Extrudeurs et têtes chauffantes

{"id":10152855177,"title":"The Olsson Ruby 0.40mm Nozzle","handle":"the-olsson-ruby-0-4mm-nozzle","description":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e","published_at":"2017-07-31T13:30:28-04:00","created_at":"2017-07-26T14:21:15-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["Hardware","Hotend","mk2","mk2s"],"price":12300,"price_min":12300,"price_max":12300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41722235977,"title":"1.75mm","option1":"1.75mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-175-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"The Olsson Ruby 0.40mm Nozzle - 1.75mm","public_title":"1.75mm","options":["1.75mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050186"},{"id":41722236041,"title":"2.85mm","option1":"2.85mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"The Olsson Ruby 0.40mm Nozzle - 2.85mm","public_title":"2.85mm","options":["2.85mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050179"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-1.jpg?v=1539829267","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-2.jpg?v=1539829267","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-3.jpg?v=1539829267","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-4.jpg?v=1539829267"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-40mm-nozzle-1.jpg?v=1539829267","options":["Filament diameter"],"content":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e"}

{"id":10217190793,"title":"Original Olsson Steel Nozzle 0.50mm","handle":"original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. This stainless steel nozzle will allow you to print abrasive filaments (\u003ca href=\"\/products\/colorfabb-xt-cf20-2-85mm-amphora3d-carbon-fiber\" target=\"_blank\" title=\"Colorfabb XT CF20 Carbon Fiber 2.85mm filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003ecf20\u003c\/a\u003e, \u003ca href=\"\/products\/colorfabb-glowfill-glowing-in-the-dark-2-85mm-pla-pha-750gr\" target=\"_blank\" title=\"Colorfabb Glowfill 2.85mm filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eGlowfill\u003c\/a\u003e, etc.) without the fear of wearing down your nozzle too quickly.\u003c\/p\u003e\n\u003cp\u003eHigh precision manufacturing, made in Sweden by 3DVerkstan. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in brass : \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor extra durability, consider the \u003ca href=\"\/products\/the-olsson-ruby-0-4mm-nozzle\" target=\"_blank\" title=\"The Olsson Ruby 0.40mm Nozzle\" rel=\"noopener noreferrer\"\u003eOlsson Ruby\u003c\/a\u003e (also available for 1.75mm filament).\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003estainless steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.50mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T15:14:30-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","steel","Ultimaker"],"price":1900,"price_min":1900,"price_max":1900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42539209033,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOS-285-050","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Original Olsson Steel Nozzle 0.50mm","public_title":null,"options":["Default Title"],"price":1900,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050063"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-steel-nozzle-0-50mm-1.jpg?v=1539829290"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-steel-nozzle-0-50mm-1.jpg?v=1539829290","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. This stainless steel nozzle will allow you to print abrasive filaments (\u003ca href=\"\/products\/colorfabb-xt-cf20-2-85mm-amphora3d-carbon-fiber\" target=\"_blank\" title=\"Colorfabb XT CF20 Carbon Fiber 2.85mm filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003ecf20\u003c\/a\u003e, \u003ca href=\"\/products\/colorfabb-glowfill-glowing-in-the-dark-2-85mm-pla-pha-750gr\" target=\"_blank\" title=\"Colorfabb Glowfill 2.85mm filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eGlowfill\u003c\/a\u003e, etc.) without the fear of wearing down your nozzle too quickly.\u003c\/p\u003e\n\u003cp\u003eHigh precision manufacturing, made in Sweden by 3DVerkstan. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in brass : \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor extra durability, consider the \u003ca href=\"\/products\/the-olsson-ruby-0-4mm-nozzle\" target=\"_blank\" title=\"The Olsson Ruby 0.40mm Nozzle\" rel=\"noopener noreferrer\"\u003eOlsson Ruby\u003c\/a\u003e (also available for 1.75mm filament).\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003estainless steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.50mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":10217114249,"title":"Original Olsson Brass Nozzle 0.25mm","handle":"original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.25mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T14:55:21-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538669449,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-025","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.25mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050025"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-25mm-1.jpeg?v=1539829284"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-25mm-1.jpeg?v=1539829284","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.25mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":10217098441,"title":"Original Olsson Brass Nozzle 0.40mm","handle":"original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T14:51:34-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538516745,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.40mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050032"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-40mm-1.jpeg?v=1539829282"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-40mm-1.jpeg?v=1539829282","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":10217149769,"title":"Original Olsson Brass Nozzle 0.60mm","handle":"original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.60mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T15:02:17-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538903817,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-060","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.60mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050124"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-60mm-1.jpeg?v=1539829286"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-60mm-1.jpeg?v=1539829286","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.80mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.80mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.60mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":10217153993,"title":"Original Olsson Brass Nozzle 0.80mm","handle":"original-olsson-brass-nozzle-0-80mm-for-2-85mm-filament","description":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.80mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-04T14:19:27-04:00","created_at":"2017-08-04T15:03:29-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["2.85mm","nozzle","Ultimaker"],"price":1350,"price_min":1350,"price_max":1350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42538935625,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-NOZ-OOB-285-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Olsson Brass Nozzle 0.80mm","public_title":null,"options":["Default Title"],"price":1350,"weight":100,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050131"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-80mm-1.jpeg?v=1539829288"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-original-olsson-brass-nozzle-0-80mm-1.jpeg?v=1539829288","options":["Title"],"content":"\u003cp\u003eThe original Olsson nozzle, as seen on the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e and \u003ca href=\"https:\/\/voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-2-extended-plus-3d-printer\" title=\"Ultimaker 2+ Extended 3D printer at Voxel Factory\"\u003eUltimaker 2+ Extended\u003c\/a\u003e. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-25mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Brass Nozzle 0.25mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-40mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.40mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.40mm\u003c\/a\u003e, \u003ca href=\"\/products\/original-olsson-brass-nozzle-0-60mm-for-2-85mm-filament\" title=\"Original Olsson Brass Nozzle 0.60mm for 2.85mm filament\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0.60mm\u003c\/a\u003e, and \u003ca href=\"\/products\/original-olsson-steel-nozzle-0-50mm-for-2-85mm-filament\" target=\"_blank\" title=\"Original Olsson Steel Nozzle 0.50mm for 2.85mm filament\" rel=\"noopener noreferrer\"\u003estainless steel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003ebrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.80mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":7726136265,"title":"DyzEND-X + DyzeXtruder GT Full Kit for 1.75mm","handle":"dyzend-x-dyzextruder-gt-full-kit-for-1-75mm","description":"\u003cp\u003e***You will have to make modification to the firmware for the 500°C thermistor. If you want we also sell the 300°C thermistor \u003ca href=\"\/collections\/extruders-and-hotends\/products\/300-c-thermistors\" target=\"_blank\" title=\"300-c-thermistors\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e. For more information about the modification go \u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-firmware-configuration\/\" title=\"dyzend-firmware-configuration\"\u003ehere\u003c\/a\u003e.***\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eThe \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eDyze Design DyzEND-X\u003c\/strong\u003e \u003c\/span\u003eis a Canadian made, high performance all metal hotend that is able to print materials at up to 500\u003cspan\u003e°C\u003c\/span\u003e (24V, e\u003c\/span\u003e\u003cspan style=\"line-height: 1.4;\"\u003enclosed print area\u003c\/span\u003e\u003cspan style=\"line-height: 1.4;\"\u003e).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe 410 stainless steel nozzle can handle the most abrasive materials like Carbon Fiber filled filaments in addition to being easy and affordable to replace when needed.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDyze Design GT Xtruder\u003c\/span\u003e\u003c\/strong\u003e is a Canadian made, high quality and all metal extruder that is able to print any kind of materials. So far, we've personally tried using the very flexible NinjaFlex and it works like a charm.\u003c\/p\u003e\n\u003cp\u003eThe DyzeXtruder is 100% metal, groove mount, liquid cooling and bowden tube ready.\u003c\/p\u003e\n\u003ch5\u003eHotend\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFULL METAL HOTEND\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1x 0.4 mm 410 stainless steel nozzle\u003c\/li\u003e\n\u003cli\u003eHard Titanium \u003cspan\u003ethermal break\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with every 1.75mm filaments\u003c\/li\u003e\n\u003cli\u003eUp to 500°C \u003cspan\u003e(24V, e\u003c\/span\u003e\u003cspan\u003enclosed print area\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eExtruder\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFully assembled and tested all metal extruder\u003c\/li\u003e\n\u003cli\u003eCompatible with every 1.75mm filaments\u003c\/li\u003e\n\u003cli\u003eDual Pinch drive\u003c\/li\u003e\n\u003cli\u003eMetal Reduction Gears for High pushing force of 9kg (20lbs)\u003c\/li\u003e\n\u003cli\u003eEasy filament insertion and removal\u003c\/li\u003e\n\u003cli\u003eSimple hotend swapping \u003c\/li\u003e\n\u003cli\u003eLiquid Cooling Ready\u003c\/li\u003e\n\u003cli\u003eAdjustable width to connect the most known RepRap hotends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncluded\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAll metal DyzEND-X Hotend\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1x 0.4 mm 410 stainless steel nozzle.\u003c\/li\u003e\n\u003cli\u003e40W Ceramic Heater Cartridge\u003c\/li\u003e\n\u003cli\u003eAssembly of high-temperature thermistors (500°C)\u003c\/li\u003e\n\u003cli\u003eAll metal DyzeXtruder GT\u003c\/li\u003e\n\u003cli\u003eCustom-made spring specifically designed for optimal strength\u003c\/li\u003e\n\u003cli\u003eNEMA 17x40 stepper motor - 0.9 deg - 1.68 A\u003c\/li\u003e\n\u003cli\u003e1 meter cable\u003c\/li\u003e\n\u003cli\u003eEvery needed bolts\/nuts\/etc.\u003c\/li\u003e\n\u003cli\u003e2 Allen Keys (2 mm, 2.5 mm).\u003c\/li\u003e\n\u003cli\u003e3x Conical Washers\u003c\/li\u003e\n\u003cli\u003e2x M4 Screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cp\u003eKnown compatible materials\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColorFabb CarbonFiber XT CF20\u003c\/li\u003e\n\u003cli\u003eOther Carbon Fiber filled materials\u003c\/li\u003e\n\u003cli\u003ePEEK\u003c\/li\u003e\n\u003cli\u003ePLA\u003c\/li\u003e\n\u003cli\u003eABS\u003c\/li\u003e\n\u003cli\u003ePC\u003c\/li\u003e\n\u003cli\u003ePC-ABS\u003c\/li\u003e\n\u003cli\u003eColorFabb BrassFill\u003c\/li\u003e\n\u003cli\u003eColorFabb BronzeFill\u003c\/li\u003e\n\u003cli\u003eColorFabb CopperFill\u003c\/li\u003e\n\u003cli\u003eColorFabb WoodFill \u003cspan style=\"color: #990000;\"\u003e*** .5mm Nozzle ***\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eColorFabb BambooFill \u003cspan style=\"color: #990000;\"\u003e*** .5mm+ Nozzle ***\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eColorFabb XT, HT, nGen (Eastman Amphora)\u003c\/li\u003e\n\u003cli\u003eAll taulman Nylons and other Nylons\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003ePET, PETG, PET+\u003c\/li\u003e\n\u003cli\u003eFennerDrives NinjaFlex and SemiFlex\u003c\/li\u003e\n\u003cli\u003e...\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eSupport\u003c\/h5\u003e\n\u003ch3\u003eGeneral Support\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/\" target=\"_blank\" title=\"Support DyzeDesign\" rel=\"noopener noreferrer\"\u003eSupport DyzeDesign\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/dyzedesign.com\/shop\/kit\/kit-dyzend-x-dyzextruder-gt-1-75mm\/\" target=\"_blank\" title=\"Link to Dyze Design GT extruder\" rel=\"noopener noreferrer\"\u003eMore information about GT extruder\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"section mcb-section \" id=\"firmware\"\u003e\n\u003cdiv class=\"section_wrapper mcb-section-inner\"\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eFirmware modification\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzextruder-technical-support\/stepper-driver-adjustment\/#firmware\" target=\"_blank\" title=\"DyzeXtruder\" rel=\"noopener noreferrer\"\u003eDyzeXtruder\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-firmware-configuration\/\" target=\"_blank\" title=\"DyzEND\" rel=\"noopener noreferrer\"\u003eDyzEND-X\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eAssembly\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzextruder-technical-support\/dyzextruder-installation\/\" target=\"_blank\" title=\"DyzXtruder Assembly\" rel=\"noopener noreferrer\"\u003eDyzeXtruder Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-assembly\/\" target=\"_blank\" title=\"DyzEND Assembly\" rel=\"noopener noreferrer\"\u003eDyzEND-X Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-08-24T16:43:00-04:00","created_at":"2016-08-24T14:52:34-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Dyze Design","Extruder","Hotend"],"price":29900,"price_min":29900,"price_max":29900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24885406985,"title":"24volts","option1":"24volts","option2":null,"option3":null,"sku":"DYZ-KIT-NDX-XGT-24V","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DyzEND-X + DyzeXtruder GT Full Kit for 1.75mm - 24volts","public_title":"24volts","options":["24volts"],"price":29900,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":24885406921,"title":"12volts","option1":"12volts","option2":null,"option3":null,"sku":"DYZ-KIT-NDX-XGT-12V","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DyzEND-X + DyzeXtruder GT Full Kit for 1.75mm - 12volts","public_title":"12volts","options":["12volts"],"price":29900,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-1.jpg?v=1539828663","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-2.jpg?v=1539828663","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-3.jpg?v=1539828663","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-4.jpg?v=1539828663","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-5.jpg?v=1539828663","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-6.jpg?v=1539828663","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-7.jpg?v=1539828663","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-8.jpg?v=1539828663","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-9.jpg?v=1539828663"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-dyzextruder-gt-full-kit-for-1-75mm-1.jpg?v=1539828663","options":["Voltage"],"content":"\u003cp\u003e***You will have to make modification to the firmware for the 500°C thermistor. If you want we also sell the 300°C thermistor \u003ca href=\"\/collections\/extruders-and-hotends\/products\/300-c-thermistors\" target=\"_blank\" title=\"300-c-thermistors\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e. For more information about the modification go \u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-firmware-configuration\/\" title=\"dyzend-firmware-configuration\"\u003ehere\u003c\/a\u003e.***\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eThe \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eDyze Design DyzEND-X\u003c\/strong\u003e \u003c\/span\u003eis a Canadian made, high performance all metal hotend that is able to print materials at up to 500\u003cspan\u003e°C\u003c\/span\u003e (24V, e\u003c\/span\u003e\u003cspan style=\"line-height: 1.4;\"\u003enclosed print area\u003c\/span\u003e\u003cspan style=\"line-height: 1.4;\"\u003e).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe 410 stainless steel nozzle can handle the most abrasive materials like Carbon Fiber filled filaments in addition to being easy and affordable to replace when needed.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDyze Design GT Xtruder\u003c\/span\u003e\u003c\/strong\u003e is a Canadian made, high quality and all metal extruder that is able to print any kind of materials. So far, we've personally tried using the very flexible NinjaFlex and it works like a charm.\u003c\/p\u003e\n\u003cp\u003eThe DyzeXtruder is 100% metal, groove mount, liquid cooling and bowden tube ready.\u003c\/p\u003e\n\u003ch5\u003eHotend\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFULL METAL HOTEND\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1x 0.4 mm 410 stainless steel nozzle\u003c\/li\u003e\n\u003cli\u003eHard Titanium \u003cspan\u003ethermal break\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with every 1.75mm filaments\u003c\/li\u003e\n\u003cli\u003eUp to 500°C \u003cspan\u003e(24V, e\u003c\/span\u003e\u003cspan\u003enclosed print area\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eExtruder\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFully assembled and tested all metal extruder\u003c\/li\u003e\n\u003cli\u003eCompatible with every 1.75mm filaments\u003c\/li\u003e\n\u003cli\u003eDual Pinch drive\u003c\/li\u003e\n\u003cli\u003eMetal Reduction Gears for High pushing force of 9kg (20lbs)\u003c\/li\u003e\n\u003cli\u003eEasy filament insertion and removal\u003c\/li\u003e\n\u003cli\u003eSimple hotend swapping \u003c\/li\u003e\n\u003cli\u003eLiquid Cooling Ready\u003c\/li\u003e\n\u003cli\u003eAdjustable width to connect the most known RepRap hotends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncluded\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAll metal DyzEND-X Hotend\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1x 0.4 mm 410 stainless steel nozzle.\u003c\/li\u003e\n\u003cli\u003e40W Ceramic Heater Cartridge\u003c\/li\u003e\n\u003cli\u003eAssembly of high-temperature thermistors (500°C)\u003c\/li\u003e\n\u003cli\u003eAll metal DyzeXtruder GT\u003c\/li\u003e\n\u003cli\u003eCustom-made spring specifically designed for optimal strength\u003c\/li\u003e\n\u003cli\u003eNEMA 17x40 stepper motor - 0.9 deg - 1.68 A\u003c\/li\u003e\n\u003cli\u003e1 meter cable\u003c\/li\u003e\n\u003cli\u003eEvery needed bolts\/nuts\/etc.\u003c\/li\u003e\n\u003cli\u003e2 Allen Keys (2 mm, 2.5 mm).\u003c\/li\u003e\n\u003cli\u003e3x Conical Washers\u003c\/li\u003e\n\u003cli\u003e2x M4 Screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cp\u003eKnown compatible materials\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColorFabb CarbonFiber XT CF20\u003c\/li\u003e\n\u003cli\u003eOther Carbon Fiber filled materials\u003c\/li\u003e\n\u003cli\u003ePEEK\u003c\/li\u003e\n\u003cli\u003ePLA\u003c\/li\u003e\n\u003cli\u003eABS\u003c\/li\u003e\n\u003cli\u003ePC\u003c\/li\u003e\n\u003cli\u003ePC-ABS\u003c\/li\u003e\n\u003cli\u003eColorFabb BrassFill\u003c\/li\u003e\n\u003cli\u003eColorFabb BronzeFill\u003c\/li\u003e\n\u003cli\u003eColorFabb CopperFill\u003c\/li\u003e\n\u003cli\u003eColorFabb WoodFill \u003cspan style=\"color: #990000;\"\u003e*** .5mm Nozzle ***\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eColorFabb BambooFill \u003cspan style=\"color: #990000;\"\u003e*** .5mm+ Nozzle ***\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eColorFabb XT, HT, nGen (Eastman Amphora)\u003c\/li\u003e\n\u003cli\u003eAll taulman Nylons and other Nylons\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003ePET, PETG, PET+\u003c\/li\u003e\n\u003cli\u003eFennerDrives NinjaFlex and SemiFlex\u003c\/li\u003e\n\u003cli\u003e...\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eSupport\u003c\/h5\u003e\n\u003ch3\u003eGeneral Support\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/\" target=\"_blank\" title=\"Support DyzeDesign\" rel=\"noopener noreferrer\"\u003eSupport DyzeDesign\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/dyzedesign.com\/shop\/kit\/kit-dyzend-x-dyzextruder-gt-1-75mm\/\" target=\"_blank\" title=\"Link to Dyze Design GT extruder\" rel=\"noopener noreferrer\"\u003eMore information about GT extruder\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"section mcb-section \" id=\"firmware\"\u003e\n\u003cdiv class=\"section_wrapper mcb-section-inner\"\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eFirmware modification\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzextruder-technical-support\/stepper-driver-adjustment\/#firmware\" target=\"_blank\" title=\"DyzeXtruder\" rel=\"noopener noreferrer\"\u003eDyzeXtruder\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-firmware-configuration\/\" target=\"_blank\" title=\"DyzEND\" rel=\"noopener noreferrer\"\u003eDyzEND-X\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eAssembly\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzextruder-technical-support\/dyzextruder-installation\/\" target=\"_blank\" title=\"DyzXtruder Assembly\" rel=\"noopener noreferrer\"\u003eDyzeXtruder Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-assembly\/\" target=\"_blank\" title=\"DyzEND Assembly\" rel=\"noopener noreferrer\"\u003eDyzEND-X Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":3004078021,"title":"Dyze Design DyzeXtruder for 1.75 mm filaments","handle":"fully-assembled-dyzedesign-dyzextrudeur-for-1-75-mm-filaments","description":"\u003cp\u003eThe Dyze Design extruder is a Canadian made, high quality and all metal extruder that is able to print any kind of material. \u003cspan\u003eSo far, we've personally tried using the very flexible NinjaFlex and it works like a charm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe DyzeXtruder is 100% metal, groove mount and bowden tube ready.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFully assembled all metal extruder\u003c\/li\u003e\n\u003cli\u003eCompatible with every 1.75mm filaments\u003c\/li\u003e\n\u003cli\u003eAdjustable width to connect the most known RepRap hotends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncluded\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll metal DyzeXtruder\u003c\/li\u003e\n\u003cli\u003eCustom-made spring specifically designed for optimal strength\u003c\/li\u003e\n\u003cli\u003eNEMA 17x40 stepper motor - 0.9 deg - 1.68 A\u003c\/li\u003e\n\u003cli\u003e1 meter cable\u003c\/li\u003e\n\u003cli\u003eEvery needed bolts\/nuts\/etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eHotends\u003c\/h5\u003e\n\u003cp\u003eAdjustable width to connect the most known RepRap hotends.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hardware\/products\/dyzend-500-c-all-metal-high-performance-hotend-1-75-mm-filaments-12v\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDyzeDesign DyzEND 500°C All metal high performance hotend\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eJ-Head\u003c\/li\u003e\n\u003cli\u003eE3D\u003c\/li\u003e\n\u003cli\u003eHexagon\u003c\/li\u003e\n\u003cli\u003e...\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eSupport\u003c\/h5\u003e\n\u003ch3\u003eGeneral Support\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/\" target=\"_blank\" title=\"Support DyzeDesign\" rel=\"noopener noreferrer\"\u003eSupport DyzeDesign\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"section mcb-section \" id=\"firmware\"\u003e\n\u003cdiv class=\"section_wrapper mcb-section-inner\"\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eFirmware modification\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzextruder-technical-support\/stepper-driver-adjustment\/#firmware\" target=\"_blank\" title=\"DyzeXtruder\" rel=\"noopener noreferrer\"\u003eDyzeXtruder\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eAssembly\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzextruder-technical-support\/dyzextruder-installation\/\" target=\"_blank\" title=\"DyzXtruder Assembly\" rel=\"noopener noreferrer\"\u003eDyzeXtruder Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-11-20T10:09:00-05:00","created_at":"2015-11-20T10:58:29-05:00","vendor":"DyzeDesign","type":"Open Parts","tags":["3DPrinter parts","Extruder","RepRap"],"price":10500,"price_min":10500,"price_max":10500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8842675013,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-XTR-UDR-STD-175","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dyze Design DyzeXtruder for 1.75 mm filaments","public_title":null,"options":["Default Title"],"price":10500,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-dyzextruder-for-1-75-mm-filaments-1.jpg?v=1539828550","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-dyzextruder-for-1-75-mm-filaments-2.jpg?v=1539828550","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-dyzextruder-for-1-75-mm-filaments-3.jpg?v=1539828550","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-dyzextruder-for-1-75-mm-filaments-4.jpg?v=1539828550","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-dyzextruder-for-1-75-mm-filaments-5.png?v=1539828550"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-dyzextruder-for-1-75-mm-filaments-1.jpg?v=1539828550","options":["Title"],"content":"\u003cp\u003eThe Dyze Design extruder is a Canadian made, high quality and all metal extruder that is able to print any kind of material. \u003cspan\u003eSo far, we've personally tried using the very flexible NinjaFlex and it works like a charm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe DyzeXtruder is 100% metal, groove mount and bowden tube ready.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFully assembled all metal extruder\u003c\/li\u003e\n\u003cli\u003eCompatible with every 1.75mm filaments\u003c\/li\u003e\n\u003cli\u003eAdjustable width to connect the most known RepRap hotends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncluded\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll metal DyzeXtruder\u003c\/li\u003e\n\u003cli\u003eCustom-made spring specifically designed for optimal strength\u003c\/li\u003e\n\u003cli\u003eNEMA 17x40 stepper motor - 0.9 deg - 1.68 A\u003c\/li\u003e\n\u003cli\u003e1 meter cable\u003c\/li\u003e\n\u003cli\u003eEvery needed bolts\/nuts\/etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eHotends\u003c\/h5\u003e\n\u003cp\u003eAdjustable width to connect the most known RepRap hotends.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hardware\/products\/dyzend-500-c-all-metal-high-performance-hotend-1-75-mm-filaments-12v\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDyzeDesign DyzEND 500°C All metal high performance hotend\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eJ-Head\u003c\/li\u003e\n\u003cli\u003eE3D\u003c\/li\u003e\n\u003cli\u003eHexagon\u003c\/li\u003e\n\u003cli\u003e...\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eSupport\u003c\/h5\u003e\n\u003ch3\u003eGeneral Support\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/\" target=\"_blank\" title=\"Support DyzeDesign\" rel=\"noopener noreferrer\"\u003eSupport DyzeDesign\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"section mcb-section \" id=\"firmware\"\u003e\n\u003cdiv class=\"section_wrapper mcb-section-inner\"\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eFirmware modification\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzextruder-technical-support\/stepper-driver-adjustment\/#firmware\" target=\"_blank\" title=\"DyzeXtruder\" rel=\"noopener noreferrer\"\u003eDyzeXtruder\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eAssembly\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzextruder-technical-support\/dyzextruder-installation\/\" target=\"_blank\" title=\"DyzXtruder Assembly\" rel=\"noopener noreferrer\"\u003eDyzeXtruder Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":2994995141,"title":"DyzEND-X 500°C All metal hotend for 1.75mm","handle":"dyzend-500-c-all-metal-high-performance-hotend-1-75-mm-filaments-12v","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e***You will have to make modification to the firmware for the 500°C thermistor. If you want we also sell the 300°C thermistor \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"\/collections\/extruders-and-hotends\/products\/300-c-thermistors\" target=\"_blank\" title=\"300-c-thermistors\"\u003ehere\u003c\/a\u003e\u003cspan\u003e. For more information about the modification go \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-firmware-configuration\/\" title=\"dyzend-firmware-configuration\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003cspan\u003e.***\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dyze Design DyzEND-X is a Canadian made, high performance all metal hotend that is able to print materials at up to 500\u003cspan\u003e°\u003c\/span\u003eC \u003cspan\u003e(24V, e\u003c\/span\u003e\u003cspan\u003enclosed print area\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 410 stainless steel nozzle can handle the most abrasive materials like Carbon Fiber filled filaments in addition to being easy and affordable to replace when needed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFULL METAL HOTEND\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e0.4mm 410 stainless steel nozzle\u003c\/li\u003e\n\u003cli\u003eHard Titanium \u003cspan\u003ethermal break\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with every 1.75mm filaments\u003c\/li\u003e\n\u003cli\u003eUp to 500°C \u003cspan\u003e(24V, e\u003c\/span\u003e\u003cspan\u003enclosed print area\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eInclude\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eAll metal DyzEND-X Hotend\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e40W\/12V or 60W\/24V Ceramic Heater Cartridge\u003c\/li\u003e\n\u003cli\u003eAssembly of high-temperature thermistors (500°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cp\u003eKnown compatible materials\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColorFabb CarbonFiber XT CF20\u003c\/li\u003e\n\u003cli\u003eOther Carbon Fiber filled materials\u003c\/li\u003e\n\u003cli\u003ePEEK\u003c\/li\u003e\n\u003cli\u003ePLA\u003c\/li\u003e\n\u003cli\u003eABS\u003c\/li\u003e\n\u003cli\u003ePC\u003c\/li\u003e\n\u003cli\u003ePC-ABS\u003c\/li\u003e\n\u003cli\u003eColorFabb BrassFill\u003c\/li\u003e\n\u003cli\u003eColorFabb BronzeFill\u003c\/li\u003e\n\u003cli\u003eColorFabb CopperFill\u003c\/li\u003e\n\u003cli\u003eColorFabb WoodFill \u003cspan style=\"color: #990000;\"\u003e*** .5mm Nozzle ***\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eColorFabb BambooFill \u003cspan style=\"color: #990000;\"\u003e*** .5mm+ Nozzle ***\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eColorFabb XT (Eastman Amphora)\u003c\/li\u003e\n\u003cli\u003eAll taulman Nylons and other materials\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003ePET, PETG, PET+\u003c\/li\u003e\n\u003cli\u003eFennerDrives NinjaFlex and SemiFlex\u003c\/li\u003e\n\u003cli\u003e...\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSupport\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eGeneral Support\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/\" target=\"_blank\" title=\"Support DyzeDesign\"\u003eSupport DyzeDesign\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"section mcb-section \" id=\"firmware\"\u003e\n\u003cdiv class=\"section_wrapper mcb-section-inner\"\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eFirmware configuration for the DyzEND-X hotend\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-firmware-configuration\/\" target=\"_blank\" title=\"Firmware Configuration\"\u003eFirmware Configuration\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eAssembly\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-assembly\/\" target=\"_blank\" title=\"DyzEND Assembly\"\u003eDyzEND-X Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_image \"\u003e\n\u003cdiv class=\"image_frame image_item no_link scale-with-grid no_border\"\u003e\n\u003cdiv class=\"image_wrapper\"\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_image \"\u003e\n\u003cdiv class=\"image_frame image_item no_link scale-with-grid no_border\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-11-19T19:35:00-05:00","created_at":"2015-11-19T20:38:01-05:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Hardware","Hotend","RepRap parts"],"price":12900,"price_min":12900,"price_max":12900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17239767877,"title":"24volts","option1":"24volts","option2":null,"option3":null,"sku":"DYZ-HOT-NDX-500-24V","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DyzEND-X 500°C All metal hotend for 1.75mm - 24volts","public_title":"24volts","options":["24volts"],"price":12900,"weight":500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":17239736197,"title":"12volts","option1":"12volts","option2":null,"option3":null,"sku":"DYZ-HOT-NDX-500-12V","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DyzEND-X 500°C All metal hotend for 1.75mm - 12volts","public_title":"12volts","options":["12volts"],"price":12900,"weight":500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-500-c-all-metal-hotend-for-1-75mm-1.jpg?v=1539828539","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-500-c-all-metal-hotend-for-1-75mm-2.jpg?v=1539828539","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-500-c-all-metal-hotend-for-1-75mm-3.jpg?v=1539828539","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-500-c-all-metal-hotend-for-1-75mm-4.jpg?v=1539828539","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-500-c-all-metal-hotend-for-1-75mm-5.jpg?v=1539828539","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-500-c-all-metal-hotend-for-1-75mm-6.jpg?v=1539828539","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-500-c-all-metal-hotend-for-1-75mm-7.jpg?v=1539828539","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-500-c-all-metal-hotend-for-1-75mm-8.png?v=1539828539"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyzend-x-500-c-all-metal-hotend-for-1-75mm-1.jpg?v=1539828539","options":["Voltage"],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e***You will have to make modification to the firmware for the 500°C thermistor. If you want we also sell the 300°C thermistor \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"\/collections\/extruders-and-hotends\/products\/300-c-thermistors\" target=\"_blank\" title=\"300-c-thermistors\"\u003ehere\u003c\/a\u003e\u003cspan\u003e. For more information about the modification go \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-firmware-configuration\/\" title=\"dyzend-firmware-configuration\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003cspan\u003e.***\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dyze Design DyzEND-X is a Canadian made, high performance all metal hotend that is able to print materials at up to 500\u003cspan\u003e°\u003c\/span\u003eC \u003cspan\u003e(24V, e\u003c\/span\u003e\u003cspan\u003enclosed print area\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 410 stainless steel nozzle can handle the most abrasive materials like Carbon Fiber filled filaments in addition to being easy and affordable to replace when needed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFULL METAL HOTEND\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e0.4mm 410 stainless steel nozzle\u003c\/li\u003e\n\u003cli\u003eHard Titanium \u003cspan\u003ethermal break\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with every 1.75mm filaments\u003c\/li\u003e\n\u003cli\u003eUp to 500°C \u003cspan\u003e(24V, e\u003c\/span\u003e\u003cspan\u003enclosed print area\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eInclude\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eAll metal DyzEND-X Hotend\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e40W\/12V or 60W\/24V Ceramic Heater Cartridge\u003c\/li\u003e\n\u003cli\u003eAssembly of high-temperature thermistors (500°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cp\u003eKnown compatible materials\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColorFabb CarbonFiber XT CF20\u003c\/li\u003e\n\u003cli\u003eOther Carbon Fiber filled materials\u003c\/li\u003e\n\u003cli\u003ePEEK\u003c\/li\u003e\n\u003cli\u003ePLA\u003c\/li\u003e\n\u003cli\u003eABS\u003c\/li\u003e\n\u003cli\u003ePC\u003c\/li\u003e\n\u003cli\u003ePC-ABS\u003c\/li\u003e\n\u003cli\u003eColorFabb BrassFill\u003c\/li\u003e\n\u003cli\u003eColorFabb BronzeFill\u003c\/li\u003e\n\u003cli\u003eColorFabb CopperFill\u003c\/li\u003e\n\u003cli\u003eColorFabb WoodFill \u003cspan style=\"color: #990000;\"\u003e*** .5mm Nozzle ***\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eColorFabb BambooFill \u003cspan style=\"color: #990000;\"\u003e*** .5mm+ Nozzle ***\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eColorFabb XT (Eastman Amphora)\u003c\/li\u003e\n\u003cli\u003eAll taulman Nylons and other materials\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003ePET, PETG, PET+\u003c\/li\u003e\n\u003cli\u003eFennerDrives NinjaFlex and SemiFlex\u003c\/li\u003e\n\u003cli\u003e...\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSupport\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eGeneral Support\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/\" target=\"_blank\" title=\"Support DyzeDesign\"\u003eSupport DyzeDesign\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"section mcb-section \" id=\"firmware\"\u003e\n\u003cdiv class=\"section_wrapper mcb-section-inner\"\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eFirmware configuration for the DyzEND-X hotend\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-firmware-configuration\/\" target=\"_blank\" title=\"Firmware Configuration\"\u003eFirmware Configuration\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003ch3\u003eAssembly\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_visual \"\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/dyzedesign.com\/support\/dyzend-technical-support\/dyzend-assembly\/\" target=\"_blank\" title=\"DyzEND Assembly\"\u003eDyzEND-X Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_image \"\u003e\n\u003cdiv class=\"image_frame image_item no_link scale-with-grid no_border\"\u003e\n\u003cdiv class=\"image_wrapper\"\u003e\n\u003cdiv class=\"wrap mcb-wrap one clearfix\"\u003e\n\u003cdiv class=\"column mcb-column one column_image \"\u003e\n\u003cdiv class=\"image_frame image_item no_link scale-with-grid no_border\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":5494549765,"title":"300°C Thermistor","handle":"300-c-thermistors","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis NTC Thermistor assembly can read temperatures up to 300°C.\u003c\/p\u003e\n\u003cp\u003eCable length : 100 mm\u003c\/p\u003e","published_at":"2016-04-18T11:34:00-04:00","created_at":"2016-04-18T11:47:17-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":1095,"price_min":1095,"price_max":1095,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17270072517,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-THR-300-CEL-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"300°C Thermistor","public_title":null,"options":["Default Title"],"price":1095,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-300-c-thermistor-1.jpg?v=1539828618","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-300-c-thermistor-2.jpg?v=1539828618","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-300-c-thermistor-3.jpg?v=1539828618"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-300-c-thermistor-1.jpg?v=1539828618","options":["Title"],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis NTC Thermistor assembly can read temperatures up to 300°C.\u003c\/p\u003e\n\u003cp\u003eCable length : 100 mm\u003c\/p\u003e"}

{"id":5494510085,"title":"60W-24V DC : Heater Cartridge","handle":"60w-24v-dc-heater-cartridge","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eHigh quality stainless steel heating element, 24 V DC, 60W*\u003c\/p\u003e\n\u003cp\u003eLength of element: 21 mm\u003c\/p\u003e\n\u003cp\u003eDiameter of element: 6 mm\u003c\/p\u003e\n\u003cp\u003eLength of wires: 100 mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e*Value may vary according to manufacturer's specifications.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2016-04-18T11:23:00-04:00","created_at":"2016-04-18T11:29:47-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":600,"price_min":600,"price_max":600,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17269830533,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-HTC-60W-24V-6MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"60W-24V DC : Heater Cartridge","public_title":null,"options":["Default Title"],"price":600,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-60w-24v-dc-heater-cartridge-1.jpg?v=1539828612","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-60w-24v-dc-heater-cartridge-2.jpg?v=1539828612"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-60w-24v-dc-heater-cartridge-1.jpg?v=1539828612","options":["Title"],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eHigh quality stainless steel heating element, 24 V DC, 60W*\u003c\/p\u003e\n\u003cp\u003eLength of element: 21 mm\u003c\/p\u003e\n\u003cp\u003eDiameter of element: 6 mm\u003c\/p\u003e\n\u003cp\u003eLength of wires: 100 mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e*Value may vary according to manufacturer's specifications.\u003c\/span\u003e\u003c\/p\u003e"}

{"id":5494508677,"title":"45W 12V DC Heater Cartridge","handle":"45w-12v-dc-heater-cartridge","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eHigh quality stainless steel heating element, 12 V DC, 45W*\u003c\/p\u003e\n\u003cp\u003eElement length: 21 mm\u003c\/p\u003e\n\u003cp\u003eElement diameter: 6 mm\u003c\/p\u003e\n\u003cp\u003eWire length: 100 mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Tested one by one. Value may vary according to manufacturer's specifications. Min. 40 Watts.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2016-04-18T11:23:00-04:00","created_at":"2016-04-18T11:29:05-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":600,"price_min":600,"price_max":600,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17269824709,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-HTC-45W-12V-6MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"45W 12V DC Heater Cartridge","public_title":null,"options":["Default Title"],"price":600,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-45w-12v-dc-heater-cartridge-1.jpg?v=1539828608","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-45w-12v-dc-heater-cartridge-2.jpg?v=1539828608"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-45w-12v-dc-heater-cartridge-1.jpg?v=1539828608","options":["Title"],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eHigh quality stainless steel heating element, 12 V DC, 45W*\u003c\/p\u003e\n\u003cp\u003eElement length: 21 mm\u003c\/p\u003e\n\u003cp\u003eElement diameter: 6 mm\u003c\/p\u003e\n\u003cp\u003eWire length: 100 mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Tested one by one. Value may vary according to manufacturer's specifications. Min. 40 Watts.\u003c\/span\u003e\u003c\/p\u003e"}

{"id":5483895109,"title":"Dyze Design Hard Stainless Steel Nozzle Full Kit","handle":"dyze-design-hexa-nozzle-kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv\u003eFull set of hard stainless steel nozzle\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant. ( 24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360 )\u003c\/div\u003e\n\u003cdiv\u003eIt includes :\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1 x 0.2mm* ; 1 x 0.4mm ; 1 x 0.6 mm ; 1 x 0.8 mm ; 1x 1.0 mm ;  1 x 1.2 mm.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e7 x Sealing washer.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e * Not recommended for composite plastic.\u003c\/p\u003e","published_at":"2016-04-16T14:29:00-04:00","created_at":"2016-04-16T14:49:39-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":13000,"price_min":13000,"price_max":13000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17239047365,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-NOZ-SST-175-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dyze Design Hard Stainless Steel Nozzle Full Kit","public_title":null,"options":["Default Title"],"price":13000,"weight":44,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-full-kit-1.jpg?v=1539828593"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-full-kit-1.jpg?v=1539828593","options":["Title"],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv\u003eFull set of hard stainless steel nozzle\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant. ( 24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360 )\u003c\/div\u003e\n\u003cdiv\u003eIt includes :\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1 x 0.2mm* ; 1 x 0.4mm ; 1 x 0.6 mm ; 1 x 0.8 mm ; 1x 1.0 mm ;  1 x 1.2 mm.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e7 x Sealing washer.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e * Not recommended for composite plastic.\u003c\/p\u003e"}

{"id":5483991365,"title":"Dyze Design Hard Stainless Steel Nozzle 1.2 mm","handle":"design-hard-ss-nozzle-1-2-mm","description":"\u003cdiv\u003eHard Stainless Steel Nozzle : 1.2 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-04-16T14:53:00-04:00","created_at":"2016-04-16T15:16:23-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":2499,"price_min":2499,"price_max":2499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17239324677,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-NOZ-SST-175-120","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dyze Design Hard Stainless Steel Nozzle 1.2 mm","public_title":null,"options":["Default Title"],"price":2499,"weight":8,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-1-2-mm-1.jpg?v=1539828604"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-1-2-mm-1.jpg?v=1539828604","options":["Title"],"content":"\u003cdiv\u003eHard Stainless Steel Nozzle : 1.2 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":5483989253,"title":"Dyze Design Hard Stainless Steel Nozzle 1.0 mm","handle":"design-hard-ss-nozzle-1-0-mm","description":"\u003cdiv\u003eHard Stainless Steel Nozzle : 1.0 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-04-16T14:53:00-04:00","created_at":"2016-04-16T15:15:47-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":2499,"price_min":2499,"price_max":2499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17239322117,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-NOZ-SST-175-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dyze Design Hard Stainless Steel Nozzle 1.0 mm","public_title":null,"options":["Default Title"],"price":2499,"weight":8,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-1-0-mm-1.jpg?v=1539828603"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-1-0-mm-1.jpg?v=1539828603","options":["Title"],"content":"\u003cdiv\u003eHard Stainless Steel Nozzle : 1.0 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":5483986757,"title":"Dyze Design Hard Stainless Steel Nozzle 0.8 mm","handle":"design-hard-ss-nozzle-0-8-mm","description":"\u003cdiv\u003eHard Stainless Steel Nozzle : 0.8 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-04-16T14:53:00-04:00","created_at":"2016-04-16T15:15:19-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":2499,"price_min":2499,"price_max":2499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17239318917,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-NOZ-SST-175-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dyze Design Hard Stainless Steel Nozzle 0.8 mm","public_title":null,"options":["Default Title"],"price":2499,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-0-8-mm-1.jpg?v=1539828600"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-0-8-mm-1.jpg?v=1539828600","options":["Title"],"content":"\u003cdiv\u003eHard Stainless Steel Nozzle : 0.8 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":5483983877,"title":"Dyze Design Hard Stainless Steel Nozzle 0.6 mm","handle":"dyze-design-hard-ss-nozzle-0-6-mm","description":"\u003cdiv\u003eHard Stainless Steel Nozzle : 0.6 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-04-16T14:53:00-04:00","created_at":"2016-04-16T15:14:37-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":2499,"price_min":2499,"price_max":2499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17239315461,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-NOZ-SST-175-060","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dyze Design Hard Stainless Steel Nozzle 0.6 mm","public_title":null,"options":["Default Title"],"price":2499,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-0-6-mm-1.jpg?v=1539828599"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-0-6-mm-1.jpg?v=1539828599","options":["Title"],"content":"\u003cdiv\u003eHard Stainless Steel Nozzle : 0.6 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":5483962949,"title":"Dyze Design Hard Stainless Steel Nozzle 0.4 mm","handle":"hard-ss-nozzle-0-4-mm","description":"\u003cdiv\u003eHard Stainless Steel Nozzle : 0.4 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-04-16T14:53:00-04:00","created_at":"2016-04-16T15:09:46-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":2499,"price_min":2499,"price_max":2499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17239219077,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-NOZ-SST-175-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dyze Design Hard Stainless Steel Nozzle 0.4 mm","public_title":null,"options":["Default Title"],"price":2499,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-0-4-mm-1.jpg?v=1539828597"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-0-4-mm-1.jpg?v=1539828597","options":["Title"],"content":"\u003cdiv\u003eHard Stainless Steel Nozzle : 0.4 mm\u003c\/div\u003e\n\u003cdiv\u003ePerfect for all types of filaments\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":5483959941,"title":"Dyze Design Hard Stainless Steel Nozzle 0.2 mm","handle":"hard-ss-nozzle-0-2-mm","description":"\u003cdiv\u003eHard Stainless Steel Nozzle : 0.2 mm\u003c\/div\u003e\n\u003cdiv\u003eThis nozzle is perfect for high precision\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant. (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e* Not recommended for composites plastic.\u003c\/p\u003e","published_at":"2016-04-16T14:53:00-04:00","created_at":"2016-04-16T15:09:05-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":2499,"price_min":2499,"price_max":2499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17239212677,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-NOZ-SST-175-020","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dyze Design Hard Stainless Steel Nozzle 0.2 mm","public_title":null,"options":["Default Title"],"price":2499,"weight":8,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-0-2-mm-1.jpg?v=1539828595"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-hard-stainless-steel-nozzle-0-2-mm-1.jpg?v=1539828595","options":["Title"],"content":"\u003cdiv\u003eHard Stainless Steel Nozzle : 0.2 mm\u003c\/div\u003e\n\u003cdiv\u003eThis nozzle is perfect for high precision\u003c\/div\u003e\n\u003cdiv\u003eMade of hard stainless steel\u003c\/div\u003e\n\u003cdiv\u003eWear-resistant. (24 X more resistant than aluminum 6061T6 and 12 X more resistant than brass C360)\u003c\/div\u003e\n\u003cp\u003e* Not recommended for composites plastic.\u003c\/p\u003e"}

{"id":5483699909,"title":"Dyze Design Bowden upgrade kit","handle":"dyze-design-bowden-upgrade-kit","description":"\u003cdiv\u003eBowden Tube and connector kit\u003c\/div\u003e\n\u003cdiv\u003eIt includes:\u003c\/div\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Push fit.\u003c\/li\u003e\n\u003cli\u003e1x 625mm PTFE tube (ID = 2mm for 1.75mm filament. ED = 3.2mm).\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2016-04-16T13:40:00-04:00","created_at":"2016-04-16T13:55:15-04:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hardware"],"price":999,"price_min":999,"price_max":999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17238450885,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-BOW-DEN-UPG-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dyze Design Bowden upgrade kit","public_title":null,"options":["Default Title"],"price":999,"weight":20,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-bowden-upgrade-kit-1.jpg?v=1539828591"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-dyze-design-bowden-upgrade-kit-1.jpg?v=1539828591","options":["Title"],"content":"\u003cdiv\u003eBowden Tube and connector kit\u003c\/div\u003e\n\u003cdiv\u003eIt includes:\u003c\/div\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Push fit.\u003c\/li\u003e\n\u003cli\u003e1x 625mm PTFE tube (ID = 2mm for 1.75mm filament. ED = 3.2mm).\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8575087817,"title":"500°C Thermistor","handle":"500-c-thermistor","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis NTC Thermistor assembly can read up to 500°C.\u003c\/p\u003e\n\u003cp\u003eCable length : 100 mm\u003c\/p\u003e","published_at":"2016-04-18T11:34:00-04:00","created_at":"2016-12-14T11:35:48-05:00","vendor":"DyzeDesign","type":"Open Parts","tags":["Extruder","Hotend"],"price":3195,"price_min":3195,"price_max":3195,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28569148233,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DYZ-THR-500-CEL-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"500°C Thermistor","public_title":null,"options":["Default Title"],"price":3195,"weight":100,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-500-c-thermistor-1.jpg?v=1539829004","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-500-c-thermistor-2.jpg?v=1539829004","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-500-c-thermistor-3.jpg?v=1539829004"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-500-c-thermistor-1.jpg?v=1539829004","options":["Title"],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis NTC Thermistor assembly can read up to 500°C.\u003c\/p\u003e\n\u003cp\u003eCable length : 100 mm\u003c\/p\u003e"}

{"id":2024334327926,"title":"The Olsson Ruby 0.60mm Nozzle","handle":"the-olsson-ruby-0-60mm-nozzle","description":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.60mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e","published_at":"2017-07-31T13:30:28-04:00","created_at":"2018-08-22T12:02:20-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["Hardware","Hotend","mk2","mk2s"],"price":12300,"price_min":12300,"price_max":12300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18916571873398,"title":"1.75mm","option1":"1.75mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-175-060","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"The Olsson Ruby 0.60mm Nozzle - 1.75mm","public_title":"1.75mm","options":["1.75mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050186"},{"id":18916571906166,"title":"2.85mm","option1":"2.85mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-285-060","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"The Olsson Ruby 0.60mm Nozzle - 2.85mm","public_title":"2.85mm","options":["2.85mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"7350089050179"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-1.jpg?v=1539829475","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-2.jpg?v=1539829475","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-3.jpg?v=1539829475","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-4.jpg?v=1539829475"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-60mm-nozzle-1.jpg?v=1539829475","options":["Filament diameter"],"content":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.60mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e"}

{"id":10200505545,"title":"E3D v6 Hardened Steel Nozzle 0.40mm","handle":"e3d-v6-hardened-steel-nozzle-040mm","description":"\u003cp\u003eThis original E3D hardened steel nozzle is wear-resistant when using abrasive materials like Glowfill and carbon fiber-infused filament. Compatible with E3D v6 hotends (as found on the \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\" title=\"Original Prusa i3 MK3S 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eOriginal Prusa i3 MK3S\u003c\/a\u003e 3D printer).\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-12-13T14:23:34-05:00","created_at":"2017-08-01T15:47:04-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["1.75mm","Hotend","mk2","mk2s","mk3","nozzle","steel"],"price":2999,"price_min":2999,"price_max":2999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42293301065,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOZ-E3D-HST-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D v6 Hardened Steel Nozzle 0.40mm","public_title":null,"options":["Default Title"],"price":2999,"weight":100,"compare_at_price":null,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-original-e3d-hardened-steel-nozzle-0-40mm-1.jpeg?v=1549418709"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-original-e3d-hardened-steel-nozzle-0-40mm-1.jpeg?v=1549418709","options":["Title"],"content":"\u003cp\u003eThis original E3D hardened steel nozzle is wear-resistant when using abrasive materials like Glowfill and carbon fiber-infused filament. Compatible with E3D v6 hotends (as found on the \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\" title=\"Original Prusa i3 MK3S 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eOriginal Prusa i3 MK3S\u003c\/a\u003e 3D printer).\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":2024382201974,"title":"The Olsson Ruby 0.80mm Nozzle","handle":"the-olsson-ruby-0-80mm-nozzle","description":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.80mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e","published_at":"2017-07-31T13:30:28-04:00","created_at":"2018-08-22T12:17:51-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["Hardware","Hotend","mk2","mk2s"],"price":12300,"price_min":12300,"price_max":12300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18916830904438,"title":"1.75mm","option1":"1.75mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-175-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"The Olsson Ruby 0.80mm Nozzle - 1.75mm","public_title":"1.75mm","options":["1.75mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050186"},{"id":18916830937206,"title":"2.85mm","option1":"2.85mm","option2":null,"option3":null,"sku":"VRK-NOZ-RUB-285-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"The Olsson Ruby 0.80mm Nozzle - 2.85mm","public_title":"2.85mm","options":["2.85mm"],"price":12300,"weight":200,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350089050179"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-1.jpg?v=1539829484","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-2.jpg?v=1539829484","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-3.jpg?v=1539829484","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-4.jpg?v=1539829484"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-the-olsson-ruby-0-80mm-nozzle-1.jpg?v=1539829484","options":["Filament diameter"],"content":"\u003cp\u003eMeet the Olsson Ruby nozzle, and the five good reasons for you to upgrade to the hardest nozzle there is :\u003c\/p\u003e\n\u003ch3\u003eOne nozzle\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE\/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.\u003c\/p\u003e\n\u003ch3\u003eHighly wear resistant\u003c\/h3\u003e\n\u003cp\u003eThe ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B\u003csub\u003e4\u003c\/sub\u003eC), the third hardest known material in the world.\u003c\/p\u003e\n\u003ch3\u003eExcellent heat conductivity\u003c\/h3\u003e\n\u003cp\u003eSince most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.\u003c\/p\u003e\n\u003ch3\u003eVerified performance\u003c\/h3\u003e\n\u003cp\u003ePeople all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eManufacturing quality\u003c\/h3\u003e\n\u003cp\u003eThe Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/ultimaker-2-plus-3d-printer\" target=\"_blank\" title=\"Ultimaker 2+ 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003eUltimaker 2+\u003c\/a\u003e, \u003ca href=\"\/products\/original-reprap-prusa-i3-mk2-diy-kit\" target=\"_blank\" title=\"Prusa i3 MK2 3D printer at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK2\u003c\/a\u003e, Lulzbot, Makerbot, E3D v4, v5 and v6 hotends, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/olssonruby.com\/compatibility\/#compatibility_list\" target=\"_blank\" title=\"Olsson Ruby Compatibility List\" rel=\"noopener noreferrer\"\u003eView for the full compatibility list and notes.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the variant (1.75mm \/ 2.85mm) according to the diameter of filament your printer uses.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.80mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eMake sure to carefully read the \u003ca href=\"http:\/\/support.3dverkstan.se\/article\/66-the-olsson-ruby-instructions-for-use\" title=\"The Olsson Ruby Instructions for use at 3DVerkstan\"\u003emanufacturer's instructions\u003c\/a\u003e before mounting your Olsson Ruby!\u003c\/p\u003e"}