Free shipping for online orders over $200 / Livraison gratuite pour les commandes en ligne de $200 et+
{"id":8665218220268,"title":"Fuse Blast Polishing System","handle":"fuse-blast-polishing-system","description":"\u003cp\u003eThe Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts.\u003c\/p\u003e\n\u003cp\u003eThis single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast. The Polishing System is compatible with any Fuse Blast and includes:\u003c\/p\u003e\n\u003cp\u003e1 - Fuse Blast Polishing Module\u003cbr\u003e2 - Fuse Blast Polishing Media Jugs\u003cbr\u003e1 - Fuse Blast Polishing Agent Bottle\u003c\/p\u003e\n\u003ch4\u003eHow It Works\u003c\/h4\u003e\n\u003cp\u003eWhile standard glass-blasting leaves a rough, matte surface, the Polishing System cleans and smooths parts in one step through impact polishing. The Polishing Module doses and aerosolizes a small amount of Polishing Agent solution in the blast stream to condition the Polishing Media. This media compacts the part surface, achieving a smooth, semi-gloss finish without removing material, similar to shot peening.\u003c\/p\u003e\n\u003cp\u003eA minimum blasting pressure of 60 PSI is recommended for best results. Fuse Blast’s Adaptive Airflow feature enables lower-capacity compressors to handle this increased airflow requirement by pausing the cycle while the compressor recharges. This delivers an uninterrupted, hands-off experience for cleaning and polishing your consumer-ready, SLS parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlast Polishing Time:\u003c\/strong\u003e 20-60 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishing Media Lifetime:\u003c\/strong\u003e \u0026gt; 100 blasting cycles (no breakdown observed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlasting Pressure:\u003c\/strong\u003e 60 PSI minimum recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishing Agent Lifetime:\u003c\/strong\u003e 7 mL of Polishing Agent is diluted in 750 mL of water. One 120 mL bottle lasts ~130 cycles @ 45 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Flowrate:\u003c\/strong\u003e 2 mL \/ minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Tank Volume:\u003c\/strong\u003e 750 mL\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-09-16T15:34:11-04:00","created_at":"2024-09-16T15:34:11-04:00","vendor":"Formlabs","type":"Formlabs SLS parts","tags":["formlabs","Parts","SLS"],"price":369763,"price_min":369763,"price_max":369763,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45737803022572,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-SLS-PLS-STM-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fuse Blast Polishing System","public_title":null,"options":["Default Title"],"price":369763,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Polishing_System_Add_On_Picture.webp?v=1726514868"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Polishing_System_Add_On_Picture.webp?v=1726514868","options":["Title"],"media":[{"alt":null,"id":34242082570476,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Polishing_System_Add_On_Picture.webp?v=1726514868"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Polishing_System_Add_On_Picture.webp?v=1726514868","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts.\u003c\/p\u003e\n\u003cp\u003eThis single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast. The Polishing System is compatible with any Fuse Blast and includes:\u003c\/p\u003e\n\u003cp\u003e1 - Fuse Blast Polishing Module\u003cbr\u003e2 - Fuse Blast Polishing Media Jugs\u003cbr\u003e1 - Fuse Blast Polishing Agent Bottle\u003c\/p\u003e\n\u003ch4\u003eHow It Works\u003c\/h4\u003e\n\u003cp\u003eWhile standard glass-blasting leaves a rough, matte surface, the Polishing System cleans and smooths parts in one step through impact polishing. The Polishing Module doses and aerosolizes a small amount of Polishing Agent solution in the blast stream to condition the Polishing Media. This media compacts the part surface, achieving a smooth, semi-gloss finish without removing material, similar to shot peening.\u003c\/p\u003e\n\u003cp\u003eA minimum blasting pressure of 60 PSI is recommended for best results. Fuse Blast’s Adaptive Airflow feature enables lower-capacity compressors to handle this increased airflow requirement by pausing the cycle while the compressor recharges. This delivers an uninterrupted, hands-off experience for cleaning and polishing your consumer-ready, SLS parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlast Polishing Time:\u003c\/strong\u003e 20-60 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishing Media Lifetime:\u003c\/strong\u003e \u0026gt; 100 blasting cycles (no breakdown observed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlasting Pressure:\u003c\/strong\u003e 60 PSI minimum recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishing Agent Lifetime:\u003c\/strong\u003e 7 mL of Polishing Agent is diluted in 750 mL of water. One 120 mL bottle lasts ~130 cycles @ 45 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Flowrate:\u003c\/strong\u003e 2 mL \/ minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Tank Volume:\u003c\/strong\u003e 750 mL\u003c\/li\u003e\n\u003c\/ul\u003e"}

Fuse Blast Polishing System

Description du produit
Sku: FLB-SLS-PLS-STM-000
Vendeur: Formlabs

EN STOCK : 0

$3,697.63
La quantité maximale disponible est atteinte.

The Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts.

This single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast. The Polishing System is compatible with any Fuse Blast and includes:

1 - Fuse Blast Polishing Module
2 - Fuse Blast Polishing Media Jugs
1 - Fuse Blast Polishing Agent Bottle

How It Works

While standard glass-blasting leaves a rough, matte surface, the Polishing System cleans and smooths parts in one step through impact polishing. The Polishing Module doses and aerosolizes a small amount of Polishing Agent solution in the blast stream to condition the Polishing Media. This media compacts the part surface, achieving a smooth, semi-gloss finish without removing material, similar to shot peening.

A minimum blasting pressure of 60 PSI is recommended for best results. Fuse Blast’s Adaptive Airflow feature enables lower-capacity compressors to handle this increased airflow requirement by pausing the cycle while the compressor recharges. This delivers an uninterrupted, hands-off experience for cleaning and polishing your consumer-ready, SLS parts.

  • Blast Polishing Time: 20-60 minutes
  • Polishing Media Lifetime: > 100 blasting cycles (no breakdown observed)
  • Blasting Pressure: 60 PSI minimum recommended
  • Polishing Agent Lifetime: 7 mL of Polishing Agent is diluted in 750 mL of water. One 120 mL bottle lasts ~130 cycles @ 45 minutes
  • Recommended Flowrate: 2 mL / minute
  • Water Tank Volume: 750 mL

Produits Connexes