$13.99
Overview The PTFE Tube Coupler is used to secure the PTFE tube and connect the PTFE tube between the buffer and the tool head. Installation Learn more about the H2 PTFE Tube Coupler on Bambu Lab Wiki. In the Box - H2 PTFE Tube Coupler*1 - BT3-5 Screw*1 Compatibility H2 Series Specifications Product Specifications Materials Plastic, Met...
$53.99
Overview Laser Protective Goggles are highly effective in preventing accidental eye injuries caused by the laser of the H2D Laser and H2S Laser module. For lasers with wavelengths ranging from 200 to 460 nm, including the 450 nm specification blue light (covering 450-460 nm) (the H2D Laser and H2S Laser emits a blue laser at 455 nm), the pr...
$79.99
High Z-axis Precision Printing The use of a Smooth PEI Plate contributes to improved Z-axis precision during the printing process, ensuring greater accuracy and consistency in the vertical dimension. These qualities make the Smooth PEI Plate an excellent choice for printing parts that demand a high level of fit accuracy, where precise ali...
$79.99
Excellent First-layer Adhesion and Improved Durability After optimizing the manufacturing process of the Bambu Texture PEI Plate, the durability of the plate is enhanced. Additionally, the adhesion between the prints and the plate is significantly improved, eliminating the need for adhesives. *In some situations, glue is required for v...
$32.99
Overview The Cutting Platform is a steel plate with StrongGrip Cutting Mat and LightGrip Cutting Mat attached, used to secure materials and provide a stable cutting surface. Installation Learn more about the Cutting Platform on Bambu Lab Wiki. In the Box - Cutting Platform*1 Compatibility H2D Laser Product Specifications ...
$134.00
Bambu Lab Vision Encoder – Accuracy To A New Level Take your 3D printing accuracy to the next level with the Bambu Lab Vision Encoder. This advanced calibration tool enhances motion accuracy to below 50μm, compensating for natural mechanical variances and long-term wear across machines. This calibration is distance-independent, ensuring consis...
$92.99
Overview The Laser Base serves as the working platform for laser engraving/cutting. It works with support strips to hold engraving/cutting materials, limit flames and smoke generated during the process, and collect debris produced during operation. Installation Learn more about the Laser Base on Bambu Lab Wiki. In the Box - Laser Base*...
$4.99
Overview The Silicone Sock for Hotend, crafted from high-quality silicone, offers superior temperature resistance. It ensures excellent thermal insulation and tear resistance, protecting the nozzle from cooling air and plastic adhesion. Installation Learn more about Silicone Sock for Hotend on Bambu Lab Wiki. In the Box - Silicone Sock...
$24.99
Quick Swap Nozzle Design The special design of H2 Series hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. Simply unlock the latch for quick and easy hotend removal and installation. *Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower sec...
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints with extensive infills.
1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.
PLA Basic | PLA Matte | PETG HF | |
Bambu Hardened Steel Nozzle (0.4mm) | 24 mm³/s | 28 mm³/s | 24 mm³/s |
Bambu High Flow Nozzle (0.4mm) | 40 mm³/s | 48 mm³/s | 32 mm³/s |
Bambu High Flow Nozzle (0.6mm) | 40 mm³/s | 40 mm³/s | 40 mm³/s |
Bambu High Flow Nozzle (0.8mm) | 40 mm³/s | 40 mm³/s | 40 mm³/s |
Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu's high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time.
Upgrade now and print faster without compromise!
H2 Series | X1/P1 Series | A1 Series |
Supported | Not Supported | Supported* |
*Bambu High Flow Nozzle is compatible with A1 Series, but it will not improve volumetric speed. In other words, the High Flow Nozzle performs the same as a standard nozzle on the A1 Series.
Filament | 0.4 mm High Flow Hardened Steel |
0.6 mm High Flow Hardened Steel |
0.8 mm High Flow Hardened Steel |
PLA Basic | √ | √ | √ |
PLA Matte | √ | √ | √ |
PLA Basic Gradient | √ | √ | √ |
PLA Silk+ | √ | √ | √ |
PLA Silk Dual Color | √ | √ | √ |
PLA Silk | √ | √ | √ |
PLA Metal | √ | √ | √ |
PLA Marble | √ | √ | √ |
PLA Sparkle | √ | √ | √ |
PLA Wood | √ | √ | √ |
PLA Galaxy | √ | √ | √ |
PLA Glow | √ | √ | √ |
PLA-CF | Not recommended | √ | √ |
PLA Aero | √ | √ | √ |
PETG HF | √ | √ | √ |
PETG Translucent | √ | √ | √ |
PETG-CF | Not recommended | √ | √ |
ABS | √ | √ | √ |
ABS-GF | √ | √ | √ |
ASA | √ | √ | √ |
ASA Aero | √ | √ | √ |
ASA-CF | Not recommended | √ | √ |
PC | √ | √ | √ |
PC FR | √ | √ | √ |
TPU for AMS | √ | √ | √ |
TPU 95A HF | √ | √ | √ |
TPU 85A | X | X | X |
TPU 90A | X | X | X |
PAHT-CF | Not recommended | √ | √ |
PET-CF | √ (Only for Left Hotend) | √ (Only for Left Hotend) | √ (Only for Left Hotend) |
PA6-CF | Not recommended | √ | √ |
PPA-CF | √ (Only for Left Hotend) | √ (Only for Left Hotend) | √ (Only for Left Hotend) |
PPS-CF | √ (Only for Left Hotend) | √ (Only for Left Hotend) | √ (Only for Left Hotend) |
Support for ABS | √ | √ | √ |
Support for PLA/PETG | √ | √ | √ |
Support for PA/PET | √ | √ | √ |
Support for PLA (New Version) | √ | √ | √ |
PVA | √ | √ | √ |
PA6-GF | Not recommended | √ | √ |
*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.
High Flow Hotend |
High Flow Hotend with hardened steel nozzle - [Selected Hotend Size] * 1 |
Max. Printing Temp. | 350 ℃ | Length | 49.2 mm |
Packaging Weight | 0.028 kg | Packaging Size | 60*60*30mm |