$25.99
PolyTerra PLA: this is Polymaker next-generation PLA filament, featuring improved printing quality, speed, and reliability while retaining all the nice attributes of PLA. Polymaker also introduced several innovations to make the product much more environmentally sustainable. It is a sustainable product sourced naturally and for every spool produ...
$27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$9.99
The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! *** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED ...
$27.99
PolyLite PETG by Polymaker is a high-quality PETG filament offering balanced mechanical properties and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : Clear, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PETG filament. Click...
$9.99
The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! Unlike its sibling the 3DLAC Spray, this bottle...
$9.99
0.40mm brass nozzle for E3D v6 hotends. Specs Material :Â Brass Opening diameter :Â 0.40mm Filament diameter :Â 1.75mm Thread :Â M6
$13.27
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5  This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm  To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)  *** -> Hacking t-glase to look more like glass! <- ***  XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels...
$31.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : bronze, silver, gold, lime, blue and magenta Technical Data Sheet Click here to download the Technical Data Sheet for the PolyLite Silk PLA filament.
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+ / MINI
$7.94
Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs)  Specifications: Connector: Molex 5057-9402 Cable length: 650 mm  To correctly install this replacement part, visit the Prusa Research knowledge base at hel...
$24.99
Meet the new Materio3D Regular PLA filament! Materio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA. - It prints exceptionally well and the final print result is of high quality.- This filament is stiff but a little more brittle than Materio3D's Tough PLA. - It is the most economical filament in the PLA range...
Easy to use and versatile, it's the best PETG on the market for Ultimaker 3D printers. Properties including good printability, toughness, chemical resistance, wear resistance, and temperature resistance make Ultimaker PETG suitable for a wide range of applications.
Ultimaker PETG sets the standard for enterprise-grade industrial use, with key benefits including:
Good adhesion and preconfigured print profiles mean anyone can quickly and easily achieve first-time-right results
Compared to PLA and Tough PLA, Ultimaker PETG unlocks the widest range of technical applications – ideal for industrial parts, tools, and prototypes
One of the most affordable technical 3D printing materials with a good mix of properties, Ultimaker PETG is easy to standardize the printing process across your organization
Â
Diameter: 2.85mm
Color: Transparent, White, Grey, Silver, Black, Orange, Yellow, Fluorescent Yellow, Green, Translucent Green, Blue, Translucent Blue, Red and Translucent Red
Ultimaker PETG can be printed on the Ultimaker S5 and Ultimaker S3 using an AA print core, and on the Ultimaker 2+ Connect printers . On other Ultimaker 3D printers, you may use this material experimentally, although no official print profiles are supplied.
PETG prints at nozzle temperatures between 225°C and 245°C. Depending on the selected profile in Ultimaker Cura there are small differences in the nozzle temperatures. These have been optimized to print properly with the selected print core size and layer height profile. The build plate temperature is set to 85 °C for reliable adhesion. These temperatures are the same for the Ultimaker S5, Ultimaker S3, and Ultimaker 2+ Connect.
Adhesion: Recommended to use Ultimaker adhesion sheets, or 3Dlac or Magigoo products