Ultimaker Factor 4 Dual Extruder 3D printer

{"id":7867983429868,"title":"Ultimaker S7 Dual Extruder 3D Printer","handle":"ultimaker-s7-dual-extruder-3d-printer-1","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBundle pricing available when you buy the S7 and Material Handling Station. Email us at service@voxelfactory.com for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe latest offering in 3D printing from UltiMaker, featuring dual extruders, swappable extrusion cores, an high resolution integrated camera for print monitoring, Wifi and USB printing, and built in Air Manager and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe integrated Air Manager filters out up to 95% of UFPs while also keeping the build\u003cbr data-mce-fragment=\"1\"\u003echamber temperature carefully regulated. The single door helps with heat loss by reducing the gaps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint head with inductive sensor: A new inductive sensor for bed leveling more\u003cbr data-mce-fragment=\"1\"\u003eaccurately probes the build plate. And automatic tilt compensation removes the need for\u003cbr data-mce-fragment=\"1\"\u003ethumbscrew bed calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdvanced active leveling: Reliable first-layer adhesion enables unattended use without manual leveling. Run-out and fan bracket sensors will pause your print and notify you if you run out of filament or if there is a clog that causes your print head to flood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFlexible build plate: The PEI-coated build plate makes for reliable print adhesion and removal. A sensor also assures your build plate will always be in place before printing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1080p camera: Checking on your print remotely via UltiMaker Digital Factory never\u003cbr data-mce-fragment=\"1\"\u003elooked better. The new 1080p camera in the UltiMaker S7 is mounted higher to give a\u003cbr data-mce-fragment=\"1\"\u003ebetter view of the first layers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWi-Fi 2.4 and 5 GHz: The UltiMaker S7 adds 5 GHz Wi-Fi compatibility, which cuts through\u003cbr data-mce-fragment=\"1\"\u003einterference to improve network stability, resulting in a more reliable wireless signal.\u003cbr data-mce-fragment=\"1\"\u003eThis is especially useful for companies that only allow connections via the 5 GHz band.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Ultimaker S7 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint file compatibility: The UltiMaker S7 was created with compatibility in mind. This\u003cbr data-mce-fragment=\"1\"\u003emeans that, if you own an UltiMaker S5, your entire digital library of S5 print files will\u003cbr data-mce-fragment=\"1\"\u003ework flawlessly on the S7 – with no re-slicing needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere. Access to security-assessed software – with remote printing, user management, and e-learning.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3 hours of free training at Voxel Factory\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExternal dimensions: 495 x 585 x 780 mm (19.5 x 23 x 30.7 in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 29.1 kg (64.2 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrinting\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan data-mce-fragment=\"1\"\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHotend : Swappable Print Cores\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeatbed : PEI coated flexible build plate (20 - 140 °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed-leveling : Inductive sensor-enabled bed leveling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnclosure : Single front door\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wi-Fi (2.4GHz + 5GHz),\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLive high resolution camera (view from desktop or app)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSoftware\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSlicing\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eControl\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSupported OS\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFile types\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePresliced files for S5 do not need reslicing \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eMaterials\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr data-mce-fragment=\"1\"\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2023-01-24T11:08:34-05:00","created_at":"2023-01-24T10:35:11-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2.85mm","Dual Extruder","Ultimaker 3D Printer","Ultimaker S7"],"price":1120400,"price_min":1120400,"price_max":1120400,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43629603717356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US7-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker S7 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":1120400,"weight":35000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202","options":["Title"],"media":[{"alt":null,"id":31234003239148,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBundle pricing available when you buy the S7 and Material Handling Station. Email us at service@voxelfactory.com for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe latest offering in 3D printing from UltiMaker, featuring dual extruders, swappable extrusion cores, an high resolution integrated camera for print monitoring, Wifi and USB printing, and built in Air Manager and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe integrated Air Manager filters out up to 95% of UFPs while also keeping the build\u003cbr data-mce-fragment=\"1\"\u003echamber temperature carefully regulated. The single door helps with heat loss by reducing the gaps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint head with inductive sensor: A new inductive sensor for bed leveling more\u003cbr data-mce-fragment=\"1\"\u003eaccurately probes the build plate. And automatic tilt compensation removes the need for\u003cbr data-mce-fragment=\"1\"\u003ethumbscrew bed calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdvanced active leveling: Reliable first-layer adhesion enables unattended use without manual leveling. Run-out and fan bracket sensors will pause your print and notify you if you run out of filament or if there is a clog that causes your print head to flood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFlexible build plate: The PEI-coated build plate makes for reliable print adhesion and removal. A sensor also assures your build plate will always be in place before printing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1080p camera: Checking on your print remotely via UltiMaker Digital Factory never\u003cbr data-mce-fragment=\"1\"\u003elooked better. The new 1080p camera in the UltiMaker S7 is mounted higher to give a\u003cbr data-mce-fragment=\"1\"\u003ebetter view of the first layers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWi-Fi 2.4 and 5 GHz: The UltiMaker S7 adds 5 GHz Wi-Fi compatibility, which cuts through\u003cbr data-mce-fragment=\"1\"\u003einterference to improve network stability, resulting in a more reliable wireless signal.\u003cbr data-mce-fragment=\"1\"\u003eThis is especially useful for companies that only allow connections via the 5 GHz band.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Ultimaker S7 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint file compatibility: The UltiMaker S7 was created with compatibility in mind. This\u003cbr data-mce-fragment=\"1\"\u003emeans that, if you own an UltiMaker S5, your entire digital library of S5 print files will\u003cbr data-mce-fragment=\"1\"\u003ework flawlessly on the S7 – with no re-slicing needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere. Access to security-assessed software – with remote printing, user management, and e-learning.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3 hours of free training at Voxel Factory\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExternal dimensions: 495 x 585 x 780 mm (19.5 x 23 x 30.7 in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 29.1 kg (64.2 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrinting\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan data-mce-fragment=\"1\"\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHotend : Swappable Print Cores\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeatbed : PEI coated flexible build plate (20 - 140 °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed-leveling : Inductive sensor-enabled bed leveling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnclosure : Single front door\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wi-Fi (2.4GHz + 5GHz),\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLive high resolution camera (view from desktop or app)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSoftware\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSlicing\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eControl\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSupported OS\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFile types\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePresliced files for S5 do not need reslicing \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eMaterials\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr data-mce-fragment=\"1\"\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":6910479204532,"title":"Ultimaker S5 Dual Extruder 3D Printer PRO Bundle","handle":"ultimaker-s5-dual-extruder-3d-printer-pro-bundle","description":"\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Ultimaker S5 Pro Bundle includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer?_pos=8\u0026amp;_sid=84293f853\u0026amp;_ss=r\"\u003eUltimaker S5 Dual Extruder 3D Printer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\"\u003eUltimaker S5 Air Manager \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\"\u003eUltimaker Material Handling Station\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/3dlac-plus-adhesive-solution?_pos=1\u0026amp;_sid=095177b47\u0026amp;_ss=r\"\u003e3Dlac adhesive spray\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\" data-mce-style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the PRO Bundle, you have automatic material handling, efficient air filtering, and filament humidity control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE, and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eUltimaker S5 3D Printer\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePro Bundle Assembled dimensions: 495 x 500 x 1197 mm (19.5 x 19.5 x 47.1 inches)  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003ePro Bundle Weight: 59.0 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology: Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height: Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder: Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0.4, and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter: 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature: 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed: Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling: Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure: Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors: Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating: 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay: 4.7-inch color touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial Handling Station\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical Dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity: 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type: dual-geared, abrasion-resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output: max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer:\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Ultimaker S5 3D printer\" href=\"https:\/\/www.voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAir Manager\u003c\/h3\u003e\n\u003cp\u003ePhysical Dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in)\u003c\/p\u003e\n\u003cp\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/p\u003e\n\u003cp\u003eNet weight: 3.6kg\u003c\/p\u003e\n\u003cp\u003eFilter technology: EPA E10 filter\u003c\/p\u003e\n\u003cp\u003eFan technology: low-noise brushless fan\u003c\/p\u003e\n\u003cp\u003eAir refresh rate: 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/p\u003e\n\u003cp\u003eFilter replacement is recommended every 1500 print hours (approx. 1 year)\u003c\/p\u003e\n\u003cp\u003eOperating sound: less than 51 dBA (including Ultimaker S5)\u003c\/p\u003e\n\u003cp\u003eCompatible printer: Ultimaker S5\u003c\/p\u003e\n\u003cp\u003eData \/ power connection: UMB connection (included)\u003c\/p\u003e\n\u003cp\u003eCompatible materials: Optimized for Ultimaker materials, 3rd party materials also supported.\u003c\/p\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Repetier-Host\" href=\"https:\/\/www.repetier.com\/\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","published_at":"2021-10-06T13:49:10-04:00","created_at":"2021-10-05T17:03:39-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["3Dprinters","Ultimaker","ultimaker s5"],"price":1450800,"price_min":1450800,"price_max":1450800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40769743061172,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US5-PRO-BUN","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker S5 Dual Extruder 3D Printer PRO Bundle","public_title":null,"options":["Default Title"],"price":1450800,"weight":29000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-View1_1400x_6d5c605f-6fe7-4b60-ace2-9a74cc790673.jpg?v=1642542735","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-7_1400x_3874c7b1-e6be-42ec-881c-58d4529b1e0c.jpg?v=1642542735","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-10_1400x_3f0ade3f-07b5-4912-93bf-c0bbadec8b86.jpg?v=1642542735","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-6_1400x_f55204e9-952b-4d6e-acb2-7402ee5d30c3.jpg?v=1642542735"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666","options":["Title"],"media":[{"alt":null,"id":29047538483436,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666","width":1400},{"alt":null,"id":29047541072108,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-View1_1400x_6d5c605f-6fe7-4b60-ace2-9a74cc790673.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-View1_1400x_6d5c605f-6fe7-4b60-ace2-9a74cc790673.jpg?v=1642542735","width":1400},{"alt":null,"id":29047539368172,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-7_1400x_3874c7b1-e6be-42ec-881c-58d4529b1e0c.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-7_1400x_3874c7b1-e6be-42ec-881c-58d4529b1e0c.jpg?v=1642542735","width":1400},{"alt":null,"id":29047539630316,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-10_1400x_3f0ade3f-07b5-4912-93bf-c0bbadec8b86.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-10_1400x_3f0ade3f-07b5-4912-93bf-c0bbadec8b86.jpg?v=1642542735","width":1400},{"alt":null,"id":29047538745580,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-6_1400x_f55204e9-952b-4d6e-acb2-7402ee5d30c3.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-6_1400x_f55204e9-952b-4d6e-acb2-7402ee5d30c3.jpg?v=1642542735","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Ultimaker S5 Pro Bundle includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer?_pos=8\u0026amp;_sid=84293f853\u0026amp;_ss=r\"\u003eUltimaker S5 Dual Extruder 3D Printer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\"\u003eUltimaker S5 Air Manager \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\"\u003eUltimaker Material Handling Station\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/3dlac-plus-adhesive-solution?_pos=1\u0026amp;_sid=095177b47\u0026amp;_ss=r\"\u003e3Dlac adhesive spray\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\" data-mce-style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the PRO Bundle, you have automatic material handling, efficient air filtering, and filament humidity control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE, and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eUltimaker S5 3D Printer\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePro Bundle Assembled dimensions: 495 x 500 x 1197 mm (19.5 x 19.5 x 47.1 inches)  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003ePro Bundle Weight: 59.0 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology: Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height: Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder: Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0.4, and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter: 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature: 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed: Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling: Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure: Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors: Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating: 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay: 4.7-inch color touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial Handling Station\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical Dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity: 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type: dual-geared, abrasion-resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output: max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer:\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Ultimaker S5 3D printer\" href=\"https:\/\/www.voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAir Manager\u003c\/h3\u003e\n\u003cp\u003ePhysical Dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in)\u003c\/p\u003e\n\u003cp\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/p\u003e\n\u003cp\u003eNet weight: 3.6kg\u003c\/p\u003e\n\u003cp\u003eFilter technology: EPA E10 filter\u003c\/p\u003e\n\u003cp\u003eFan technology: low-noise brushless fan\u003c\/p\u003e\n\u003cp\u003eAir refresh rate: 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/p\u003e\n\u003cp\u003eFilter replacement is recommended every 1500 print hours (approx. 1 year)\u003c\/p\u003e\n\u003cp\u003eOperating sound: less than 51 dBA (including Ultimaker S5)\u003c\/p\u003e\n\u003cp\u003eCompatible printer: Ultimaker S5\u003c\/p\u003e\n\u003cp\u003eData \/ power connection: UMB connection (included)\u003c\/p\u003e\n\u003cp\u003eCompatible materials: Optimized for Ultimaker materials, 3rd party materials also supported.\u003c\/p\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Repetier-Host\" href=\"https:\/\/www.repetier.com\/\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e"}

{"id":756386332790,"title":"Ultimaker S5 Dual Extruder 3D Printer","handle":"ultimaker-s5-dual-extruder-3d-printer","description":"\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ca href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" title=\"Send an email to ask for a quote\" target=\"_blank\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBundle pricing available when you buy the S5, Air Manager and Material Station. Email us for a quote with the link above. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.repetier.com\/\" title=\"Repetier-Host\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" title=\"Link to Download page for Cura Connect by Ultimaker\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2018-04-23T05:36:12-04:00","created_at":"2018-04-17T13:37:32-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["3Dprinters","Ultimaker"],"price":938300,"price_min":938300,"price_max":938300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8122029408374,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US5-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S5 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":938300,"weight":29000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874982375","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1642542848","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1642542860","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1642542866"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836","options":["Title"],"media":[{"alt":null,"id":29047543922924,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836","width":1400},{"alt":null,"id":29047544217836,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1642542848"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1642542848","width":1400},{"alt":null,"id":29047544545516,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1642542860"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1642542860","width":1400},{"alt":null,"id":29047544643820,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1642542866"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1642542866","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ca href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" title=\"Send an email to ask for a quote\" target=\"_blank\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBundle pricing available when you buy the S5, Air Manager and Material Station. Email us for a quote with the link above. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.repetier.com\/\" title=\"Repetier-Host\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" title=\"Link to Download page for Cura Connect by Ultimaker\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}

{"id":3956271153270,"title":"Material Handling Station for Ultimaker S5","handle":"material-handling-station-for-ultimaker-s5","description":"\u003cdiv align=\"justify\"\u003e\n \u003cp\u003eGet more out of your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e with the Material Station. Load up to six spools of filament in a humidity-controlled, fully enclosed compartment. The station integrates with Cura to enable live spool switching for uninterrupted, hassle-free printing.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy loading : front-facing loading for up to six spools of filament\u003c\/li\u003e\n\u003cli\u003eUninterrupted printing : automatic spool switching when a spool runs out\u003c\/li\u003e\n\u003cli\u003eHumidity control : intelligent atmospheric management and self-regenerating desiccant ensures optimal environmental conditions for your filament\u003c\/li\u003e\n\u003cli\u003eEasy setup and monitoring : NFC material recognition for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, fully integrates with Cura software.\u003c\/li\u003e\n\u003cli\u003eComposite materials compatibility\u003c\/li\u003e\n\u003cli\u003eCompatible with Ultimaker and 3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity : 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type : dual-geared, abrasion resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output : max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration : Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:03:21-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","s5","ultimaker","ultimaker s5"],"price":512900,"price_min":512900,"price_max":512900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505191444598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-MHS-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Material Handling Station for Ultimaker S5","public_title":null,"options":["Default Title"],"price":512900,"weight":20000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874980999","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","options":["Title"],"media":[{"alt":null,"id":29047547035884,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","width":1400},{"alt":null,"id":29047547265260,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977","width":1400},{"alt":null,"id":29047547363564,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n \u003cp\u003eGet more out of your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e with the Material Station. Load up to six spools of filament in a humidity-controlled, fully enclosed compartment. The station integrates with Cura to enable live spool switching for uninterrupted, hassle-free printing.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy loading : front-facing loading for up to six spools of filament\u003c\/li\u003e\n\u003cli\u003eUninterrupted printing : automatic spool switching when a spool runs out\u003c\/li\u003e\n\u003cli\u003eHumidity control : intelligent atmospheric management and self-regenerating desiccant ensures optimal environmental conditions for your filament\u003c\/li\u003e\n\u003cli\u003eEasy setup and monitoring : NFC material recognition for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, fully integrates with Cura software.\u003c\/li\u003e\n\u003cli\u003eComposite materials compatibility\u003c\/li\u003e\n\u003cli\u003eCompatible with Ultimaker and 3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity : 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type : dual-geared, abrasion resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output : max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration : Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}

{"id":3956284031094,"title":"Ultimaker Air Manager for Ultimaker S5","handle":"ultimaker-air-manager-for-ultimaker-s5","description":"\u003cdiv align=\"justify\"\u003e\n \u003cp\u003eSitting atop your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp\u003eThrough Cura and the Ultimaker S5, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\" title=\"Replacement filter for Ultimaker Air Manager\" rel=\"noopener noreferrer\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPA filter\u003c\/li\u003e\n\u003cli\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in) \u003c\/li\u003e\n\u003cli\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 3.6kg\u003c\/li\u003e\n\u003cli\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli\u003eOperating sound : less than 51 dBA (including Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli\u003eCompatible materials : Optimized for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:45:22-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","enclosure","s5","ultimaker"],"price":141600,"price_min":141600,"price_max":141600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505260650614,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-AIR-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Air Manager for Ultimaker S5","public_title":null,"options":["Default Title"],"price":141600,"weight":8100,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874981002","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1642543068","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2_1400x_1400x_f17b4fa1-bb4a-49bb-a3ee-af92376649ba.jpg?v=1642543167","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3_1400x_1400x_847f8607-3e25-43ce-9ce7-03ade6f0b7ce.jpg?v=1642543177"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1642543068","options":["Title"],"media":[{"alt":null,"id":29047548969196,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1642543068"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1642543068","width":1400},{"alt":null,"id":29047551656172,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2_1400x_1400x_f17b4fa1-bb4a-49bb-a3ee-af92376649ba.jpg?v=1642543167"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2_1400x_1400x_f17b4fa1-bb4a-49bb-a3ee-af92376649ba.jpg?v=1642543167","width":1400},{"alt":null,"id":29047552049388,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3_1400x_1400x_847f8607-3e25-43ce-9ce7-03ade6f0b7ce.jpg?v=1642543177"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3_1400x_1400x_847f8607-3e25-43ce-9ce7-03ade6f0b7ce.jpg?v=1642543177","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n \u003cp\u003eSitting atop your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp\u003eThrough Cura and the Ultimaker S5, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\" title=\"Replacement filter for Ultimaker Air Manager\" rel=\"noopener noreferrer\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPA filter\u003c\/li\u003e\n\u003cli\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in) \u003c\/li\u003e\n\u003cli\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 3.6kg\u003c\/li\u003e\n\u003cli\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli\u003eOperating sound : less than 51 dBA (including Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli\u003eCompatible materials : Optimized for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}

{"id":3956269547638,"title":"Ultimaker S3 Dual Extruder 3D Printer","handle":"ultimaker-s3-dual-extruder-3d-printer","description":"\u003cdiv align=\"justify\"\u003e\n \u003cp\u003eThe newest addition to the S line of Ultimaker 3D printers, the Ultimaker S3 offers all the advantages of the \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 dual extruder 3D printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e in a compact, efficient package. Ready to print carbon or fiber glass composite materials for stronger, tougher parts, and more reliable than ever, the Ultimaker S3 will help streamline your workflow for parts and prototype production.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Ultimaker S3 allows you to print with a wide range of materials, including Nylon, PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want. The printer comes with a spool of Tough PLA and a spool of PVA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKey features :\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNetwork connectivity over Wifi, or LAN, or cloud. USB printing also available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront door for optimal printing environment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdvanced active bed leveling for reliable first-layer adhesion, allows unattended use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNFC material recognition with complete Cura software integration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMaterial flow sensor detects end-of-filament and pauses the printer\u003c\/li\u003e\n\u003cli\u003eComposite material compatible : nylon or carbon fiber reinforced filament ready\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 394 x 489 x 637 mm (15.5 x 19.3 x 25.1 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 14.4 kg (31.7 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 230 x 190 x 200 mm (9 x 7.4 x 7.9 in)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 8740cm³ (526in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : dual reinforced extruders\u003c\/li\u003e\n\u003cli\u003eHotend : dual print cores\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : \u003ca href=\"\/products\/ultimaker-print-core-0-4mm\" title=\"Ultimaker print core 0.4mm\" target=\"_blank\"\u003e0.4mm\u003c\/a\u003e (included), \u003ca href=\"\/products\/ultimaker-print-core-0-25mm\" title=\"Ultimaker Print Core 0.25mm\" target=\"_blank\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-print-core-cc-0-6mm\" title=\"Ultimaker print core CC 0.6mm\" target=\"_blank\"\u003e0.6mm\u003c\/a\u003e or \u003ca href=\"\/products\/ultimaker-print-core-0-8mm\" title=\"Ultimaker print core 0.8mm\" target=\"_blank\"\u003e0.8mm\u003c\/a\u003e (sold separately)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : heated glass plate (20 - 14\u003cspan\u003e0°C\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eBed leveling : advanced active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis motors : step motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" title=\"Ultimaker Cura at ultimaker.com\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Connect\u003c\/li\u003e\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eABS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCPE \/ CPE+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU 95A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3rd party materials.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T13:59:57-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":[],"price":600800,"price_min":600800,"price_max":600800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505185579126,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US3-STD-285","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S3 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":600800,"weight":16500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874961026","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1642543347","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-2_1400x_efdd8441-89b3-4a92-a4b3-3343e2f6a1c8.jpg?v=1642543355","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x_aa5f33f6-841b-44f6-851f-a86b36bbeeee.jpg?v=1642543367","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x-2_1400x_f1e16716-8b63-42a8-a8b6-15beaf9f20eb.jpg?v=1644246041"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1642543347","options":["Title"],"media":[{"alt":null,"id":29047557030124,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1642543347"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1642543347","width":1400},{"alt":null,"id":29047557259500,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-2_1400x_efdd8441-89b3-4a92-a4b3-3343e2f6a1c8.jpg?v=1642543355"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-2_1400x_efdd8441-89b3-4a92-a4b3-3343e2f6a1c8.jpg?v=1642543355","width":1400},{"alt":null,"id":29047557587180,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x_aa5f33f6-841b-44f6-851f-a86b36bbeeee.jpg?v=1642543367"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x_aa5f33f6-841b-44f6-851f-a86b36bbeeee.jpg?v=1642543367","width":1400},{"alt":null,"id":29148121956588,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x-2_1400x_f1e16716-8b63-42a8-a8b6-15beaf9f20eb.jpg?v=1644246041"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x-2_1400x_f1e16716-8b63-42a8-a8b6-15beaf9f20eb.jpg?v=1644246041","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n \u003cp\u003eThe newest addition to the S line of Ultimaker 3D printers, the Ultimaker S3 offers all the advantages of the \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5 dual extruder 3D printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e in a compact, efficient package. Ready to print carbon or fiber glass composite materials for stronger, tougher parts, and more reliable than ever, the Ultimaker S3 will help streamline your workflow for parts and prototype production.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Ultimaker S3 allows you to print with a wide range of materials, including Nylon, PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want. The printer comes with a spool of Tough PLA and a spool of PVA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKey features :\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNetwork connectivity over Wifi, or LAN, or cloud. USB printing also available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront door for optimal printing environment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdvanced active bed leveling for reliable first-layer adhesion, allows unattended use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNFC material recognition with complete Cura software integration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMaterial flow sensor detects end-of-filament and pauses the printer\u003c\/li\u003e\n\u003cli\u003eComposite material compatible : nylon or carbon fiber reinforced filament ready\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 394 x 489 x 637 mm (15.5 x 19.3 x 25.1 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 14.4 kg (31.7 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 230 x 190 x 200 mm (9 x 7.4 x 7.9 in)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 8740cm³ (526in³)\u003c\/li\u003e\n\u003cli\u003eLayer height : starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder : dual reinforced extruders\u003c\/li\u003e\n\u003cli\u003eHotend : dual print cores\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : \u003ca href=\"\/products\/ultimaker-print-core-0-4mm\" title=\"Ultimaker print core 0.4mm\" target=\"_blank\"\u003e0.4mm\u003c\/a\u003e (included), \u003ca href=\"\/products\/ultimaker-print-core-0-25mm\" title=\"Ultimaker Print Core 0.25mm\" target=\"_blank\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-print-core-cc-0-6mm\" title=\"Ultimaker print core CC 0.6mm\" target=\"_blank\"\u003e0.6mm\u003c\/a\u003e or \u003ca href=\"\/products\/ultimaker-print-core-0-8mm\" title=\"Ultimaker print core 0.8mm\" target=\"_blank\"\u003e0.8mm\u003c\/a\u003e (sold separately)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : heated glass plate (20 - 14\u003cspan\u003e0°C\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eBed leveling : advanced active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure : front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis motors : step motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" title=\"Ultimaker Cura at ultimaker.com\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Connect\u003c\/li\u003e\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eABS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCPE \/ CPE+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU 95A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3rd party materials.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}

{"id":6059531567284,"title":"Ultimaker 2+ Connect Single nozzle 3D printer","handle":"ultimaker-2-connect-3d-printer","description":"\u003cdiv align=\"justify\"\u003e\n \u003cp\u003eThe newest addition to Ultimaker's line of FFF printers, The Ultimaker 2+ Connect. A single nozzle printer with networking capabilities and a new touchscreen, the Ultimaker 2+ Connect is your reliable first step into our world of easy, remote 3D printing. Simply unbox and connect three components, and get started. This speedy setup even makes installing multiple 3D printers effortless.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Ultimaker 2+ Connect allows you to print with a wide range of materials, including,  Nylon, PLA, ABS, CPE and TPU. The printer comes with a 750g spool of Ultimaker Silver PLA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Key Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork connectivity: Via Wi-Fi or Ethernet, print\u003cbr\u003eremotely over the cloud with added security\u003c\/li\u003e\n\u003cli\u003eNext-gen components: A stiffer build platform\u003cbr\u003eand rigorously tested material profiles ensure\u003cbr\u003ereliable printing\u003c\/li\u003e\n\u003cli\u003eTouchscreen: For every action, the 2.4” color\u003cbr\u003etouchscreen gives you intuitive control and assistance\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNFC material recognition with complete Cura software integration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eEnhanced safety: The Ultimaker 2+ Connect Air\u003cbr\u003eManager removes up to 95% of ultrafine particles and\u003cbr\u003eshields users from hot components (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBundle pricing available with Air Manager\/Door accessories, email us for a quote. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 460 x 580 mm (13.5 x 18.1 x 22.8 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 10.3 kg (22.7 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eSingle extrusion with swappable nozzles; \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.4 mm (included)\u003cbr data-mce-fragment=\"1\"\u003e0.25, 0.6, 0.8 mm (sold separately)\u003c\/li\u003e\n\u003cli\u003eLayer Resolution: 0.25 mm nozzle: 150 - 60 micron\u003cbr data-mce-fragment=\"1\"\u003e                            0.4 mm nozzle: 200 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e                            0.6 mm nozzle: 400 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e                            0.8 mm nozzle: 600 - 20 micron\u003c\/li\u003e\n\u003cli\u003eBuild Dimensions: 223 x 220 x 205 mm (8.7 x 8.6 x 8 in)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : heated glass plate (20 - 110\u003cspan\u003e°C\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eBed leveling : Manual bed leveling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnclosure: The Ultimaker 2+ Connect Air\u003cbr data-mce-fragment=\"1\"\u003eManager (Sold separately)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis motors : step motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Ultimaker Cura at ultimaker.com\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Connect\u003c\/li\u003e\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eABS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCPE \/ CPE+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU 95A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3rd party materials.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","published_at":"2020-11-10T04:00:01-05:00","created_at":"2020-11-05T17:37:49-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2.85mm","3Dprinters","nozzle","Ultimaker"],"price":371300,"price_min":371300,"price_max":371300,"available":true,"price_varies":false,"compare_at_price":379500,"compare_at_price_min":379500,"compare_at_price_max":379500,"compare_at_price_varies":false,"variants":[{"id":37454769291444,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-2PC-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker 2+ Connect Single nozzle 3D printer","public_title":null,"options":["Default Title"],"price":371300,"weight":10300,"compare_at_price":379500,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8719874982580","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1642543479","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-2_1400x_f7ac0f6a-1eca-4dea-b811-33654af89638.jpg?v=1642543495","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-3_1400x_0d028828-8bcf-4fba-bb04-7c03770e3faa.jpg?v=1642543502","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-4_1400x_a103b472-6c5d-4c6c-8d77-b6c9d2c3fb19.jpg?v=1642543508"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1642543479","options":["Title"],"media":[{"alt":null,"id":29047560601836,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1642543479"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1642543479","width":1400},{"alt":null,"id":29047560896748,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-2_1400x_f7ac0f6a-1eca-4dea-b811-33654af89638.jpg?v=1642543495"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-2_1400x_f7ac0f6a-1eca-4dea-b811-33654af89638.jpg?v=1642543495","width":1400},{"alt":null,"id":29047561486572,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-3_1400x_0d028828-8bcf-4fba-bb04-7c03770e3faa.jpg?v=1642543502"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-3_1400x_0d028828-8bcf-4fba-bb04-7c03770e3faa.jpg?v=1642543502","width":1400},{"alt":null,"id":29047561715948,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-4_1400x_a103b472-6c5d-4c6c-8d77-b6c9d2c3fb19.jpg?v=1642543508"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-4_1400x_a103b472-6c5d-4c6c-8d77-b6c9d2c3fb19.jpg?v=1642543508","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n \u003cp\u003eThe newest addition to Ultimaker's line of FFF printers, The Ultimaker 2+ Connect. A single nozzle printer with networking capabilities and a new touchscreen, the Ultimaker 2+ Connect is your reliable first step into our world of easy, remote 3D printing. Simply unbox and connect three components, and get started. This speedy setup even makes installing multiple 3D printers effortless.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Ultimaker 2+ Connect allows you to print with a wide range of materials, including,  Nylon, PLA, ABS, CPE and TPU. The printer comes with a 750g spool of Ultimaker Silver PLA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Key Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork connectivity: Via Wi-Fi or Ethernet, print\u003cbr\u003eremotely over the cloud with added security\u003c\/li\u003e\n\u003cli\u003eNext-gen components: A stiffer build platform\u003cbr\u003eand rigorously tested material profiles ensure\u003cbr\u003ereliable printing\u003c\/li\u003e\n\u003cli\u003eTouchscreen: For every action, the 2.4” color\u003cbr\u003etouchscreen gives you intuitive control and assistance\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNFC material recognition with complete Cura software integration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eEnhanced safety: The Ultimaker 2+ Connect Air\u003cbr\u003eManager removes up to 95% of ultrafine particles and\u003cbr\u003eshields users from hot components (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBundle pricing available with Air Manager\/Door accessories, email us for a quote. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 460 x 580 mm (13.5 x 18.1 x 22.8 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 10.3 kg (22.7 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eSingle extrusion with swappable nozzles; \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.4 mm (included)\u003cbr data-mce-fragment=\"1\"\u003e0.25, 0.6, 0.8 mm (sold separately)\u003c\/li\u003e\n\u003cli\u003eLayer Resolution: 0.25 mm nozzle: 150 - 60 micron\u003cbr data-mce-fragment=\"1\"\u003e                            0.4 mm nozzle: 200 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e                            0.6 mm nozzle: 400 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e                            0.8 mm nozzle: 600 - 20 micron\u003c\/li\u003e\n\u003cli\u003eBuild Dimensions: 223 x 220 x 205 mm (8.7 x 8.6 x 8 in)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed : heated glass plate (20 - 110\u003cspan\u003e°C\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eBed leveling : Manual bed leveling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnclosure: The Ultimaker 2+ Connect Air\u003cbr data-mce-fragment=\"1\"\u003eManager (Sold separately)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis motors : step motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Ultimaker Cura at ultimaker.com\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Connect\u003c\/li\u003e\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eABS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCPE \/ CPE+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU 95A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3rd party materials.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n"}

{"id":6060494946484,"title":"Ultimaker Air Manager for Ultimaker 2+ Connect","handle":"ultimaker-air-manager-for-ultimaker-2-connect","description":"\u003cp data-mce-fragment=\"1\"\u003eSitting atop your \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-2-connect-3d-printer?_pos=7\u0026amp;_sid=0c7b9f213\u0026amp;_ss=r\" title=\"Ultimaker S5 3D printer\"\u003eUltimaker 2+ Connect\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThrough Cura and the Ultimaker 2+ Connect, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey features :\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEPA filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhysical dimensions : 328 x 459 x 257 mm (12.9 x 18.1 x 10.1 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions (including 2+ Connect) : 342 x 460 x 636 mm (13.5 x 18.1 x 25 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNet weight : 2.65kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating sound : less than 51 dBA (including Ultimaker 2+ Connect)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible printer : \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker 2+ Connect\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible materials : Optimized for \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-10T04:00:01-05:00","created_at":"2020-11-06T18:48:27-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2+ connect","3Dprinters","add-on","enclosure","Ultimaker"],"price":64100,"price_min":64100,"price_max":64100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37482026827956,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3PD-AIR-2PC-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Air Manager for Ultimaker 2+ Connect","public_title":null,"options":["Default Title"],"price":64100,"weight":0,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874982696","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1641831770","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1641831756","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1641831762"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770","options":["Title"],"media":[{"alt":null,"id":29003234672876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770","width":1400},{"alt":null,"id":29003233722604,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1641831770"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1641831770","width":1400},{"alt":null,"id":29003235426540,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1641831756"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1641831756","width":1400},{"alt":null,"id":29003235852524,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1641831762"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1641831762","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eSitting atop your \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-2-connect-3d-printer?_pos=7\u0026amp;_sid=0c7b9f213\u0026amp;_ss=r\" title=\"Ultimaker S5 3D printer\"\u003eUltimaker 2+ Connect\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThrough Cura and the Ultimaker 2+ Connect, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey features :\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEPA filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhysical dimensions : 328 x 459 x 257 mm (12.9 x 18.1 x 10.1 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions (including 2+ Connect) : 342 x 460 x 636 mm (13.5 x 18.1 x 25 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNet weight : 2.65kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating sound : less than 51 dBA (including Ultimaker 2+ Connect)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible printer : \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker 2+ Connect\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible materials : Optimized for \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":7839025496300,"title":"Ultimaker PVA Removal Station","handle":"ultimaker-pva-station","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe Ultimaker PVA Removal Station features a high-speed dissolving process driven by a magnetic rotor. Compared with motionless water in an improvised container, it removes PVA up to four times faster - even from hard-to-reach cavities in complex designs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSo you have parts ready as soon as possible.\u003c\/p\u003e\n\u003cp\u003eRotor-powered circulation: A magnetic rotor circulates water to reach all parts of your 3D print\u003c\/p\u003e\n\u003cp\u003eAdjustable rotor speed: Adjust for faster dissolving or to protect fragile parts\u003c\/p\u003e\n\u003cp\u003eKeeps prints secured: A rinsing basket keeps prints in place and submerged\u003c\/p\u003e\n\u003cp\u003eEasy to follow progress: A transparent, illuminated container makes it easy to know exactly when your part is ready\u003c\/p\u003e\n\u003cp\u003eLow maintenance: Ergonomically designed for easy cleaning\u003c\/p\u003e\n\u003cp\u003eNo chemicals needed: Just fill with regular tap water, which can be safely disposed of when finished\u003c\/p\u003e\n\u003cp\u003eClean and no-mess: Ergonomic design features help keep your workspace clean and tidy\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for PLA with PVA\u003c\/li\u003e\n\u003cli\u003eAlso works with PETG, Tough PLA, Nylon, CPE\u003c\/li\u003e\n\u003cli\u003eCompatible with any water soluble material\u003c\/li\u003e\n\u003cli\u003eSupported solvents: Water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 303 x 325 x 374 mm (7.8 x 9 x 6.4 in)\u003c\/li\u003e\n\u003cli\u003eWith handle extended : 528 mm \u003c\/li\u003e\n\u003cli\u003eContainer volume: 13.7L\/3.6 Gal\u003c\/li\u003e\n\u003cli\u003eWeight: 6.35 kg\u003c\/li\u003e\n\u003cli\u003eMaximum part size: XYZ - 200 x 230 x 165 mm\u003c\/li\u003e\n\u003cli\u003eRotational speed: 100 RPM (low) to 225 RMP (high)\u003c\/li\u003e\n\u003cli\u003eOperational sound \u0026gt;50 dBA\u003c\/li\u003e\n\u003cli\u003ePower input : 120 - 240 VAC\u003c\/li\u003e\n\u003cli\u003ePower output : 38 W\u003c\/li\u003e\n\u003cli\u003eFrequency: 50-60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1IridfQnWV1O8cS_NLHRMuRcGcTw86fq3\" title=\"Technical Data Sheet\" target=\"_blank\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2023-05-04T08:43:29-04:00","created_at":"2022-12-02T17:24:18-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","ultimaker"],"price":147800,"price_min":147800,"price_max":147800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43539319881964,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-PVA-REM-STN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker PVA Removal Station","public_title":null,"options":["Default Title"],"price":147800,"weight":8500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station.webp?v=1683204975","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station_Image_2.webp?v=1683204974"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station.webp?v=1683204975","options":["Title"],"media":[{"alt":null,"id":31591842414828,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station.webp?v=1683204975"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station.webp?v=1683204975","width":1400},{"alt":null,"id":31591842447596,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station_Image_2.webp?v=1683204974"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station_Image_2.webp?v=1683204974","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe Ultimaker PVA Removal Station features a high-speed dissolving process driven by a magnetic rotor. Compared with motionless water in an improvised container, it removes PVA up to four times faster - even from hard-to-reach cavities in complex designs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSo you have parts ready as soon as possible.\u003c\/p\u003e\n\u003cp\u003eRotor-powered circulation: A magnetic rotor circulates water to reach all parts of your 3D print\u003c\/p\u003e\n\u003cp\u003eAdjustable rotor speed: Adjust for faster dissolving or to protect fragile parts\u003c\/p\u003e\n\u003cp\u003eKeeps prints secured: A rinsing basket keeps prints in place and submerged\u003c\/p\u003e\n\u003cp\u003eEasy to follow progress: A transparent, illuminated container makes it easy to know exactly when your part is ready\u003c\/p\u003e\n\u003cp\u003eLow maintenance: Ergonomically designed for easy cleaning\u003c\/p\u003e\n\u003cp\u003eNo chemicals needed: Just fill with regular tap water, which can be safely disposed of when finished\u003c\/p\u003e\n\u003cp\u003eClean and no-mess: Ergonomic design features help keep your workspace clean and tidy\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for PLA with PVA\u003c\/li\u003e\n\u003cli\u003eAlso works with PETG, Tough PLA, Nylon, CPE\u003c\/li\u003e\n\u003cli\u003eCompatible with any water soluble material\u003c\/li\u003e\n\u003cli\u003eSupported solvents: Water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 303 x 325 x 374 mm (7.8 x 9 x 6.4 in)\u003c\/li\u003e\n\u003cli\u003eWith handle extended : 528 mm \u003c\/li\u003e\n\u003cli\u003eContainer volume: 13.7L\/3.6 Gal\u003c\/li\u003e\n\u003cli\u003eWeight: 6.35 kg\u003c\/li\u003e\n\u003cli\u003eMaximum part size: XYZ - 200 x 230 x 165 mm\u003c\/li\u003e\n\u003cli\u003eRotational speed: 100 RPM (low) to 225 RMP (high)\u003c\/li\u003e\n\u003cli\u003eOperational sound \u0026gt;50 dBA\u003c\/li\u003e\n\u003cli\u003ePower input : 120 - 240 VAC\u003c\/li\u003e\n\u003cli\u003ePower output : 38 W\u003c\/li\u003e\n\u003cli\u003eFrequency: 50-60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1IridfQnWV1O8cS_NLHRMuRcGcTw86fq3\" title=\"Technical Data Sheet\" target=\"_blank\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}

{"id":7674494714092,"title":"Ultimaker Metal Expansion Kit","handle":"metal-expansion-kit","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eTake advantage of a new range of metal 3D printing applications by upgrading the Ultimaker S5 with the Metal Expansion Kit. Its seamless workflow makes creating stainless steel parts easier, more efficient, and affordable.\u003c\/p\u003e\n\u003cp\u003eHow it works\u003c\/p\u003e\n\u003cp\u003e1. Print with BASF Forward AM Ultrafuse® 17-4 PH stainless steel filament to create a “green part”\u003c\/p\u003e\n\u003cp\u003e2. Send your green part for post-processing by BASF’s network of certified debinding and sintering services\u003c\/p\u003e\n\u003cp\u003e3. Track debinding and sintering progress via an online portal, and receive your part back in 10 business days\u003c\/p\u003e\n\u003cp\u003e4. Put your finished metal part to use – from small series of tools to auxiliary components\u003c\/p\u003e\n\u003ch4\u003eWhy choose the Metal Expansion Kit?\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAn end-to-end metal 3D printing workflow - \u003c\/strong\u003eThe Ultimaker Metal Expansion Kit provides access to software optimizations, post-processing services, and extensive e-learning modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign and print high-quality steel parts\u003c\/strong\u003e - 17-4 PH stainless steel plus a metal-optimized support material2 offers the freedom to create strong parts with complex geometries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal parts. Up to 90% cheaper\u003c\/strong\u003e - Comparing the Ultimaker S5 and Metal Expansion Kit to CNC and other additive methods, you can save up to 90% creating the metal tools and parts you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic or metal? You decide\u003c\/strong\u003e - 3D print either plastic or metal depending on your needs. Simply swap materials and change out the print cores, for more versatility and potential applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBASF Forward AM Ultrafuse® 17-4 PH filament (1 kg)\u003c\/li\u003e\n\u003cli\u003ePackaging for green parts and voucher for post-processing\u003c\/li\u003e\n\u003cli\u003eUltimaker Print Core CC 0.4\u003c\/li\u003e\n\u003cli\u003eMagigoo Pro Metal (50 ml) adhesive\u003c\/li\u003e\n\u003cli\u003eFree Ultimaker Cura software with optimized metal part slicing features\u003c\/li\u003e\n\u003cli\u003eAccess to exclusive metal FFF e-learning content on Ultimaker Academy \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e**Please note that the use of the \u003ca title=\"Ultimaker Air Manager for Ultimaker S5\" href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-air-manager-for-ultimaker-s5\" target=\"_blank\"\u003eAir Manager\u003c\/a\u003e is strongly recommended when printing with BASF Forward AM Ultrafuse® 17-4 PH material**\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cstrong\u003e** Please note that the Metal Expansion Kit is not compatible with the Material Station, you will have to disconnect it and feed from the back while using the Metal Expansion Kit**\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eCompatibili\u003c\/strong\u003ety\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Ultimaker S5 Dual Extruder 3D Printer\" href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003e\u003cspan\u003eUltimaker S5 3D Printer\u003c\/span\u003e\u003c\/a\u003e with \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-air-manager-for-ultimaker-s5\"\u003eUltimaker Air Manager\u003c\/a\u003e equipped. \u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSoftware\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eUltimaker Cura Software\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2022-11-10T10:39:16-05:00","created_at":"2022-06-21T17:20:57-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["magigoo","print core","s5","Ultimaker Air Manager","ultimaker s5"],"price":96400,"price_min":96400,"price_max":96400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42916772118764,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-MTL-EXP-KIT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Metal Expansion Kit","public_title":null,"options":["Default Title"],"price":96400,"weight":2700,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_Metal_Expansion_Kit.webp?v=1668095651"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_Metal_Expansion_Kit.webp?v=1668095651","options":["Title"],"media":[{"alt":null,"id":30774061760748,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_Metal_Expansion_Kit.webp?v=1668095651"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_Metal_Expansion_Kit.webp?v=1668095651","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eTake advantage of a new range of metal 3D printing applications by upgrading the Ultimaker S5 with the Metal Expansion Kit. Its seamless workflow makes creating stainless steel parts easier, more efficient, and affordable.\u003c\/p\u003e\n\u003cp\u003eHow it works\u003c\/p\u003e\n\u003cp\u003e1. Print with BASF Forward AM Ultrafuse® 17-4 PH stainless steel filament to create a “green part”\u003c\/p\u003e\n\u003cp\u003e2. Send your green part for post-processing by BASF’s network of certified debinding and sintering services\u003c\/p\u003e\n\u003cp\u003e3. Track debinding and sintering progress via an online portal, and receive your part back in 10 business days\u003c\/p\u003e\n\u003cp\u003e4. Put your finished metal part to use – from small series of tools to auxiliary components\u003c\/p\u003e\n\u003ch4\u003eWhy choose the Metal Expansion Kit?\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAn end-to-end metal 3D printing workflow - \u003c\/strong\u003eThe Ultimaker Metal Expansion Kit provides access to software optimizations, post-processing services, and extensive e-learning modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign and print high-quality steel parts\u003c\/strong\u003e - 17-4 PH stainless steel plus a metal-optimized support material2 offers the freedom to create strong parts with complex geometries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal parts. Up to 90% cheaper\u003c\/strong\u003e - Comparing the Ultimaker S5 and Metal Expansion Kit to CNC and other additive methods, you can save up to 90% creating the metal tools and parts you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic or metal? You decide\u003c\/strong\u003e - 3D print either plastic or metal depending on your needs. Simply swap materials and change out the print cores, for more versatility and potential applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBASF Forward AM Ultrafuse® 17-4 PH filament (1 kg)\u003c\/li\u003e\n\u003cli\u003ePackaging for green parts and voucher for post-processing\u003c\/li\u003e\n\u003cli\u003eUltimaker Print Core CC 0.4\u003c\/li\u003e\n\u003cli\u003eMagigoo Pro Metal (50 ml) adhesive\u003c\/li\u003e\n\u003cli\u003eFree Ultimaker Cura software with optimized metal part slicing features\u003c\/li\u003e\n\u003cli\u003eAccess to exclusive metal FFF e-learning content on Ultimaker Academy \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e**Please note that the use of the \u003ca title=\"Ultimaker Air Manager for Ultimaker S5\" href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-air-manager-for-ultimaker-s5\" target=\"_blank\"\u003eAir Manager\u003c\/a\u003e is strongly recommended when printing with BASF Forward AM Ultrafuse® 17-4 PH material**\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cstrong\u003e** Please note that the Metal Expansion Kit is not compatible with the Material Station, you will have to disconnect it and feed from the back while using the Metal Expansion Kit**\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eCompatibili\u003c\/strong\u003ety\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Ultimaker S5 Dual Extruder 3D Printer\" href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003e\u003cspan\u003eUltimaker S5 3D Printer\u003c\/span\u003e\u003c\/a\u003e with \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-air-manager-for-ultimaker-s5\"\u003eUltimaker Air Manager\u003c\/a\u003e equipped. \u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSoftware\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eUltimaker Cura Software\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}