{"id":3956284031094,"title":"Ultimaker Air Manager for Ultimaker S5","handle":"ultimaker-air-manager-for-ultimaker-s5","description":"\u003cp\u003eSitting atop your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp\u003eThrough Cura and the Ultimaker S5, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\" title=\"Replacement filter for Ultimaker Air Manager\" rel=\"noopener noreferrer\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPA filter\u003c\/li\u003e\n\u003cli\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in) \u003c\/li\u003e\n\u003cli\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 3.6kg\u003c\/li\u003e\n\u003cli\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli\u003eOperating sound : less than 51 dBA (including Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli\u003eCompatible materials : Optimized for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:45:22-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","enclosure","s5","ultimaker"],"price":112500,"price_min":112500,"price_max":112500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505260650614,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-AIR-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Air Manager for Ultimaker S5","public_title":null,"options":["Default Title"],"price":112500,"weight":8100,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1.jpeg?v=1579896338","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2.jpeg?v=1579896338","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3.jpeg?v=1579896345"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1.jpeg?v=1579896338","options":["Title"],"media":[{"alt":null,"id":6013068378230,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1.jpeg?v=1579896332"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1.jpeg?v=1579896332","width":1024},{"alt":null,"id":6013068443766,"position":2,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2.jpeg?v=1579896335"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2.jpeg?v=1579896335","width":1024},{"alt":null,"id":6013068509302,"position":3,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3.jpeg?v=1579896337"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3.jpeg?v=1579896337","width":1024}],"content":"\u003cp\u003eSitting atop your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp\u003eThrough Cura and the Ultimaker S5, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\" title=\"Replacement filter for Ultimaker Air Manager\" rel=\"noopener noreferrer\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPA filter\u003c\/li\u003e\n\u003cli\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in) \u003c\/li\u003e\n\u003cli\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 3.6kg\u003c\/li\u003e\n\u003cli\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli\u003eOperating sound : less than 51 dBA (including Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli\u003eCompatible materials : Optimized for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e"}
Enceinte ventilée Ultimaker S5 Air Manager
Related Products
Station de gestion de matériaux Ultimaker S5
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$4,650.00
{"id":3956271153270,"title":"Material Handling Station for Ultimaker S5","handle":"material-handling-station-for-ultimaker-s5","description":"\u003cp\u003eGet more out of your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e with the Material Station. Load up to six spools of filament in a humidity-controlled, fully enclosed compartment. The station integrates with Cura to enable live spool switching for uninterrupted, hassle-free printing.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy loading : front-facing loading for up to six spools of filament\u003c\/li\u003e\n\u003cli\u003eUninterrupted printing : automatic spool switching when a spool runs out\u003c\/li\u003e\n\u003cli\u003eHumidity control : intelligent atmospheric management and self-regenerating desiccant ensures optimal environmental conditions for your filament\u003c\/li\u003e\n\u003cli\u003eEasy setup and monitoring : NFC material recognition for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, fully integrates with Cura software.\u003c\/li\u003e\n\u003cli\u003eComposite materials compatibility\u003c\/li\u003e\n\u003cli\u003eCompatible with Ultimaker and 3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity : 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type : dual-geared, abrasion resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output : max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration : Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:03:21-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","s5","ultimaker","ultimaker s5"],"price":465000,"price_min":465000,"price_max":465000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505191444598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-MHS-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Material Handling Station for Ultimaker S5","public_title":null,"options":["Default Title"],"price":465000,"weight":20000,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1.jpeg?v=1579896331","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2.jpeg?v=1579896331","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3.jpeg?v=1579896332"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1.jpeg?v=1579896331","options":["Title"],"media":[{"alt":null,"id":6013067133046,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1.jpeg?v=1579896325"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1.jpeg?v=1579896325","width":1024},{"alt":null,"id":6013067395190,"position":2,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2.jpeg?v=1579896328"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2.jpeg?v=1579896328","width":1024},{"alt":null,"id":6013067624566,"position":3,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3.jpeg?v=1579896330"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3.jpeg?v=1579896330","width":1024}],"content":"\u003cp\u003eGet more out of your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e with the Material Station. Load up to six spools of filament in a humidity-controlled, fully enclosed compartment. The station integrates with Cura to enable live spool switching for uninterrupted, hassle-free printing.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy loading : front-facing loading for up to six spools of filament\u003c\/li\u003e\n\u003cli\u003eUninterrupted printing : automatic spool switching when a spool runs out\u003c\/li\u003e\n\u003cli\u003eHumidity control : intelligent atmospheric management and self-regenerating desiccant ensures optimal environmental conditions for your filament\u003c\/li\u003e\n\u003cli\u003eEasy setup and monitoring : NFC material recognition for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, fully integrates with Cura software.\u003c\/li\u003e\n\u003cli\u003eComposite materials compatibility\u003c\/li\u003e\n\u003cli\u003eCompatible with Ultimaker and 3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity : 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type : dual-geared, abrasion resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output : max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration : Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e"}
Station de gestion de matériaux Ultimaker S5
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$4,650.00
Faites encore plus avec votre Ultimaker S5 grâce à la station de gestion de matériaux. Vous pouvez installer jusqu'à 6 bobines de filament dans l'enceinte fermée à humidité contrôlée. La station se synchronise avec Cura et votre imprimante pour permettre de changer de bobine en cours d'impression, pour des impressions longues...
{"id":104650047497,"title":"Ultimaker Print Core 0.25mm","handle":"ultimaker-print-core-0-25mm","description":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers. Use the 0.25mm print core to print finely detailed parts with PLA, ABS, Nylon, CPE, PP, and more!\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.25mm\u003c\/strong\u003e","published_at":"2017-07-18T17:07:23-04:00","created_at":"2017-12-05T11:52:23-05:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":[],"price":16200,"price_min":16200,"price_max":16200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1366071509001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-COR-AAA-285-025","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.25mm","public_title":null,"options":["Default Title"],"price":16200,"weight":800,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-25mm-1.jpeg?v=1539829395"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-25mm-1.jpeg?v=1539829395","options":["Title"],"media":[{"alt":"Ultimaker Parts - Ultimaker Print Core 0.25mm","id":128190972022,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-25mm-1.jpeg?v=1568829318"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-25mm-1.jpeg?v=1568829318","width":1024}],"content":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers. Use the 0.25mm print core to print finely detailed parts with PLA, ABS, Nylon, CPE, PP, and more!\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.25mm\u003c\/strong\u003e"}
Ultimaker Print Core 0.25mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$162.00
A replacement print core for Ultimaker 3 / Ultimaker 3 Extended 3D printers. Use the 0.25mm print core to print finely detailed parts with PLA, ABS, Nylon, CPE, PP, and more! Manufacturer : UltimakerNozzle size : 0.25mm
{"id":10091323593,"title":"Ultimaker Print Core 0.4mm","handle":"ultimaker-print-core-0-4mm","description":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers.\u003c\/p\u003e\n\u003cp\u003eMake sure to select the right core type! The AA print core is optimized for \u003ca href=\"collections\/ultimaker-filaments\" title=\"Ultimaker Filaments\"\u003ebuilding materials\u003c\/a\u003e (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the \u003ca href=\"\/products\/ultimaker-pva-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PVA Filament 2.85mm\" rel=\"noopener noreferrer\"\u003eUltimaker PVA\u003c\/a\u003e support material.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.4mm\u003c\/strong\u003e","published_at":"2017-07-18T17:07:23-04:00","created_at":"2017-07-18T17:07:31-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":[],"price":16200,"price_min":16200,"price_max":16200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40865547529,"title":"AA","option1":"AA","option2":null,"option3":null,"sku":"UMK-COR-AAA-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.4mm - AA","public_title":"AA","options":["AA"],"price":16200,"weight":800,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8718836374524"},{"id":40865547593,"title":"BB","option1":"BB","option2":null,"option3":null,"sku":"UMK-COR-BBB-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.4mm - BB","public_title":"BB","options":["BB"],"price":16200,"weight":800,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8718836374531"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-4mm-1.jpeg?v=1539829254"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-4mm-1.jpeg?v=1539829254","options":["Core type"],"media":[{"alt":"Ultimaker Parts - Ultimaker Print Core 0.4mm","id":79682142326,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-4mm-1.jpeg?v=1568785722"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-4mm-1.jpeg?v=1568785722","width":800}],"content":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers.\u003c\/p\u003e\n\u003cp\u003eMake sure to select the right core type! The AA print core is optimized for \u003ca href=\"collections\/ultimaker-filaments\" title=\"Ultimaker Filaments\"\u003ebuilding materials\u003c\/a\u003e (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the \u003ca href=\"\/products\/ultimaker-pva-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PVA Filament 2.85mm\" rel=\"noopener noreferrer\"\u003eUltimaker PVA\u003c\/a\u003e support material.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.4mm\u003c\/strong\u003e"}
Ultimaker Print Core 0.4mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$162.00
A replacement print core for Ultimaker 3 / Ultimaker 3 Extended 3D printers. Make sure to select the right core type! The AA print core is optimized for building materials (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the Ultimaker PVA support material. Manufacturer : UltimakerNozzle size : 0.4mm
{"id":10098740745,"title":"Ultimaker Print Core 0.8mm","handle":"ultimaker-print-core-0-8mm","description":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers.\u003c\/p\u003e\n\u003cp\u003eMake sure to select the right core type! The AA print core is optimized for \u003ca href=\"collections\/ultimaker-filaments\" title=\"Ultimaker Filaments\"\u003ebuilding materials\u003c\/a\u003e (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the \u003ca href=\"\/products\/ultimaker-pva-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PVA Filament 2.85mm\" rel=\"noopener noreferrer\"\u003eUltimaker PVA\u003c\/a\u003e support material.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.8mm\u003c\/strong\u003e","published_at":"2017-07-18T17:07:23-04:00","created_at":"2017-07-19T15:06:24-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":[],"price":16200,"price_min":16200,"price_max":16200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40932889609,"title":"AA","option1":"AA","option2":null,"option3":null,"sku":"UMK-COR-AAA-285-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.8mm - AA","public_title":"AA","options":["AA"],"price":16200,"weight":800,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":40932889737,"title":"BB","option1":"BB","option2":null,"option3":null,"sku":"UMK-COR-BBB-285-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.8mm - BB","public_title":"BB","options":["BB"],"price":16200,"weight":800,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-8mm-1.jpeg?v=1539829258"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-8mm-1.jpeg?v=1539829258","options":["Core type"],"media":[{"alt":"Ultimaker Parts - Ultimaker Print Core 0.8mm","id":79732736118,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1440,"width":1920,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-8mm-1.jpeg?v=1568785781"},"aspect_ratio":1.333,"height":1440,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-8mm-1.jpeg?v=1568785781","width":1920}],"content":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers.\u003c\/p\u003e\n\u003cp\u003eMake sure to select the right core type! The AA print core is optimized for \u003ca href=\"collections\/ultimaker-filaments\" title=\"Ultimaker Filaments\"\u003ebuilding materials\u003c\/a\u003e (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the \u003ca href=\"\/products\/ultimaker-pva-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PVA Filament 2.85mm\" rel=\"noopener noreferrer\"\u003eUltimaker PVA\u003c\/a\u003e support material.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.8mm\u003c\/strong\u003e"}
Ultimaker Print Core 0.8mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$162.00
A replacement print core for Ultimaker 3 / Ultimaker 3 Extended 3D printers. Make sure to select the right core type! The AA print core is optimized for building materials (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the Ultimaker PVA support material. Manufacturer : UltimakerNozzle size : 0.8mm
{"id":2315062476918,"title":"Ultimaker Print Core CC 0.6mm","handle":"ultimaker-print-core-cc-0-6mm","description":"\u003cp\u003eTo enable hassle-free printing of composite materials, the print core CC red features a 0.6 mm diameter nozzle with a specially customized geometry and a wear-resistant ruby cone to ensure reliable 3D printing with composite materials.\u003cbr\u003e\u003cbr\u003ePlease note: abrasive material printing compatible with the \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 Dual Extruder 3D Printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e \u0026amp; \u003ca href=\"\/products\/ultimaker-s3-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S3 Dual Extruder 3D Printer\" rel=\"noopener noreferrer\"\u003eUltimaker S3\u003c\/a\u003e only.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.6mm\u003c\/strong\u003e","published_at":"2018-11-13T12:48:18-05:00","created_at":"2018-11-06T17:23:56-05:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["2.85mm","engineering","print core","s5","Ultimaker"],"price":41500,"price_min":41500,"price_max":41500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":20883162595446,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-COR-CCC-285-060","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core CC 0.6mm","public_title":null,"options":["Default Title"],"price":41500,"weight":800,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-cc-0-6mm-1.JPG?v=1579896178"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-cc-0-6mm-1.JPG?v=1579896178","options":["Title"],"media":[{"alt":null,"id":6013055598710,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-cc-0-6mm-1.JPG?v=1579896175"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-cc-0-6mm-1.JPG?v=1579896175","width":1024}],"content":"\u003cp\u003eTo enable hassle-free printing of composite materials, the print core CC red features a 0.6 mm diameter nozzle with a specially customized geometry and a wear-resistant ruby cone to ensure reliable 3D printing with composite materials.\u003cbr\u003e\u003cbr\u003ePlease note: abrasive material printing compatible with the \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 Dual Extruder 3D Printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e \u0026amp; \u003ca href=\"\/products\/ultimaker-s3-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S3 Dual Extruder 3D Printer\" rel=\"noopener noreferrer\"\u003eUltimaker S3\u003c\/a\u003e only.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.6mm\u003c\/strong\u003e"}
Ultimaker Print Core CC 0.6mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$415.00
To enable hassle-free printing of composite materials, the print core CC red features a 0.6 mm diameter nozzle with a specially customized geometry and a wear-resistant ruby cone to ensure reliable 3D printing with composite materials.Please note: abrasive material printing compatible with the Ultimaker S5 & Ultimaker S3 only. Manufacturer :...
Ultimaker Cleaning Filament 2.85mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$24.95
{"id":10098732937,"title":"Ultimaker Cleaning Filament 2.85mm","handle":"ultimaker-3-cleaning-filament","description":"\u003cp\u003eKeep your Ultimaker 3 print cores in optimal condition using this cleaning filament. Use it as part of your regular maintenance and to unclog a jammed core. Especially effective for cleaning BB cores.\u003c\/p\u003e\n\u003cp\u003e10 per pack, 20 cm long each.\u003c\/p\u003e\n\u003cp\u003eFull instructions on how to use the cleaning filament can be found at the \u003ca href=\"https:\/\/ultimaker.com\/en\/resources\/49780-ultimaker-3-cleaning-filament\" target=\"_blank\" title=\"Ultimaker 3 Cleaning Filament instructions\" rel=\"noopener noreferrer\"\u003eUltimaker website\u003c\/a\u003e!\u003c\/p\u003e","published_at":"2017-07-19T14:38:12-04:00","created_at":"2017-07-19T15:05:10-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Ultimaker"],"price":2495,"price_min":2495,"price_max":2495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40932816969,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-FIL-CLE-NIN-UM3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Cleaning Filament 2.85mm","public_title":null,"options":["Default Title"],"price":2495,"weight":300,"compare_at_price":null,"inventory_quantity":25,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-3-cleaning-filament-1.jpg?v=1539829256"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-3-cleaning-filament-1.jpg?v=1539829256","options":["Title"],"media":[{"alt":"Ultimaker Parts - Ultimaker 3 Cleaning Filament","id":79732703350,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-3-cleaning-filament-1.jpg?v=1568785781"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-3-cleaning-filament-1.jpg?v=1568785781","width":600}],"content":"\u003cp\u003eKeep your Ultimaker 3 print cores in optimal condition using this cleaning filament. Use it as part of your regular maintenance and to unclog a jammed core. Especially effective for cleaning BB cores.\u003c\/p\u003e\n\u003cp\u003e10 per pack, 20 cm long each.\u003c\/p\u003e\n\u003cp\u003eFull instructions on how to use the cleaning filament can be found at the \u003ca href=\"https:\/\/ultimaker.com\/en\/resources\/49780-ultimaker-3-cleaning-filament\" target=\"_blank\" title=\"Ultimaker 3 Cleaning Filament instructions\" rel=\"noopener noreferrer\"\u003eUltimaker website\u003c\/a\u003e!\u003c\/p\u003e"}
Ultimaker Cleaning Filament 2.85mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$24.95
Keep your Ultimaker 3 print cores in optimal condition using this cleaning filament. Use it as part of your regular maintenance and to unclog a jammed core. Especially effective for cleaning BB cores. 10 per pack, 20 cm long each. Full instructions on how to use the cleaning filament can be found at the Ultimaker website!
Ultimaker Advanced 3D Printing Kit
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
From $119.00
{"id":10334152073,"title":"Ultimaker Advanced 3D Printing Kit","handle":"advanced-3d-printing-kit-for-the-ultimaker-3","description":"\u003cp\u003eFor a smoother experience when printing with engineering materials (\u003ca href=\"\/products\/ultimaker-black-abs-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker ABS Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eABS\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-black-cpe-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker CPE Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eCPE\u003c\/a\u003e \/ \u003ca href=\"\/products\/ultimaker-black-cpe-plus-2-85mm-700g\" target=\"_blank\" title=\"Ultimaker CPE+ Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eCPE+\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-pc-filament-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PC Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePC\u003c\/a\u003e) with your Ultimaker 3D printer, try the advanced 3D printing kit. Includes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Front enclosure\u003c\/li\u003e\n\u003cli\u003e25 Adhesion sheets\u003c\/li\u003e\n\u003cli\u003e1 Adhesive applicator\u003c\/li\u003e\n\u003cli\u003e1 Glass plate\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-08-24T13:38:12-04:00","created_at":"2017-08-24T14:35:21-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["ABS","CPE","PC","Tools","Ultimaker"],"price":11900,"price_min":11900,"price_max":15995,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43958285833,"title":"Ultimaker 3","option1":"Ultimaker 3","option2":null,"option3":null,"sku":"UMK-APK-UM3-REG-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Advanced 3D Printing Kit - Ultimaker 3","public_title":"Ultimaker 3","options":["Ultimaker 3"],"price":15995,"weight":2000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8718836378201"},{"id":45027401737,"title":"Ultimaker 3 Extended","option1":"Ultimaker 3 Extended","option2":null,"option3":null,"sku":"UMK-APK-UM3-EXT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker Advanced 3D Printing Kit - Ultimaker 3 Extended","public_title":"Ultimaker 3 Extended","options":["Ultimaker 3 Extended"],"price":15995,"weight":2000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":45027401801,"title":"Ultimaker 2+","option1":"Ultimaker 2+","option2":null,"option3":null,"sku":"UMK-APK-UM2-REG-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker Advanced 3D Printing Kit - Ultimaker 2+","public_title":"Ultimaker 2+","options":["Ultimaker 2+"],"price":11900,"weight":2000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":45027401865,"title":"Ultimaker 2+ Extended","option1":"Ultimaker 2+ Extended","option2":null,"option3":null,"sku":"UMK-APK-UM2-EXT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker Advanced 3D Printing Kit - Ultimaker 2+ Extended","public_title":"Ultimaker 2+ Extended","options":["Ultimaker 2+ Extended"],"price":11900,"weight":2000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-advanced-3d-printing-kit-1.jpeg?v=1539829303"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-advanced-3d-printing-kit-1.jpeg?v=1539829303","options":["3D Printer"],"media":[{"alt":"Ultimaker Parts - Ultimaker Advanced 3D Printing Kit","id":81804722294,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3192,"width":4256,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-advanced-3d-printing-kit-1.jpeg?v=1568787808"},"aspect_ratio":1.333,"height":3192,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-advanced-3d-printing-kit-1.jpeg?v=1568787808","width":4256}],"content":"\u003cp\u003eFor a smoother experience when printing with engineering materials (\u003ca href=\"\/products\/ultimaker-black-abs-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker ABS Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eABS\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-black-cpe-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker CPE Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eCPE\u003c\/a\u003e \/ \u003ca href=\"\/products\/ultimaker-black-cpe-plus-2-85mm-700g\" target=\"_blank\" title=\"Ultimaker CPE+ Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eCPE+\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-pc-filament-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PC Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePC\u003c\/a\u003e) with your Ultimaker 3D printer, try the advanced 3D printing kit. Includes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Front enclosure\u003c\/li\u003e\n\u003cli\u003e25 Adhesion sheets\u003c\/li\u003e\n\u003cli\u003e1 Adhesive applicator\u003c\/li\u003e\n\u003cli\u003e1 Glass plate\u003c\/li\u003e\n\u003c\/ul\u003e"}
Ultimaker Advanced 3D Printing Kit
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$159.95
For a smoother experience when printing with engineering materials (ABS, CPE / CPE+, PC) with your Ultimaker 3D printer, try the advanced 3D printing kit. Includes : 1 Front enclosure 25 Adhesion sheets 1 Adhesive applicator 1 Glass plate
Feuilles d'adhésion pour lit Ultimaker S5
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$45.00
{"id":2349218857078,"title":"Ultimaker S5 Bed Adhesion Sheets","handle":"ultimaker-s5-bed-adhesion-sheets","description":"\u003cp\u003ePack of 25 self adhesive sheets to use on your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 dual extruder 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e glass build plate for optimal material adhesion. Recommended for engineering materials (CPE, ABS, PC, etc.)\u003c\/p\u003e","published_at":"2017-09-08T15:30:03-04:00","created_at":"2018-11-20T15:15:17-05:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Ultimaker"],"price":4500,"price_min":4500,"price_max":4500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":21162265935990,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-BED-ADH-0S5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S5 Bed Adhesion Sheets","public_title":null,"options":["Default Title"],"price":4500,"weight":1000,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-s5-bed-adhesion-sheets-1.jpeg?v=1579896188"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-s5-bed-adhesion-sheets-1.jpeg?v=1579896188","options":["Title"],"media":[{"alt":null,"id":6013056188534,"position":1,"preview_image":{"aspect_ratio":1.333,"height":999,"width":1332,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-s5-bed-adhesion-sheets-1.jpeg?v=1579896186"},"aspect_ratio":1.333,"height":999,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-s5-bed-adhesion-sheets-1.jpeg?v=1579896186","width":1332}],"content":"\u003cp\u003ePack of 25 self adhesive sheets to use on your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 dual extruder 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e glass build plate for optimal material adhesion. Recommended for engineering materials (CPE, ABS, PC, etc.)\u003c\/p\u003e"}
Feuilles d'adhésion pour lit Ultimaker S5
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$45.00
Paquet de 25 feuilles adhésives autocollantes pour une adhésion optimale au lit chauffant de votre imprimante 3D Ultimaker S5. Recommandé pour l'impression de matériaux d'ingénierie (ABS, PC, CPE, etc.)
Feuilles d'adhésion pour lit Ultimaker
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$34.95
{"id":10403345865,"title":"Ultimaker Bed Adhesion Sheets","handle":"ultimaker-bed-adhesion-sheets","description":"\u003cp\u003ePack of 25 self adhesive sheets to use on your Ultimaker glass build plate for optimal material adhesion. Recommended for engineering materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-09-08T15:30:03-04:00","created_at":"2017-09-08T15:40:16-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Ultimaker"],"price":3495,"price_min":3495,"price_max":3495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45026908553,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-BED-ADH-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Bed Adhesion Sheets","public_title":null,"options":["Default Title"],"price":3495,"weight":1000,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-bed-adhesion-sheets-1.jpeg?v=1539829369"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-bed-adhesion-sheets-1.jpeg?v=1539829369","options":["Title"],"media":[{"alt":"Ultimaker Parts - Ultimaker Bed Adhesion Sheets","id":82272616566,"position":1,"preview_image":{"aspect_ratio":1.333,"height":999,"width":1332,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-bed-adhesion-sheets-1.jpeg?v=1568788579"},"aspect_ratio":1.333,"height":999,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-bed-adhesion-sheets-1.jpeg?v=1568788579","width":1332}],"content":"\u003cp\u003ePack of 25 self adhesive sheets to use on your Ultimaker glass build plate for optimal material adhesion. Recommended for engineering materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Feuilles d'adhésion pour lit Ultimaker
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$34.95
25 feuilles autocollantes à utiliser sur votre vitre d'impression Ultimaker pour obtenir une adhésion idéale. Recommandé pour les matériaux d'ingénierie :CPECPE+PCABSConsultez le guide d'utilisation sur le site d'Ultimaker.com (en anglais).
Bloc chauffant Olsson pour Ultimaker 2 et 2+
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$144.95
{"id":10339348809,"title":"Olsson Block Kit for Ultimaker 2 \u0026 2+","handle":"olsson-block-kit","description":"\u003cp\u003eHeater block upgrade designed by Anders Olsson for the Ultimaker 2 \/ 2+.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExchangeable brass nozzles sizes 0.25, 0.4, 0.6 and 0.8 mm\u003c\/li\u003e\n\u003cli\u003e1 mini screwdriver\u003c\/li\u003e\n\u003cli\u003e1 hex adapter\u003c\/li\u003e\n\u003cli\u003e1 \u003ca href=\"\/products\/olsson-tool-for-nozzle-swapping\" target=\"_blank\" title=\"Olsson Nozzle Tool\" rel=\"noopener noreferrer\"\u003eOlsson nozzle tool\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-08-25T13:55:17-04:00","created_at":"2017-08-25T14:09:59-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["Ultimaker"],"price":14495,"price_min":14495,"price_max":14495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44041323529,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-OLS-BLK-KIT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Olsson Block Kit for Ultimaker 2 \u0026 2+","public_title":null,"options":["Default Title"],"price":14495,"weight":200,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-olsson-block-kit-for-ultimaker-2-2-1.jpeg?v=1539829305"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-olsson-block-kit-for-ultimaker-2-2-1.jpeg?v=1539829305","options":["Title"],"media":[{"alt":"Open Parts - Olsson Block Kit For Ultimaker 2 \u0026 2+","id":81829658742,"position":1,"preview_image":{"aspect_ratio":1.333,"height":300,"width":400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-olsson-block-kit-for-ultimaker-2-2-1.jpeg?v=1568787827"},"aspect_ratio":1.333,"height":300,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-olsson-block-kit-for-ultimaker-2-2-1.jpeg?v=1568787827","width":400}],"content":"\u003cp\u003eHeater block upgrade designed by Anders Olsson for the Ultimaker 2 \/ 2+.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExchangeable brass nozzles sizes 0.25, 0.4, 0.6 and 0.8 mm\u003c\/li\u003e\n\u003cli\u003e1 mini screwdriver\u003c\/li\u003e\n\u003cli\u003e1 hex adapter\u003c\/li\u003e\n\u003cli\u003e1 \u003ca href=\"\/products\/olsson-tool-for-nozzle-swapping\" target=\"_blank\" title=\"Olsson Nozzle Tool\" rel=\"noopener noreferrer\"\u003eOlsson nozzle tool\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}
Bloc chauffant Olsson pour Ultimaker 2 et 2+
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$144.95
Ce kit peut servir pour mettre à jour le bloc chauffant d'une Ultimaker 2 en Ultimaker 2+, ou sert de bloc chauffant de remplacement pour Ultimaker 2+.En plus du bloc chauffant conçu par Anders Olsson, le kit contient :Buses de remplacement de laiton de 0.25, 0.4, 0.6 et 0.8mm1 mini tournevis1 adapteur hexagonal1 outil de changement de buse...
Original Olsson Brass Nozzle 0.25mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$13.50
{"id":10217114249,"title":"Original Olsson Brass Nozzle 0.25mm","handle":"original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.25mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T14:55:21-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538669449,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-025","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.25mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050025"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-25mm-1.jpeg?v=1539829284"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-25mm-1.jpeg?v=1539829284","options":["Title"],"media":[{"alt":"Open Parts - Original Olsson Brass Nozzle 0.25mm","id":80764797046,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-25mm-1.jpeg?v=1568786952"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-25mm-1.jpeg?v=1568786952","width":1024}],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.25mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}
Original Olsson Brass Nozzle 0.25mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$13.50
The original Olsson nozzle, as seen on the Ultimaker 2+ and Ultimaker 2+ Extended. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders. Also available in 0.40mm, 0.60mm, 0.80mm and stainless steel. Specs Material : brass Opening diamet...
Original Olsson Brass Nozzle 0.40mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$13.50
{"id":10217098441,"title":"Original Olsson Brass Nozzle 0.40mm","handle":"original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T14:51:34-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538516745,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.40mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":28,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050032"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-40mm-1.jpeg?v=1539829282"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-40mm-1.jpeg?v=1539829282","options":["Title"],"media":[{"alt":"Open Parts - Original Olsson Brass Nozzle 0.40mm","id":80764764278,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-40mm-1.jpeg?v=1568786952"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-40mm-1.jpeg?v=1568786952","width":1024}],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}
Original Olsson Brass Nozzle 0.40mm
Disponible :
Montréal : En calcul...
Vancouver : En calcul...
$13.50
The original Olsson nozzle, as seen on the Ultimaker 2+ and Ultimaker 2+ Extended. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders. Also available in 0.25mm, 0.60mm, 0.80mm and stainless steel. Specs Material : brass Opening diamet...
