{"id":8616546468076,"title":"UltiMaker Fine Knurl Feeder Left Assembly for S3\/S5\/S7","handle":"ultimaker-fine-knurl-feeder-left-assembly-for-s3-s5-s7","description":"\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThere are two feeder versions for the UltiMaker S series printers. In 2020, UltiMaker introduced the fine knurl feeder. This is an updated version of the S series feeder which features a knurled wheel with a finer pattern. This feeder was implemented to improve the reliability of the UltiMaker S5 Pro Bundle when using PVA.\u003c\/p\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThis feeder became the new default part on the UltiMaker S5, later also for the UltiMaker S3, and has been the standard part for the UltiMaker S7 since this product was launched.\u003c\/p\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eBoth the older and newer feeder versions were set up as service parts. The older feeder types will remain available while supplies last, but no new parts with this knurl pattern will be produced. If these versions are out of stock, they can be replaced by the newer, fine-knurl type. If a feeder needs replacement, it is important to note which type is currently installed on your printer, as both feeders must be the same type.\u003c\/p\u003e\n\u003ch2 data-aura-rendered-by=\"76:311;a\"\u003eWhat are the benefits of the different versions?\u003c\/h2\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThe fine knurl feeders are mainly an improvement on the UltiMaker S5 or S7 Pro Bundle when printing with PVA. The finer pattern is gentler on more brittle materials, reducing the number of breakages, improving uptime, and productivity.\u003c\/p\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThere are no direct benefits, but also no negative effects of the fine knurl feeder on the print quality or reliability of a standalone UltiMaker S5 or the UltiMaker S3. Therefore, this newer version was implemented as the common part on all UltiMaker S series printers.\u003c\/p\u003e\n\u003ch2 data-aura-rendered-by=\"76:311;a\"\u003eWhich feeder do I have?\u003c\/h2\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThe feeder versions look identical from the outside. However, there are several ways to know which feeder type you currently have. Firstly, you can check your serial number.\u003c\/p\u003e\n\u003ctable data-aura-rendered-by=\"76:311;a\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"1\" colspan=\"1\"\u003eUltiMaker S3\u003c\/th\u003e\n\u003ctd rowspan=\"1\" colspan=\"1\"\u003e\n\u003cp\u003eFor UltiMaker S3 printers manufactured in the United States:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBefore\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-036434\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= coarse knurl feeder\u003c\/li\u003e\n\u003cli\u003eStarting with and above\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-036434\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= fine knurl feeder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor UltiMaker S3 printers manufactured in the Netherlands:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBefore\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-038008\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= coarse knurl feeder\u003c\/li\u003e\n\u003cli\u003eStarting with and above\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-038008\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= fine knurl feeder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"1\" colspan=\"1\"\u003eUltiMaker S5\u003c\/th\u003e\n\u003ctd rowspan=\"1\" colspan=\"1\"\u003eFor UltiMaker S5 printers manufactured in either location:\n\u003cul\u003e\n\u003cli\u003eBefore\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-030368\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= coarse knurl feeder\u003c\/li\u003e\n\u003cli\u003eStarting with and above\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-030368\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= fine knurl feeder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"1\" colspan=\"1\"\u003eUltiMaker S7\u003c\/th\u003e\n\u003ctd rowspan=\"1\" colspan=\"1\"\u003eAll UltiMaker S7 printers were manufactured with the fine knurl feeders.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2024-08-06T15:18:19-04:00","created_at":"2024-08-06T15:09:49-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Parts","s3","s5","S7","Ultimaker"],"price":19542,"price_min":19542,"price_max":19542,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45579362730220,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-FAS-FKL-LFT-00S","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"UltiMaker Fine Knurl Feeder Left Assembly for S3\/S5\/S7","public_title":null,"options":["Default Title"],"price":19542,"weight":100,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8719874982726","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/UltiMaker_Fine_Knurl_Feeder_Left_Assembly_for_S3_S5_S7_Product_Drawing.webp?v=1722971779","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_Fine_Knurled_Nut_Product_Picture_d0d46bfc-db30-40c7-96fe-3ad98a457981.webp?v=1722971779"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/UltiMaker_Fine_Knurl_Feeder_Left_Assembly_for_S3_S5_S7_Product_Drawing.webp?v=1722971779","options":["Title"],"media":[{"alt":null,"id":34044467347692,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/UltiMaker_Fine_Knurl_Feeder_Left_Assembly_for_S3_S5_S7_Product_Drawing.webp?v=1722971779"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/UltiMaker_Fine_Knurl_Feeder_Left_Assembly_for_S3_S5_S7_Product_Drawing.webp?v=1722971779","width":1400},{"alt":null,"id":34044467380460,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_Fine_Knurled_Nut_Product_Picture_d0d46bfc-db30-40c7-96fe-3ad98a457981.webp?v=1722971779"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_Fine_Knurled_Nut_Product_Picture_d0d46bfc-db30-40c7-96fe-3ad98a457981.webp?v=1722971779","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThere are two feeder versions for the UltiMaker S series printers. In 2020, UltiMaker introduced the fine knurl feeder. This is an updated version of the S series feeder which features a knurled wheel with a finer pattern. This feeder was implemented to improve the reliability of the UltiMaker S5 Pro Bundle when using PVA.\u003c\/p\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThis feeder became the new default part on the UltiMaker S5, later also for the UltiMaker S3, and has been the standard part for the UltiMaker S7 since this product was launched.\u003c\/p\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eBoth the older and newer feeder versions were set up as service parts. The older feeder types will remain available while supplies last, but no new parts with this knurl pattern will be produced. If these versions are out of stock, they can be replaced by the newer, fine-knurl type. If a feeder needs replacement, it is important to note which type is currently installed on your printer, as both feeders must be the same type.\u003c\/p\u003e\n\u003ch2 data-aura-rendered-by=\"76:311;a\"\u003eWhat are the benefits of the different versions?\u003c\/h2\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThe fine knurl feeders are mainly an improvement on the UltiMaker S5 or S7 Pro Bundle when printing with PVA. The finer pattern is gentler on more brittle materials, reducing the number of breakages, improving uptime, and productivity.\u003c\/p\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThere are no direct benefits, but also no negative effects of the fine knurl feeder on the print quality or reliability of a standalone UltiMaker S5 or the UltiMaker S3. Therefore, this newer version was implemented as the common part on all UltiMaker S series printers.\u003c\/p\u003e\n\u003ch2 data-aura-rendered-by=\"76:311;a\"\u003eWhich feeder do I have?\u003c\/h2\u003e\n\u003cp data-aura-rendered-by=\"76:311;a\"\u003eThe feeder versions look identical from the outside. However, there are several ways to know which feeder type you currently have. Firstly, you can check your serial number.\u003c\/p\u003e\n\u003ctable data-aura-rendered-by=\"76:311;a\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"1\" colspan=\"1\"\u003eUltiMaker S3\u003c\/th\u003e\n\u003ctd rowspan=\"1\" colspan=\"1\"\u003e\n\u003cp\u003eFor UltiMaker S3 printers manufactured in the United States:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBefore\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-036434\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= coarse knurl feeder\u003c\/li\u003e\n\u003cli\u003eStarting with and above\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-036434\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= fine knurl feeder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor UltiMaker S3 printers manufactured in the Netherlands:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBefore\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-038008\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= coarse knurl feeder\u003c\/li\u003e\n\u003cli\u003eStarting with and above\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-038008\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= fine knurl feeder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"1\" colspan=\"1\"\u003eUltiMaker S5\u003c\/th\u003e\n\u003ctd rowspan=\"1\" colspan=\"1\"\u003eFor UltiMaker S5 printers manufactured in either location:\n\u003cul\u003e\n\u003cli\u003eBefore\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-030368\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= coarse knurl feeder\u003c\/li\u003e\n\u003cli\u003eStarting with and above\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBPP-030368\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e= fine knurl feeder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"1\" colspan=\"1\"\u003eUltiMaker S7\u003c\/th\u003e\n\u003ctd rowspan=\"1\" colspan=\"1\"\u003eAll UltiMaker S7 printers were manufactured with the fine knurl feeders.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

UltiMaker Fine Knurl Feeder Left Assembly for S3/S5/S7

Description du produit

Sku: UMK-FAS-FKL-LFT-00S

Vendeur: Ultimaker

$195.42

La quantité maximale disponible est atteinte.

Étiquette : Parts s3 s5 S7 Ultimaker

Description

There are two feeder versions for the UltiMaker S series printers. In 2020, UltiMaker introduced the fine knurl feeder. This is an updated version of the S series feeder which features a knurled wheel with a finer pattern. This feeder was implemented to improve the reliability of the UltiMaker S5 Pro Bundle when using PVA.

This feeder became the new default part on the UltiMaker S5, later also for the UltiMaker S3, and has been the standard part for the UltiMaker S7 since this product was launched.

Both the older and newer feeder versions were set up as service parts. The older feeder types will remain available while supplies last, but no new parts with this knurl pattern will be produced. If these versions are out of stock, they can be replaced by the newer, fine-knurl type. If a feeder needs replacement, it is important to note which type is currently installed on your printer, as both feeders must be the same type.

What are the benefits of the different versions?

The fine knurl feeders are mainly an improvement on the UltiMaker S5 or S7 Pro Bundle when printing with PVA. The finer pattern is gentler on more brittle materials, reducing the number of breakages, improving uptime, and productivity.

There are no direct benefits, but also no negative effects of the fine knurl feeder on the print quality or reliability of a standalone UltiMaker S5 or the UltiMaker S3. Therefore, this newer version was implemented as the common part on all UltiMaker S series printers.

Which feeder do I have?

The feeder versions look identical from the outside. However, there are several ways to know which feeder type you currently have. Firstly, you can check your serial number.

UltiMaker S3	For UltiMaker S3 printers manufactured in the United States: Before BPP-036434 = coarse knurl feeder Starting with and above BPP-036434 = fine knurl feeder For UltiMaker S3 printers manufactured in the Netherlands: Before BPP-038008 = coarse knurl feeder Starting with and above BPP-038008 = fine knurl feeder
UltiMaker S5	For UltiMaker S5 printers manufactured in either location: Before BPP-030368 = coarse knurl feeder Starting with and above BPP-030368 = fine knurl feeder
UltiMaker S7	All UltiMaker S7 printers were manufactured with the fine knurl feeders.

UltiMaker S3

For UltiMaker S3 printers manufactured in the United States:

Before BPP-036434 = coarse knurl feeder
Starting with and above BPP-036434 = fine knurl feeder

For UltiMaker S3 printers manufactured in the Netherlands:

Before BPP-038008 = coarse knurl feeder
Starting with and above BPP-038008 = fine knurl feeder

UltiMaker S5

For UltiMaker S5 printers manufactured in either location:

Before BPP-030368 = coarse knurl feeder
Starting with and above BPP-030368 = fine knurl feeder

UltiMaker S7

All UltiMaker S7 printers were manufactured with the fine knurl feeders.

Produits Connexes

Polymaker Polyterra PLA 1.75mm 1kg

EN STOCK : 473

De $25.99

Polymaker PolyLite PLA 1.75mm 1kg

EN STOCK : 174

$27.99

3DLac pour adhésion au verre d'ABS robuste (et plus)

EN STOCK : 0

$9.99

{"id":355423505,"title":"3DLac pour adhésion au verre d'ABS robuste (et plus)","handle":"3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass","description":"\u003cp\u003eLa solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du\u0026nbsp;\u003ca href=\"\/fr\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eruban bleu\u003c\/a\u003e pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de PLA, d'ABS, de polycarbonate, de PETG, de copolyester, et plus encore!\u003c\/p\u003e\u003cp\u003e\r\n\t\u003cspan style=\"color: #990000;\"\u003e\u003cstrong\u003e*** VEUILLEZ NOTER QUE LE 3DLAC NE PEUT ÊTRE LIVRÉ QU'À L'INTÉRIEUR DU CANADA PAR FEDEX GROUND OU UN DES SERVICES DE POSTE CANADA. Toute commande incluant ce produit par livraison FEDEX EXPRESS\u0026nbsp;ou à l'extérieur du Canada sera annulée. *** \u003c\/strong\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePour une livraison expresse (par avion) choisissez plutôt le\u0026nbsp;\u003ca href=\"\/fr\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, dont le contenu n'est pas sous pression.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNe fonctionne pas pour le nylon, utiliser plutôt la colle de PVA en bâton (Elmer's par exemple).\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tVolume :\u0026nbsp;\u003cstrong\u003e400mL\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContient : Alcool\u0026nbsp;Isopropyl - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcool denat - Parfum (alcoll\u0026nbsp;Benzyl, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal,\u0026nbsp;Amyl cinnamal)\r\n\u003c\/p\u003e","published_at":"2022-04-12T14:53:10-04:00","created_at":"2014-08-11T15:21:35-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","tools"],"price":999,"price_min":999,"price_max":999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203593756790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEO-3DL-AC1-CAN-400","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3DLac pour adhésion au verre d'ABS robuste (et plus)","public_title":null,"options":["Default Title"],"price":999,"weight":500,"compare_at_price":null,"inventory_quantity":-5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322235803","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229","options":["Title"],"media":[{"alt":null,"id":29007220310252,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eLa solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du\u0026nbsp;\u003ca href=\"\/fr\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eruban bleu\u003c\/a\u003e pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de PLA, d'ABS, de polycarbonate, de PETG, de copolyester, et plus encore!\u003c\/p\u003e\u003cp\u003e\r\n\t\u003cspan style=\"color: #990000;\"\u003e\u003cstrong\u003e*** VEUILLEZ NOTER QUE LE 3DLAC NE PEUT ÊTRE LIVRÉ QU'À L'INTÉRIEUR DU CANADA PAR FEDEX GROUND OU UN DES SERVICES DE POSTE CANADA. Toute commande incluant ce produit par livraison FEDEX EXPRESS\u0026nbsp;ou à l'extérieur du Canada sera annulée. *** \u003c\/strong\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePour une livraison expresse (par avion) choisissez plutôt le\u0026nbsp;\u003ca href=\"\/fr\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, dont le contenu n'est pas sous pression.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNe fonctionne pas pour le nylon, utiliser plutôt la colle de PVA en bâton (Elmer's par exemple).\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tVolume :\u0026nbsp;\u003cstrong\u003e400mL\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContient : Alcool\u0026nbsp;Isopropyl - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcool denat - Parfum (alcoll\u0026nbsp;Benzyl, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal,\u0026nbsp;Amyl cinnamal)\r\n\u003c\/p\u003e"}

3DLac pour adhésion au verre d'ABS robuste (et plus)

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$9.99

La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de P...

Kit DIY Prusa i3 MK3S+ Original

EN STOCK : 0

$999.00

{"id":6094472937652,"title":"Kit DIY Prusa i3 MK3S+ Original","handle":"original-prusa-i3-mk3s-plus-diy-kit","description":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eETA St-Hubert : INCONNU -\u0026nbsp;EN RUPTURE DE STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eETA Burnaby : INCONNU - EN RUPTURE DE STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSIGNATURE REQUISE À LA LIVRAISON - VOUS DEVREZ PEUT-ÊTRE ALLER LE CHERCHER À VOTRE BUREAU DE POSTE LOCAL SI VOUS N'ÊTES PAS CHEZ VOUS LE JOUR DE LA LIVRAISON.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePrusa i3 MK3S+ Originale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUne toute nouvelle sonde\u0026nbsp;SuperPINDA ainsi que quelques petits changements. Les axes\u0026nbsp;X et Y ont été légèrement améliorés, les pièces en plastique et les boulons en U ont été remplacés par des clips métalliques qui sont maintenant plus facile à monter. De plus, un certain nombre de modifications mineures ont été apportées aux pièces en plastique de l'extrudeuse afin d'améliorer la fiabilité globale.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eArticle de blog soulignant les nouveaux changements ici\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong style=\"background-color: initial;\"\u003eFilament PLA Prusa\u0026nbsp;Silver inclus !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eKit DIY – Assemblage requis, outils inclus, aucune soudure requise.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTous les kits d'imprimante sont maintenant livrés avec la plaque d'acier recouvert de PEI lisse.\u0026nbsp;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Originale Prusa design i3 MK3S+\u003c\/strong\u003e, par Josef Prusa, le célèbre développeur d'imprimante 3D RepRap de la République Tchèque.\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eCe kit d'imprimante\u0026nbsp;DIY peut utiliser une large gamme de filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFacile à mettre à niveau\u003c\/strong\u003e, c'est l'imprimante parfaite pour les\u0026nbsp;\"Makers\" qui aiment modifier et personnaliser leur propre machine.\u003c\/p\u003e\n\u003cp\u003eToutes les pièces de cette imprimante\u0026nbsp;3D sont\u0026nbsp;Open Source et font partie du projet RepRap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaractéristiques :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCalibrage automatique\u0026nbsp;XYZ\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eNivellement automatique du lit en plusieurs points.\u003c\/li\u003e\n\u003cli\u003eCapteur de filament\u003c\/li\u003e\n\u003cli\u003ePlaque d'impression\u003cstrong\u003e\u0026nbsp;lisse, amovible, à\u0026nbsp;double face\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eLe lit chauffant magnétique MK52 est amovible et les pièces se détachent facilement\u003c\/li\u003e\n\u003cli\u003eSonde PINDA et thermistances de température ambiante pour une plus grande précision\u003c\/li\u003e\n\u003cli\u003eVentilateur de refroidissement Noctua silencieux avec détection du régime pour éviter les erreurs\u003c\/li\u003e\n\u003cli\u003ePrêt pour Octoprint\u003c\/li\u003e\n\u003cli\u003eNouveau pignon d'entraînement Bondtech\u003c\/li\u003e\n\u003cli\u003eLes pilotes Trinamic2130 détectent les pas perdus, pour corriger le décalage des couches\u003c\/li\u003e\n\u003cli\u003eVitesse d'impression jusqu'à 200mm\/s !\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCaractéristiques de la\u0026nbsp;Mk3S+\u0026nbsp;\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNouveau SuperPINDA\u003c\/li\u003e\n\u003cli\u003eNouvelles pièces d'extrudeur imprimées\u003c\/li\u003e\n\u003cli\u003eNouveaux Bearing Clips pour les roulements de l'axe Y\u003c\/li\u003e\n\u003cli\u003eNouveau capteur de filament IR + câble\u003c\/li\u003e\n\u003cli\u003eNouveau tube d'extrudeur en PTFE\u003c\/li\u003e\n\u003cli\u003eCouvercle de ventilateur imprimé en ASA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eListe complète des caractéristiques avec explications ici\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions et poids\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions extérieures\u0026nbsp;: \u0026nbsp;42 x 42 x 39 cm (16.5 x 16.5 x 15.1 pouces)\n\u003c\/li\u003e\n\u003cli\u003ePoids: 11.8 kg (26.3 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImpression\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnologie : Fabrication de filaments fusionnés\u0026nbsp;(FFF)\u003c\/li\u003e\n\u003cli\u003eDimensions de la structure : 250 x 210 x 210 mm (9.8 x 8.3 x 8.3 pouces)\u003c\/li\u003e\n\u003cli\u003eVolume de construction : 11 025 cm3 (675 pouces3)\u003c\/li\u003e\n\u003cli\u003eHauteur des couches : 50-250 microns (0.05-0.25 mm)\u003c\/li\u003e\n\u003cli\u003eDiamètre du filament : 1.75 mm\u003c\/li\u003e\n\u003cli\u003eDiamètre de la buse\u0026nbsp;: 0.4 mm\u003c\/li\u003e\n\u003cli\u003eTempérature maximale de la buse\u0026nbsp;: 300°C\u003c\/li\u003e\n\u003cli\u003eSurface d'impression : \u003cstrong\u003ePEI texturé, lisse ou satin.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\n\u003ch3\u003eTranchage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/slic3r.org\/\" data-mce-style=\"line-height: 1.5;\"\u003eSlic3r\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.simplify3d.com\/\" data-mce-style=\"line-height: 1.5;\"\u003eSimplify3D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\" data-mce-style=\"line-height: 1.5;\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContrôle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.pronterface.com\/\" title=\"Pronterface\" target=\"_blank\"\u003ePronterface\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypes de fichiers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, Gcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Materio3D PLA\" href=\"https:\/\/www.voxelfactory.com\/collections\/pla-1-75mm-filaments\"\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/voxelfactory.com\/collections\/materio3d-pla-1-75mm-filament\" title=\"Materio3D PLA\" target=\"_blank\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/asa-1-75mm-filaments\"\u003e\u003cstrong\u003eASA\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/abs-1-75\"\u003e\u003cstrong\u003eABS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/polycarbonate-1-75mm-filaments\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/petg-1-75mm-filaments\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/flexible-1-75mm-filaments\"\u003e\u003cstrong\u003eMatériaux flexibles\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Nylon\" href=\"https:\/\/www.voxelfactory.com\/collections\/nylon-1-75mm-filaments\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg?_pos=2\u0026_sid=9db733b92\u0026_ss=r\"\u003eFibre de carbone\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg?_pos=1\u0026_sid=7b0a21242\u0026_ss=r\"\u003e\u003cstrong\u003eFibre de verre\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003ePlus d'informations\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Original_Prusa_i3_MK3S_kit_assembly\" title=\"Prusa i3 MK3S assembly manual at prusa3d.com\" target=\"_blank\"\u003eInstructions de montage sur prusa3d.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.prusaprinters.org\/original-prusa-i3-mk3-bloody-smart\/\" title=\"Official announcement by Josef Prusa\"\u003eAnnonce officielle sur prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eAnnonce de la Mk3S+ sur\u0026nbsp;prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-11-26T20:29:13-05:00","created_at":"2020-11-26T12:45:41-05:00","vendor":"Prusa Research","type":"Prusa Research 3D Printers","tags":["3Dprinters","DIY","MK3S+","prusa","RepRap"],"price":99900,"price_min":99900,"price_max":99900,"available":false,"price_varies":false,"compare_at_price":104900,"compare_at_price_min":104900,"compare_at_price_max":104900,"compare_at_price_varies":false,"variants":[{"id":37604402102452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-3DP-I3M-K3S-PLS","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kit DIY Prusa i3 MK3S+ Original","public_title":null,"options":["Default Title"],"price":99900,"weight":11800,"compare_at_price":104900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2_1400x_b18d3256-c0b7-45a9-9c75-c9ed65eb8f0b.jpg?v=1642112388","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4_1400x_94672017-e9df-4b8a-8de5-0e83b2439d36.jpg?v=1642112394"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382","options":["Title"],"media":[{"alt":null,"id":29017280610540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382","width":1400},{"alt":null,"id":29017280970988,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2_1400x_b18d3256-c0b7-45a9-9c75-c9ed65eb8f0b.jpg?v=1642112388"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2_1400x_b18d3256-c0b7-45a9-9c75-c9ed65eb8f0b.jpg?v=1642112388","width":1400},{"alt":null,"id":29017281200364,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4_1400x_94672017-e9df-4b8a-8de5-0e83b2439d36.jpg?v=1642112394"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4_1400x_94672017-e9df-4b8a-8de5-0e83b2439d36.jpg?v=1642112394","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eETA St-Hubert : INCONNU -\u0026nbsp;EN RUPTURE DE STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eETA Burnaby : INCONNU - EN RUPTURE DE STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSIGNATURE REQUISE À LA LIVRAISON - VOUS DEVREZ PEUT-ÊTRE ALLER LE CHERCHER À VOTRE BUREAU DE POSTE LOCAL SI VOUS N'ÊTES PAS CHEZ VOUS LE JOUR DE LA LIVRAISON.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePrusa i3 MK3S+ Originale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUne toute nouvelle sonde\u0026nbsp;SuperPINDA ainsi que quelques petits changements. Les axes\u0026nbsp;X et Y ont été légèrement améliorés, les pièces en plastique et les boulons en U ont été remplacés par des clips métalliques qui sont maintenant plus facile à monter. De plus, un certain nombre de modifications mineures ont été apportées aux pièces en plastique de l'extrudeuse afin d'améliorer la fiabilité globale.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eArticle de blog soulignant les nouveaux changements ici\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong style=\"background-color: initial;\"\u003eFilament PLA Prusa\u0026nbsp;Silver inclus !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eKit DIY – Assemblage requis, outils inclus, aucune soudure requise.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTous les kits d'imprimante sont maintenant livrés avec la plaque d'acier recouvert de PEI lisse.\u0026nbsp;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Originale Prusa design i3 MK3S+\u003c\/strong\u003e, par Josef Prusa, le célèbre développeur d'imprimante 3D RepRap de la République Tchèque.\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eCe kit d'imprimante\u0026nbsp;DIY peut utiliser une large gamme de filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFacile à mettre à niveau\u003c\/strong\u003e, c'est l'imprimante parfaite pour les\u0026nbsp;\"Makers\" qui aiment modifier et personnaliser leur propre machine.\u003c\/p\u003e\n\u003cp\u003eToutes les pièces de cette imprimante\u0026nbsp;3D sont\u0026nbsp;Open Source et font partie du projet RepRap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaractéristiques :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCalibrage automatique\u0026nbsp;XYZ\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eNivellement automatique du lit en plusieurs points.\u003c\/li\u003e\n\u003cli\u003eCapteur de filament\u003c\/li\u003e\n\u003cli\u003ePlaque d'impression\u003cstrong\u003e\u0026nbsp;lisse, amovible, à\u0026nbsp;double face\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eLe lit chauffant magnétique MK52 est amovible et les pièces se détachent facilement\u003c\/li\u003e\n\u003cli\u003eSonde PINDA et thermistances de température ambiante pour une plus grande précision\u003c\/li\u003e\n\u003cli\u003eVentilateur de refroidissement Noctua silencieux avec détection du régime pour éviter les erreurs\u003c\/li\u003e\n\u003cli\u003ePrêt pour Octoprint\u003c\/li\u003e\n\u003cli\u003eNouveau pignon d'entraînement Bondtech\u003c\/li\u003e\n\u003cli\u003eLes pilotes Trinamic2130 détectent les pas perdus, pour corriger le décalage des couches\u003c\/li\u003e\n\u003cli\u003eVitesse d'impression jusqu'à 200mm\/s !\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCaractéristiques de la\u0026nbsp;Mk3S+\u0026nbsp;\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNouveau SuperPINDA\u003c\/li\u003e\n\u003cli\u003eNouvelles pièces d'extrudeur imprimées\u003c\/li\u003e\n\u003cli\u003eNouveaux Bearing Clips pour les roulements de l'axe Y\u003c\/li\u003e\n\u003cli\u003eNouveau capteur de filament IR + câble\u003c\/li\u003e\n\u003cli\u003eNouveau tube d'extrudeur en PTFE\u003c\/li\u003e\n\u003cli\u003eCouvercle de ventilateur imprimé en ASA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eListe complète des caractéristiques avec explications ici\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions et poids\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions extérieures\u0026nbsp;: \u0026nbsp;42 x 42 x 39 cm (16.5 x 16.5 x 15.1 pouces)\n\u003c\/li\u003e\n\u003cli\u003ePoids: 11.8 kg (26.3 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImpression\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnologie : Fabrication de filaments fusionnés\u0026nbsp;(FFF)\u003c\/li\u003e\n\u003cli\u003eDimensions de la structure : 250 x 210 x 210 mm (9.8 x 8.3 x 8.3 pouces)\u003c\/li\u003e\n\u003cli\u003eVolume de construction : 11 025 cm3 (675 pouces3)\u003c\/li\u003e\n\u003cli\u003eHauteur des couches : 50-250 microns (0.05-0.25 mm)\u003c\/li\u003e\n\u003cli\u003eDiamètre du filament : 1.75 mm\u003c\/li\u003e\n\u003cli\u003eDiamètre de la buse\u0026nbsp;: 0.4 mm\u003c\/li\u003e\n\u003cli\u003eTempérature maximale de la buse\u0026nbsp;: 300°C\u003c\/li\u003e\n\u003cli\u003eSurface d'impression : \u003cstrong\u003ePEI texturé, lisse ou satin.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\n\u003ch3\u003eTranchage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/slic3r.org\/\" data-mce-style=\"line-height: 1.5;\"\u003eSlic3r\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.simplify3d.com\/\" data-mce-style=\"line-height: 1.5;\"\u003eSimplify3D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\" data-mce-style=\"line-height: 1.5;\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContrôle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.pronterface.com\/\" title=\"Pronterface\" target=\"_blank\"\u003ePronterface\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypes de fichiers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, Gcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Materio3D PLA\" href=\"https:\/\/www.voxelfactory.com\/collections\/pla-1-75mm-filaments\"\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/voxelfactory.com\/collections\/materio3d-pla-1-75mm-filament\" title=\"Materio3D PLA\" target=\"_blank\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/asa-1-75mm-filaments\"\u003e\u003cstrong\u003eASA\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/abs-1-75\"\u003e\u003cstrong\u003eABS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/polycarbonate-1-75mm-filaments\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/petg-1-75mm-filaments\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/flexible-1-75mm-filaments\"\u003e\u003cstrong\u003eMatériaux flexibles\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Nylon\" href=\"https:\/\/www.voxelfactory.com\/collections\/nylon-1-75mm-filaments\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg?_pos=2\u0026_sid=9db733b92\u0026_ss=r\"\u003eFibre de carbone\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg?_pos=1\u0026_sid=7b0a21242\u0026_ss=r\"\u003e\u003cstrong\u003eFibre de verre\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003ePlus d'informations\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Original_Prusa_i3_MK3S_kit_assembly\" title=\"Prusa i3 MK3S assembly manual at prusa3d.com\" target=\"_blank\"\u003eInstructions de montage sur prusa3d.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.prusaprinters.org\/original-prusa-i3-mk3-bloody-smart\/\" title=\"Official announcement by Josef Prusa\"\u003eAnnonce officielle sur prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eAnnonce de la Mk3S+ sur\u0026nbsp;prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e"}

Kit DIY Prusa i3 MK3S+ Original

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$999.00

ETA St-Hubert : INCONNU - EN RUPTURE DE STOCK ETA Burnaby : INCONNU - EN RUPTURE DE STOCK SIGNATURE REQUISE À LA LIVRAISON - VOUS DEVREZ PEUT-ÊTRE ALLER LE CHERCHER À VOTRE BUREAU DE POSTE LOCAL SI VOUS N'ÊTES PAS CHEZ VOUS LE JOUR DE LA LIVRAISON. Prusa i3 MK3S+ Originale Une toute nouvelle sonde SuperPINDA ainsi que quelques petits c...

Polymaker PolyLite PETG 1.75mm 1kg

EN STOCK : 175

De $27.99

Solution d'adhésion 3DLAC Plus 100mL

EN STOCK : 98

$9.99

{"id":3874371698806,"title":"Solution d'adhésion 3DLAC Plus 100mL","handle":"3dlac-plus-adhesive-solution","description":"\u003cp\u003e\r\n\tLa solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du \r\n\t\u003ca href=\"https:\/\/langify-app.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\"\u003eruban bleu\u003c\/a\u003e pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de PLA, d'ABS, de polycarbonate, de PETG, de copolyester, et plus encore!\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContrairement au\u0026nbsp;\u003ca href=\"\/fr\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" target=\"_blank\"\u003e3DLAC classique\u003c\/a\u003e, le contenu n'est pas sous pression, et donc plus sûr pour le transport, notamment aérien.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eNe fonctionne pas pour le nylon, utiliser plutôt la colle de PVA en bâton (Elmer's par exemple).\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tVolume : \r\n\t\u003cstrong\u003e100mL\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContient : Alcool Isopropyl - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcool denat - Parfum (alcoll Benzyl, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\r\n\u003c\/p\u003e","published_at":"2019-06-20T17:21:40-04:00","created_at":"2019-06-20T13:48:47-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","tools"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203505315958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAB-ADH-3DL-BTL-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solution d'adhésion 3DLAC Plus 100mL","public_title":null,"options":["Default Title"],"price":999,"weight":250,"compare_at_price":null,"inventory_quantity":98,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322240500","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406","options":["Title"],"media":[{"alt":null,"id":29007229059308,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\r\n\tLa solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du \r\n\t\u003ca href=\"https:\/\/langify-app.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\"\u003eruban bleu\u003c\/a\u003e pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de PLA, d'ABS, de polycarbonate, de PETG, de copolyester, et plus encore!\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContrairement au\u0026nbsp;\u003ca href=\"\/fr\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" target=\"_blank\"\u003e3DLAC classique\u003c\/a\u003e, le contenu n'est pas sous pression, et donc plus sûr pour le transport, notamment aérien.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eNe fonctionne pas pour le nylon, utiliser plutôt la colle de PVA en bâton (Elmer's par exemple).\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tVolume : \r\n\t\u003cstrong\u003e100mL\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContient : Alcool Isopropyl - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcool denat - Parfum (alcoll Benzyl, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\r\n\u003c\/p\u003e"}

Solution d'adhésion 3DLAC Plus 100mL

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$9.99

Buse en laiton 0.40mm pour tête chauffante E3D v6

EN STOCK : 44

$9.99

{"id":8859304521,"title":"Buse en laiton 0.40mm pour tête chauffante E3D v6","handle":"brass-nozzle-0-4mm-for-e3d-v6-hot-end","description":"\u003cp\u003eBuse en laiton 0.40mm pour tête chauffante E3D v6.\u003c\/p\u003e\u003ch5\u003eSpecs\u003c\/h5\u003e\u003cp\u003eMatériau : \u003cstrong\u003elaiton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiamètre de l'ouverture : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiamètre du filament : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFiletage : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-02-13T15:00:27-05:00","vendor":"E3D","type":"Open Parts","tags":["0.4mm","e3d","mk2","mk2s","mk3","mk3s","nozzle"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30803869129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOZ-E3D-HOT-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Buse en laiton 0.40mm pour tête chauffante E3D v6","public_title":null,"options":["Default Title"],"price":999,"weight":100,"compare_at_price":null,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341","options":["Title"],"media":[{"alt":null,"id":29057154416876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBuse en laiton 0.40mm pour tête chauffante E3D v6.\u003c\/p\u003e\u003ch5\u003eSpecs\u003c\/h5\u003e\u003cp\u003eMatériau : \u003cstrong\u003elaiton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiamètre de l'ouverture : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiamètre du filament : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFiletage : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e"}

Buse en laiton 0.40mm pour tête chauffante E3D v6

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$9.99

Buse en laiton 0.40mm pour tête chauffante E3D v6.SpecsMatériau : laitonDiamètre de l'ouverture : 0.40mmDiamètre du filament : 1.75mmFiletage : M6

Hotend thermistor for Prusa i3 MK2 and MK3

EN STOCK : 42

$14.99

{"id":10411346953,"title":"Hotend thermistor for Prusa i3 MK2 and MK3","handle":"replacement-thermistor-for-prusa-i3-mk2","description":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-09-11T12:56:47-04:00","vendor":"E3D","type":"Open Parts","tags":["mk2","mk2s","mk3","mk3s","prusa","spare parts","thermistor"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45180568201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-E3D-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hotend thermistor for Prusa i3 MK2 and MK3","public_title":null,"options":["Default Title"],"price":1499,"weight":100,"compare_at_price":null,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859","options":["Title"],"media":[{"alt":null,"id":28990215454956,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e"}

Hotend thermistor for Prusa i3 MK2 and MK3

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$14.99

Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+

Enduit haute performance Smooth-On XTC-3D®

EN STOCK : 18

De $17.00

{"id":397267696,"title":"Enduit haute performance Smooth-On XTC-3D®","handle":"xtc-3d-high-performance-3d-print-coating","description":"\u003cp\u003e\r\n\t\u003cstrong style=\"background-color: initial;\"\u003e* 6.4 oz ou 24 oz\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\t\u003cstrong\u003e** Pour usage industriel seulement\u003c\/strong\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t\u003cstrong\u003e*** impressions\u0026nbsp;SLA\/SLS, impressions\u0026nbsp;FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...)\u003c\/strong\u003e\r\n\u003c\/div\u003e\r\n\u003cbr\u003e\r\n\u003cdiv\u003e\r\n\t\u003cspan\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan\u003e*** -\u0026gt; Hacking t-glase pour un fini semblable au verre! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\r\n\u003c\/div\u003e\r\n\u003cbr\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e\u0026nbsp;est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux liquides sont mélangés et peints sur toute impression 3D. L'enduit s'auto nivelle et mouille la surface uniformément sans laisser de trace de\u0026nbsp;pinceaux. Il prend 10 minutes à fonctionner et 4 heures à durcir (dépendamment de la masse et la température).\u0026nbsp;XTC-3D® \u0026nbsp;durcit en un revêtement dur et\u0026nbsp;résistant aux impacts, qui peut être sablé, apprêté et peint. Ajouter des couleurs et des effets métalliques devient très facile.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003ePeu coûteux à utiliser:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz couvre 100+ pouces carrés.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003e90% en temps et travail épargné:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® rempli les stries de l'impression 3D et créé un fini lisse et lustré. Les besoins en post-finition sont presque éliminés.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003eEnduisez n'importe quelle surface imprimée en 3D:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® peut être appliqué autant sur les impressions SLA que SLS.\u0026nbsp;Il fonctionne avec le\u0026nbsp;PLA, ABS, Laywoo, pièces \"Powder Printed\" et autres médiums rigides. Il peut aussi être utilisé pour enduire de l'EPS, du\u0026nbsp;EPDM et de la mousse d'uréthane, en plus du bois, du\u0026nbsp;plâtre, du\u0026nbsp;tissu, du\u0026nbsp;carton et du\u0026nbsp;papier.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cspan\u003eXTC-3D® ne contient aucun\u0026nbsp;VOC, phthalates ou phosphates.\u003c\/span\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\r\n\u003c\/p\u003e","published_at":"2014-12-23T10:02:00-05:00","created_at":"2014-12-23T10:11:58-05:00","vendor":"Smooth-On","type":"Tools","tags":["tools"],"price":1700,"price_min":1700,"price_max":4800,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1072896796,"title":"6.4 Oz","option1":"6.4 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-064-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Enduit haute performance Smooth-On XTC-3D® - 6.4 Oz","public_title":"6.4 Oz","options":["6.4 Oz"],"price":1700,"weight":500,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696211","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":3620344261,"title":"24 Oz","option1":"24 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-240-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Enduit haute performance Smooth-On XTC-3D® - 24 Oz","public_title":"24 Oz","options":["24 Oz"],"price":4800,"weight":1000,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696419","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","options":["Size"],"media":[{"alt":null,"id":29008343531756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","width":1400},{"alt":null,"id":29008343892204,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485","width":1400},{"alt":null,"id":29008344613100,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\r\n\t\u003cstrong style=\"background-color: initial;\"\u003e* 6.4 oz ou 24 oz\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\t\u003cstrong\u003e** Pour usage industriel seulement\u003c\/strong\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t\u003cstrong\u003e*** impressions\u0026nbsp;SLA\/SLS, impressions\u0026nbsp;FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...)\u003c\/strong\u003e\r\n\u003c\/div\u003e\r\n\u003cbr\u003e\r\n\u003cdiv\u003e\r\n\t\u003cspan\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan\u003e*** -\u0026gt; Hacking t-glase pour un fini semblable au verre! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\r\n\u003c\/div\u003e\r\n\u003cbr\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e\u0026nbsp;est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux liquides sont mélangés et peints sur toute impression 3D. L'enduit s'auto nivelle et mouille la surface uniformément sans laisser de trace de\u0026nbsp;pinceaux. Il prend 10 minutes à fonctionner et 4 heures à durcir (dépendamment de la masse et la température).\u0026nbsp;XTC-3D® \u0026nbsp;durcit en un revêtement dur et\u0026nbsp;résistant aux impacts, qui peut être sablé, apprêté et peint. Ajouter des couleurs et des effets métalliques devient très facile.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003ePeu coûteux à utiliser:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz couvre 100+ pouces carrés.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003e90% en temps et travail épargné:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® rempli les stries de l'impression 3D et créé un fini lisse et lustré. Les besoins en post-finition sont presque éliminés.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003eEnduisez n'importe quelle surface imprimée en 3D:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® peut être appliqué autant sur les impressions SLA que SLS.\u0026nbsp;Il fonctionne avec le\u0026nbsp;PLA, ABS, Laywoo, pièces \"Powder Printed\" et autres médiums rigides. Il peut aussi être utilisé pour enduire de l'EPS, du\u0026nbsp;EPDM et de la mousse d'uréthane, en plus du bois, du\u0026nbsp;plâtre, du\u0026nbsp;tissu, du\u0026nbsp;carton et du\u0026nbsp;papier.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cspan\u003eXTC-3D® ne contient aucun\u0026nbsp;VOC, phthalates ou phosphates.\u003c\/span\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\r\n\u003c\/p\u003e"}

Enduit haute performance Smooth-On XTC-3D®

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$17.00

* 6.4 oz ou 24 oz ** Pour usage industriel seulement *** impressions SLA/SLS, impressions FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...) *** -> Hacking t-glase pour un fini semblable au verre! <- *** XTC-3D® est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux ...

Size

6.4 Oz

24 Oz

Polymaker PolyLite Silk PLA 1.75mm 1kg

EN STOCK : 90

$31.99

{"id":7446331621612,"title":"Polymaker PolyLite Silk PLA 1.75mm 1kg","handle":"polymaker-polylite-silk-pla-1-75mm-1kg","description":"\u003cp data-mce-fragment=\"1\"\u003ePolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament diameter :\u003cstrong data-mce-fragment=\"1\"\u003e 1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight : \u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eColor : \u003cstrong data-mce-fragment=\"1\"\u003ebronze, silver, gold, lime, blue and magenta\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTechnical Data Sheet\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003eClick \u003ca href=\"https:\/\/www.poly-maker.jp\/download\/TDS\/Polylite_PLA_Silk_EN_V5.1.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e to download the Technical Data Sheet for the PolyLite Silk PLA filament.\u003c\/p\u003e","published_at":"2021-11-13T19:16:19-05:00","created_at":"2021-11-13T19:16:19-05:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","pla","polymaker"],"price":3199,"price_min":3199,"price_max":3199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42051661660396,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"PMK-SLK-BLU-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405056748,"product_id":7446331621612,"position":2,"created_at":"2021-11-13T19:19:33-05:00","updated_at":"2021-11-13T19:19:33-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173","variant_ids":[42051661660396]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Blue","public_title":"Blue","options":["Blue"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675094764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051662414060,"title":"Bronze","option1":"Bronze","option2":null,"option3":null,"sku":"PMK-SLK-BNZ-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405548268,"product_id":7446331621612,"position":3,"created_at":"2021-11-13T19:20:19-05:00","updated_at":"2021-11-13T19:20:19-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219","variant_ids":[42051662414060]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Bronze","public_title":"Bronze","options":["Bronze"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936708766","featured_media":{"alt":null,"id":26928675619052,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051662872812,"title":"Gold","option1":"Gold","option2":null,"option3":null,"sku":"PMK-SLK-GLD-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405417196,"product_id":7446331621612,"position":4,"created_at":"2021-11-13T19:20:14-05:00","updated_at":"2021-11-13T19:20:14-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214","variant_ids":[42051662872812]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Gold","public_title":"Gold","options":["Gold"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675520748,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051663102188,"title":"Lime","option1":"Lime","option2":null,"option3":null,"sku":"PMK-SLK-LIM-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405515500,"product_id":7446331621612,"position":5,"created_at":"2021-11-13T19:20:18-05:00","updated_at":"2021-11-13T19:20:18-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218","variant_ids":[42051663102188]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Lime","public_title":"Lime","options":["Lime"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675586284,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051663593708,"title":"Magenta","option1":"Magenta","option2":null,"option3":null,"sku":"PMK-SLK-MAG-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405482732,"product_id":7446331621612,"position":6,"created_at":"2021-11-13T19:20:16-05:00","updated_at":"2021-11-13T19:20:16-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216","variant_ids":[42051663593708]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Magenta","public_title":"Magenta","options":["Magenta"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675553516,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051664773356,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"PMK-SLK-SLV-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405613804,"product_id":7446331621612,"position":7,"created_at":"2021-11-13T19:20:21-05:00","updated_at":"2021-11-13T19:20:21-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221","variant_ids":[42051664773356]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Silver","public_title":"Silver","options":["Silver"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675684588,"position":7,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149","options":["Color"],"media":[{"alt":null,"id":26928673784044,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149","width":1400},{"alt":null,"id":26928675094764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173","width":1400},{"alt":null,"id":26928675619052,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219","width":1400},{"alt":null,"id":26928675520748,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214","width":1400},{"alt":null,"id":26928675586284,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218","width":1400},{"alt":null,"id":26928675553516,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216","width":1400},{"alt":null,"id":26928675684588,"position":7,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003ePolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament diameter :\u003cstrong data-mce-fragment=\"1\"\u003e 1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight : \u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eColor : \u003cstrong data-mce-fragment=\"1\"\u003ebronze, silver, gold, lime, blue and magenta\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTechnical Data Sheet\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003eClick \u003ca href=\"https:\/\/www.poly-maker.jp\/download\/TDS\/Polylite_PLA_Silk_EN_V5.1.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e to download the Technical Data Sheet for the PolyLite Silk PLA filament.\u003c\/p\u003e"}

Polymaker PolyLite Silk PLA 1.75mm 1kg

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$31.99

PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : bronze, silver, gold, lime, blue and magenta Technical Data Sheet Click here to download the Technical Data Sheet for the PolyLite Silk PLA filament.

Color

E3D Heater Cartridge 24V for Prusa i3 MK3/S

EN STOCK : 52

$11.99

{"id":1632151240822,"title":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S","handle":"replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3","description":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+ \/ MINI\u003c\/p\u003e","published_at":"2017-12-13T14:22:45-05:00","created_at":"2018-06-26T15:13:03-04:00","vendor":"Voxel Factory","type":"Open Parts","tags":[],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14699569348726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-HTC-E3D-040-24V","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S","public_title":null,"options":["Default Title"],"price":1199,"weight":100,"compare_at_price":null,"inventory_quantity":52,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051","options":["Title"],"media":[{"alt":null,"id":28990234001644,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+ \/ MINI\u003c\/p\u003e"}

E3D Heater Cartridge 24V for Prusa i3 MK3/S

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$11.99

Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+ / MINI

Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3

EN STOCK : 2

$69.99

{"id":3931939766390,"title":"Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3","handle":"textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3","description":"\u003cp\u003eOriginal spring steel sheet, double-sided with textured, powder-coated PEI surface. \u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e","published_at":"2019-09-09T11:54:14-04:00","created_at":"2019-07-18T17:34:42-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["mk3","MK3S","prusa","spare parts"],"price":6999,"price_min":6999,"price_max":6999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29406152556662,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SSS-TXT-PEI-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3","public_title":null,"options":["Default Title"],"price":6999,"weight":500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207","options":["Title"],"media":[{"alt":null,"id":29021440999660,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eOriginal spring steel sheet, double-sided with textured, powder-coated PEI surface. \u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e"}

Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$69.99

Original spring steel sheet, double-sided with textured, powder-coated PEI surface. It is ONLY compatible with Prusa i3 MK2.5 / MK2.5S / MK3 / MK3S / MK3S+