{"id":397267696,"title":"Smooth-On XTC-3D® High Performance Coating","handle":"xtc-3d-high-performance-3d-print-coating","description":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2014-12-23T10:02:00-05:00","created_at":"2014-12-23T10:11:58-05:00","vendor":"Smooth-On","type":"Tools","tags":["tools"],"price":1700,"price_min":1700,"price_max":4800,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1072896796,"title":"6.4 Oz","option1":"6.4 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-064-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smooth-On XTC-3D® High Performance Coating - 6.4 Oz","public_title":"6.4 Oz","options":["6.4 Oz"],"price":1700,"weight":500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696211","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":3620344261,"title":"24 Oz","option1":"24 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-240-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smooth-On XTC-3D® High Performance Coating - 24 Oz","public_title":"24 Oz","options":["24 Oz"],"price":4800,"weight":1000,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696419","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","options":["Size"],"media":[{"alt":null,"id":29008343531756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","width":1400},{"alt":null,"id":29008343892204,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485","width":1400},{"alt":null,"id":29008344613100,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e"}

Smooth-On XTC-3D® High Performance Coating

Previous Product | Next Product

Product Description

Sku: SMO-XTC-COA-064-OOZ

Vendor: Smooth-On

Size

6.4 Oz

24 Oz

$17.00

Maximum quantity available reached.

Tags : tools

Description

* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.) *** -> Hacking t-glase to look more like glass! <- ***

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

Inexpensive to Use: 1 oz covers 100+ square inches.

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC's, phthalates or phosphates.

Related Products

Bambu Lab Hardened Steel Extruder Unit - X1C

IN STOCK: 1

$57.99

{"id":8743043465452,"title":"Bambu Lab Hardened Steel Extruder Unit - X1C","handle":"bambu-lab-hardened-steel-extruder-unit-x1c","description":"\u003cdiv class=\"pct_st-p\" style=\"margin-top: 30px;\" data-mce-style=\"margin-top: 30px;\"\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehardened steel extruder unit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis equipped with double gears made of hardened steel, which provides increased extrusion force, prevents slippage, and enhances abrasion resistance. These gears enable the extruder unit to handle tough engineering filaments such as\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecarbon fiber nylon\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eglass fiber nylon\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn addition, the extruder unit includes a sensor that supports filament break detection, which can help prevent print failures and improve overall printing efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e*Please confirm your printer model before making a purchase, as the connector may differ between the X1 Series version and the P1P version.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eInstallation\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eLearn more about the replacement of hardened steel extruder unit for X1 Series on\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/x1\/maintenance\/replace-extruder\" target=\"_blank\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/x1\/maintenance\/replace-extruder\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eIn the Box\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e- Hardened Steel Extruder Unit - X1 Series\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan\u003eX1 and X1C (not for X1E)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003ch2 class=\"pct_t\" style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eProduct Specifications\u003c\/h2\u003e\n\u003cdiv class=\"pct_t-tb\"\u003e\n\u003ctable class=\"pct_tb\" style=\"width: 491.328px;\" data-mce-style=\"width: 491.328px;\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121px;\" data-mce-style=\"width: 121px;\"\u003e\u003cstrong\u003eReduction Ratio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 76px;\" data-mce-style=\"width: 76px;\"\u003e9 : 53\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 86px;\" data-mce-style=\"width: 86px;\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121.328px;\" data-mce-style=\"width: 121.328px;\"\u003ePlastic, Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121px;\" data-mce-style=\"width: 121px;\"\u003e\u003cstrong\u003eSupported Filament Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 76px;\" data-mce-style=\"width: 76px;\"\u003e1.75 mm\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 86px;\" data-mce-style=\"width: 86px;\"\u003e\u003cb\u003ePackaging Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121.328px;\" data-mce-style=\"width: 121.328px;\"\u003e60*60*30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121px;\" data-mce-style=\"width: 121px;\"\u003e\u003cb\u003eSupported Filaments\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 76px;\" data-mce-style=\"width: 76px;\"\u003ePET-CF, PAHT-CF, PA6-CF, PLA-CF, PETG-CF, PLA, PETG, ABS, ASA, PC, TPU\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 86px;\" data-mce-style=\"width: 86px;\"\u003e\u003cb\u003ePackaging Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121.328px;\" data-mce-style=\"width: 121.328px;\"\u003e50 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-12-12T15:49:18-05:00","created_at":"2024-12-12T15:26:17-05:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["Bambu Lab","Parts","X1C"],"price":5799,"price_min":5799,"price_max":5799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45987919364332,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-X1C-XTR-UNT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bambu Lab Hardened Steel Extruder Unit - X1C","public_title":null,"options":["Default Title"],"price":5799,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6975337034100","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Hardened_Steel_Extruder_Unit-X1C_SKU_FAE017.webp?v=1734035533"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Hardened_Steel_Extruder_Unit-X1C_SKU_FAE017.webp?v=1734035533","options":["Title"],"media":[{"alt":null,"id":34640257253612,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Hardened_Steel_Extruder_Unit-X1C_SKU_FAE017.webp?v=1734035533"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Hardened_Steel_Extruder_Unit-X1C_SKU_FAE017.webp?v=1734035533","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"pct_st-p\" style=\"margin-top: 30px;\" data-mce-style=\"margin-top: 30px;\"\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehardened steel extruder unit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis equipped with double gears made of hardened steel, which provides increased extrusion force, prevents slippage, and enhances abrasion resistance. These gears enable the extruder unit to handle tough engineering filaments such as\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecarbon fiber nylon\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eglass fiber nylon\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn addition, the extruder unit includes a sensor that supports filament break detection, which can help prevent print failures and improve overall printing efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e*Please confirm your printer model before making a purchase, as the connector may differ between the X1 Series version and the P1P version.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eInstallation\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eLearn more about the replacement of hardened steel extruder unit for X1 Series on\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/x1\/maintenance\/replace-extruder\" target=\"_blank\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/x1\/maintenance\/replace-extruder\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eIn the Box\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e- Hardened Steel Extruder Unit - X1 Series\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan\u003eX1 and X1C (not for X1E)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003ch2 class=\"pct_t\" style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eProduct Specifications\u003c\/h2\u003e\n\u003cdiv class=\"pct_t-tb\"\u003e\n\u003ctable class=\"pct_tb\" style=\"width: 491.328px;\" data-mce-style=\"width: 491.328px;\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121px;\" data-mce-style=\"width: 121px;\"\u003e\u003cstrong\u003eReduction Ratio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 76px;\" data-mce-style=\"width: 76px;\"\u003e9 : 53\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 86px;\" data-mce-style=\"width: 86px;\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121.328px;\" data-mce-style=\"width: 121.328px;\"\u003ePlastic, Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121px;\" data-mce-style=\"width: 121px;\"\u003e\u003cstrong\u003eSupported Filament Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 76px;\" data-mce-style=\"width: 76px;\"\u003e1.75 mm\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 86px;\" data-mce-style=\"width: 86px;\"\u003e\u003cb\u003ePackaging Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121.328px;\" data-mce-style=\"width: 121.328px;\"\u003e60*60*30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121px;\" data-mce-style=\"width: 121px;\"\u003e\u003cb\u003eSupported Filaments\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 76px;\" data-mce-style=\"width: 76px;\"\u003ePET-CF, PAHT-CF, PA6-CF, PLA-CF, PETG-CF, PLA, PETG, ABS, ASA, PC, TPU\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 86px;\" data-mce-style=\"width: 86px;\"\u003e\u003cb\u003ePackaging Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"width: 121.328px;\" data-mce-style=\"width: 121.328px;\"\u003e50 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Bambu Lab Hardened Steel Extruder Unit - X1C

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$57.99

The hardened steel extruder unit is equipped with double gears made of hardened steel, which provides increased extrusion force, prevents slippage, and enhances abrasion resistance. These gears enable the extruder unit to handle tough engineering filaments such as carbon fiber nylon and glass fiber nylon. In addition, the extruder unit includes...

Formlabs Form 4L Mixer

IN STOCK: 5

$67.13

{"id":8742372376812,"title":"Formlabs Form 4L Mixer","handle":"formlabs-form-4l-mixer","description":"\u003cp\u003e\u003cspan\u003eThe Form 4L Resin Mixer improves material performance by keeping resin homogenous in the tank during the printing process. A Resin Mixer is required anytime you are printing. Resin Mixers typically last for the lifetime of your printer.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFor convenience, we recommend having one Resin Mixer for each Resin Tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eResin Tank compatibility: Form 4L Resin Tank\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-12-11T21:58:23-05:00","created_at":"2024-12-11T21:52:30-05:00","vendor":"Formlabs","type":"Formlabs Parts","tags":["Form 4L","formlabs","Parts"],"price":6713,"price_min":6713,"price_max":6713,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45984532562156,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-MXR-F4L-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Form 4L Mixer","public_title":null,"options":["Default Title"],"price":6713,"weight":500,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294037272","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_4L_Resin_Tank_Mixer_SKU_MXR-F4L-01_Product_Picture.webp?v=1733972136"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_4L_Resin_Tank_Mixer_SKU_MXR-F4L-01_Product_Picture.webp?v=1733972136","options":["Title"],"media":[{"alt":null,"id":34635338219756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_4L_Resin_Tank_Mixer_SKU_MXR-F4L-01_Product_Picture.webp?v=1733972136"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_4L_Resin_Tank_Mixer_SKU_MXR-F4L-01_Product_Picture.webp?v=1733972136","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe Form 4L Resin Mixer improves material performance by keeping resin homogenous in the tank during the printing process. A Resin Mixer is required anytime you are printing. Resin Mixers typically last for the lifetime of your printer.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFor convenience, we recommend having one Resin Mixer for each Resin Tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eResin Tank compatibility: Form 4L Resin Tank\u003c\/span\u003e\u003c\/p\u003e"}

Formlabs Form 4L Mixer

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$67.13

The Form 4L Resin Mixer improves material performance by keeping resin homogenous in the tank during the printing process. A Resin Mixer is required anytime you are printing. Resin Mixers typically last for the lifetime of your printer.For convenience, we recommend having one Resin Mixer for each Resin Tank. Resin Tank compatibility: Form 4L Res...

Formlabs Form 4L Resin Tank

IN STOCK: 5

$341.13

{"id":8742366707948,"title":"Formlabs Form 4L Resin Tank","handle":"formlabs-form-4l-resin-tank","description":"\u003cp\u003eLow Force Display™ (LFD) 3D printing uses a flexible yet strong dual-layer film tank for consistent, high quality prints. Every resin tank includes a reusable lid, making it easy to stack tanks and store resin outside of the machine. With a separate tank for each individual resin color or type, switching materials is as easy as sliding in a new tank.\u003c\/p\u003e\n\u003cp\u003eResin Tanks are built to last and deliver consistent performance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrinter compatibility: Form 4L, Form 4BL\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-12-11T21:51:58-05:00","created_at":"2024-12-11T21:42:31-05:00","vendor":"Formlabs","type":"Formlabs Parts","tags":["Form 4L","formlabs","Parts"],"price":34113,"price_min":34113,"price_max":34113,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45984491471084,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-TNK-F4L-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Form 4L Resin Tank","public_title":null,"options":["Default Title"],"price":34113,"weight":3300,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294037265","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_4L_Resin_Tank_SKU_RT-F4L-01_Product_Picture.webp?v=1733971736"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_4L_Resin_Tank_SKU_RT-F4L-01_Product_Picture.webp?v=1733971736","options":["Title"],"media":[{"alt":null,"id":34635292999916,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_4L_Resin_Tank_SKU_RT-F4L-01_Product_Picture.webp?v=1733971736"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_4L_Resin_Tank_SKU_RT-F4L-01_Product_Picture.webp?v=1733971736","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eLow Force Display™ (LFD) 3D printing uses a flexible yet strong dual-layer film tank for consistent, high quality prints. Every resin tank includes a reusable lid, making it easy to stack tanks and store resin outside of the machine. With a separate tank for each individual resin color or type, switching materials is as easy as sliding in a new tank.\u003c\/p\u003e\n\u003cp\u003eResin Tanks are built to last and deliver consistent performance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrinter compatibility: Form 4L, Form 4BL\u003c\/span\u003e\u003c\/p\u003e"}

Formlabs Form 4L Resin Tank

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$341.13

Low Force Display™ (LFD) 3D printing uses a flexible yet strong dual-layer film tank for consistent, high quality prints. Every resin tank includes a reusable lid, making it easy to stack tanks and store resin outside of the machine. With a separate tank for each individual resin color or type, switching materials is as easy as sliding in a new ...

Fuse Parts Carrier

IN STOCK: 4

$67.13

{"id":8742351470828,"title":"Fuse Parts Carrier","handle":"fuse-parts-carrier","description":"\u003cp\u003e\u003cspan\u003eThe Fuse Parts Carrier is a container designed for powder-free part collection when used with the Fuse Sift. Simply slide it into the build chamber enclosure after part extraction to seamlessly transfer parts without opening the glovebox to maintain an enclosed environment and clean workstation.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-12-11T21:30:46-05:00","created_at":"2024-12-11T21:21:42-05:00","vendor":"Formlabs","type":"Formlabs SLS parts","tags":["formlabs","Parts","SLS"],"price":6713,"price_min":6713,"price_max":6713,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45984352927980,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-SLS-PRT-CRR-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fuse Parts Carrier","public_title":null,"options":["Default Title"],"price":6713,"weight":2000,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294036565","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Fuse_Parts_Carrier_SPC-FS1-01_Product_Picture.webp?v=1733970373"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Fuse_Parts_Carrier_SPC-FS1-01_Product_Picture.webp?v=1733970373","options":["Title"],"media":[{"alt":null,"id":34635025809644,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Fuse_Parts_Carrier_SPC-FS1-01_Product_Picture.webp?v=1733970373"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Fuse_Parts_Carrier_SPC-FS1-01_Product_Picture.webp?v=1733970373","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe Fuse Parts Carrier is a container designed for powder-free part collection when used with the Fuse Sift. Simply slide it into the build chamber enclosure after part extraction to seamlessly transfer parts without opening the glovebox to maintain an enclosed environment and clean workstation.\u003c\/span\u003e\u003c\/p\u003e"}

Fuse Parts Carrier

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$67.13

The Fuse Parts Carrier is a container designed for powder-free part collection when used with the Fuse Sift. Simply slide it into the build chamber enclosure after part extraction to seamlessly transfer parts without opening the glovebox to maintain an enclosed environment and clean workstation.

Upper Laser Window (Fuse 1 & Fuse 1+)

IN STOCK: 1

$115.08

{"id":8742343180524,"title":"Upper Laser Window (Fuse 1 \u0026 Fuse 1+)","handle":"upper-laser-window-fuse-1-fuse-1","description":"\u003cp\u003e\u003cspan\u003eFuse 1 \u0026amp; Fuse 1+ Upper Laser Window\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 class=\"Accordion_title__Yf8G7\"\u003eCompatibility\u003c\/h5\u003e\n\u003cdiv class=\"Accordion_body__Bbs1D\"\u003e\n\u003cp\u003ePrinter compatibility: Fuse 1, Fuse 1+ 30W\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2024-12-11T21:19:07-05:00","created_at":"2024-12-11T21:09:38-05:00","vendor":"Formlabs","type":"Formlabs SLS parts","tags":["formlabs","Parts","SLS"],"price":11508,"price_min":11508,"price_max":11508,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45984287654124,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-SLS-UPR-LSR-WND","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Upper Laser Window (Fuse 1 \u0026 Fuse 1+)","public_title":null,"options":["Default Title"],"price":11508,"weight":400,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294032451","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Logo_For_Fuse_1_Upper_Laser_Window_Product_Picture.webp?v=1733969708"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Logo_For_Fuse_1_Upper_Laser_Window_Product_Picture.webp?v=1733969708","options":["Title"],"media":[{"alt":null,"id":34634948018412,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Logo_For_Fuse_1_Upper_Laser_Window_Product_Picture.webp?v=1733969708"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Logo_For_Fuse_1_Upper_Laser_Window_Product_Picture.webp?v=1733969708","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFuse 1 \u0026amp; Fuse 1+ Upper Laser Window\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 class=\"Accordion_title__Yf8G7\"\u003eCompatibility\u003c\/h5\u003e\n\u003cdiv class=\"Accordion_body__Bbs1D\"\u003e\n\u003cp\u003ePrinter compatibility: Fuse 1, Fuse 1+ 30W\u003c\/p\u003e\n\u003c\/div\u003e"}

Upper Laser Window (Fuse 1 & Fuse 1+)

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$115.08

Fuse 1 & Fuse 1+ Upper Laser Window Compatibility Printer compatibility: Fuse 1, Fuse 1+ 30W

Formlabs Nylon 12 Powder 10Kg

IN STOCK: 4

$1,368.63

{"id":8742322012396,"title":"Formlabs Nylon 12 Powder 10Kg","handle":"formlabs-nylon-12-powder-10kg","description":"\u003cp\u003e\u003cspan\u003eBalancing strength and detail, Nylon 12 Powder is a highly capable material for both functional prototyping and end-use production of complex assemblies and durable parts with high environmental stability. Our Nylon 12 Powder is specifically developed for use on the Fuse 1.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__qRPu1 Header_as-h5__8QC9o Header_weight-700__AniPs Header_light__eMDdl Header_black__eSI91\"\u003eWhy Choose Nylon 12 Powder\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_light__HiOH1 TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003eWith high tensile strength and environmental stability, Nylon 12 Powder is suitable for creating complex assemblies and durable parts with minimal water absorption.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-padding-x__zlZjS Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eVersatile Prototyping\u003c\/strong\u003e\u003cbr\u003eNylon 12 Powder is a highly capable thermoplastic for a range of functional prototypes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eDimensional Accuracy\u003c\/strong\u003e\u003cbr\u003ePrint highly detailed parts and complex assemblies with low creep.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-padding-x__zlZjS Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eEconomical Refresh Rate\u003c\/strong\u003e\u003cbr\u003eGet the most out of your material by printing with up to 70% recycled powder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_align-self-middle__7EFZt light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eEnvironmental Stability\u003c\/strong\u003e\u003cbr\u003eNylon 12 Powder prints absorb very little moisture and are resistant to light, heat, and chemicals.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__qRPu1 Header_as-h5__8QC9o Header_weight-700__AniPs Header_black__eSI91\"\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003eUse Nylon 12 Powder for both functional prototyping and end-use production of complex assemblies and durable parts with high environmental stability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-12__sNNzE Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__7gb8X\"\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eHigh performance prototyping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eSmall batch manufacturing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003ePermanent jigs, fixtures, and tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eBiocompatible, sterilizable parts*\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-12__sNNzE Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003e\u003csub\u003e\u003cspan\u003e* Material properties may vary based on part design and manufacturing practices. It is the manufacturer’s responsibility to validate the suitability of the printed parts for the intended use.\u003cbr\u003e\u003c\/span\u003e\u003c\/sub\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eFuse 1, Fuse 1+\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eData sheets\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Download Nylon 12 Powder Technical Data Sheet\" href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2001447-TDS-ENUS-0.pdf\" data-mce-href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2001447-TDS-ENUS-0.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan class=\"AlignmentWrapper_content__Aq_1_ AlignmentWrapper_card__P4j_C AlignmentWrapper_cardLayout__XWD_E\"\u003e\u003cspan class=\"Button_content__WwYqe\"\u003eDownload Nylon 12 Powder Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2001461-SDS-ENUS-0.pdf\" title=\"Download Nylon 12 Powder Safety Data Sheet\" rel=\"noopener noreferrer\" data-mce-href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2001461-SDS-ENUS-0.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan class=\"AlignmentWrapper_content__Aq_1_ AlignmentWrapper_card__P4j_C AlignmentWrapper_cardLayout__XWD_E\"\u003e\u003cspan class=\"Button_content__WwYqe\"\u003eDownload Nylon 12 Powder Safety Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2024-12-11T21:01:54-05:00","created_at":"2024-12-11T20:51:55-05:00","vendor":"Formlabs","type":"Formlabs SLS Powders","tags":["formlabs","Powder","SLS"],"price":136863,"price_min":136863,"price_max":136863,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45983702778092,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-SLS-PWD-N12-10K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Nylon 12 Powder 10Kg","public_title":null,"options":["Default Title"],"price":136863,"weight":10500,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294036695","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Nylon_12_SLS_Powder_10Kg_Bag_Product_Picture.webp?v=1733968696"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Nylon_12_SLS_Powder_10Kg_Bag_Product_Picture.webp?v=1733968696","options":["Title"],"media":[{"alt":null,"id":34634690461932,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Nylon_12_SLS_Powder_10Kg_Bag_Product_Picture.webp?v=1733968696"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Nylon_12_SLS_Powder_10Kg_Bag_Product_Picture.webp?v=1733968696","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eBalancing strength and detail, Nylon 12 Powder is a highly capable material for both functional prototyping and end-use production of complex assemblies and durable parts with high environmental stability. Our Nylon 12 Powder is specifically developed for use on the Fuse 1.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__qRPu1 Header_as-h5__8QC9o Header_weight-700__AniPs Header_light__eMDdl Header_black__eSI91\"\u003eWhy Choose Nylon 12 Powder\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_light__HiOH1 TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003eWith high tensile strength and environmental stability, Nylon 12 Powder is suitable for creating complex assemblies and durable parts with minimal water absorption.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-padding-x__zlZjS Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eVersatile Prototyping\u003c\/strong\u003e\u003cbr\u003eNylon 12 Powder is a highly capable thermoplastic for a range of functional prototypes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eDimensional Accuracy\u003c\/strong\u003e\u003cbr\u003ePrint highly detailed parts and complex assemblies with low creep.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_grid-padding-x__zlZjS Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eEconomical Refresh Rate\u003c\/strong\u003e\u003cbr\u003eGet the most out of your material by printing with up to 70% recycled powder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_align-self-middle__7EFZt light Grid_small-24__eNIm2 Grid_medium-24__a5NQ4 Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cp class=\"SimpleCallout_callout-text__SqU5d\"\u003e\u003cstrong class=\"SimpleCallout_title__KU3B8\"\u003eEnvironmental Stability\u003c\/strong\u003e\u003cbr\u003eNylon 12 Powder prints absorb very little moisture and are resistant to light, heat, and chemicals.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__qRPu1 Header_as-h5__8QC9o Header_weight-700__AniPs Header_black__eSI91\"\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003eUse Nylon 12 Powder for both functional prototyping and end-use production of complex assemblies and durable parts with high environmental stability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__jcOph Grid_stretch__xyssA\"\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-12__sNNzE Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__7gb8X\"\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__7ZY9W CheckmarkList_margin-vertical-2__s7QcK CheckmarkList_item__fTCOX CheckmarkList_font-size-0__xJ_u2\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eHigh performance prototyping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eSmall batch manufacturing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003ePermanent jigs, fixtures, and tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"CheckmarkList_single-line__IS_I_\"\u003eBiocompatible, sterilizable parts*\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__7mNUx Icon_icon__qbeSm\"\u003e\u003c\/i\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__TVgMH Grid_small-24__eNIm2 Grid_medium-12__sNNzE Grid_large-12__4ePne Grid_small-offset-0__Q1Roi Grid_medium-offset-0__itTru Grid_large-offset-0__yalGQ\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__u4_Uw TextPlugin_theme__sG0yW\"\u003e\n\u003cp\u003e\u003csub\u003e\u003cspan\u003e* Material properties may vary based on part design and manufacturing practices. It is the manufacturer’s responsibility to validate the suitability of the printed parts for the intended use.\u003cbr\u003e\u003c\/span\u003e\u003c\/sub\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eFuse 1, Fuse 1+\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eData sheets\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Download Nylon 12 Powder Technical Data Sheet\" href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2001447-TDS-ENUS-0.pdf\" data-mce-href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2001447-TDS-ENUS-0.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan class=\"AlignmentWrapper_content__Aq_1_ AlignmentWrapper_card__P4j_C AlignmentWrapper_cardLayout__XWD_E\"\u003e\u003cspan class=\"Button_content__WwYqe\"\u003eDownload Nylon 12 Powder Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2001461-SDS-ENUS-0.pdf\" title=\"Download Nylon 12 Powder Safety Data Sheet\" rel=\"noopener noreferrer\" data-mce-href=\"https:\/\/formlabs-media.formlabs.com\/datasheets\/2001461-SDS-ENUS-0.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan class=\"AlignmentWrapper_content__Aq_1_ AlignmentWrapper_card__P4j_C AlignmentWrapper_cardLayout__XWD_E\"\u003e\u003cspan class=\"Button_content__WwYqe\"\u003eDownload Nylon 12 Powder Safety Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}

Formlabs Nylon 12 Powder 10Kg

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$1,368.63

Balancing strength and detail, Nylon 12 Powder is a highly capable material for both functional prototyping and end-use production of complex assemblies and durable parts with high environmental stability. Our Nylon 12 Powder is specifically developed for use on the Fuse 1. Why Choose Nylon 12 Powder With high tensile strength and environmental...

BioMed White Resin (Form 4B) 1L

IN STOCK: 5

$382.23

{"id":8742270140652,"title":"BioMed White Resin (Form 4B) 1L","handle":"biomed-white-resin-form-4-1l","description":"\u003cp\u003e\u003cspan\u003eBioMed White Resin is a rigid material for biocompatible applications requiring long-term skin (\u0026gt;30 days) or short-term bone, tissue, dentin, and mucosal membrane contact (\u0026lt;24 hours).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eParts printed with BioMed White Resin are compatible with common solvent disinfection and sterilization methods.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBioMed White Resin is manufactured in our FDA-registered, ISO 13485 certified facility and is also USP Class VI certified which makes it suitable for pharmaceutical and drug delivery applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eForm 4(B)L print settings are in progress, view the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Form-4L-generation-print-settings-roadmap\"\u003esettings roadmap\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto see when settings for this material will be available on the Form 4(B)L.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_black__nDqD6\"\u003eWhy Choose BioMed White Resin?\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_light__fRWzv Header_grey__pVdrk\"\u003eFuel medical innovation using 3D printing and BioMed White Resin for producing end-use devices where performance and biocompatibility are critical.\u003c\/h4\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-stethoscope Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eMedical-Grade Material\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eLeverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-high_detail Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eGood Definition\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eProduce parts and assemblies with complex designs and geometries.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-high_contrast Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eHigh Contrast\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eCreate contrast between substances or surfaces to aid in visualization with a white, opaque material.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-soap_bubbles_cleaning Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eBiocompatible and Sterilizable Parts\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eTesting conducted by Formlabs for common use cases is intended to instill confidence that this material is suitable for biocompatible applications.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_black__nDqD6\"\u003eApplications\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_grey__pVdrk\"\u003eUse BioMed White Resin for producing rigid, opaque parts for point-of-care and medical manufacturing applications requiring biocompatibility.\u003c\/h4\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e\u003cstrong\u003eConsider BioMed White Resin for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs Grid_small-24__YV7NB Grid_medium-12__Lt5EN Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__YgcKN\"\u003e\n\u003cul\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eEnd-use medical devices and device components\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eCutting and drilling guides\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eAnatomical models\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003ePatient-specific implant sizing models and molds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eBiocompatible Molds, Jigs + Fixtures\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eSurgical tools and templates\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs Grid_small-24__YV7NB Grid_medium-12__Lt5EN Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e\u003csub\u003e*Unlike Formlabs Dental Resins, no intended uses are provided for BioMed Resins. Material properties may vary based on part design, manufacturing practices and other methods. It is the manufacturer’s responsibility and its respective customers and end-users to determine the biocompatibility and performance of all printed parts for their respective application and use. To instill confidence in potential users, Formlabs has tested biocompatibility and sterilization compatibility for common use cases and manufactures BioMed Resins in an ISO 13485 certified facility. We can offer representative examples of what customers have done with our products and the supporting documentation we make freely available. \u003c\/sub\u003e\u003c\/p\u003e\n\u003cdiv id=\"material-headline\" class=\"Grid_section__NbaNC light\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q light\"\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-margin-x__MQ6jY Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-8__l_c_L Grid_large-8__3LN_a Grid_small-offset-0__RgpwR Grid_medium-offset-8__6cv87 Grid_large-offset-8__As2G7\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"CombinedHeadlines_removeMarginChildren__POo4I\"\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_black__nDqD6\"\u003eMaterial Properties\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"material-properties\" class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\"\u003e\n\u003cdiv class=\"ComparisonTable_comparison-table__Oz3pO ComparisonTable_columns-1__3mh79\"\u003e\n\u003cdiv class=\"ComparisonTable_table-column__e5YQa ComparisonTable_col-1__1GCYC ComparisonTable_light__rcwd2\"\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_row-1__dscBS ComparisonTable_drop-down__dJqor\"\u003e\n\u003cp class=\"ComparisonTable_column-title__4cbif\"\u003eBioMed White Resin\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_first__TXWNG ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eUltimate Tensile Strength: 45.78 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eTensile Modulus: 2020.16 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eElongation: 10%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Strength: 74.46 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Modulus: 2020.16 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHardness Shore D: 80 D\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eNotched Izod: 15.11 J\/m\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHeat Deflection Temp @ 0.45 MPa: 67 ºC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-12-11T19:46:32-05:00","created_at":"2024-12-11T19:35:15-05:00","vendor":"Formlabs","type":"Formlabs Resins","tags":["Form 4","formlabs","resin"],"price":38223,"price_min":38223,"price_max":38223,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45983453642988,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-BMW-0F4-01L-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BioMed White Resin (Form 4B) 1L","public_title":null,"options":["Default Title"],"price":38223,"weight":1500,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294034943","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Biomed_White_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733964033"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Biomed_White_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733964033","options":["Title"],"media":[{"alt":null,"id":34634085794028,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Biomed_White_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733964033"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Biomed_White_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733964033","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eBioMed White Resin is a rigid material for biocompatible applications requiring long-term skin (\u0026gt;30 days) or short-term bone, tissue, dentin, and mucosal membrane contact (\u0026lt;24 hours).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eParts printed with BioMed White Resin are compatible with common solvent disinfection and sterilization methods.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBioMed White Resin is manufactured in our FDA-registered, ISO 13485 certified facility and is also USP Class VI certified which makes it suitable for pharmaceutical and drug delivery applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eForm 4(B)L print settings are in progress, view the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Form-4L-generation-print-settings-roadmap\"\u003esettings roadmap\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto see when settings for this material will be available on the Form 4(B)L.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_black__nDqD6\"\u003eWhy Choose BioMed White Resin?\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_light__fRWzv Header_grey__pVdrk\"\u003eFuel medical innovation using 3D printing and BioMed White Resin for producing end-use devices where performance and biocompatibility are critical.\u003c\/h4\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-stethoscope Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eMedical-Grade Material\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eLeverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-high_detail Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eGood Definition\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eProduce parts and assemblies with complex designs and geometries.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-high_contrast Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eHigh Contrast\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eCreate contrast between substances or surfaces to aid in visualization with a white, opaque material.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-soap_bubbles_cleaning Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eBiocompatible and Sterilizable Parts\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eTesting conducted by Formlabs for common use cases is intended to instill confidence that this material is suitable for biocompatible applications.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_black__nDqD6\"\u003eApplications\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_grey__pVdrk\"\u003eUse BioMed White Resin for producing rigid, opaque parts for point-of-care and medical manufacturing applications requiring biocompatibility.\u003c\/h4\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e\u003cstrong\u003eConsider BioMed White Resin for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs Grid_small-24__YV7NB Grid_medium-12__Lt5EN Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__YgcKN\"\u003e\n\u003cul\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eEnd-use medical devices and device components\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eCutting and drilling guides\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eAnatomical models\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003ePatient-specific implant sizing models and molds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eBiocompatible Molds, Jigs + Fixtures\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eSurgical tools and templates\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs Grid_small-24__YV7NB Grid_medium-12__Lt5EN Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e\u003csub\u003e*Unlike Formlabs Dental Resins, no intended uses are provided for BioMed Resins. Material properties may vary based on part design, manufacturing practices and other methods. It is the manufacturer’s responsibility and its respective customers and end-users to determine the biocompatibility and performance of all printed parts for their respective application and use. To instill confidence in potential users, Formlabs has tested biocompatibility and sterilization compatibility for common use cases and manufactures BioMed Resins in an ISO 13485 certified facility. We can offer representative examples of what customers have done with our products and the supporting documentation we make freely available. \u003c\/sub\u003e\u003c\/p\u003e\n\u003cdiv id=\"material-headline\" class=\"Grid_section__NbaNC light\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q light\"\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-margin-x__MQ6jY Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-8__l_c_L Grid_large-8__3LN_a Grid_small-offset-0__RgpwR Grid_medium-offset-8__6cv87 Grid_large-offset-8__As2G7\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"CombinedHeadlines_removeMarginChildren__POo4I\"\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_black__nDqD6\"\u003eMaterial Properties\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"material-properties\" class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\"\u003e\n\u003cdiv class=\"ComparisonTable_comparison-table__Oz3pO ComparisonTable_columns-1__3mh79\"\u003e\n\u003cdiv class=\"ComparisonTable_table-column__e5YQa ComparisonTable_col-1__1GCYC ComparisonTable_light__rcwd2\"\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_row-1__dscBS ComparisonTable_drop-down__dJqor\"\u003e\n\u003cp class=\"ComparisonTable_column-title__4cbif\"\u003eBioMed White Resin\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_first__TXWNG ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eUltimate Tensile Strength: 45.78 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eTensile Modulus: 2020.16 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eElongation: 10%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Strength: 74.46 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Modulus: 2020.16 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHardness Shore D: 80 D\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eNotched Izod: 15.11 J\/m\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHeat Deflection Temp @ 0.45 MPa: 67 ºC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

BioMed White Resin (Form 4B) 1L

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$382.23

BioMed White Resin is a rigid material for biocompatible applications requiring long-term skin (>30 days) or short-term bone, tissue, dentin, and mucosal membrane contact (<24 hours).Parts printed with BioMed White Resin are compatible with common solvent disinfection and sterilization methods.BioMed White Resin is manufactured in our FDA-...

BioMed Clear Resin (Form 4B) 1L

IN STOCK: 5

$478.13

{"id":8742250873068,"title":"BioMed Clear Resin (Form 4B) 1L","handle":"biomed-clear-resin-form-4-1-l","description":"\u003cp\u003e\u003cspan\u003eBioMed Clear Resin is a transparent, hard, strong, and wear-resistant material for biocompatible applications requiring long-term skin (\u0026gt;30 days), breathing gas pathways, and mucosal membrane contact (\u0026gt;30 hours) or short-term bone, tissue, and dentin (\u0026lt;24 hours). This USP Class VI certified material is suitable for pharmaceutical and drug delivery applications and uses that require wear resistance and low water absorption over time.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eParts printed with BioMed Clear Resin are compatible with common sterilization methods.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBioMed Clear Resin is manufactured in our FDA-registered, ISO 13485 certified facility and is supported with an FDA Device Master File.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_black__nDqD6\"\u003eWhy Choose BioMed Clear Resin?\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_light__fRWzv Header_grey__pVdrk\"\u003eFuel medical innovation using 3D printing and BioMed Clear Resin for producing end-use devices where performance and biocompatibility are critical.\u003c\/h4\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-stethoscope Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eMedical-Grade Material\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eLeverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485.\u003ci class=\"fl-v2 fl-v2-fl-soap_bubbles_cleaning Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eBiocompatible and Sterilizable Parts\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eTesting conducted by Formlabs for common use cases is intended to instill confidence that this material is suitable for biocompatible applications.\u003ci class=\"fl-v2 fl-v2-fl-shapes_circle_square Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eTransparent\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eVisibility through parts allows light to pass through.\u003ci class=\"fl-v2 fl-v2-fl-high_detail Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eExcellent Definition\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eProduce parts and assemblies with complex designs and geometries.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_black__nDqD6\"\u003eApplications\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_grey__pVdrk\"\u003eUse BioMed Clear Resin for producing rigid, transparent parts for point-of-care and medical manufacturing applications requiring biocompatibility.\u003c\/h4\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e\u003cstrong\u003eConsider BioMed Clear Resin for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs Grid_small-24__YV7NB Grid_medium-12__Lt5EN Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__YgcKN\"\u003e\n\u003cul\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eEnd-use devices\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eBiocompatible prototypes, molds, jigs + fixtures\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eModels for visualization and implant sizing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eGas pathway connectors, adapters + devices\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs Grid_small-24__YV7NB Grid_medium-12__Lt5EN Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e\u003csub\u003e*Unlike Formlabs Dental Resins, no intended uses are provided for BioMed Resins. Material properties may vary based on part design, manufacturing practices and other methods. It is the manufacturer’s responsibility and its respective customers and end-users to determine the biocompatibility and performance of all printed parts for their respective application and use. To instill confidence in potential users, Formlabs has tested biocompatibility and sterilization compatibility for common use cases and manufactures BioMed Resins in an ISO 13485 certified facility. We can offer representative examples of what customers have done with our products and the supporting documentation we make freely available.\u003c\/sub\u003e\u003c\/p\u003e\n\u003cdiv class=\"Grid_section__NbaNC light\" id=\"material-headline\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q light\"\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-margin-x__MQ6jY Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-8__l_c_L Grid_large-8__3LN_a Grid_small-offset-0__RgpwR Grid_medium-offset-8__6cv87 Grid_large-offset-8__As2G7\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"CombinedHeadlines_removeMarginChildren__POo4I\"\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_black__nDqD6\"\u003eMaterial Properties\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\" id=\"material-properties\"\u003e\n\u003cdiv class=\"ComparisonTable_comparison-table__Oz3pO ComparisonTable_columns-1__3mh79\"\u003e\n\u003cdiv class=\"ComparisonTable_table-column__e5YQa ComparisonTable_col-1__1GCYC ComparisonTable_light__rcwd2\"\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_row-1__dscBS ComparisonTable_drop-down__dJqor\"\u003e\n\u003cp class=\"ComparisonTable_column-title__4cbif\"\u003eBioMed Clear Resin\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_first__TXWNG ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eUltimate Tensile Strength: 52 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eYoung’s Modulus: 2080 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eElongation: 12%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Strength: 84 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Modulus: 2300 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHardness Shore D: 78 D\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eNotched Izod: 35 J\/m\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHeat Deflection Temp @ 0.45 MPa: 67 ºC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-12-11T19:15:41-05:00","created_at":"2024-12-11T19:06:46-05:00","vendor":"Formlabs","type":"Formlabs Resins","tags":["Form 4","formlabs","resin"],"price":47813,"price_min":47813,"price_max":47813,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45983406391532,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-BMC-0F4-01L-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BioMed Clear Resin (Form 4B) 1L","public_title":null,"options":["Default Title"],"price":47813,"weight":1500,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294034936","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Biomed_Clear_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733963417"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Biomed_Clear_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733963417","options":["Title"],"media":[{"alt":null,"id":34634004791532,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Biomed_Clear_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733963417"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Biomed_Clear_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733963417","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eBioMed Clear Resin is a transparent, hard, strong, and wear-resistant material for biocompatible applications requiring long-term skin (\u0026gt;30 days), breathing gas pathways, and mucosal membrane contact (\u0026gt;30 hours) or short-term bone, tissue, and dentin (\u0026lt;24 hours). This USP Class VI certified material is suitable for pharmaceutical and drug delivery applications and uses that require wear resistance and low water absorption over time.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eParts printed with BioMed Clear Resin are compatible with common sterilization methods.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBioMed Clear Resin is manufactured in our FDA-registered, ISO 13485 certified facility and is supported with an FDA Device Master File.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_black__nDqD6\"\u003eWhy Choose BioMed Clear Resin?\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_light__fRWzv Header_grey__pVdrk\"\u003eFuel medical innovation using 3D printing and BioMed Clear Resin for producing end-use devices where performance and biocompatibility are critical.\u003c\/h4\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-stethoscope Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eMedical-Grade Material\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eLeverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485.\u003ci class=\"fl-v2 fl-v2-fl-soap_bubbles_cleaning Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eBiocompatible and Sterilizable Parts\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eTesting conducted by Formlabs for common use cases is intended to instill confidence that this material is suitable for biocompatible applications.\u003ci class=\"fl-v2 fl-v2-fl-shapes_circle_square Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eTransparent\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eVisibility through parts allows light to pass through.\u003ci class=\"fl-v2 fl-v2-fl-high_detail Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eExcellent Definition\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eProduce parts and assemblies with complex designs and geometries.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_black__nDqD6\"\u003eApplications\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_grey__pVdrk\"\u003eUse BioMed Clear Resin for producing rigid, transparent parts for point-of-care and medical manufacturing applications requiring biocompatibility.\u003c\/h4\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e\u003cstrong\u003eConsider BioMed Clear Resin for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs Grid_small-24__YV7NB Grid_medium-12__Lt5EN Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__YgcKN\"\u003e\n\u003cul\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eEnd-use devices\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eBiocompatible prototypes, molds, jigs + fixtures\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eModels for visualization and implant sizing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT\"\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eGas pathway connectors, adapters + devices\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs Grid_small-24__YV7NB Grid_medium-12__Lt5EN Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e\u003csub\u003e*Unlike Formlabs Dental Resins, no intended uses are provided for BioMed Resins. Material properties may vary based on part design, manufacturing practices and other methods. It is the manufacturer’s responsibility and its respective customers and end-users to determine the biocompatibility and performance of all printed parts for their respective application and use. To instill confidence in potential users, Formlabs has tested biocompatibility and sterilization compatibility for common use cases and manufactures BioMed Resins in an ISO 13485 certified facility. We can offer representative examples of what customers have done with our products and the supporting documentation we make freely available.\u003c\/sub\u003e\u003c\/p\u003e\n\u003cdiv class=\"Grid_section__NbaNC light\" id=\"material-headline\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q light\"\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-margin-x__MQ6jY Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-8__l_c_L Grid_large-8__3LN_a Grid_small-offset-0__RgpwR Grid_medium-offset-8__6cv87 Grid_large-offset-8__As2G7\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"CombinedHeadlines_removeMarginChildren__POo4I\"\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_black__nDqD6\"\u003eMaterial Properties\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\" id=\"material-properties\"\u003e\n\u003cdiv class=\"ComparisonTable_comparison-table__Oz3pO ComparisonTable_columns-1__3mh79\"\u003e\n\u003cdiv class=\"ComparisonTable_table-column__e5YQa ComparisonTable_col-1__1GCYC ComparisonTable_light__rcwd2\"\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_row-1__dscBS ComparisonTable_drop-down__dJqor\"\u003e\n\u003cp class=\"ComparisonTable_column-title__4cbif\"\u003eBioMed Clear Resin\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_first__TXWNG ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eUltimate Tensile Strength: 52 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eYoung’s Modulus: 2080 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eElongation: 12%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Strength: 84 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Modulus: 2300 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHardness Shore D: 78 D\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eNotched Izod: 35 J\/m\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHeat Deflection Temp @ 0.45 MPa: 67 ºC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

BioMed Clear Resin (Form 4B) 1L

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$478.13

BioMed Clear Resin is a transparent, hard, strong, and wear-resistant material for biocompatible applications requiring long-term skin (>30 days), breathing gas pathways, and mucosal membrane contact (>30 hours) or short-term bone, tissue, and dentin (<24 hours). This USP Class VI certified material is suitable for pharmaceutical and dr...

Clear Cast Resin (Form 4) 1L

IN STOCK: 9

$204.13

{"id":8742210339052,"title":"Clear Cast Resin (Form 4) 1L","handle":"clear-cast-resin-form-4-1l","description":"\u003cp\u003eClear Cast Resin is a resin designed for investment casting, to directly print patterns that can be invested and cast. It has an extremely low thermal expansion, low ash, and no trace heavy metals.\u003c\/p\u003e\n\u003cp\u003eClear Cast Resin, paired with a latticing software, is recommended for use with larger parts, excelling at producing geometries thicker than 3 mm.\u003c\/p\u003e\n\u003cp\u003eForm 4(B)L print settings are in progress, view the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Form-4L-generation-print-settings-roadmap\" data-mce-href=\"https:\/\/support.formlabs.com\/s\/article\/Form-4L-generation-print-settings-roadmap\"\u003esettings roadmap\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto see when settings for this material will be available on the Form 4(B)L.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_light-primary__6tIVy\"\u003eWhy Choose Clear Cast Resin?\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_light__fRWzv Header_light-tertiary__DHZLS\"\u003eClear Cast Resin is an accessible solution for directly printing casting patterns in house.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-dimensional_accuracy Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\n\u003c\/h4\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eAccessible pattern production in-house\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eClear Cast Resin on Formlabs SLA printers enables direct production of casting patterns in-house which reduces costs, decreases turnaround times, and improves flexibility in iterating and production.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-shapes_circle_square Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eLow Thermal Expansion\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eBest in class thermal expansion for reliable casting shells with minimal cracking.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eClean Burnout\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eClear Cast Resin achieves a clean burnout with low ash and no trace metals, leaving nothing to contaminate the final cast part. Clear Cast Resin is fully antimony free.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-resin_drop Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eAccurate and Versatile\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eCreate accurate patterns within 0.25 mm of the design. Compatible with any metal or shelling system, allowing foundries to cast new designs in record time.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_theme__t__oj\"\u003eWorkflow for 3D Printing Investment Casting Patterns\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_light__vLNDo TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e3D printed patterns can be used to directly replace the molded wax patterns typically used for investment casting allowing for complex geometries, and faster iterations without dedicated tooling. The process for creating a 3D printed pattern is typically:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eShell, lattice, and add drain holes to the part with a tool like\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.materialise.com\/en\/industrial\/software\/magics-data-build-preparation\" data-mce-href=\"https:\/\/www.materialise.com\/en\/industrial\/software\/magics-data-build-preparation\" target=\"_blank\"\u003eMaterialise Magics\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.formware.co\/slicer\" data-mce-href=\"https:\/\/www.formware.co\/slicer\" target=\"_blank\"\u003eFormware\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOrient, support, and slice the pattern in\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/formlabs.com\/software\/preform\/\" data-mce-href=\"https:\/\/formlabs.com\/software\/preform\/\" target=\"_self\"\u003ePreForm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrint the pattern\u003c\/li\u003e\n\u003cli\u003eWash, post-cure, and remove supports\u003c\/li\u003e\n\u003cli\u003ePlug any drain holes with wax or cure a small amount of Clear Cast Resin over the hole\u003c\/li\u003e\n\u003cli\u003eAttach the pattern to a casting tree and proceed with the rest of the casting process\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv id=\"material-headline\" class=\"Grid_section__NbaNC light\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q light\"\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-margin-x__MQ6jY Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-8__l_c_L Grid_large-8__3LN_a Grid_small-offset-0__RgpwR Grid_medium-offset-8__6cv87 Grid_large-offset-8__As2G7\"\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_theme__t__oj\"\u003eMechanical and Burnout Properties\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"mechanical-and burnout properties\" class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\"\u003e\n\u003cdiv class=\"ComparisonTable_comparison-table__Oz3pO ComparisonTable_columns-1__3mh79\"\u003e\n\u003cdiv class=\"ComparisonTable_table-column__e5YQa ComparisonTable_col-1__1GCYC ComparisonTable_light__rcwd2\"\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_row-1__dscBS ComparisonTable_drop-down__dJqor\"\u003e\n\u003cp class=\"ComparisonTable_column-title__4cbif\"\u003eTech Specs\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_first__TXWNG ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eUltimate Tensile Strength: 65 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eTensile Modulus: 2.8 GPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Modulus: 2.2 GPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eThermal Expansion, -30-140°C: 94.8 μm\/m\/°C\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eAsh Content: \u0026lt;0.20%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eAntimony: \u0026lt;10 ppm\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eDetected Transition Metals (\u0026gt;10 ppm): Al, Cu\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHigh Concentration Transition Metals (\u0026gt;50 ppm): None\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-12-11T18:40:58-05:00","created_at":"2024-12-11T18:05:02-05:00","vendor":"Formlabs","type":"Formlabs Resins","tags":["Form 4","formlabs","resin"],"price":20413,"price_min":20413,"price_max":20413,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45983285117164,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-CLC-0F4-01L-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Clear Cast Resin (Form 4) 1L","public_title":null,"options":["Default Title"],"price":20413,"weight":1500,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294036619","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Clear_Cast_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733959164","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Clear_Cast_Resin_For_Form_4_Printed_Parts_Picture.webp?v=1733960442"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Clear_Cast_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733959164","options":["Title"],"media":[{"alt":null,"id":34633426370796,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Clear_Cast_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733959164"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Clear_Cast_Resin_For_Form_4_1_Liter_Product_Picture.webp?v=1733959164","width":1400},{"alt":null,"id":34633596109036,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Clear_Cast_Resin_For_Form_4_Printed_Parts_Picture.webp?v=1733960442"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Clear_Cast_Resin_For_Form_4_Printed_Parts_Picture.webp?v=1733960442","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eClear Cast Resin is a resin designed for investment casting, to directly print patterns that can be invested and cast. It has an extremely low thermal expansion, low ash, and no trace heavy metals.\u003c\/p\u003e\n\u003cp\u003eClear Cast Resin, paired with a latticing software, is recommended for use with larger parts, excelling at producing geometries thicker than 3 mm.\u003c\/p\u003e\n\u003cp\u003eForm 4(B)L print settings are in progress, view the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.formlabs.com\/s\/article\/Form-4L-generation-print-settings-roadmap\" data-mce-href=\"https:\/\/support.formlabs.com\/s\/article\/Form-4L-generation-print-settings-roadmap\"\u003esettings roadmap\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto see when settings for this material will be available on the Form 4(B)L.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_light-primary__6tIVy\"\u003eWhy Choose Clear Cast Resin?\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__tslDZ Header_as-h6__GvDx_ Header_weight-700__7q4hC Header_light__fRWzv Header_light-tertiary__DHZLS\"\u003eClear Cast Resin is an accessible solution for directly printing casting patterns in house.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-dimensional_accuracy Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\n\u003c\/h4\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eAccessible pattern production in-house\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eClear Cast Resin on Formlabs SLA printers enables direct production of casting patterns in-house which reduces costs, decreases turnaround times, and improves flexibility in iterating and production.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-shapes_circle_square Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eLow Thermal Expansion\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eBest in class thermal expansion for reliable casting shells with minimal cracking.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-circle_check_solid Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__M23th Grid_grid-padding-x__xTuFF Grid_stretch__XuYGx\"\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eClean Burnout\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eClear Cast Resin achieves a clean burnout with low ash and no trace metals, leaving nothing to contaminate the final cast part. Clear Cast Resin is fully antimony free.\u003ci role=\"presentation\" aria-hidden=\"true\" class=\"fl-v2 fl-v2-fl-resin_drop Icon_black__3Fzk3 Icon_icon___a8Fw SimpleCallout_icon__hPpFF\"\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__jxxjs light Grid_small-24__YV7NB Grid_medium-24__47Wwp Grid_large-12__saMdZ Grid_small-offset-0__0Tjx6 Grid_medium-offset-0__vs8uW Grid_large-offset-0__QEG6e\"\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eAccurate and Versatile\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eCreate accurate patterns within 0.25 mm of the design. Compatible with any metal or shelling system, allowing foundries to cast new designs in record time.\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_theme__t__oj\"\u003eWorkflow for 3D Printing Investment Casting Patterns\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_light__vLNDo TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003e3D printed patterns can be used to directly replace the molded wax patterns typically used for investment casting allowing for complex geometries, and faster iterations without dedicated tooling. The process for creating a 3D printed pattern is typically:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eShell, lattice, and add drain holes to the part with a tool like\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.materialise.com\/en\/industrial\/software\/magics-data-build-preparation\" data-mce-href=\"https:\/\/www.materialise.com\/en\/industrial\/software\/magics-data-build-preparation\" target=\"_blank\"\u003eMaterialise Magics\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.formware.co\/slicer\" data-mce-href=\"https:\/\/www.formware.co\/slicer\" target=\"_blank\"\u003eFormware\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOrient, support, and slice the pattern in\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/formlabs.com\/software\/preform\/\" data-mce-href=\"https:\/\/formlabs.com\/software\/preform\/\" target=\"_self\"\u003ePreForm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrint the pattern\u003c\/li\u003e\n\u003cli\u003eWash, post-cure, and remove supports\u003c\/li\u003e\n\u003cli\u003ePlug any drain holes with wax or cure a small amount of Clear Cast Resin over the hole\u003c\/li\u003e\n\u003cli\u003eAttach the pattern to a casting tree and proceed with the rest of the casting process\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv id=\"material-headline\" class=\"Grid_section__NbaNC light\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q light\"\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-margin-x__MQ6jY Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-8__l_c_L Grid_large-8__3LN_a Grid_small-offset-0__RgpwR Grid_medium-offset-8__6cv87 Grid_large-offset-8__As2G7\"\u003e\n\u003ch2 class=\"Header_headerText__tslDZ Header_as-h4__cL_Vt Header_weight-700__7q4hC Header_light__fRWzv Header_theme__t__oj\"\u003eMechanical and Burnout Properties\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"mechanical-and burnout properties\" class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\"\u003e\n\u003cdiv class=\"ComparisonTable_comparison-table__Oz3pO ComparisonTable_columns-1__3mh79\"\u003e\n\u003cdiv class=\"ComparisonTable_table-column__e5YQa ComparisonTable_col-1__1GCYC ComparisonTable_light__rcwd2\"\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_row-1__dscBS ComparisonTable_drop-down__dJqor\"\u003e\n\u003cp class=\"ComparisonTable_column-title__4cbif\"\u003eTech Specs\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_first__TXWNG ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eUltimate Tensile Strength: 65 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eTensile Modulus: 2.8 GPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eFlexural Modulus: 2.2 GPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eThermal Expansion, -30-140°C: 94.8 μm\/m\/°C\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eAsh Content: \u0026lt;0.20%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eAntimony: \u0026lt;10 ppm\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eDetected Transition Metals (\u0026gt;10 ppm): Al, Cu\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eHigh Concentration Transition Metals (\u0026gt;50 ppm): None\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_white__XWaAB ComparisonTable_center__aI5jg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Clear Cast Resin (Form 4) 1L

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$204.13

Clear Cast Resin is a resin designed for investment casting, to directly print patterns that can be invested and cast. It has an extremely low thermal expansion, low ash, and no trace heavy metals. Clear Cast Resin, paired with a latticing software, is recommended for use with larger parts, excelling at producing geometries thicker than 3 mm. Fo...

Bambu Lab PetG-CF (Carbon Fiber Reinforced PetG) 1Kg on spool

IN STOCK: 4

$44.99

{"id":8727219601644,"title":"Bambu Lab PetG-CF (Carbon Fiber Reinforced PetG) 1Kg on spool","handle":"bambu-lab-petg-cf-carbon-fiber-reinforced-petg-1kg-on-spool","description":"\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PETG-CF\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improved printing quality by reducing clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny look. It is an ideal material for drone parts, racing models, and various functional parts that require both high performance, especially impact strength, and a sleek appearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eProduct Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLess Clumping and Stringing\u003c\/li\u003e\n\u003cli\u003ePremium Print Surface\u003c\/li\u003e\n\u003cli\u003eImproved Mechanical Properties \u0026amp; High Flexibility\u003c\/li\u003e\n\u003cli\u003eComes with Basic Reusable Spool\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eDry before Use for the Highest Print Quality\u003c\/li\u003e\n\u003cli\u003eAMS Compatible\u003c\/li\u003e\n\u003cli\u003eAMS lite\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eLess clumping and stringing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg-cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/petg-1.png?v=16780913210\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003ePremium print surface\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eCarbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg-cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/2_ee9161ae-0f23-4111-aeb5-4241f6776a46.png?v=1690438956\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpcic\"\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eCarbon Fiber Texture\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eCarbon fiber brings soft reflection, minimal layer lines and a unique delicate texture.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/4_615d5a1f-be76-4343-be18-9327355320ae.png?v=1690423973\" alt=\"petg-cf\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eShiny Finish\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eDifferent from PLA-CF's matte finish, PETG-CF offers a shiny finish and thus one more choice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/3_1d41599f-369e-4670-ae5c-0f3aab9f5670.png?v=1691395052\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eStrong XY Performance\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eThe addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/PETG-CF-DATA.jpg?v=1693881215\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eParameters Comparison\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cp\u003e\u003cspan\u003eLearn more different filaments comparison on \u003ca href=\"https:\/\/bambulab.com\/en\/filament-guide\" title=\"Bambu Filaments Guide\" target=\"_blank\"\u003eBambu Filament Guide \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePLA-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePETG-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrice\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eFilament Type\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHotend Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBuild Plate Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate, Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate, Textuerd PEI Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eAMS Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eSurface\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eMatte\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eShiny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrint Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt;250 mm\/s\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt;200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eToughness (Impact Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStrength (Bending Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStiffness (Bending Modulus - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eLayer Adhesion (Impact Strength - Z)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e7.8 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.7 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Resistant（HDT, 0.45 MPa）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eHigh Flexibility\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eCompared to other carbon fiber materials, Bambu PETG-CF exhibits exceptional toughness\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eand is less prone to fracture under external stress and impact.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PETG-CF_VS_PLA-CF.png\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel Nozzle (0.4 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eStainless Steel Nozzle (0.2 \/ 0.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003cbr\u003eGlue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePETG-CF Hex Code Table\u003c\/h3\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHex Code\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eDisplay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBrick Red\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#9f332a\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eViolet Purple\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#583061\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eIndigo Blue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#324585\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMalachite Green\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#16b08e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBlack\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#000000\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTitan Gray\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#565656\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eRFID for Intelligent Printing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eAll printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eLoad and print! No more tedious setting steps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/RFID_70c381bd-0270-4d8b-b778-51aa52b6971b.gif?v=1677494900\" alt=\"rfid\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_table-row\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"pct_td\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e65 °C，8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e240 - 270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e65 - 75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003ePhysical Properties\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.25 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e225 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e19.3 ± 2.4 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eMechanical Properties\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e35 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.4 ± 0.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 ± 260 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 ± 2.6 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"pct_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eDownloads\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PETG-CF_Technical_Data_Sheet_V2.pdf\" title=\"Bambu PETG-CF TDS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PETG-CF_MSDS.pdf\" title=\"Bambu PETG-CF MSDS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PETG-CF_RoHS.pdf?v=1693451664\" title=\"Bambu PETG-CF RoHS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpc\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePrinting Tips\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eBambu PETG-CF needs proper drying before printing. Drying conditions: 65℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Bambu filament drying cover\" target=\"_blank\"\u003e\u003cspan\u003e\u003cstrong\u003eFilament drying instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eTo get stronger Z-adhesion, please set a higher infill density, and do not use an open-frame printer or set too large fan percentages to avoid over cooling.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eTo get shinier looks, set lower speeds and relatively higher temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cdiv class=\"pct_icpc pct_grad-2-pc pct_grad-2-mobile\"\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/9.png?v=1678074630\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003eFilament with Spool*1 \u0026amp; Desiccant*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"图片加载失败文案\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/11_657f3b34-b894-475e-9052-dcfafb17496d.png?v=1678074630\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003ePackage*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-11-25T12:19:56-05:00","created_at":"2024-11-25T12:07:23-05:00","vendor":"Bambu Lab","type":"bambu Lab Filaments","tags":["1.75mm","Bambu Lab","Filaments","PetG-CF","X1C","X1CC","X1E"],"price":4499,"price_min":4499,"price_max":4499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45942213476588,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"BBL-FLM-PTG-CF0-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":42092475613420,"product_id":8727219601644,"position":2,"created_at":"2024-11-25T12:16:17-05:00","updated_at":"2024-11-25T12:16:18-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Black_Product_Image.webp?v=1732554978","variant_ids":[45942213476588]},"available":true,"name":"Bambu Lab PetG-CF (Carbon Fiber Reinforced PetG) 1Kg on spool - Black","public_title":"Black","options":["Black"],"price":4499,"weight":1400,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6975337032243","featured_media":{"alt":null,"id":34561481769196,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Black_Product_Image.webp?v=1732554978"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Product_Image.webp?v=1732554903","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Black_Product_Image.webp?v=1732554978"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Product_Image.webp?v=1732554903","options":["Color"],"media":[{"alt":null,"id":34561477083372,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Product_Image.webp?v=1732554903"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Product_Image.webp?v=1732554903","width":1400},{"alt":null,"id":34561481769196,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Black_Product_Image.webp?v=1732554978"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Black_Product_Image.webp?v=1732554978","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PETG-CF\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improved printing quality by reducing clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny look. It is an ideal material for drone parts, racing models, and various functional parts that require both high performance, especially impact strength, and a sleek appearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eProduct Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLess Clumping and Stringing\u003c\/li\u003e\n\u003cli\u003ePremium Print Surface\u003c\/li\u003e\n\u003cli\u003eImproved Mechanical Properties \u0026amp; High Flexibility\u003c\/li\u003e\n\u003cli\u003eComes with Basic Reusable Spool\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eDry before Use for the Highest Print Quality\u003c\/li\u003e\n\u003cli\u003eAMS Compatible\u003c\/li\u003e\n\u003cli\u003eAMS lite\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eLess clumping and stringing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg-cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/petg-1.png?v=16780913210\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003ePremium print surface\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eCarbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg-cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/2_ee9161ae-0f23-4111-aeb5-4241f6776a46.png?v=1690438956\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpcic\"\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eCarbon Fiber Texture\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eCarbon fiber brings soft reflection, minimal layer lines and a unique delicate texture.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/4_615d5a1f-be76-4343-be18-9327355320ae.png?v=1690423973\" alt=\"petg-cf\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eShiny Finish\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eDifferent from PLA-CF's matte finish, PETG-CF offers a shiny finish and thus one more choice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/3_1d41599f-369e-4670-ae5c-0f3aab9f5670.png?v=1691395052\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eStrong XY Performance\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eThe addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/PETG-CF-DATA.jpg?v=1693881215\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eParameters Comparison\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cp\u003e\u003cspan\u003eLearn more different filaments comparison on \u003ca href=\"https:\/\/bambulab.com\/en\/filament-guide\" title=\"Bambu Filaments Guide\" target=\"_blank\"\u003eBambu Filament Guide \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePLA-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePETG-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrice\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eFilament Type\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHotend Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBuild Plate Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate, Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate, Textuerd PEI Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eAMS Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eSurface\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eMatte\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eShiny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrint Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt;250 mm\/s\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt;200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eToughness (Impact Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStrength (Bending Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStiffness (Bending Modulus - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eLayer Adhesion (Impact Strength - Z)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e7.8 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.7 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Resistant（HDT, 0.45 MPa）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eHigh Flexibility\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eCompared to other carbon fiber materials, Bambu PETG-CF exhibits exceptional toughness\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eand is less prone to fracture under external stress and impact.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PETG-CF_VS_PLA-CF.png\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel Nozzle (0.4 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eStainless Steel Nozzle (0.2 \/ 0.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003cbr\u003eGlue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePETG-CF Hex Code Table\u003c\/h3\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHex Code\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eDisplay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBrick Red\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#9f332a\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eViolet Purple\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#583061\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eIndigo Blue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#324585\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMalachite Green\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#16b08e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBlack\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#000000\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTitan Gray\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#565656\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eRFID for Intelligent Printing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eAll printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eLoad and print! No more tedious setting steps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/RFID_70c381bd-0270-4d8b-b778-51aa52b6971b.gif?v=1677494900\" alt=\"rfid\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_table-row\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"pct_td\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e65 °C，8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e240 - 270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e65 - 75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003ePhysical Properties\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.25 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e225 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e19.3 ± 2.4 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eMechanical Properties\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e35 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.4 ± 0.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 ± 260 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 ± 2.6 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"pct_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eDownloads\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PETG-CF_Technical_Data_Sheet_V2.pdf\" title=\"Bambu PETG-CF TDS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PETG-CF_MSDS.pdf\" title=\"Bambu PETG-CF MSDS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PETG-CF_RoHS.pdf?v=1693451664\" title=\"Bambu PETG-CF RoHS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpc\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePrinting Tips\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eBambu PETG-CF needs proper drying before printing. Drying conditions: 65℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Bambu filament drying cover\" target=\"_blank\"\u003e\u003cspan\u003e\u003cstrong\u003eFilament drying instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eTo get stronger Z-adhesion, please set a higher infill density, and do not use an open-frame printer or set too large fan percentages to avoid over cooling.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eTo get shinier looks, set lower speeds and relatively higher temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cdiv class=\"pct_icpc pct_grad-2-pc pct_grad-2-mobile\"\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/9.png?v=1678074630\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003eFilament with Spool*1 \u0026amp; Desiccant*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"图片加载失败文案\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/11_657f3b34-b894-475e-9052-dcfafb17496d.png?v=1678074630\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003ePackage*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Bambu Lab PetG-CF (Carbon Fiber Reinforced PetG) 1Kg on spool

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$44.99

Bambu PETG-CF Bambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improved printing quality by reducing clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny look. It is an ideal material for dro...

Bambu Lab PLA-CF (Carbon Fiber Reinforced PLA) 1Kg on spool

IN STOCK: 4

$44.99

{"id":8727192961260,"title":"Bambu Lab PLA-CF (Carbon Fiber Reinforced PLA) 1Kg on spool","handle":"bambu-lab-pla-cf-carbon-fiber-reinforced-pla-1kg-on-spool","description":"\u003ch2 class=\"pct_t\"\u003eBambu PLA-CF\u003c\/h2\u003e\n\u003cp class=\"pct_p\" style=\"text-align: left;\"\u003eBambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Texture \u0026amp; Minimized Layer Lines\u003c\/li\u003e\n\u003cli\u003eImproved Mechanical Properties\u003c\/li\u003e\n\u003cli\u003eStablized Printing Dimension\u003c\/li\u003e\n\u003cli\u003eComes with Basic Reusable Spool\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eDry before Use for the Highest Print Quality\u003c\/li\u003e\n\u003cli\u003eAMS \u0026amp; AMS lite Compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PLA-CF\u003c\/h2\u003e\n\u003cp class=\"pct_p\" style=\"text-align: left;\"\u003eBambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eCarbon fiber texture \u0026amp; Minimized layer lines\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eThe addition of carbon fiber gives prints a unique matte finish and effectively hides layer lines, providing a smooth, premium look.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PLA_CF.png?v=1684313500\" alt=\"pla cf\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"pla cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/pla_carbon_fiber_texture_1.png\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDisplay of Prints\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF could be paired with any PLA series filament to make your prints more colorful and achieve various texture requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"pla cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0645\/5876\/0155\/files\/PLA_CF_Prints_1.jpg\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpcic\"\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eImproved mechanical properties\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF exceeds the mechanical properties of PLA Matte in XY Bending Strength, Z Bending Strength, XY Bending Modulus, Z Bending Modulus, XY Impact Strength, and Z Impact Strength by between 20% and 115%, making it more suitable for printing models with higher strength requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\n\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0645\/5876\/0155\/files\/PLA_CF_PIC_5.jpg\" alt=\"pla cf\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch3 class=\"pct_st\"\u003eMechanical Properties Comparison\u003c\/h3\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePLA Matte\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePLA-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eImproved %\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength - XY\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e32\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e38\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e19%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength - Z\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e25\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e26\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength - XY\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e53\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e68%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength - Z\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e32\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e49\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e53%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus - XY\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2360\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e67%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus - Z\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2040\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2260\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength - XY\/(kJ\/m²)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e19.2\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e20%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength - Z\/(kJ\/m²)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e6.6\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e7.8\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e18%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"pct_p pct_padding-in-mobile\" style=\"text-align: left; margin-top: 15px;\"\u003e*Drying PLA is recommended for humid environments at 55 °C for 8 hours before printing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eStablized printing dimension\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF features low shrinkage and warping resistance to achieve a perfect matching accuracy between prints parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\n\u003cp\u003e\u003cvideo src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/d4624068d86e4081abaf4bbe59bfe674.mp4\" autoplay=\"autoplay\" controls=\"controls\" loop=\"loop\" muted=\"\" poster=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/5798\/0835\/files\/PLA_CF.jpg\" playsinline=\"\" style=\"width: 100%;\" data-mce-src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/d4624068d86e4081abaf4bbe59bfe674.mp4\"\u003e\u003c\/video\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eMinimal effort in support removal\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF is designed to support itself. It can be removed more easily compared to regular PLA, and still maintains a smooth support surface.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0645\/5876\/0155\/files\/pla_cf_unicorn.png?v=1710901790\" alt=\"pla cf\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpcic\"\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eNot prone to clogging in high-speed printing\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF is just as easy to print as regular PLA. It can be printed smoothly and consistently at high speed without clogging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0645\/5876\/0155\/files\/pla_model_4.png?v=1678181130\" alt=\"pla cf\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel Nozzle (0.4 \/ 0.6 \/ 0.8 mm）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eStainless Steel Nozzle (0.2 \/ 0.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003cbr\u003eGlue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePLA-CF Hex Code Table\u003c\/h3\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHex Code\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eDisplay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBurgundy Red\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#951e23\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMatcha Green\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#5c9748\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eJeans Blue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#6e88bc\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eRoyal Blue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#2842AD\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eIris Purple\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#69398E\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eLava Gray\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#4d5054\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBlack\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#000000\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eRFID for Intelligent Printing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eAll printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eLoad and print! No more tedious setting steps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_head-ic\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/RFID-1_a30f0edb-e7c7-456e-8ad2-eed1a2240b40.gif?v=1674205231\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eParameters Comparison\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cp\u003e\u003cspan\u003eLearn more different filaments comparison on \u003ca title=\"Bambu Filaments Guide\" href=\"https:\/\/bambulab.com\/en\/filament-guide\" target=\"_blank\"\u003eBambu Filament Guide \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePETG-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePLA-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrice\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eFilament Type\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHotend Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBuild Plate Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate, Textuerd PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate, Textuerd PEI Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eAMS Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eSurface\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eShiny\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrint Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eToughness (Impact Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStrength (Bending Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStiffness (Bending Modulus - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eLayer Adhesion (Impact Strength - Z)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.7 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e7.8 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Resistant（HDT, 0.45 MPa）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_table-row\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\" colspan=\"2\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C, 8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e210 - 240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e35 - 45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"pct_td\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.22 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e69 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e165 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3.7 ± 0.6 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"pct_td\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e38 ± 4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e8.4 ± 3.2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950 ± 190 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89 ± 4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2 ± 3.7 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"pct_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDownloads\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca title=\"Bambu PLA-CF TDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PLA-CF_Technical_Data_Sheet_V3.pdf\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png?v=1693452296\" alt=\"pdf\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu PLA-CF MSDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PLA-CF_MSDS.pdf\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png?v=1693452296\" alt=\"pdf\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu PLA-CF RoHS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PLA-CF_RoHS.pdf\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png?v=1693452296\" alt=\"pdf\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch3 class=\"pct_p\" style=\"text-align: left;\"\u003e\u003cstrong\u003ePrinting Tips\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Filament drying cover\" target=\"_blank\"\u003eFilament drying instructions\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cdiv class=\"pct_icpc pct_grad-2-pc pct_grad-2-mobile\"\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/9.png?v=1678074630\" alt=\"pla-cf\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003eFilament with Spool*1 \u0026amp; Desiccant*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/11_657f3b34-b894-475e-9052-dcfafb17496d.png?v=1678074630\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003ePackage*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-11-25T12:05:03-05:00","created_at":"2024-11-25T11:41:46-05:00","vendor":"Bambu Lab","type":"bambu Lab Filaments","tags":["1.75mm","Bambu Lab","Filaments","PLA-CF","X1C","X1CC","X1E"],"price":4499,"price_min":4499,"price_max":4499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45942208233708,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"BBL-FLM-PLA-CF0-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":42092422889708,"product_id":8727192961260,"position":2,"created_at":"2024-11-25T11:49:27-05:00","updated_at":"2024-11-25T11:49:28-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PLA-CF__Carbon_Fiber_Reinforced_PLA__1Kg_on_spool_Black_Product_Image.webp?v=1732553368","variant_ids":[45942208233708]},"available":true,"name":"Bambu Lab PLA-CF (Carbon Fiber Reinforced PLA) 1Kg on spool - Black","public_title":"Black","options":["Black"],"price":4499,"weight":1400,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6975337031758","featured_media":{"alt":null,"id":34561379893484,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PLA-CF__Carbon_Fiber_Reinforced_PLA__1Kg_on_spool_Black_Product_Image.webp?v=1732553368"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PLA-CF__Carbon_Fiber_Reinforced_PLA__1Kg_on_spool.webp?v=1732553236","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PLA-CF__Carbon_Fiber_Reinforced_PLA__1Kg_on_spool_Black_Product_Image.webp?v=1732553368"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PLA-CF__Carbon_Fiber_Reinforced_PLA__1Kg_on_spool.webp?v=1732553236","options":["Color"],"media":[{"alt":null,"id":34561374421228,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PLA-CF__Carbon_Fiber_Reinforced_PLA__1Kg_on_spool.webp?v=1732553236"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PLA-CF__Carbon_Fiber_Reinforced_PLA__1Kg_on_spool.webp?v=1732553236","width":1400},{"alt":null,"id":34561379893484,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PLA-CF__Carbon_Fiber_Reinforced_PLA__1Kg_on_spool_Black_Product_Image.webp?v=1732553368"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PLA-CF__Carbon_Fiber_Reinforced_PLA__1Kg_on_spool_Black_Product_Image.webp?v=1732553368","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 class=\"pct_t\"\u003eBambu PLA-CF\u003c\/h2\u003e\n\u003cp class=\"pct_p\" style=\"text-align: left;\"\u003eBambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Texture \u0026amp; Minimized Layer Lines\u003c\/li\u003e\n\u003cli\u003eImproved Mechanical Properties\u003c\/li\u003e\n\u003cli\u003eStablized Printing Dimension\u003c\/li\u003e\n\u003cli\u003eComes with Basic Reusable Spool\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eDry before Use for the Highest Print Quality\u003c\/li\u003e\n\u003cli\u003eAMS \u0026amp; AMS lite Compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PLA-CF\u003c\/h2\u003e\n\u003cp class=\"pct_p\" style=\"text-align: left;\"\u003eBambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eCarbon fiber texture \u0026amp; Minimized layer lines\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eThe addition of carbon fiber gives prints a unique matte finish and effectively hides layer lines, providing a smooth, premium look.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PLA_CF.png?v=1684313500\" alt=\"pla cf\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"pla cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/pla_carbon_fiber_texture_1.png\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDisplay of Prints\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF could be paired with any PLA series filament to make your prints more colorful and achieve various texture requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"pla cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0645\/5876\/0155\/files\/PLA_CF_Prints_1.jpg\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpcic\"\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eImproved mechanical properties\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF exceeds the mechanical properties of PLA Matte in XY Bending Strength, Z Bending Strength, XY Bending Modulus, Z Bending Modulus, XY Impact Strength, and Z Impact Strength by between 20% and 115%, making it more suitable for printing models with higher strength requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\n\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0645\/5876\/0155\/files\/PLA_CF_PIC_5.jpg\" alt=\"pla cf\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch3 class=\"pct_st\"\u003eMechanical Properties Comparison\u003c\/h3\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePLA Matte\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePLA-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eImproved %\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength - XY\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e32\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e38\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e19%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength - Z\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e25\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e26\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength - XY\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e53\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e68%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength - Z\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e32\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e49\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e53%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus - XY\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2360\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e67%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus - Z\/MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2040\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2260\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength - XY\/(kJ\/m²)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e19.2\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e20%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength - Z\/(kJ\/m²)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e6.6\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e7.8\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e18%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"pct_p pct_padding-in-mobile\" style=\"text-align: left; margin-top: 15px;\"\u003e*Drying PLA is recommended for humid environments at 55 °C for 8 hours before printing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eStablized printing dimension\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF features low shrinkage and warping resistance to achieve a perfect matching accuracy between prints parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\n\u003cp\u003e\u003cvideo src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/d4624068d86e4081abaf4bbe59bfe674.mp4\" autoplay=\"autoplay\" controls=\"controls\" loop=\"loop\" muted=\"\" poster=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/5798\/0835\/files\/PLA_CF.jpg\" playsinline=\"\" style=\"width: 100%;\" data-mce-src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/d4624068d86e4081abaf4bbe59bfe674.mp4\"\u003e\u003c\/video\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eMinimal effort in support removal\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF is designed to support itself. It can be removed more easily compared to regular PLA, and still maintains a smooth support surface.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0645\/5876\/0155\/files\/pla_cf_unicorn.png?v=1710901790\" alt=\"pla cf\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpcic\"\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eNot prone to clogging in high-speed printing\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA-CF is just as easy to print as regular PLA. It can be printed smoothly and consistently at high speed without clogging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0645\/5876\/0155\/files\/pla_model_4.png?v=1678181130\" alt=\"pla cf\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel Nozzle (0.4 \/ 0.6 \/ 0.8 mm）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eStainless Steel Nozzle (0.2 \/ 0.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003cbr\u003eGlue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePLA-CF Hex Code Table\u003c\/h3\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHex Code\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eDisplay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBurgundy Red\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#951e23\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMatcha Green\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#5c9748\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eJeans Blue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#6e88bc\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eRoyal Blue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#2842AD\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eIris Purple\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#69398E\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eLava Gray\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#4d5054\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBlack\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#000000\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eRFID for Intelligent Printing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eAll printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eLoad and print! No more tedious setting steps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_head-ic\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/RFID-1_a30f0edb-e7c7-456e-8ad2-eed1a2240b40.gif?v=1674205231\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eParameters Comparison\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cp\u003e\u003cspan\u003eLearn more different filaments comparison on \u003ca title=\"Bambu Filaments Guide\" href=\"https:\/\/bambulab.com\/en\/filament-guide\" target=\"_blank\"\u003eBambu Filament Guide \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePETG-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePLA-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrice\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eFilament Type\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHotend Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBuild Plate Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate, Textuerd PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate, Textuerd PEI Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eAMS Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eSurface\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eShiny\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrint Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eToughness (Impact Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStrength (Bending Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStiffness (Bending Modulus - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eLayer Adhesion (Impact Strength - Z)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.7 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e7.8 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Resistant（HDT, 0.45 MPa）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_table-row\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\" colspan=\"2\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C, 8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e210 - 240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e35 - 45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"pct_td\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.22 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e69 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e165 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3.7 ± 0.6 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"pct_td\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e38 ± 4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e8.4 ± 3.2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950 ± 190 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89 ± 4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2 ± 3.7 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"pct_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDownloads\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca title=\"Bambu PLA-CF TDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PLA-CF_Technical_Data_Sheet_V3.pdf\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png?v=1693452296\" alt=\"pdf\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu PLA-CF MSDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PLA-CF_MSDS.pdf\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png?v=1693452296\" alt=\"pdf\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu PLA-CF RoHS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PLA-CF_RoHS.pdf\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png?v=1693452296\" alt=\"pdf\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch3 class=\"pct_p\" style=\"text-align: left;\"\u003e\u003cstrong\u003ePrinting Tips\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Filament drying cover\" target=\"_blank\"\u003eFilament drying instructions\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cdiv class=\"pct_icpc pct_grad-2-pc pct_grad-2-mobile\"\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/9.png?v=1678074630\" alt=\"pla-cf\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003eFilament with Spool*1 \u0026amp; Desiccant*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/11_657f3b34-b894-475e-9052-dcfafb17496d.png?v=1678074630\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003ePackage*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Bambu Lab PLA-CF (Carbon Fiber Reinforced PLA) 1Kg on spool

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$44.99

Bambu PLA-CF Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineerin...

Formlabs Form Wash L 2nd Gen

IN STOCK: 0

$6,165.00

{"id":8717992919276,"title":"Formlabs Form Wash L 2nd Gen","handle":"form-wash-l-second-gen","description":"\u003cdiv align=\"justify\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cp\u003eAll SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time.\u003c\/p\u003e\n\u003cp\u003eOnce washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints. The embedded solvent monitor helps you maintain peak cleaning performance by notifying you when it’s time to replace your solvent.\u003c\/p\u003e\n\u003cp\u003eUse Form Wash L with all of your Formlabs SLA 3D printers. Wash one Form 3L build platform or two Form 3 build platforms with the included build platform adapter.\u003c\/p\u003e\n\u003cdiv class=\"Grid_section__hLX0Q\" id=\"adaptable-to-build-platforms\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"Header_headerText__erapV Header_as-h4__Y2Ob8 Header_weight-700__NTHpg Header_light__j0TFO Header_theme__gG0vm\"\u003eAdaptable to Build Platforms\u003c\/h2\u003e\n\u003ch3 class=\"Header_headerText__erapV Header_as-h6__XFefZ Header_weight-700__NTHpg Header_light__j0TFO Header_light-tertiary__anOx5\"\u003eSeamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.\u003c\/h3\u003e\n\u003cdiv class=\"Grid_section__hLX0Q\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\" id=\"data-table2\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ctable class=\"Table_data-table__lMJwp\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter Generation\u003c\/th\u003e\n\u003cth\u003eApplicable Build Platforms\u003c\/th\u003e\n\u003cth\u003e# Build Platforms That Can Fit on Form Wash L (2nd Generation)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm 2\u003cbr\u003eForm 3\/B\/+\u003c\/td\u003e\n\u003ctd\u003eStandard Build Platform\u003cbr\u003eBuild Platform 2 Stainless Steel Build Platform\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm 3L\/BL\u003c\/td\u003e\n\u003ctd\u003eForm 3L Build Platform\u003cbr\u003eForm 3L Build Platform 2L\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm 4\/B\u003c\/td\u003e\n\u003ctd\u003eForm 4 Build Platform\u003cbr\u003eForm 4 Build Platform Flex\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm 4L\/BL\u003c\/td\u003e\n\u003ctd\u003eForm 4L Build Platform\u003cbr\u003eForm 4L Build Platform Flex\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ch2 class=\"Header_headerText__erapV Header_as-h4__Y2Ob8 Header_weight-700__NTHpg Header_light__j0TFO Header_theme__gG0vm\"\u003eAutomate Cleaning With Form Wash L\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__erapV Header_as-h6__XFefZ Header_weight-700__NTHpg Header_light__j0TFO Header_light-tertiary__anOx5\"\u003eStreamline your 3D printing process to help you produce high-quality large-scale parts with less time and effort.\u003c\/h4\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-padding-x__Ltc50 Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eSet It And Forget It\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eUse the pre-programmed wash settings or save your own frequently used custom profiles to improve post-processing efficiency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eCompatible With All Formlabs Materials\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eSelect your material from a list and let Form Wash L auto-clean your parts for the appropriate time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eImproved Agitation\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eClean your parts thoroughly with 1.5x more agitation than the previous generation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eInformed Maintenance\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eThe embedded solvent monitor and cycle counter help you maintain peak cleaning performance by notifying you when it’s time to replace the solvent.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eAdaptable to Build Platforms\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eSeamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eWhat’s Included\u003c\/b\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003eForm Wash L (2nd Generation)\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eUniversal Adaptor for Form 3(L) Form 4(L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-11-18T11:00:32-05:00","created_at":"2024-11-18T10:26:33-05:00","vendor":"Formlabs","type":"Formlabs 3D Printers","tags":["formlabs","sla","Wash L"],"price":616500,"price_min":616500,"price_max":616500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45912389845228,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-WSH-3L0-000-002","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Formlabs Form Wash L 2nd Gen","public_title":null,"options":["Default Title"],"price":616500,"weight":10000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294036855","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_White_Printed_Part.webp?v=1731944729","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_Universal_Adapter_Picture.webp?v=1731944779","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Dental_Printed_Part.webp?v=1731944780","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Grey_Printed_Part.webp?v=1731944778"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_White_Printed_Part.webp?v=1731944729","options":["Title"],"media":[{"alt":null,"id":34522785972460,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_White_Printed_Part.webp?v=1731944729"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_White_Printed_Part.webp?v=1731944729","width":1400},{"alt":null,"id":34522814972140,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_Universal_Adapter_Picture.webp?v=1731944779"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_Universal_Adapter_Picture.webp?v=1731944779","width":1400},{"alt":null,"id":34522815135980,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Dental_Printed_Part.webp?v=1731944780"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Dental_Printed_Part.webp?v=1731944780","width":1400},{"alt":null,"id":34522815004908,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Grey_Printed_Part.webp?v=1731944778"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Wash_L_Second_Gen_PRoduct_Picture_With_Grey_Printed_Part.webp?v=1731944778","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cdiv class=\"text-plugin\"\u003e\n\u003cp\u003eAll SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time.\u003c\/p\u003e\n\u003cp\u003eOnce washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints. The embedded solvent monitor helps you maintain peak cleaning performance by notifying you when it’s time to replace your solvent.\u003c\/p\u003e\n\u003cp\u003eUse Form Wash L with all of your Formlabs SLA 3D printers. Wash one Form 3L build platform or two Form 3 build platforms with the included build platform adapter.\u003c\/p\u003e\n\u003cdiv class=\"Grid_section__hLX0Q\" id=\"adaptable-to-build-platforms\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"Header_headerText__erapV Header_as-h4__Y2Ob8 Header_weight-700__NTHpg Header_light__j0TFO Header_theme__gG0vm\"\u003eAdaptable to Build Platforms\u003c\/h2\u003e\n\u003ch3 class=\"Header_headerText__erapV Header_as-h6__XFefZ Header_weight-700__NTHpg Header_light__j0TFO Header_light-tertiary__anOx5\"\u003eSeamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.\u003c\/h3\u003e\n\u003cdiv class=\"Grid_section__hLX0Q\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\" id=\"data-table2\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ctable class=\"Table_data-table__lMJwp\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter Generation\u003c\/th\u003e\n\u003cth\u003eApplicable Build Platforms\u003c\/th\u003e\n\u003cth\u003e# Build Platforms That Can Fit on Form Wash L (2nd Generation)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm 2\u003cbr\u003eForm 3\/B\/+\u003c\/td\u003e\n\u003ctd\u003eStandard Build Platform\u003cbr\u003eBuild Platform 2 Stainless Steel Build Platform\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm 3L\/BL\u003c\/td\u003e\n\u003ctd\u003eForm 3L Build Platform\u003cbr\u003eForm 3L Build Platform 2L\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm 4\/B\u003c\/td\u003e\n\u003ctd\u003eForm 4 Build Platform\u003cbr\u003eForm 4 Build Platform Flex\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm 4L\/BL\u003c\/td\u003e\n\u003ctd\u003eForm 4L Build Platform\u003cbr\u003eForm 4L Build Platform Flex\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ch2 class=\"Header_headerText__erapV Header_as-h4__Y2Ob8 Header_weight-700__NTHpg Header_light__j0TFO Header_theme__gG0vm\"\u003eAutomate Cleaning With Form Wash L\u003c\/h2\u003e\n\u003ch4 class=\"Header_headerText__erapV Header_as-h6__XFefZ Header_weight-700__NTHpg Header_light__j0TFO Header_light-tertiary__anOx5\"\u003eStreamline your 3D printing process to help you produce high-quality large-scale parts with less time and effort.\u003c\/h4\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-padding-x__Ltc50 Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eSet It And Forget It\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eUse the pre-programmed wash settings or save your own frequently used custom profiles to improve post-processing efficiency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eCompatible With All Formlabs Materials\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eSelect your material from a list and let Form Wash L auto-clean your parts for the appropriate time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eImproved Agitation\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eClean your parts thoroughly with 1.5x more agitation than the previous generation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eInformed Maintenance\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eThe embedded solvent monitor and cycle counter help you maintain peak cleaning performance by notifying you when it’s time to replace the solvent.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-24__v1OpA Grid_large-12__eV38K Grid_small-offset-0__RgpwR Grid_medium-offset-0__vxC0V Grid_large-offset-0__S7cC_\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"SimpleCallout_title__gQ5vS\"\u003eAdaptable to Build Platforms\u003c\/h3\u003e\n\u003cp class=\"SimpleCallout_callout-text__MsST2\"\u003eSeamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eWhat’s Included\u003c\/b\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003eForm Wash L (2nd Generation)\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eUniversal Adaptor for Form 3(L) Form 4(L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Formlabs Form Wash L 2nd Gen

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$6,165.00

All SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time. Once washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints. The embedded solvent monitor helps you maintain peak cleaning perf...