$19.99 $27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$12.99
*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY CANADA POST EXPEDITED PARCEL. Any order containing this product with any other services will be cancelled or shipped with Canada Post expedited parcel anyway *** The polyvalent adhesion solution for your 3D printing needs. Use withย blue painter's tapeย on a cold print bed, or directl...
$9.99
The polyvalent adhesion solution for your 3D printing needs. Use withย blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures.ย Useful for printing PLA, ABS, polycarbonate,ย PETG, copolyester, and more! Unlike its sibling the 3DLAC Spray, this bottle...
$9.99
0.40mm brass nozzle for E3D v6 hotends. Specs Material :ย Brass Opening diameter :ย 0.40mm Filament diameter :ย 1.75mm Thread :ย M6
$14.99
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5 ย This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm ย To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.) ย *** -> Hacking t-glase to look more like glass! <- *** ย XTC-3Dยฎ is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels...
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+
$7.94
Replacement heatbed thermistor set for theย Original Prusaย MK2/S, MK2.5/S,ย MK3/S/+ย andย MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) ย Specifications: Connector: Molex 5057-9402 Cable length: 650 mm ย To correctly install this replacement part, visit the Prusa Research knowledge base atย hel...
$24.99
Meet the new Materio3D Regular PLA filament! Materio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA. - It prints exceptionally well and the final print result is of high quality.- This filament is stiff but a little more brittle than Materio3D's Tough PLA. - It is the most economical filament in the PLA range...
$83.84
The recommended filament to use with your Ultimaker 3D printer. The Ultimaker PLA (polylactic acid) is made of organic and renewable resources. Easy to use and produces a good surface finish for a variety of 3D printing projects, no matter your skill level. Diameter : 2.85mm Color :ย Transparent, Pearl White, White, Silver Metallic, Black, Orange...
$7.49
These socks will keep your nozzle clean and free of burnt on blackened plastic. They donโt just keep the nozzle clean, but also keep heat inside the hotend, and off the print.Made of a heat-resistant, non-stick silicone material our sock will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled ...
$29.99
Materio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance. Diameter : 1.75mm Color: Rockies Cold White, Atlas Coal Black, Montrรฉal Roadworks Orange
Suitable for Bambu Lab A1, X1 & P1 series
Side 1: Smooth PEI Plate
Side 2: Smooth PEI Plate
The use of a specially selected matte PEI sheet can impart a smooth and matte texture to the bottom surface of the printed object, enhancing its overall appearance.
PEI enables printing not only with common materials such as PLA, TPU, PETG, but also with materials that require high temperatures like ABS and Nylon.
Note: Please apply glue to prevent the sheet from tearing if printing with filaments other than PLA.
The Bambu Smooth PEI Plate features a 0.5mm-thick spring steel plate that enhances magnetic adhesion. This helps to prevent warping and ensure optimal print quality during 3D printing. It also helps when printing larger models with materials that are prone to warping such as ABS, PC, and Nylon.
Please note thatย other slicer settings might need to be adjusted based on the printed model and the filament requirements
| Materials | Heatbed Temperature | Glue Stick Required? |
| PLA/PLA-CF/PLA-GF | 45~60โ | No |
| PETG/PETG-CF | 60~80โ | Glue Stick/Liquid Glue |
| ABS (not for A1 mini) | 90~100โ | Glue Stick/Liquid Glue |
| ASA (not for A1 mini) | 90~100โ | Glue Stick/Liquid Glue |
| TPU | 35~45โ | Glue Stick/Liquid Glue |
| PVA | 45~60โ | Glue Stick/Liquid Glue |
| PC/PC-CF (not for A1 mini) | 90~110โ | Glue Stick |
| PA/PA-CF/PAHT-CF (not for A1 mini) | 90~110โ | Glue Stick |
| PET-CF (not for A1 mini) | 80~100โ | Glue Stick/Liquid Glue |
Step 1:ย Align the plate with the fixed points of the platform with the name of the plate facing you
Step 2:ย Lower the plate and secure to the magnetic platform
| Material | Smooth PEI Sheet + Magnetic Spring Steel Plate |
| Surface Temperature Resistance | Up to 120โ |
| Thickness | Smooth PEI Sheet - 0.125mm Spring Steel Plate - 0.5mm/0.4mm |
| Usable Print Size | 256*256mm 180*180mm |
| Packaging Size | 300*270*17mm 220*190*15mm |
| Packaging Weight | 0.45kg 0.23kg |