-gen","description":"\u003cp\u003e\u003cstrong\u003e** Basic Warranty of 1 Year\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eAll SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOnce washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints. The embedded solvent monitor helps you maintain peak cleaning performance by notifying you when it’s time to replace your solvent.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUse Form Wash L with all of your Formlabs SLA 3D printers. Wash one Form 3L build platform or two Form 3 build platforms with the included build platform adapter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eAdaptable to Build Platforms\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSeamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrinter Generation\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eApplicable Build Platforms\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e# Build Platforms That Can Fit on Form Wash L (2nd Generation)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 2\u003cbr\u003eForm 3\/B\/+\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStandard Build Platform\u003cbr\u003eBuild Platform 2 Stainless Steel Build Platform\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 3L\/BL\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 3L Build Platform\u003cbr\u003eForm 3L Build Platform 2L\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4\/B\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4 Build Platform\u003cbr\u003eForm 4 Build Platform Flex\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4L\/BL\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4L Build Platform\u003cbr\u003eForm 4L Build Platform Flex\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003e\n\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eAutomate Cleaning With Form Wash L\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eStreamline your 3D printing process to help you produce high-quality large-scale parts with less time and effort.\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSet It And Forget It\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUse the pre-programmed wash settings or save your own frequently used custom profiles to improve post-processing efficiency.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCompatible With All Formlabs Materials\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSelect your material from a list and let Form Wash L auto-clean your parts for the appropriate time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eImproved Agitation\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eClean your parts thoroughly with 1.5x more agitation than the previous generation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eInformed Maintenance\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe embedded solvent monitor and cycle counter help you maintain peak cleaning performance by notifying you when it’s time to replace the solvent.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAdaptable to Build Platforms\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSeamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eWhat’s Included\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eForm Wash L (2nd Generation)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eUniversal Adaptor for Form 3(L) Form 4(L)\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-11-18T11:00:32-05:00","created_at":"2024-11-18T10:26:33-05:00","vendor":"Formlabs","type":"Formlabs 3D Printers","tags":["form 2","form 3","Form 3B","Form 3BL","form 3L","Form 4","Form 4B","Form 4BL","Form 4L","formlabs","sla","Wash L"],"price":643500,"price_min":643500,"price_max":643500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45912389845228,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-WSH-3L0-000-002","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Formlabs Form Wash L 2nd Gen","public_title":null,"options":["Default Title"],"price":643500,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294036855","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_White_Printed_Part.webp?v=1739810402","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_Universal_Adapter_Picture.webp?v=1739810403","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Dental_Printed_Part.webp?v=1739810404","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Grey_Printed_Part.webp?v=1739810406"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_White_Printed_Part.webp?v=1739810402","options":["Title"],"media":[{"alt":"Formlabs Form Wash L 2nd Gen - Voxel Factory -3D printer- Imprimante 3D","id":34522785972460,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_White_Printed_Part.webp?v=1739810402"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_White_Printed_Part.webp?v=1739810402","width":1400},{"alt":"Formlabs Form Wash L 2nd Gen - Voxel Factory -3D printer- Imprimante 3D","id":34522814972140,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_Universal_Adapter_Picture.webp?v=1739810403"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_Universal_Adapter_Picture.webp?v=1739810403","width":1400},{"alt":"Formlabs Form Wash L 2nd Gen - Voxel Factory -3D printer- Imprimante 3D","id":34522815135980,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Dental_Printed_Part.webp?v=1739810404"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Dental_Printed_Part.webp?v=1739810404","width":1400},{"alt":"Formlabs Form Wash L 2nd Gen - Voxel Factory -3D printer- Imprimante 3D","id":34522815004908,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Grey_Printed_Part.webp?v=1739810406"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Grey_Printed_Part.webp?v=1739810406","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e** Basic Warranty of 1 Year\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eAll SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOnce washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints. The embedded solvent monitor helps you maintain peak cleaning performance by notifying you when it’s time to replace your solvent.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUse Form Wash L with all of your Formlabs SLA 3D printers. Wash one Form 3L build platform or two Form 3 build platforms with the included build platform adapter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eAdaptable to Build Platforms\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSeamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrinter Generation\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eApplicable Build Platforms\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e# Build Platforms That Can Fit on Form Wash L (2nd Generation)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 2\u003cbr\u003eForm 3\/B\/+\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStandard Build Platform\u003cbr\u003eBuild Platform 2 Stainless Steel Build Platform\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 3L\/BL\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 3L Build Platform\u003cbr\u003eForm 3L Build Platform 2L\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4\/B\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4 Build Platform\u003cbr\u003eForm 4 Build Platform Flex\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4L\/BL\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eForm 4L Build Platform\u003cbr\u003eForm 4L Build Platform Flex\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003e\n\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eAutomate Cleaning With Form Wash L\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eStreamline your 3D printing process to help you produce high-quality large-scale parts with less time and effort.\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSet It And Forget It\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUse the pre-programmed wash settings or save your own frequently used custom profiles to improve post-processing efficiency.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCompatible With All Formlabs Materials\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSelect your material from a list and let Form Wash L auto-clean your parts for the appropriate time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eImproved Agitation\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eClean your parts thoroughly with 1.5x more agitation than the previous generation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eInformed Maintenance\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe embedded solvent monitor and cycle counter help you maintain peak cleaning performance by notifying you when it’s time to replace the solvent.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAdaptable to Build Platforms\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSeamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eWhat’s Included\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eForm Wash L (2nd Generation)\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eUniversal Adaptor for Form 3(L) Form 4(L)\u003c\/li\u003e\n\u003c\/ul\u003e"}
Formlabs Form Wash L 2nd Gen
$6,435.00
** Basic Warranty of 1 Year All SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time. Once washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints. The embedded solvent monitor helps you ma...
{"id":8891448623340,"title":"Formlabs Form Cure 2nd gen","handle":"formlabs-form-cure-2nd-generation","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eForm Cure (2nd Generation) precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4\/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.\u003c\/p\u003e\n\u003cp\u003ePost-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface.\u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.\u003c\/p\u003e\n\u003cp\u003eCure Most Parts in 60 Seconds\u003cbr\u003eRapid UV curing and instant heat up for consistent, validated results and effortless post-curing of large Form 4 prints.\u003c\/p\u003e\n\u003cp\u003eBlazing Fast Curing, Nearly Instant Heat Up Time\u003cbr\u003ePost-cure general purpose resins in just 60 seconds or cure engineering resins in less than 15 minutes with just 60 seconds required to heat to 60 °C (230 V version).\u003c\/p\u003e\n\u003cp\u003eConsistent, Validated Results\u003cbr\u003e48 LED array and convective heating system ensure uniform UV and heat exposure, delivering 14.5 mW\/cm² irradiance and a maximum temperature of 100 °C.\u003c\/p\u003e\n\u003cp\u003ePost-Cure Large Form 4 Prints\u003cbr\u003eDesigned to fit any part on the Form 4, enabling curing of parts up to 200 x 125 x 245 mm on a 235 mm turntable.\u003c\/p\u003e\n\u003cp\u003eEasier than Ever\u003cbr\u003eSleek new design with pre-programmed cure cycles, an easily cleaned glass turntable, and side-hinged door to allow easy access within a compact footprint.\u003c\/p\u003e\n\u003cp\u003eBlazing Fast Curing\u003cbr\u003eForm Cure (2nd Generation) is engineered to deliver rapid, consistent, and high-quality post-curing results.\u003c\/p\u003e\n\u003cp\u003eNear instant heat-up:\u003c\/p\u003e\n\u003cp\u003e60 °C in 60 seconds\u003cbr\u003e80 °C in 150 seconds\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFast curing:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Purpose Resins in 60 seconds\u003cbr\u003eEngineering \u0026amp; Biocompatible Resins in 3-15 minutes\u003c\/p\u003e\n\u003cp\u003ePrecise and Consistent Results\u003cbr\u003eReach temperatures up to: 100 °C\u003cbr\u003eUniform irradiance of 14.5 mW\/cm2\u003c\/p\u003e\n\u003cp\u003eFit Large Form 4 Parts\u003cbr\u003e235 mm rotating turntable\u003cbr\u003e245 mm maximum part height\u003c\/p\u003e\n\u003cp\u003eForm 4 Workflow in Minutes\u003cbr\u003eForm Cure is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4, from the software and materials to printing and post-processing.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2025-04-29T15:40:13-04:00","created_at":"2025-04-29T15:09:25-04:00","vendor":"Formlabs","type":"Formlabs 3D Printers","tags":["cure","Form 4","formlabs","resin","sla"],"price":142857,"price_min":142857,"price_max":142857,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46406567723244,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-CUR-002-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Form Cure 2nd gen","public_title":null,"options":["Default Title"],"price":142857,"weight":16000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Main_Product_Picture.webp?v=1745954986","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Second_Product_Picture.webp?v=1745954986","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Open_Door_Product_Picture.webp?v=1745954990","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_With_Decor_Product_Picture.webp?v=1745954990"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Main_Product_Picture.webp?v=1745954986","options":["Title"],"media":[{"alt":null,"id":35305735979244,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Main_Product_Picture.webp?v=1745954986"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Main_Product_Picture.webp?v=1745954986","width":1400},{"alt":null,"id":35305736012012,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Second_Product_Picture.webp?v=1745954986"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Second_Product_Picture.webp?v=1745954986","width":1400},{"alt":null,"id":35305736077548,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Open_Door_Product_Picture.webp?v=1745954990"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Open_Door_Product_Picture.webp?v=1745954990","width":1400},{"alt":null,"id":35305736044780,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_With_Decor_Product_Picture.webp?v=1745954990"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_With_Decor_Product_Picture.webp?v=1745954990","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eForm Cure (2nd Generation) precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4\/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.\u003c\/p\u003e\n\u003cp\u003ePost-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface.\u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.\u003c\/p\u003e\n\u003cp\u003eCure Most Parts in 60 Seconds\u003cbr\u003eRapid UV curing and instant heat up for consistent, validated results and effortless post-curing of large Form 4 prints.\u003c\/p\u003e\n\u003cp\u003eBlazing Fast Curing, Nearly Instant Heat Up Time\u003cbr\u003ePost-cure general purpose resins in just 60 seconds or cure engineering resins in less than 15 minutes with just 60 seconds required to heat to 60 °C (230 V version).\u003c\/p\u003e\n\u003cp\u003eConsistent, Validated Results\u003cbr\u003e48 LED array and convective heating system ensure uniform UV and heat exposure, delivering 14.5 mW\/cm² irradiance and a maximum temperature of 100 °C.\u003c\/p\u003e\n\u003cp\u003ePost-Cure Large Form 4 Prints\u003cbr\u003eDesigned to fit any part on the Form 4, enabling curing of parts up to 200 x 125 x 245 mm on a 235 mm turntable.\u003c\/p\u003e\n\u003cp\u003eEasier than Ever\u003cbr\u003eSleek new design with pre-programmed cure cycles, an easily cleaned glass turntable, and side-hinged door to allow easy access within a compact footprint.\u003c\/p\u003e\n\u003cp\u003eBlazing Fast Curing\u003cbr\u003eForm Cure (2nd Generation) is engineered to deliver rapid, consistent, and high-quality post-curing results.\u003c\/p\u003e\n\u003cp\u003eNear instant heat-up:\u003c\/p\u003e\n\u003cp\u003e60 °C in 60 seconds\u003cbr\u003e80 °C in 150 seconds\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFast curing:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Purpose Resins in 60 seconds\u003cbr\u003eEngineering \u0026amp; Biocompatible Resins in 3-15 minutes\u003c\/p\u003e\n\u003cp\u003ePrecise and Consistent Results\u003cbr\u003eReach temperatures up to: 100 °C\u003cbr\u003eUniform irradiance of 14.5 mW\/cm2\u003c\/p\u003e\n\u003cp\u003eFit Large Form 4 Parts\u003cbr\u003e235 mm rotating turntable\u003cbr\u003e245 mm maximum part height\u003c\/p\u003e\n\u003cp\u003eForm 4 Workflow in Minutes\u003cbr\u003eForm Cure is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4, from the software and materials to printing and post-processing.\u003c\/p\u003e\n\u003c\/div\u003e"}
Formlabs Form Cure 2nd gen
$1,428.57
Form Cure (2nd Generation) precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45...
{"id":8899722215660,"title":"Ultimaker S8 Dual Extruder 3D Printer","handle":"ultimaker-s8-dual-extruder-3d-printer","description":"\u003ch3\u003eThe fastest desktop dual-material professional 3D printer. \u003c\/h3\u003e\n\u003cp\u003eUp to 4x productivity and improved quality, powered by the new UltiMaker Cheetah motion planner.\u003c\/p\u003e\n\u003ch3\u003eThe fastest desktop dual material professional 3D printer made in Europe.\u003c\/h3\u003e\n\u003cp\u003eThe dual extrusion design works together with software and firmware features to allow you to combine any 2 materials no matter how different they are, with minimal material waste and high reliability.\u003c\/p\u003e\n\u003ch3 id=\"AXTICU5\"\u003eDigital Factory – the only 3D printing software you will ever need\u003c\/h3\u003e\n\u003cp\u003eDigital Factory is designed to streamline every step of your 3D printing workflow, from slicing, to file management and even maintenance. Scalable for any team or enterprise, Digital Factory makes managing your 3D printing projects easier, faster, and more collaborative.\u003c\/p\u003e\n\u003ch3\u003eAdvanced hardware and software security features built-in for professional use.\u003c\/h3\u003e\n\u003cp\u003eDesigned and built in Europe, the UltiMaker S8 is equipped with comprehensive security features, offering peace of mind for professionals in engineering and manufacturing. From secure hardware to advanced firmware, every aspect is designed to protect your intellectual property and ensure safe operation.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdated feeder system:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNew hardened feeder module design inherited from Factor 4 for improved grip and better material control at high speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual high flow print cores:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe dual extrusion design works together with software and firmware features to allow you to combine any 2 materials no matter how different they are, which low material waste and high reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated EPA filter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIndependently tested to remove up to 95% of ultrafine particles to increase air quality peace of mind. The fully enclosed build chamber also boosts print quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh flow print cores:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe new AA+ and CC+ print cores, exclusive the the UltiMaker S8 have a new quad-chamber design that allows for 2.5x more flow and also help with regulating the pressure in the print head for cleaner prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible build plate:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSkip using glue and remove parts effortlessly with the PEI-coated flexible build plate. Its patent-pending design uses 25 magnets and 4 pins for perfect alignment – reducing the time spent using the S8 and increasing productivity.\u003c\/li\u003e\n\u003cli id=\"ONLDBD4\"\u003e\n\u003cstrong\u003eCura integration:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAccess the UltiMaker Cura features that speed up your workflow and increase print success – like intent profiles, easy remote printing, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cdiv class=\"pagebuilder-column\" data-content-type=\"column\" data-appearance=\"full-height\" data-background-images=\"{}\" data-element=\"main\" data-pb-style=\"A4SP7FU\"\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembled dimensions\u003c\/td\u003e\n\u003ctd\u003eW 495 x D 585 x H 800 mm (W 19.5 x D 23 x H 31.5 inches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFused Deposition Modeling (FDM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible filament diameter\u003c\/td\u003e\n\u003ctd\u003e2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e29.1 kg (64.2 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum power output\u003c\/td\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Accuracy\u003c\/td\u003e\n\u003ctd\u003e± 0.15 mm ± 0.15% feature nominal length*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtrusion flow\u003c\/td\u003e\n\u003ctd\u003eUp to 35 mm3\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY speed, acceleration, jerk\u003c\/td\u003e\n\u003ctd\u003eUp to 500 mm\/s, up to 50.000 mm\/s2, up to 100.000.000 mm\/s3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003ePrinter Properties\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer resolution\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.25 mm nozzle: 150 - 60 micron\u003c\/p\u003e\n\u003cp\u003e0.4 mm nozzle: 200 - 20 micron \u003c\/p\u003e\n\u003cp\u003e0.6 mm nozzle: 300 - 20 micron\u003c\/p\u003e\n\u003cp\u003e0.8 mm nozzle: 600 - 20 micron\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXYZ resolution\u003c\/td\u003e\n\u003ctd\u003e6.9, 6.9, 2.5 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeeder type\u003c\/td\u003e\n\u003ctd\u003eDual-geared feeder, reinforced for composite materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e4.7-inch (11.9 cm) color touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint core replacement\u003c\/td\u003e\n\u003ctd\u003eSwappable print cores\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint head\u003c\/td\u003e\n\u003ctd\u003eDual extrusion print head with an auto-nozzle lifting system, swappable print cores, and flood detection.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle diameters\u003c\/td\u003e\n\u003ctd\u003e0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pagebuilder-column\" data-content-type=\"column\" data-appearance=\"full-height\" data-background-images=\"{}\" data-element=\"main\" data-pb-style=\"QGB6Q73\"\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3 id=\"ROST2C2\"\u003eOperation parameters\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilter technology\u003c\/td\u003e\n\u003ctd\u003eReplaceable EPA filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir extraction rate\u003c\/td\u003e\n\u003ctd\u003e1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003eUp to 340 °C (644 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle heat-up time\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 2 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating sound\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 50 dBA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild plate leveling\u003c\/td\u003e\n\u003ctd\u003eAdvanced active leveling with more accurate inductive sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild plate\u003c\/td\u003e\n\u003ctd\u003ePEI-coated flexible steel build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild plate heat-up time\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 5 minutes (from 20 to 60 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating ambient temperature\u003c\/td\u003e\n\u003ctd\u003e15 - 32 °C (59 - 90 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNon-operating temperature\u003c\/td\u003e\n\u003ctd\u003e0 - 32 °C (32 - 90 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 id=\"DX9S8WH\"\u003eEcosystem, Safety \u0026amp; Compliance\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied free software\u003c\/td\u003e\n\u003ctd\u003eUltiMaker Cura – print preparation software UltiMaker Digital Factory – printer management software UltiMaker Essentials – enterprise-grade online software tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported OS\u003c\/td\u003e\n\u003ctd\u003eMacOS, Windows, and Linux\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlugin integration\u003c\/td\u003e\n\u003ctd\u003eSolidWorks, Siemens NX, Autodesk Inventor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported file types\u003c\/td\u003e\n\u003ctd\u003eUltiMaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, GCODE.gz, UFP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFile transfter\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (2.4 and 5 GHz), Ethernet, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eCE, FCC, VPAT, RoHS, REACH, CB, BIS, KC, PSE, RCM, SRRC, MIC, NCC, Safe unattended professional use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore information\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003ca href=\"https:\/\/support.makerbot.com\/s\/article\/1667337922159\" tabindex=\"0\"\u003eLearn more about UltiMaker S8 safety and compliance.\u003c\/a\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-13T13:16:39-04:00","created_at":"2025-05-13T13:10:07-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2.85mm","Dual Extruder","Ultimaker 3D Printer","Ultimaker S8"],"price":1300895,"price_min":1300895,"price_max":1300895,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46437502714092,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US8-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker S8 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":1300895,"weight":35000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"810036967310","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_S8_3D_Printer_Product_Picture.webp?v=1747156456"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_S8_3D_Printer_Product_Picture.webp?v=1747156456","options":["Title"],"media":[{"alt":null,"id":35352168366316,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_S8_3D_Printer_Product_Picture.webp?v=1747156456"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_S8_3D_Printer_Product_Picture.webp?v=1747156456","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eThe fastest desktop dual-material professional 3D printer. \u003c\/h3\u003e\n\u003cp\u003eUp to 4x productivity and improved quality, powered by the new UltiMaker Cheetah motion planner.\u003c\/p\u003e\n\u003ch3\u003eThe fastest desktop dual material professional 3D printer made in Europe.\u003c\/h3\u003e\n\u003cp\u003eThe dual extrusion design works together with software and firmware features to allow you to combine any 2 materials no matter how different they are, with minimal material waste and high reliability.\u003c\/p\u003e\n\u003ch3 id=\"AXTICU5\"\u003eDigital Factory – the only 3D printing software you will ever need\u003c\/h3\u003e\n\u003cp\u003eDigital Factory is designed to streamline every step of your 3D printing workflow, from slicing, to file management and even maintenance. Scalable for any team or enterprise, Digital Factory makes managing your 3D printing projects easier, faster, and more collaborative.\u003c\/p\u003e\n\u003ch3\u003eAdvanced hardware and software security features built-in for professional use.\u003c\/h3\u003e\n\u003cp\u003eDesigned and built in Europe, the UltiMaker S8 is equipped with comprehensive security features, offering peace of mind for professionals in engineering and manufacturing. From secure hardware to advanced firmware, every aspect is designed to protect your intellectual property and ensure safe operation.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdated feeder system:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNew hardened feeder module design inherited from Factor 4 for improved grip and better material control at high speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual high flow print cores:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe dual extrusion design works together with software and firmware features to allow you to combine any 2 materials no matter how different they are, which low material waste and high reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated EPA filter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIndependently tested to remove up to 95% of ultrafine particles to increase air quality peace of mind. The fully enclosed build chamber also boosts print quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh flow print cores:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe new AA+ and CC+ print cores, exclusive the the UltiMaker S8 have a new quad-chamber design that allows for 2.5x more flow and also help with regulating the pressure in the print head for cleaner prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible build plate:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSkip using glue and remove parts effortlessly with the PEI-coated flexible build plate. Its patent-pending design uses 25 magnets and 4 pins for perfect alignment – reducing the time spent using the S8 and increasing productivity.\u003c\/li\u003e\n\u003cli id=\"ONLDBD4\"\u003e\n\u003cstrong\u003eCura integration:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAccess the UltiMaker Cura features that speed up your workflow and increase print success – like intent profiles, easy remote printing, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cdiv class=\"pagebuilder-column\" data-content-type=\"column\" data-appearance=\"full-height\" data-background-images=\"{}\" data-element=\"main\" data-pb-style=\"A4SP7FU\"\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembled dimensions\u003c\/td\u003e\n\u003ctd\u003eW 495 x D 585 x H 800 mm (W 19.5 x D 23 x H 31.5 inches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFused Deposition Modeling (FDM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible filament diameter\u003c\/td\u003e\n\u003ctd\u003e2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e29.1 kg (64.2 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum power output\u003c\/td\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Accuracy\u003c\/td\u003e\n\u003ctd\u003e± 0.15 mm ± 0.15% feature nominal length*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtrusion flow\u003c\/td\u003e\n\u003ctd\u003eUp to 35 mm3\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY speed, acceleration, jerk\u003c\/td\u003e\n\u003ctd\u003eUp to 500 mm\/s, up to 50.000 mm\/s2, up to 100.000.000 mm\/s3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003ePrinter Properties\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer resolution\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.25 mm nozzle: 150 - 60 micron\u003c\/p\u003e\n\u003cp\u003e0.4 mm nozzle: 200 - 20 micron \u003c\/p\u003e\n\u003cp\u003e0.6 mm nozzle: 300 - 20 micron\u003c\/p\u003e\n\u003cp\u003e0.8 mm nozzle: 600 - 20 micron\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXYZ resolution\u003c\/td\u003e\n\u003ctd\u003e6.9, 6.9, 2.5 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeeder type\u003c\/td\u003e\n\u003ctd\u003eDual-geared feeder, reinforced for composite materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e4.7-inch (11.9 cm) color touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint core replacement\u003c\/td\u003e\n\u003ctd\u003eSwappable print cores\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint head\u003c\/td\u003e\n\u003ctd\u003eDual extrusion print head with an auto-nozzle lifting system, swappable print cores, and flood detection.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle diameters\u003c\/td\u003e\n\u003ctd\u003e0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pagebuilder-column\" data-content-type=\"column\" data-appearance=\"full-height\" data-background-images=\"{}\" data-element=\"main\" data-pb-style=\"QGB6Q73\"\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3 id=\"ROST2C2\"\u003eOperation parameters\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilter technology\u003c\/td\u003e\n\u003ctd\u003eReplaceable EPA filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir extraction rate\u003c\/td\u003e\n\u003ctd\u003e1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003eUp to 340 °C (644 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle heat-up time\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 2 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating sound\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 50 dBA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild plate leveling\u003c\/td\u003e\n\u003ctd\u003eAdvanced active leveling with more accurate inductive sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild plate\u003c\/td\u003e\n\u003ctd\u003ePEI-coated flexible steel build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild plate heat-up time\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 5 minutes (from 20 to 60 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating ambient temperature\u003c\/td\u003e\n\u003ctd\u003e15 - 32 °C (59 - 90 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNon-operating temperature\u003c\/td\u003e\n\u003ctd\u003e0 - 32 °C (32 - 90 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 id=\"DX9S8WH\"\u003eEcosystem, Safety \u0026amp; Compliance\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied free software\u003c\/td\u003e\n\u003ctd\u003eUltiMaker Cura – print preparation software UltiMaker Digital Factory – printer management software UltiMaker Essentials – enterprise-grade online software tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported OS\u003c\/td\u003e\n\u003ctd\u003eMacOS, Windows, and Linux\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlugin integration\u003c\/td\u003e\n\u003ctd\u003eSolidWorks, Siemens NX, Autodesk Inventor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported file types\u003c\/td\u003e\n\u003ctd\u003eUltiMaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, GCODE.gz, UFP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFile transfter\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (2.4 and 5 GHz), Ethernet, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eCE, FCC, VPAT, RoHS, REACH, CB, BIS, KC, PSE, RCM, SRRC, MIC, NCC, Safe unattended professional use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore information\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003ca href=\"https:\/\/support.makerbot.com\/s\/article\/1667337922159\" tabindex=\"0\"\u003eLearn more about UltiMaker S8 safety and compliance.\u003c\/a\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Ultimaker S8 Dual Extruder 3D Printer
$13,008.95
The fastest desktop dual-material professional 3D printer. Up to 4x productivity and improved quality, powered by the new UltiMaker Cheetah motion planner. The fastest desktop dual material professional 3D printer made in Europe. The dual extrusion design works together with software and firmware features to allow you to combine any 2 materials...
