$19.99 $27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$12.99
*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY CANADA POST EXPEDITED PARCEL. Any order containing this product with any other services will be cancelled or shipped with Canada Post expedited parcel anyway *** The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directl...
$9.99
The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! Unlike its sibling the 3DLAC Spray, this bottle...
$9.99
0.40mm brass nozzle for E3D v6 hotends. Specs Material :Â Brass Opening diameter :Â 0.40mm Filament diameter :Â 1.75mm Thread :Â M6
$14.99
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5  This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm  To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)  *** -> Hacking t-glase to look more like glass! <- ***  XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels...
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+
$7.94
Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs)  Specifications: Connector: Molex 5057-9402 Cable length: 650 mm  To correctly install this replacement part, visit the Prusa Research knowledge base at hel...
$24.99
Meet the new Materio3D Regular PLA filament! Materio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA. - It prints exceptionally well and the final print result is of high quality.- This filament is stiff but a little more brittle than Materio3D's Tough PLA. - It is the most economical filament in the PLA range...
$83.84
The recommended filament to use with your Ultimaker 3D printer. The Ultimaker PLA (polylactic acid) is made of organic and renewable resources. Easy to use and produces a good surface finish for a variety of 3D printing projects, no matter your skill level. Diameter : 2.85mm Color :Â Transparent, Pearl White, White, Silver Metallic, Black, Orange...
$7.49
These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.Made of a heat-resistant, non-stick silicone material our sock will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled ...
$29.99
Materio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance. Diameter : 1.75mm Color: Rockies Cold White, Atlas Coal Black, Montréal Roadworks Orange
Â
The Ultimaker S5 Pro Bundle includes:
The top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more!Â
With the PRO Bundle, you have automatic material handling, efficient air filtering, and filament humidity control.
Active bed leveling ensures a perfect first layer, a closed front controls
airflow, and a filament flow sensor will pause your print and notify you if
you run out of material. Trust the S5 to do its job while you do yours.
The Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE, and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.
All new purchases of Ultimaker printers come with Ultimaker Essentials A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.
3 hours of free training at Voxel Factory.
Pro Bundle Assembled dimensions: 495 x 500 x 1197Â mm (19.5 x 19.5 x 47.1 inches)Â Â
Physical Dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in)
Dimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)
Net weight: 3.6kg
Filter technology: EPA E10 filter
Fan technology: low-noise brushless fan
Air refresh rate: 1 - 50 m³/h (35 m³/h nominal rate for most materials at 23°C)
Filter replacement is recommended every 1500 print hours (approx. 1 year)
Operating sound: less than 51 dBA (including Ultimaker S5)
Compatible printer: Ultimaker S5
Data / power connection: UMB connection (included)
Compatible materials: Optimized for Ultimaker materials, 3rd party materials also supported.