Textured Powder-coated Print Sheet [CORE One L]

{"id":9301988081900,"title":"PA Nylon Powder-coated Print Sheet [CORE One L]","handle":"pa-nylon-powder-coated-print-sheet-core-one-l","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11. You can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in Prusa's \u003ca rel=\"noopener\" href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT!\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface of this sheet should be cleaned only with pure water. Using common agents such as IPA or Acetone will lead to a quick deterioration of the surface. Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eConsumable parts, such as PEI sheets (smooth, textured, nylon, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote that with the Original Prusa XL, the PA Nylon sheet wear is especially noticeable at the Z probing points, where the nozzle leaves visible marks on the surface. This does not affect the surface adhesion and overall printability. You can examine the marks in Prusa's knowledgebase article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA new batch of the PA Nylon sheet will be released during July \/ August 2024. The new version will get a slightly rougher surface texture. This change will not affect the print sheet's functional properties. You can examine the changes in Prusa's knowledge base article as well.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/old_vs_new_texture_sheet_I.avif?v=1782762438\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eOld texture (left) vs new texture (right)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mirror_effect_III.avif?v=1782762480\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eGlossier surface after print removal\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mirror_effect_VI.avif?v=1782762507\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eVisible marks at Z probing points\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat for polyamide-based materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for a glue stick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be cleaned just with water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSuitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be damaged with IPA and acetone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-29T15:48:51-04:00","created_at":"2026-06-29T15:35:20-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L","prusa"],"price":19499,"price_min":19499,"price_max":19499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865010258156,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-COL-NYL-BST-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"PA Nylon Powder-coated Print Sheet [CORE One L]","public_title":null,"options":["Default Title"],"price":19499,"weight":450,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture.webp?v=1782761671"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture.webp?v=1782761671","options":["Title"],"media":[{"alt":null,"id":37416065630444,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture.webp?v=1782761671"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture.webp?v=1782761671","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11. You can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in Prusa's \u003ca rel=\"noopener\" href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT!\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface of this sheet should be cleaned only with pure water. Using common agents such as IPA or Acetone will lead to a quick deterioration of the surface. Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eConsumable parts, such as PEI sheets (smooth, textured, nylon, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote that with the Original Prusa XL, the PA Nylon sheet wear is especially noticeable at the Z probing points, where the nozzle leaves visible marks on the surface. This does not affect the surface adhesion and overall printability. You can examine the marks in Prusa's knowledgebase article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA new batch of the PA Nylon sheet will be released during July \/ August 2024. The new version will get a slightly rougher surface texture. This change will not affect the print sheet's functional properties. You can examine the changes in Prusa's knowledge base article as well.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/old_vs_new_texture_sheet_I.avif?v=1782762438\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eOld texture (left) vs new texture (right)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mirror_effect_III.avif?v=1782762480\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eGlossier surface after print removal\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mirror_effect_VI.avif?v=1782762507\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eVisible marks at Z probing points\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat for polyamide-based materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for a glue stick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be cleaned just with water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSuitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be damaged with IPA and acetone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

{"id":9301985788140,"title":"Smooth PEI Print Sheet [CORE One L]","handle":"smooth-pei-print-sheet-core-one-l","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eDouble-sided Smooth PEI spring steel sheet for Prusa CORE One L\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eYou can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" target=\"_blank\" rel=\"noopener\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. Prusa do not consider these dots a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"4\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePerfect for PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat adhesion with almost all materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSmooth bottom of prints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTiny details will stick great\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDo not clean with IPA before PETG — Release agent might be necessary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eYou must apply glue stick when printing Flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-29T15:25:03-04:00","created_at":"2026-06-29T15:25:02-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L","prusa"],"price":10499,"price_min":10499,"price_max":10499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865003770092,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-COL-SMT-PEI-BST","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Smooth PEI Print Sheet [CORE One L]","public_title":null,"options":["Default Title"],"price":10499,"weight":450,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1782760576"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1782760576","options":["Title"],"media":[{"alt":null,"id":37416042430700,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1782760576"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1782760576","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eDouble-sided Smooth PEI spring steel sheet for Prusa CORE One L\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eYou can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" target=\"_blank\" rel=\"noopener\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. Prusa do not consider these dots a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"4\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePerfect for PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat adhesion with almost all materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSmooth bottom of prints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTiny details will stick great\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDo not clean with IPA before PETG — Release agent might be necessary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eYou must apply glue stick when printing Flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

{"id":9301945942252,"title":"Satin Powder-coated Print Sheet [CORE One L]","handle":"prusa-core-one-l-satin-powder-coated-print-sheet","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eDouble-sided satin powder-coated spring steel sheet for Prusa CORE One L\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eIn terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" rel=\"noopener\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in Prusa's \u003ca href=\"https:\/\/help.prusa3d.com\/article\/flexible-steel-sheets-guidepost_2195\" rel=\"noopener\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"5\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSuitable for both PLA and PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLightly textured surface finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for glue stick for PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEasy maintenance and good adhesion qualities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"3\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAcetone causes the surface to quickly deteriorate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-29T13:30:45-04:00","created_at":"2026-06-29T13:30:43-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L"],"price":9899,"price_min":9899,"price_max":9899,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47864772624620,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-COL-STN-BST-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Satin Powder-coated Print Sheet [CORE One L]","public_title":null,"options":["Default Title"],"price":9899,"weight":450,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Satin_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782752912"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Satin_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782752912","options":["Title"],"media":[{"alt":"Prusa CORE One L Satin Powder coated Print Sheet","id":37415860863212,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Satin_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782752912"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Satin_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782752912","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eDouble-sided satin powder-coated spring steel sheet for Prusa CORE One L\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eIn terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" rel=\"noopener\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in Prusa's \u003ca href=\"https:\/\/help.prusa3d.com\/article\/flexible-steel-sheets-guidepost_2195\" rel=\"noopener\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"5\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSuitable for both PLA and PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLightly textured surface finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for glue stick for PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEasy maintenance and good adhesion qualities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"3\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAcetone causes the surface to quickly deteriorate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

{"id":9394300027116,"title":"INDX Conversion Kit [CORE One L\/+]","handle":"indx-conversion-kit-core-one-l","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe INDX is an \u003cstrong\u003eextremely fast, highly efficient toolchanger system\u003c\/strong\u003e with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, \u003cstrong\u003eswitch nozzle sizes in the same print,\u003c\/strong\u003e and \u003cstrong\u003eprint multi-color models without throwing half of the spool to waste.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eThe INDX - A brief overview\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThree numbers that define the INDX\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eUp to 8 Tools\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMBINE COLORS \u0026amp; MATERIALS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor beautiful, colorful prints with virtually zero waste and no color cross-contamination\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOnly ~12 s\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePer Material Swap\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe INDX is the fastest 8-tool solution on the market, bar none\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e~0.013 g\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic waste per one swap\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNo huge pile of plastic poop next to your printer, no massive wipe tower stealing print volume\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat's in the conversion kit\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can pick the 8-Tool kit or a 4-Tool kit (it can be later upgraded to 8 tools). In both cases, you will receive everything you need to install the kit, including a toolset and an easy-to-follow guide. The installation requires you to diassemble a part of your machine, remove the extruder and install the new parts. Users report it takes them about 5-6 hours.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe CORE One L+ with the INDX upgrade installed has a print volume of 298×275×330mm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Innovations that Drive the INDX\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOnly one active component - less complexity, lower price, easier to use.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePrinting with up to 8 materials may seem like a complex job. Here's how Prusa made it so effortless.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh‑Speed Nozzle Swapping in Just 12 Seconds\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSingle-nozzle multi-material systems spend roughly 42 seconds on every single filament swap. They must retract, cut, feed, and flush the hotend, wasting time and plastic on every layer. The INDX toolchanger is much more efficient - requires merely 12s per change.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/1e14b35b01904edd8bd3bac319e3bfbf.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCold in the Dock, Hot in Seconds\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe moving head carries an induction coil which heats the nozzle wirelessly in seconds. It grips a nozzle, brings it to working temperature nearly instantly, and lets it cool again the moment it parks, so it does not ooze.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1a881070-cf2a-4a29-9f2d-2eba6b92581f_c950b398-156c-49d4-b90c-5f22646a0880.avif?v=1787864439\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eActive Head, Passive Toolchangers\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach parked tool is a nozzle and a dock - no electronics. All the intelligence lives in the head that collects them, so adding four more tools is inexpensive - it's four passive nozzle instead of four active toolheads.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/fb1aeb95-3355-481f-b616-aca037f7d655_1e47435d-94c8-4c0a-9737-283031d06873.avif?v=1787864497\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eThe nozzle measures the bed before every print\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe tip presses down on the sheet and a load cell reads the force, so the machine knows exactly where the bed is. This is much more precise than optical solutions, and you can switch nozzles and tools as much as you want without recalibrating the printer every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/be1ccd7d-ce89-4683-82e3-eb8fe318e590.avif?v=1787864551\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAdvanced Nozzle Wiper\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe built-in two-way nozzle wiper is the key to beautiful prints and minimum waste. Every time a new tool is picked up, only a tiny fraction of plastic is extruded to stabilize the pressure in the nozzle. The nozzle is cleaned to prevent any stray blobs from contaminating the print.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/29b2b85d-dcae-45d8-8d7c-61ed776d4f19_17c1eb0a-f6d5-468d-b89b-7f01a751fd7a.avif?v=1787864582\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSelf‑adjusting grip for different materials\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoft materials need a gentler grip than rigid, fiber-filled ones. The INDX features a unique mechanism that adjusts the drive gear tension automatically, so you can move from TPU to rigid engineering filaments without stopping to retune the extruder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/videoframe_1573.png?v=1787864628\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAlways Ready to Print\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLoad eight filaments, install different nozzle sizes from 0.25 to 0.8. When you start a print, everything's already ready and loaded. Just pick the right tool. If you like to use different filaments and nozzles, and hate constantly swapping everything around, the INDX is the solution for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2ec872b6-1fd2-4219-9cf7-e843f0adc713_11817cfb-dec3-4e70-b9b3-87d7056ee4f8.avif?v=1787864655\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAutomatic Tool Offset Calibration\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe state-of-the-art offset calibration system is permanently mounted outside the print area.\u003cbr\u003e\u003cstrong\u003e20x Faster than calibration pin:\u003c\/strong\u003e It takes just 15 seconds per toolhead.\u003cbr\u003e\u003cstrong\u003eImproved Repeatability:\u003c\/strong\u003e Streamlines setup while delivering highly consistent results.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/9273529c-f575-4af4-a456-98e807281c46.avif?v=1787864692\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSystem Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eToolchanger with induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8 on CORE One L+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eColor Change\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAbout 12 seconds, about 0.013 g of waste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm, any brand, no spool chip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Nozzle Sizes\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.25, 0.4, 0.5, 0.6, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStock Nozzles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm High flow, surface hardened nitrocarburized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAccelerometer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEmbedded in INDX head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeating System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTemperature Sensing\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Printer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa CORE One L and L+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtrusion System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDynamic Dual Drive (DX) auto-adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume Impact\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2mm reduction in X-axis, 15 mm reduction in Y-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume With Installed INDX Upgrade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e298 x 275 x 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Materials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH, and other non-abrasive materials - up to 300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrinter Size And Weight With Installed INDX Upgrade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e23.9 kg; 4-Tool: 600×530×770mm (w×d×h) \/ 8-Tool 700×530×770mm. Add extra 70mm depth if you want to install the Advanced Filtration System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWhat's In the Box\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eItem\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa Academy Course - INDX (Digital)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWith the INDX upgrade, you get free access to the 3D Printing and Modeling for Beginners course from Prusa Academy.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e3D Printing Handbook + Online Assembly Guide\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Head\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4 or 8 tools, depending on the kit version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced Nozzle Wiper\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic Parts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFor illustration purposes - actual parts may vary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTop Cover\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSpoolholders\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4 or 8 spoolholders, depending on the kit version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFasteners And Accessories\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFor illustration purposes - actual accessories may vary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHaribo Gummi Bears\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-08-27T14:00:01-04:00","created_at":"2026-08-27T11:07:33-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L\/+"],"price":114900,"price_min":114900,"price_max":154900,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48237018644716,"title":"CORE One L \/ 4 toolheads","option1":"CORE One L","option2":"4 toolheads","option3":null,"sku":"PRU-CKT-INDX-4TL-COL","requires_shipping":true,"taxable":true,"featured_image":{"id":47248929521900,"product_id":9394300027116,"position":2,"created_at":"2026-08-27T11:53:52-04:00","updated_at":"2026-08-27T11:53:54-04:00","alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034","variant_ids":[48237018644716,48237018710252]},"available":false,"name":"INDX Conversion Kit [CORE One L\/+] - CORE One L \/ 4 toolheads","public_title":"CORE One L \/ 4 toolheads","options":["CORE One L","4 toolheads"],"price":118900,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","id":37945959481580,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48237018677484,"title":"CORE One L \/ 8 toolheads","option1":"CORE One L","option2":"8 toolheads","option3":null,"sku":"PRU-CKT-INDX-8TL-COL","requires_shipping":true,"taxable":true,"featured_image":{"id":47248929554668,"product_id":9394300027116,"position":3,"created_at":"2026-08-27T11:53:52-04:00","updated_at":"2026-08-27T11:53:54-04:00","alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034","variant_ids":[48237018677484,48237018743020]},"available":false,"name":"INDX Conversion Kit [CORE One L\/+] - CORE One L \/ 8 toolheads","public_title":"CORE One L \/ 8 toolheads","options":["CORE One L","8 toolheads"],"price":154900,"weight":11000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","id":37945959514348,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48237018710252,"title":"CORE One L Plus \/ 4 toolheads","option1":"CORE One L Plus","option2":"4 toolheads","option3":null,"sku":"PRU-CKT-INDX-4TL-CLP","requires_shipping":true,"taxable":true,"featured_image":{"id":47248929521900,"product_id":9394300027116,"position":2,"created_at":"2026-08-27T11:53:52-04:00","updated_at":"2026-08-27T11:53:54-04:00","alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034","variant_ids":[48237018644716,48237018710252]},"available":false,"name":"INDX Conversion Kit [CORE One L\/+] - CORE One L Plus \/ 4 toolheads","public_title":"CORE One L Plus \/ 4 toolheads","options":["CORE One L Plus","4 toolheads"],"price":114900,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","id":37945959481580,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48237018743020,"title":"CORE One L Plus \/ 8 toolheads","option1":"CORE One L Plus","option2":"8 toolheads","option3":null,"sku":"PRU-CKT-INDX-8TL-CLP","requires_shipping":true,"taxable":true,"featured_image":{"id":47248929554668,"product_id":9394300027116,"position":3,"created_at":"2026-08-27T11:53:52-04:00","updated_at":"2026-08-27T11:53:54-04:00","alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034","variant_ids":[48237018677484,48237018743020]},"available":false,"name":"INDX Conversion Kit [CORE One L\/+] - CORE One L Plus \/ 8 toolheads","public_title":"CORE One L Plus \/ 8 toolheads","options":["CORE One L Plus","8 toolheads"],"price":150900,"weight":11000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","id":37945959514348,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_thumbnail.webp?v=1787845997","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_thumbnail.webp?v=1787845997","options":["Which printer do I have?","Number of INDX printer toolheads"],"media":[{"alt":"INDX Conversion Kit CORE One L\/+ thumbnail","id":37945955975404,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_thumbnail.webp?v=1787845997"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_thumbnail.webp?v=1787845997","width":1400},{"alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","id":37945959481580,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034","width":1400},{"alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","id":37945959514348,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe INDX is an \u003cstrong\u003eextremely fast, highly efficient toolchanger system\u003c\/strong\u003e with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, \u003cstrong\u003eswitch nozzle sizes in the same print,\u003c\/strong\u003e and \u003cstrong\u003eprint multi-color models without throwing half of the spool to waste.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eThe INDX - A brief overview\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThree numbers that define the INDX\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eUp to 8 Tools\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMBINE COLORS \u0026amp; MATERIALS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor beautiful, colorful prints with virtually zero waste and no color cross-contamination\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOnly ~12 s\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePer Material Swap\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe INDX is the fastest 8-tool solution on the market, bar none\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e~0.013 g\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic waste per one swap\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNo huge pile of plastic poop next to your printer, no massive wipe tower stealing print volume\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat's in the conversion kit\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can pick the 8-Tool kit or a 4-Tool kit (it can be later upgraded to 8 tools). In both cases, you will receive everything you need to install the kit, including a toolset and an easy-to-follow guide. The installation requires you to diassemble a part of your machine, remove the extruder and install the new parts. Users report it takes them about 5-6 hours.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe CORE One L+ with the INDX upgrade installed has a print volume of 298×275×330mm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Innovations that Drive the INDX\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOnly one active component - less complexity, lower price, easier to use.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePrinting with up to 8 materials may seem like a complex job. Here's how Prusa made it so effortless.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh‑Speed Nozzle Swapping in Just 12 Seconds\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSingle-nozzle multi-material systems spend roughly 42 seconds on every single filament swap. They must retract, cut, feed, and flush the hotend, wasting time and plastic on every layer. The INDX toolchanger is much more efficient - requires merely 12s per change.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/1e14b35b01904edd8bd3bac319e3bfbf.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCold in the Dock, Hot in Seconds\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe moving head carries an induction coil which heats the nozzle wirelessly in seconds. It grips a nozzle, brings it to working temperature nearly instantly, and lets it cool again the moment it parks, so it does not ooze.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1a881070-cf2a-4a29-9f2d-2eba6b92581f_c950b398-156c-49d4-b90c-5f22646a0880.avif?v=1787864439\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eActive Head, Passive Toolchangers\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach parked tool is a nozzle and a dock - no electronics. All the intelligence lives in the head that collects them, so adding four more tools is inexpensive - it's four passive nozzle instead of four active toolheads.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/fb1aeb95-3355-481f-b616-aca037f7d655_1e47435d-94c8-4c0a-9737-283031d06873.avif?v=1787864497\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eThe nozzle measures the bed before every print\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe tip presses down on the sheet and a load cell reads the force, so the machine knows exactly where the bed is. This is much more precise than optical solutions, and you can switch nozzles and tools as much as you want without recalibrating the printer every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/be1ccd7d-ce89-4683-82e3-eb8fe318e590.avif?v=1787864551\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAdvanced Nozzle Wiper\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe built-in two-way nozzle wiper is the key to beautiful prints and minimum waste. Every time a new tool is picked up, only a tiny fraction of plastic is extruded to stabilize the pressure in the nozzle. The nozzle is cleaned to prevent any stray blobs from contaminating the print.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/29b2b85d-dcae-45d8-8d7c-61ed776d4f19_17c1eb0a-f6d5-468d-b89b-7f01a751fd7a.avif?v=1787864582\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSelf‑adjusting grip for different materials\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoft materials need a gentler grip than rigid, fiber-filled ones. The INDX features a unique mechanism that adjusts the drive gear tension automatically, so you can move from TPU to rigid engineering filaments without stopping to retune the extruder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/videoframe_1573.png?v=1787864628\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAlways Ready to Print\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLoad eight filaments, install different nozzle sizes from 0.25 to 0.8. When you start a print, everything's already ready and loaded. Just pick the right tool. If you like to use different filaments and nozzles, and hate constantly swapping everything around, the INDX is the solution for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2ec872b6-1fd2-4219-9cf7-e843f0adc713_11817cfb-dec3-4e70-b9b3-87d7056ee4f8.avif?v=1787864655\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAutomatic Tool Offset Calibration\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe state-of-the-art offset calibration system is permanently mounted outside the print area.\u003cbr\u003e\u003cstrong\u003e20x Faster than calibration pin:\u003c\/strong\u003e It takes just 15 seconds per toolhead.\u003cbr\u003e\u003cstrong\u003eImproved Repeatability:\u003c\/strong\u003e Streamlines setup while delivering highly consistent results.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/9273529c-f575-4af4-a456-98e807281c46.avif?v=1787864692\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSystem Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eToolchanger with induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8 on CORE One L+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eColor Change\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAbout 12 seconds, about 0.013 g of waste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm, any brand, no spool chip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Nozzle Sizes\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.25, 0.4, 0.5, 0.6, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStock Nozzles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm High flow, surface hardened nitrocarburized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAccelerometer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEmbedded in INDX head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeating System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTemperature Sensing\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Printer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa CORE One L and L+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtrusion System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDynamic Dual Drive (DX) auto-adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume Impact\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2mm reduction in X-axis, 15 mm reduction in Y-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume With Installed INDX Upgrade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e298 x 275 x 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Materials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH, and other non-abrasive materials - up to 300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrinter Size And Weight With Installed INDX Upgrade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e23.9 kg; 4-Tool: 600×530×770mm (w×d×h) \/ 8-Tool 700×530×770mm. Add extra 70mm depth if you want to install the Advanced Filtration System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWhat's In the Box\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eItem\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa Academy Course - INDX (Digital)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWith the INDX upgrade, you get free access to the 3D Printing and Modeling for Beginners course from Prusa Academy.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e3D Printing Handbook + Online Assembly Guide\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Head\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4 or 8 tools, depending on the kit version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced Nozzle Wiper\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic Parts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFor illustration purposes - actual parts may vary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTop Cover\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSpoolholders\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4 or 8 spoolholders, depending on the kit version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFasteners And Accessories\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFor illustration purposes - actual accessories may vary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHaribo Gummi Bears\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}