{"id":4544623935606,"title":"E3D v6 Gold Hotend KIT 24V 1.75mm","handle":"e3d-v6-gold-hotend-kit-24v-1-75mm","description":"\u003cp\u003e\u003cstrong\u003ePlease see the notes below to install this hotend on a Prusa i3 MK3\/S.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe third anniversary edition of the famed E3D v6 Hotend, featuring a gold-anodized heat sink and high-end components.\u003c\/p\u003e\n\u003cp\u003eThis hotend for 1.75mm filament comes AS A KIT (assembled version can be found \u003ca href=\"\/products\/e3d-v6-gold-hotend-24v-1-75mm\" target=\"_blank\" title=\"E3D v6 Gold Hotend assembled\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), with a 0.40mm hardened steel nozzle, high-precision heater cartridge and thermistor.\u003c\/p\u003e\n\u003cp\u003eFeatures :\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGold anodized heat sink\u003c\/li\u003e\n\u003cli\u003eEngraved, plated copper-alloy heater block, increases heat transfer and reduces material adhesion.\u003c\/li\u003e\n\u003cli\u003eHardened steel 0.40mm nozzle, ready for abrasive material printing.\u003c\/li\u003e\n\u003cli\u003eHigh-precision, quick-release heater cartridge (24V 30W 1.25A)\u003c\/li\u003e\n\u003cli\u003eClear fan-duct, to let the gold heat sink show through\u003c\/li\u003e\n\u003cli\u003eHigh Tolerance Capricorn PTFE Tubing, for smooth accurate extrusion.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe box also includes the following :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30mm x 30mm x 10mm 24V clear fan\u003c\/li\u003e\n\u003cli\u003e2 connector cables\u003c\/li\u003e\n\u003cli\u003e1 fibreglass insulated heater connector cable\u003c\/li\u003e\n\u003cli\u003e1 silicone sock\u003c\/li\u003e\n\u003cli\u003e1 thermal compound sachet\u003c\/li\u003e\n\u003cli\u003e1 fixings kit (screws, washers, hex wrench keys)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor installation on a Prusa i3 MK3\/S :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou'll need the \u003ca href=\"\/products\/replacement-prusa-i3-mk3-hotend-heatbreak\" target=\"_blank\" title=\"Prusa i3 MK3\/S heatbreak by E3D\" rel=\"noopener noreferrer\"\u003ePrusa-specific heatbreak\u003c\/a\u003e (especially if you're going to use the MMU2S). \u003cspan\u003eConsider re-using your current Prusa heabreak, or get a new one (available as an accessory).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe included heater cartridge has a lower power and shorter cable length than the \u003ca href=\"\/products\/replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3\" target=\"_blank\" title=\"Prusa i3 MK3\/S heater cartridge 40W 24V by E3D\" rel=\"noopener noreferrer\"\u003estandard Prusa heater cartridge\u003c\/a\u003e (30W vs 40W). Consider re-using your current Prusa heater cartridge, or get a new one (available as an accessory).\u003c\/li\u003e\n\u003cli\u003eThe included thermistor has a shorter cable and different connector than the \u003ca href=\"\/products\/replacement-thermistor-for-prusa-i3-mk2\" target=\"_blank\" title=\"Prusa i3 MK3\/S hotend thermistor by E3D\" rel=\"noopener noreferrer\"\u003estandard Prusa thermistor\u003c\/a\u003e. Consider re-using your current thermistor, or get a new one (available as an accessory).\u003c\/li\u003e\n\u003cli\u003eThe PTFE tube provided by Prusa are \u003ca href=\"https:\/\/manual.prusa3d.com\/Guide\/How+to+trim+PTFE+tube+-+Original+Prusa+i3+printers\/500\" target=\"_blank\" title=\"How to trim PTFE tube guide at prusa3d.com\" rel=\"noopener noreferrer\"\u003ecut, trimmed and chamfered\u003c\/a\u003e to spec for the MK3 or the MK3S. Consider re-using your existing PTFE tube, follow the above guide to cut the Capricorn tube, or get a new one (available as an accessory).\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-07-15T17:08:07-04:00","created_at":"2020-07-15T17:05:00-04:00","vendor":"E3D","type":"Open Parts","tags":[],"price":13999,"price_min":13999,"price_max":13999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31926513336438,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-HOT-GLD-KIT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D v6 Gold Hotend KIT 24V 1.75mm","public_title":null,"options":["Default Title"],"price":13999,"weight":500,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-e3d-v6-gold-hotend-24v-1-75mm-1_1a6ec823-9bb1-4ac3-abec-13e9ae4e7844.jpeg?v=1594847101","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-e3d-v6-gold-hotend-24v-1-75mm-2_c7c4b85c-ef04-4f53-aa45-c9ca85b9e40a.png?v=1594847101"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-e3d-v6-gold-hotend-24v-1-75mm-1_1a6ec823-9bb1-4ac3-abec-13e9ae4e7844.jpeg?v=1594847101","options":["Title"],"media":[{"alt":"Open Parts - E3D V6 Gold Hotend 24V 1.75mm","id":6832475504758,"position":1,"preview_image":{"aspect_ratio":1.333,"height":699,"width":932,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-e3d-v6-gold-hotend-24v-1-75mm-1_1a6ec823-9bb1-4ac3-abec-13e9ae4e7844.jpeg?v=1594847101"},"aspect_ratio":1.333,"height":699,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-e3d-v6-gold-hotend-24v-1-75mm-1_1a6ec823-9bb1-4ac3-abec-13e9ae4e7844.jpeg?v=1594847101","width":932},{"alt":"Open Parts - E3D V6 Gold Hotend 24V 1.75mm","id":6832475537526,"position":2,"preview_image":{"aspect_ratio":1.333,"height":699,"width":932,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-e3d-v6-gold-hotend-24v-1-75mm-2_c7c4b85c-ef04-4f53-aa45-c9ca85b9e40a.png?v=1594847101"},"aspect_ratio":1.333,"height":699,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-e3d-v6-gold-hotend-24v-1-75mm-2_c7c4b85c-ef04-4f53-aa45-c9ca85b9e40a.png?v=1594847101","width":932}],"content":"\u003cp\u003e\u003cstrong\u003ePlease see the notes below to install this hotend on a Prusa i3 MK3\/S.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe third anniversary edition of the famed E3D v6 Hotend, featuring a gold-anodized heat sink and high-end components.\u003c\/p\u003e\n\u003cp\u003eThis hotend for 1.75mm filament comes AS A KIT (assembled version can be found \u003ca href=\"\/products\/e3d-v6-gold-hotend-24v-1-75mm\" target=\"_blank\" title=\"E3D v6 Gold Hotend assembled\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), with a 0.40mm hardened steel nozzle, high-precision heater cartridge and thermistor.\u003c\/p\u003e\n\u003cp\u003eFeatures :\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGold anodized heat sink\u003c\/li\u003e\n\u003cli\u003eEngraved, plated copper-alloy heater block, increases heat transfer and reduces material adhesion.\u003c\/li\u003e\n\u003cli\u003eHardened steel 0.40mm nozzle, ready for abrasive material printing.\u003c\/li\u003e\n\u003cli\u003eHigh-precision, quick-release heater cartridge (24V 30W 1.25A)\u003c\/li\u003e\n\u003cli\u003eClear fan-duct, to let the gold heat sink show through\u003c\/li\u003e\n\u003cli\u003eHigh Tolerance Capricorn PTFE Tubing, for smooth accurate extrusion.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe box also includes the following :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30mm x 30mm x 10mm 24V clear fan\u003c\/li\u003e\n\u003cli\u003e2 connector cables\u003c\/li\u003e\n\u003cli\u003e1 fibreglass insulated heater connector cable\u003c\/li\u003e\n\u003cli\u003e1 silicone sock\u003c\/li\u003e\n\u003cli\u003e1 thermal compound sachet\u003c\/li\u003e\n\u003cli\u003e1 fixings kit (screws, washers, hex wrench keys)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor installation on a Prusa i3 MK3\/S :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou'll need the \u003ca href=\"\/products\/replacement-prusa-i3-mk3-hotend-heatbreak\" target=\"_blank\" title=\"Prusa i3 MK3\/S heatbreak by E3D\" rel=\"noopener noreferrer\"\u003ePrusa-specific heatbreak\u003c\/a\u003e (especially if you're going to use the MMU2S). \u003cspan\u003eConsider re-using your current Prusa heabreak, or get a new one (available as an accessory).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe included heater cartridge has a lower power and shorter cable length than the \u003ca href=\"\/products\/replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3\" target=\"_blank\" title=\"Prusa i3 MK3\/S heater cartridge 40W 24V by E3D\" rel=\"noopener noreferrer\"\u003estandard Prusa heater cartridge\u003c\/a\u003e (30W vs 40W). Consider re-using your current Prusa heater cartridge, or get a new one (available as an accessory).\u003c\/li\u003e\n\u003cli\u003eThe included thermistor has a shorter cable and different connector than the \u003ca href=\"\/products\/replacement-thermistor-for-prusa-i3-mk2\" target=\"_blank\" title=\"Prusa i3 MK3\/S hotend thermistor by E3D\" rel=\"noopener noreferrer\"\u003estandard Prusa thermistor\u003c\/a\u003e. Consider re-using your current thermistor, or get a new one (available as an accessory).\u003c\/li\u003e\n\u003cli\u003eThe PTFE tube provided by Prusa are \u003ca href=\"https:\/\/manual.prusa3d.com\/Guide\/How+to+trim+PTFE+tube+-+Original+Prusa+i3+printers\/500\" target=\"_blank\" title=\"How to trim PTFE tube guide at prusa3d.com\" rel=\"noopener noreferrer\"\u003ecut, trimmed and chamfered\u003c\/a\u003e to spec for the MK3 or the MK3S. Consider re-using your existing PTFE tube, follow the above guide to cut the Capricorn tube, or get a new one (available as an accessory).\u003c\/li\u003e\n\u003c\/ul\u003e"}

Tête chauffante v6 OR 24V 1.75mm par E3D

Product Description
Sku: E3D-HOT-GLD-KIT-000
Vendor: E3D

Disponible :
Montréal : En calcul...
Vancouver : En calcul...

$139.99
Maximum quantity available reached.

Consultez les notes ci-dessous pour l'installation sur une Prusa i3 MK3/S.

La version troisième anniversaire de la réputée tête chauffante v6 d'E3D. Composantes haut de gamme et radiateur anodisé en or!

Cette tête chauffante pour filament 1.75mm vient entièrement assemblée, avec une buse en acier durci de 0.40mm, une cartouche chauffante haute précision et un thermistor.

Composantes :

  1. Radiateur anodisé en or
  2. Bloc chauffant en alliage de cuivre plaqué, engravé, présentant un excellent transfert de chaleur et une réduction de l'adhésion du matériau d'impression.
  3. Buse en acier durci de 0.40mm, prête à l'utilisation de matériaux abrasifs.
  4. Cartouche chauffante de haute précision à libération rapide.
  5. Conduit de ventilateur transparent, pour laisser paraître l'or du radiateur.
  6. Tube de PTFE Capricorn à haute tolérance, pour une extrusion précise et homogène.

Également inclus dans la boîte :

  • Ventilateur transparent 30mm x 30mm x 10mm 24V
  • 2 câbles
  • 1 câble isolé à la fibre de verre pour la cartouche chauffante
  • 1 protection de silicone
  • 1 sachet de pâte thermique
  • 1 ensemble de fixations (écrous, rondelles, clés hexagonales)

Pour l'installation sur une Prusa i3 MK3/S :

  • Vous aurez besoin du heatbreak spécifique pour la Prusa i3 MK3/S, particulièrement si vous utilisez le MMU2S. Considérez réutiliser le vôtre, ou vous en procurer un nouveau (disponible en accessoire).
  • La cartouche chauffante incluse a un câble plus court et une puissance plus faible que la cartouche chauffante standard de Prusa (30W vs 40W). Considérez réutiliser la vôtre, ou vous en procurer une nouvelle (disponible en accessoire).
  • Le thermistor inclus a un câble plus court et un connecteur différent du thermistor standard Prusa. Considérez réutiliser le vôtre, ou vous en procurer un nouveau (disponible en accessoire).
  • Les tubes de PTFE fournis par Prusa sont coupés, taillés et chanfreinés sur mesure pour la MK3 ou la MK3S. Considérez réutiliser le vôtre, tailler et chanfreiner le tube Capricorn inclus, ou vous en procurer un nouveau (disponible en accessoire).

Related Products