{"id":8211549257964,"title":"Formlabs Fuse Blast","handle":"formlabs-fuse-blast","description":"\u003cp\u003eAchieve professional, consistent parts that are clean to the touch faster and easier than ever before with Fuse Blast, an easy-to-use, fully automated cleaning and polishing solution for post-processing SLS 3D printed parts.\u003c\/p\u003e\n\u003cp\u003eFuse Blast seamlessly integrates into the Fuse Series ecosystem and streamlines your post-processing workflow, empowering you to fully clean a whole build chamber of printed parts in as little as 15 minutes and drastically reducing labor time and cost. With the optional Polishing System, Fuse Blast takes your parts to another level by polishing them to a smooth, semi-gloss, and dye-ready surface finish, to deliver consistent, professional-grade results every time.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ctable class=\"Table_data-table__4Q7PA\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum Dimensions for Convenient Access (W × D × H)\u003c\/th\u003e\n\u003ctd\u003e145 × 150 × 210 cm\u003cbr\u003e57.4 × 59.6 × 82.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e100 × 75 × 175 cm\u003cbr\u003e39 × 29.6 × 68.7 in\u003cbr\u003eHeight when open: 195cm (76.8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e164 kg (without blasting media)\u003cbr\u003e360 lb (without blasting media)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMedia Hopper Capacity\u003c\/th\u003e\n\u003ctd\u003eMedia hopper capacity 8.3 L, equivalent to 13 kg of 200-300 µm glass media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste Hopper Capacity\u003c\/th\u003e\n\u003ctd\u003e10.6 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating Environment\u003c\/th\u003e\n\u003ctd\u003e10–36 ºC\u003cbr\u003e50–96.8 ºF\u003cbr\u003eElevation up to 7500 ft \/ 2286 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir Handling\u003c\/th\u003e\n\u003ctd\u003eNegatively pressurized hood with replaceable HEPA filter\u003cbr\u003eIndependent venting system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e\u003cb\u003ePower Requirements\u003cbr\u003e(with a vacuum that draws less than 6 A (230 VAC) \/ 12 A (120 VAC))\u003c\/b\u003e\u003c\/th\u003e\n\u003ctd\u003e\n\u003cb\u003eEU:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e230 VAC, 3 A (no dedicated circuit or vacuum required)\u003cbr\u003e\u003cb\u003eUS:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e120 VAC, 6 A (no dedicated circuit or vacuum required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompressed Air Requirements\u003c\/th\u003e\n\u003ctd\u003eSupply at least 10 SCFM at 90 PSI \/ 285 SLPM at 6 bar.\u003cbr\u003eRegulate pressure input between 90-120 PSI \/ 6-8 bar.\u003cbr\u003eTypically achieved by a single 4 HP compressor.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003e\n\u003cb\u003eWi-Fi\u003c\/b\u003e: 2.4 GHz\u003cbr\u003e\u003cb\u003eEthernet:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e1000 Mbit\u003cbr\u003e\u003cb\u003eUSB:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWi-Fi Connectivity\u003c\/th\u003e\n\u003ctd\u003e\n\u003cb\u003eProtocol:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eIEEE 802.11 b\/g\/n\u003cbr\u003e\u003cb\u003eFrequency:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e2.4 \/ 5.0 GHz\u003cbr\u003e\u003cb\u003eSupported security:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWPA\/WPA2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEthernet Connectivity\u003c\/th\u003e\n\u003ctd\u003eRJ-45 Ethernet (10BASE-T\/100BASE-TX\/1000BASE-T) LAN port\u003cbr\u003eConnect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUSB Connectivity\u003c\/th\u003e\n\u003ctd\u003eUSB (rev 2.0) C port with a USB A-C or C-C cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSound Emission\u003c\/th\u003e\n\u003ctd\u003eDoes not exceed 75 dB(A).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Control\u003c\/th\u003e\n\u003ctd\u003eInteractive touchscreen, foot pedals for manual control.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded Accessories\u003c\/th\u003e\n\u003ctd\u003eTransfer container\u003cbr\u003eControl pedals\u003cbr\u003eESD wrist strap\u003cbr\u003e7mm socket wrench\u003cbr\u003eBlast orifice (3mm)\u003cbr\u003eBlast orifice (4mm)\u003cbr\u003eT-20 driver\u003cbr\u003eFloor mat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTumbling Basket\u003c\/th\u003e\n\u003ctd\u003e450mm internal diameter\u003cbr\u003e(Fits a full Fuse build volume)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInternal work area (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e71 x 55 x 67 cm\u003cbr\u003e27.9 x 21.6 x 26.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAccessible work area (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e57 x 50 x 67 cm\u003cbr\u003e22.4 x 19.6 x 26.4 in\u003cbr\u003e(basket removed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003ePrinter compatibility: Fuse 1, Fuse 1+ 30W\u003c\/p\u003e\n\u003cp\u003e* While the Fuse Blast was developed by Formlabs for the Fuse 1+ solution, it should work for any SLS 3D printed parts.\u003c\/p\u003e\n\u003cp\u003eMaterial compatibility: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A\u003c\/p\u003e","published_at":"2024-02-27T13:30:03-05:00","created_at":"2024-02-27T13:00:52-05:00","vendor":"Formlabs","type":"Formlabs 3D Printers","tags":["3Dprinters","formlabs","SLS"],"price":1506900,"price_min":1506900,"price_max":1506900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44486696042732,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-3DP-SLS-BST-120","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Fuse Blast","public_title":null,"options":["Default Title"],"price":1506900,"weight":200000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Open_Product_Picture.webp?v=1709061313","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Closed_Product_Picture.webp?v=1709061313","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Automated_Blasting_In_Tumbler.webp?v=1709061313","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_3DPrinted_Parts_Different_Finition.webp?v=1709061313"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Open_Product_Picture.webp?v=1709061313","options":["Title"],"media":[{"alt":null,"id":32651106353388,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Open_Product_Picture.webp?v=1709061313"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Open_Product_Picture.webp?v=1709061313","width":1400},{"alt":null,"id":32651106320620,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Closed_Product_Picture.webp?v=1709061313"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Closed_Product_Picture.webp?v=1709061313","width":1400},{"alt":null,"id":32651106255084,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Automated_Blasting_In_Tumbler.webp?v=1709061313"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Automated_Blasting_In_Tumbler.webp?v=1709061313","width":1400},{"alt":null,"id":32651106287852,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_3DPrinted_Parts_Different_Finition.webp?v=1709061313"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_3DPrinted_Parts_Different_Finition.webp?v=1709061313","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAchieve professional, consistent parts that are clean to the touch faster and easier than ever before with Fuse Blast, an easy-to-use, fully automated cleaning and polishing solution for post-processing SLS 3D printed parts.\u003c\/p\u003e\n\u003cp\u003eFuse Blast seamlessly integrates into the Fuse Series ecosystem and streamlines your post-processing workflow, empowering you to fully clean a whole build chamber of printed parts in as little as 15 minutes and drastically reducing labor time and cost. With the optional Polishing System, Fuse Blast takes your parts to another level by polishing them to a smooth, semi-gloss, and dye-ready surface finish, to deliver consistent, professional-grade results every time.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ctable class=\"Table_data-table__4Q7PA\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum Dimensions for Convenient Access (W × D × H)\u003c\/th\u003e\n\u003ctd\u003e145 × 150 × 210 cm\u003cbr\u003e57.4 × 59.6 × 82.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e100 × 75 × 175 cm\u003cbr\u003e39 × 29.6 × 68.7 in\u003cbr\u003eHeight when open: 195cm (76.8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e164 kg (without blasting media)\u003cbr\u003e360 lb (without blasting media)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMedia Hopper Capacity\u003c\/th\u003e\n\u003ctd\u003eMedia hopper capacity 8.3 L, equivalent to 13 kg of 200-300 µm glass media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste Hopper Capacity\u003c\/th\u003e\n\u003ctd\u003e10.6 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating Environment\u003c\/th\u003e\n\u003ctd\u003e10–36 ºC\u003cbr\u003e50–96.8 ºF\u003cbr\u003eElevation up to 7500 ft \/ 2286 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir Handling\u003c\/th\u003e\n\u003ctd\u003eNegatively pressurized hood with replaceable HEPA filter\u003cbr\u003eIndependent venting system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e\u003cb\u003ePower Requirements\u003cbr\u003e(with a vacuum that draws less than 6 A (230 VAC) \/ 12 A (120 VAC))\u003c\/b\u003e\u003c\/th\u003e\n\u003ctd\u003e\n\u003cb\u003eEU:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e230 VAC, 3 A (no dedicated circuit or vacuum required)\u003cbr\u003e\u003cb\u003eUS:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e120 VAC, 6 A (no dedicated circuit or vacuum required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompressed Air Requirements\u003c\/th\u003e\n\u003ctd\u003eSupply at least 10 SCFM at 90 PSI \/ 285 SLPM at 6 bar.\u003cbr\u003eRegulate pressure input between 90-120 PSI \/ 6-8 bar.\u003cbr\u003eTypically achieved by a single 4 HP compressor.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003e\n\u003cb\u003eWi-Fi\u003c\/b\u003e: 2.4 GHz\u003cbr\u003e\u003cb\u003eEthernet:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e1000 Mbit\u003cbr\u003e\u003cb\u003eUSB:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWi-Fi Connectivity\u003c\/th\u003e\n\u003ctd\u003e\n\u003cb\u003eProtocol:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eIEEE 802.11 b\/g\/n\u003cbr\u003e\u003cb\u003eFrequency:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e2.4 \/ 5.0 GHz\u003cbr\u003e\u003cb\u003eSupported security:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWPA\/WPA2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEthernet Connectivity\u003c\/th\u003e\n\u003ctd\u003eRJ-45 Ethernet (10BASE-T\/100BASE-TX\/1000BASE-T) LAN port\u003cbr\u003eConnect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUSB Connectivity\u003c\/th\u003e\n\u003ctd\u003eUSB (rev 2.0) C port with a USB A-C or C-C cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSound Emission\u003c\/th\u003e\n\u003ctd\u003eDoes not exceed 75 dB(A).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Control\u003c\/th\u003e\n\u003ctd\u003eInteractive touchscreen, foot pedals for manual control.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded Accessories\u003c\/th\u003e\n\u003ctd\u003eTransfer container\u003cbr\u003eControl pedals\u003cbr\u003eESD wrist strap\u003cbr\u003e7mm socket wrench\u003cbr\u003eBlast orifice (3mm)\u003cbr\u003eBlast orifice (4mm)\u003cbr\u003eT-20 driver\u003cbr\u003eFloor mat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTumbling Basket\u003c\/th\u003e\n\u003ctd\u003e450mm internal diameter\u003cbr\u003e(Fits a full Fuse build volume)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInternal work area (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e71 x 55 x 67 cm\u003cbr\u003e27.9 x 21.6 x 26.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAccessible work area (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e57 x 50 x 67 cm\u003cbr\u003e22.4 x 19.6 x 26.4 in\u003cbr\u003e(basket removed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003ePrinter compatibility: Fuse 1, Fuse 1+ 30W\u003c\/p\u003e\n\u003cp\u003e* While the Fuse Blast was developed by Formlabs for the Fuse 1+ solution, it should work for any SLS 3D printed parts.\u003c\/p\u003e\n\u003cp\u003eMaterial compatibility: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A\u003c\/p\u003e"}
Formlabs Fuse Blast
Produits Connexes
{"id":7837948215532,"title":"Fuse 1+ 30W SLS 3D Printer 110V with Build Chamber","handle":"fuse-1-30w-3d-printer-120v-with-build-chamber","description":"\u003cp data-mce-fragment=\"1\"\u003eDesigned for maximum output and minimum waste, Fuse 1+ 30W is our compact SLS 3D printer that packs an industrial punch. Unlock unprecedented print speeds and a full range of materials to deliver truly rapid prototyping and production in-house.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBuilding on effective powder containment and an easy setup, Fuse 1+ 30W is equipped with a powerful, 30W laser enabling same-day delivery of prototypes and end-use parts. Active powder handling unlocks the use of exclusive, new materials such as carbon-fiber-reinforced nylon, and a nitrogen purge print option allows for unprecedented performance and consistency across all SLS parts.\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eWhat's included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFuse 1+ 120V\u003c\/li\u003e\n\u003cli\u003eFuse Series Build Chamber 120V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e* Please note that the Fuse 1+ alone without the other equipment like the sift, the vacuum and such is not optimal. Select the products you need in the accessories list or email us to know more about why a complete system is really needed if you don't already own a Formlabs SLS 3D printer system.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology :\u003cstrong\u003e\u003cspan\u003e Selective Laser Sintering (SLS)\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume :\u003cspan\u003e\u003cstrong\u003e 16.5 × 16.5 × 30 cm\u003c\/strong\u003e (6.5 × 6.5 × 11.8 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLayer height :\u003cspan\u003e \u003cstrong\u003e110\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e microns\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLaser type :\u003cstrong\u003e\u003cspan\u003e \u003cspan data-mce-fragment=\"1\"\u003eYtterbium Fiber 30W\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLaser power :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e250mW\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnectivity :\u003cspan\u003e \u003cstrong\u003eWi-Fi (2.4GHz + 5GHz), Ethernet (1000 Mbit), USB 2.0\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Requirements :\u003cstrong\u003e 120 VAC, 15 A (dedicated circuit)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2023-06-15T15:48:34-04:00","created_at":"2022-12-01T14:14:04-05:00","vendor":"formlabs","type":"Formlabs 3D Printers","tags":["3Dprinters","formlabs","SLS"],"price":3971500,"price_min":3971500,"price_max":3971500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43536371843308,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-3DP-SLS-F1P-30W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fuse 1+ 30W SLS 3D Printer 110V with Build Chamber","public_title":null,"options":["Default Title"],"price":3971500,"weight":118000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"811294032581","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse1__SLS_3D_Printer_With_Included_Build_Chamber_Picture.webp?v=1686858257","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse1__SLS_3D_Printer_Front_View.webp?v=1686858499"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse1__SLS_3D_Printer_With_Included_Build_Chamber_Picture.webp?v=1686858257","options":["Title"],"media":[{"alt":null,"id":31717926633708,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse1__SLS_3D_Printer_With_Included_Build_Chamber_Picture.webp?v=1686858257"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse1__SLS_3D_Printer_With_Included_Build_Chamber_Picture.webp?v=1686858257","width":1400},{"alt":null,"id":31717942100204,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse1__SLS_3D_Printer_Front_View.webp?v=1686858499"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse1__SLS_3D_Printer_Front_View.webp?v=1686858499","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eDesigned for maximum output and minimum waste, Fuse 1+ 30W is our compact SLS 3D printer that packs an industrial punch. Unlock unprecedented print speeds and a full range of materials to deliver truly rapid prototyping and production in-house.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBuilding on effective powder containment and an easy setup, Fuse 1+ 30W is equipped with a powerful, 30W laser enabling same-day delivery of prototypes and end-use parts. Active powder handling unlocks the use of exclusive, new materials such as carbon-fiber-reinforced nylon, and a nitrogen purge print option allows for unprecedented performance and consistency across all SLS parts.\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eWhat's included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFuse 1+ 120V\u003c\/li\u003e\n\u003cli\u003eFuse Series Build Chamber 120V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e* Please note that the Fuse 1+ alone without the other equipment like the sift, the vacuum and such is not optimal. Select the products you need in the accessories list or email us to know more about why a complete system is really needed if you don't already own a Formlabs SLS 3D printer system.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology :\u003cstrong\u003e\u003cspan\u003e Selective Laser Sintering (SLS)\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume :\u003cspan\u003e\u003cstrong\u003e 16.5 × 16.5 × 30 cm\u003c\/strong\u003e (6.5 × 6.5 × 11.8 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLayer height :\u003cspan\u003e \u003cstrong\u003e110\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e microns\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLaser type :\u003cstrong\u003e\u003cspan\u003e \u003cspan data-mce-fragment=\"1\"\u003eYtterbium Fiber 30W\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLaser power :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e250mW\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnectivity :\u003cspan\u003e \u003cstrong\u003eWi-Fi (2.4GHz + 5GHz), Ethernet (1000 Mbit), USB 2.0\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Requirements :\u003cstrong\u003e 120 VAC, 15 A (dedicated circuit)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}
Fuse 1+ 30W SLS 3D Printer 110V with Build Chamber
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$39,715.00
Designed for maximum output and minimum waste, Fuse 1+ 30W is our compact SLS 3D printer that packs an industrial punch. Unlock unprecedented print speeds and a full range of materials to deliver truly rapid prototyping and production in-house. Building on effective powder containment and an easy setup, Fuse 1+ 30W is equipped with a powerful, 3...
{"id":7837953818860,"title":"Formlabs Fuse Sift 120v","handle":"formlabs-fuse-sift-120v","description":"\u003cp\u003eThe Fuse Sift is a safe, efficient powder recovery system for the Fuse 1 generation printers. This easy-to-use, all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device, for the most functionality in a single device available on the SLS market.\u003c\/p\u003e\n\u003cp\u003eCompact, enclosed system: A negative air pressure system keeps powder inside while enabling open access and easy cleanup.\u003c\/p\u003e\n\u003cp\u003eLow waste: A 30% material refresh rate means you can print with up to 70% recycled powder, indefinitely. Fuse Sift’s sieve filters out particles to be remixed with new powder and reused in future prints.\u003c\/p\u003e\n\u003cp\u003eAutomatic powder mixing: Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.\u003cbr\u003eNonstop printing: Reduce downtime by transferring modular build chambers and powder cartridges between the Formlabs SLS 3D printer and Fuse Sift for a nonstop, cyclical workflow.\u003c\/p\u003e\n\u003cp\u003eA complete toolkit: The Fuse Sift includes a set of finishing tools to help you clean excess powder from parts with ease.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e* Vacuum on picture 2 is an accessories sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003ePrinter compatibility: Fuse 1, Fuse 1+ 30W\u003cbr\u003eMaterial compatibility: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A\u003c\/p\u003e","published_at":"2024-02-27T13:15:33-05:00","created_at":"2022-12-01T14:21:46-05:00","vendor":"Formlabs","type":"Formlabs 3D Printers","tags":["3Dprinters","formlabs","SLS"],"price":1369900,"price_min":1369900,"price_max":1369900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43536387211500,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-3DP-SLS-SFT-120","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Fuse Sift 120v","public_title":null,"options":["Default Title"],"price":1369900,"weight":138000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"811294031280","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Product_Image_Front_View.webp?v=1686849435","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Image_With_Sold_Separatly_Vacuum.webp?v=1686849435"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Product_Image_Front_View.webp?v=1686849435","options":["Title"],"media":[{"alt":null,"id":31717439275244,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Product_Image_Front_View.webp?v=1686849435"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Product_Image_Front_View.webp?v=1686849435","width":1400},{"alt":null,"id":31717439242476,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Image_With_Sold_Separatly_Vacuum.webp?v=1686849435"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Image_With_Sold_Separatly_Vacuum.webp?v=1686849435","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Fuse Sift is a safe, efficient powder recovery system for the Fuse 1 generation printers. This easy-to-use, all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device, for the most functionality in a single device available on the SLS market.\u003c\/p\u003e\n\u003cp\u003eCompact, enclosed system: A negative air pressure system keeps powder inside while enabling open access and easy cleanup.\u003c\/p\u003e\n\u003cp\u003eLow waste: A 30% material refresh rate means you can print with up to 70% recycled powder, indefinitely. Fuse Sift’s sieve filters out particles to be remixed with new powder and reused in future prints.\u003c\/p\u003e\n\u003cp\u003eAutomatic powder mixing: Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.\u003cbr\u003eNonstop printing: Reduce downtime by transferring modular build chambers and powder cartridges between the Formlabs SLS 3D printer and Fuse Sift for a nonstop, cyclical workflow.\u003c\/p\u003e\n\u003cp\u003eA complete toolkit: The Fuse Sift includes a set of finishing tools to help you clean excess powder from parts with ease.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e* Vacuum on picture 2 is an accessories sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003ePrinter compatibility: Fuse 1, Fuse 1+ 30W\u003cbr\u003eMaterial compatibility: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A\u003c\/p\u003e"}
Formlabs Fuse Sift 120v
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$13,699.00
The Fuse Sift is a safe, efficient powder recovery system for the Fuse 1 generation printers. This easy-to-use, all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device, for the most functionality in a single device available on the SLS market. Compact, enclosed system: A negative air pre...
{"id":8665240305900,"title":"Formlabs Powder-Safe Vacuum 120V (by Festool)","handle":"formlabs-powder-safe-vacuum-120v-by-festool","description":"\u003cp\u003eThe portable SLS Vacuum is NFPA-652 compliant and safe for use with all Formlabs SLS powders. It can be connected directly to the Fuse Sift integrated hose for clearing powder from a build chamber, removing debris, and cleaning your SLS workstation. Unlike the Industrial Vacuum, the Powder-safe SLS Vacuum cannot be controlled or automatically triggered from the Fuse Sift interface.\u003c\/p\u003e","published_at":"2024-09-16T16:15:00-04:00","created_at":"2024-09-16T16:15:00-04:00","vendor":"Formlabs","type":"Formlabs Parts","tags":["formlabs","Parts","SLS"],"price":164263,"price_min":164263,"price_max":164263,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45737863545068,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-SLS-VCM-FST-120","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Powder-Safe Vacuum 120V (by Festool)","public_title":null,"options":["Default Title"],"price":164263,"weight":15000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Powder-Safe_Vacuum_120V_By_Festool.webp?v=1726517560"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Powder-Safe_Vacuum_120V_By_Festool.webp?v=1726517560","options":["Title"],"media":[{"alt":null,"id":34242160132332,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Powder-Safe_Vacuum_120V_By_Festool.webp?v=1726517560"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Powder-Safe_Vacuum_120V_By_Festool.webp?v=1726517560","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe portable SLS Vacuum is NFPA-652 compliant and safe for use with all Formlabs SLS powders. It can be connected directly to the Fuse Sift integrated hose for clearing powder from a build chamber, removing debris, and cleaning your SLS workstation. Unlike the Industrial Vacuum, the Powder-safe SLS Vacuum cannot be controlled or automatically triggered from the Fuse Sift interface.\u003c\/p\u003e"}
Formlabs Powder-Safe Vacuum 120V (by Festool)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$1,642.63
The portable SLS Vacuum is NFPA-652 compliant and safe for use with all Formlabs SLS powders. It can be connected directly to the Fuse Sift integrated hose for clearing powder from a build chamber, removing debris, and cleaning your SLS workstation. Unlike the Industrial Vacuum, the Powder-safe SLS Vacuum cannot be controlled or automatically tr...
{"id":8665218220268,"title":"Fuse Blast Polishing System","handle":"fuse-blast-polishing-system","description":"\u003cp\u003eThe Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts.\u003c\/p\u003e\n\u003cp\u003eThis single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast. The Polishing System is compatible with any Fuse Blast and includes:\u003c\/p\u003e\n\u003cp\u003e1 - Fuse Blast Polishing Module\u003cbr\u003e2 - Fuse Blast Polishing Media Jugs\u003cbr\u003e1 - Fuse Blast Polishing Agent Bottle\u003c\/p\u003e\n\u003ch4\u003eHow It Works\u003c\/h4\u003e\n\u003cp\u003eWhile standard glass-blasting leaves a rough, matte surface, the Polishing System cleans and smooths parts in one step through impact polishing. The Polishing Module doses and aerosolizes a small amount of Polishing Agent solution in the blast stream to condition the Polishing Media. This media compacts the part surface, achieving a smooth, semi-gloss finish without removing material, similar to shot peening.\u003c\/p\u003e\n\u003cp\u003eA minimum blasting pressure of 60 PSI is recommended for best results. Fuse Blast’s Adaptive Airflow feature enables lower-capacity compressors to handle this increased airflow requirement by pausing the cycle while the compressor recharges. This delivers an uninterrupted, hands-off experience for cleaning and polishing your consumer-ready, SLS parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlast Polishing Time:\u003c\/strong\u003e 20-60 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishing Media Lifetime:\u003c\/strong\u003e \u0026gt; 100 blasting cycles (no breakdown observed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlasting Pressure:\u003c\/strong\u003e 60 PSI minimum recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishing Agent Lifetime:\u003c\/strong\u003e 7 mL of Polishing Agent is diluted in 750 mL of water. One 120 mL bottle lasts ~130 cycles @ 45 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Flowrate:\u003c\/strong\u003e 2 mL \/ minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Tank Volume:\u003c\/strong\u003e 750 mL\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-09-16T15:34:11-04:00","created_at":"2024-09-16T15:34:11-04:00","vendor":"Formlabs","type":"Formlabs SLS parts","tags":["formlabs","Parts","SLS"],"price":369763,"price_min":369763,"price_max":369763,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45737803022572,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-SLS-PLS-STM-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fuse Blast Polishing System","public_title":null,"options":["Default Title"],"price":369763,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Polishing_System_Add_On_Picture.webp?v=1726514868"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Polishing_System_Add_On_Picture.webp?v=1726514868","options":["Title"],"media":[{"alt":null,"id":34242082570476,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Polishing_System_Add_On_Picture.webp?v=1726514868"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Blast_Polishing_System_Add_On_Picture.webp?v=1726514868","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts.\u003c\/p\u003e\n\u003cp\u003eThis single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast. The Polishing System is compatible with any Fuse Blast and includes:\u003c\/p\u003e\n\u003cp\u003e1 - Fuse Blast Polishing Module\u003cbr\u003e2 - Fuse Blast Polishing Media Jugs\u003cbr\u003e1 - Fuse Blast Polishing Agent Bottle\u003c\/p\u003e\n\u003ch4\u003eHow It Works\u003c\/h4\u003e\n\u003cp\u003eWhile standard glass-blasting leaves a rough, matte surface, the Polishing System cleans and smooths parts in one step through impact polishing. The Polishing Module doses and aerosolizes a small amount of Polishing Agent solution in the blast stream to condition the Polishing Media. This media compacts the part surface, achieving a smooth, semi-gloss finish without removing material, similar to shot peening.\u003c\/p\u003e\n\u003cp\u003eA minimum blasting pressure of 60 PSI is recommended for best results. Fuse Blast’s Adaptive Airflow feature enables lower-capacity compressors to handle this increased airflow requirement by pausing the cycle while the compressor recharges. This delivers an uninterrupted, hands-off experience for cleaning and polishing your consumer-ready, SLS parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlast Polishing Time:\u003c\/strong\u003e 20-60 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishing Media Lifetime:\u003c\/strong\u003e \u0026gt; 100 blasting cycles (no breakdown observed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlasting Pressure:\u003c\/strong\u003e 60 PSI minimum recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishing Agent Lifetime:\u003c\/strong\u003e 7 mL of Polishing Agent is diluted in 750 mL of water. One 120 mL bottle lasts ~130 cycles @ 45 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Flowrate:\u003c\/strong\u003e 2 mL \/ minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Tank Volume:\u003c\/strong\u003e 750 mL\u003c\/li\u003e\n\u003c\/ul\u003e"}
Fuse Blast Polishing System
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$3,697.63
The Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts. This single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast. The Polishing...
{"id":8665177915628,"title":"Fuse Sift Glovebox Panel","handle":"fuse-sift-glovebox-panel","description":"\u003cp\u003eEnhance your part extraction process with the Fuse Sift Glovebox Panel, an accessory designed to enable an enclosed workspace for the Fuse Series ecosystem. It easily installs onto the Fuse Sift, creating a contained environment that eliminates dust exposure and ensures an ergonomic workflow. This innovative design protects the operator and the surrounding workspace from unwanted powder dispersion.\u003c\/p\u003e","published_at":"2024-09-16T14:32:28-04:00","created_at":"2024-09-16T14:32:28-04:00","vendor":"Formlabs","type":"Formlabs Parts","tags":["formlabs","Parts","SLS"],"price":41100,"price_min":41100,"price_max":41100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45737715532012,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-SLS-SFT-GVB-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fuse Sift Glovebox Panel","public_title":null,"options":["Default Title"],"price":41100,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Glovebox_Panel_Product_Picture.webp?v=1726511480","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Glovebox_Panel_Installed_Product_Picture.webp?v=1726511757"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Glovebox_Panel_Product_Picture.webp?v=1726511480","options":["Title"],"media":[{"alt":null,"id":34241967816940,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Glovebox_Panel_Product_Picture.webp?v=1726511480"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Glovebox_Panel_Product_Picture.webp?v=1726511480","width":1400},{"alt":null,"id":34241989640428,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Glovebox_Panel_Installed_Product_Picture.webp?v=1726511757"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_Sift_Glovebox_Panel_Installed_Product_Picture.webp?v=1726511757","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eEnhance your part extraction process with the Fuse Sift Glovebox Panel, an accessory designed to enable an enclosed workspace for the Fuse Series ecosystem. It easily installs onto the Fuse Sift, creating a contained environment that eliminates dust exposure and ensures an ergonomic workflow. This innovative design protects the operator and the surrounding workspace from unwanted powder dispersion.\u003c\/p\u003e"}
Fuse Sift Glovebox Panel
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$411.00
Enhance your part extraction process with the Fuse Sift Glovebox Panel, an accessory designed to enable an enclosed workspace for the Fuse Series ecosystem. It easily installs onto the Fuse Sift, creating a contained environment that eliminates dust exposure and ensures an ergonomic workflow. This innovative design protects the operator and the ...
{"id":7837976723692,"title":"Fuse Series 3D Printers Stand","handle":"fuse-series-3d-printers-stand","description":"\u003cp\u003e\u003cspan\u003eThis steel stand raises the Fuse 1 to an ergonomic height, keeping the printer stable and level while enabling easy access to the print chamber and touchscreen display. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003ePrinter compatibility: Fuse 1, Fuse 1+ 30W\u003c\/p\u003e","published_at":"2023-06-15T11:43:28-04:00","created_at":"2022-12-01T14:52:50-05:00","vendor":"formlabs","type":"3D Printer Add-on","tags":["add-on","formlabs","SLS"],"price":41000,"price_min":41000,"price_max":41000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43536450126060,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-SLS-PRT-STN-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Fuse Series 3D Printers Stand","public_title":null,"options":["Default Title"],"price":41000,"weight":24000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294031607","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Fuse_Series_3D_Printers_Stand.webp?v=1686843993"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Fuse_Series_3D_Printers_Stand.webp?v=1686843993","options":["Title"],"media":[{"alt":null,"id":31717070340332,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Fuse_Series_3D_Printers_Stand.webp?v=1686843993"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Fuse_Series_3D_Printers_Stand.webp?v=1686843993","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThis steel stand raises the Fuse 1 to an ergonomic height, keeping the printer stable and level while enabling easy access to the print chamber and touchscreen display. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003ePrinter compatibility: Fuse 1, Fuse 1+ 30W\u003c\/p\u003e"}
Fuse Series 3D Printers Stand
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$410.00
This steel stand raises the Fuse 1 to an ergonomic height, keeping the printer stable and level while enabling easy access to the print chamber and touchscreen display. Compatibility Printer compatibility: Fuse 1, Fuse 1+ 30W
{"id":8680595161324,"title":"Formlabs Fuse 1+, Sift \u0026 Blast Complete Service","handle":"formlabs-fuse-1-sift-blast-complete-service","description":"\u003ch4 class=\"Header_headerText__erapV Header_as-h5__AoVAf Header_weight-700__NTHpg Header_theme__gG0vm\"\u003eMaximum peace of mind\u003c\/h4\u003e\n\u003cp\u003eThe Fuse Series Complete Service Plan is designed for maximum peace of mind with private remote training to get you started, direct phone and email support, as well as preventative check ups to keep you printing, and rapid repairs by Certified SLS Experts in case to resolve any major issues. Each plan includes support for one Fuse Series printer, a Fuse Sift, and a Fuse Blast.\u003c\/p\u003e\n\u003cdiv class=\"CheckmarkList_list-container__YgcKN\"\u003e\n\u003cul\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eRemote training\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eDirect phone and email support\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003ePrivate remote training\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eAnnual preventative checkups\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eWorry-free warranty\u003c\/span\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2024-10-03T14:11:15-04:00","created_at":"2024-10-03T14:11:15-04:00","vendor":"Formlabs","type":"Formlabs Services","tags":["formlabs","Services"],"price":616500,"price_min":616500,"price_max":2698900,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45792263569644,"title":"1 Year","option1":"1 Year","option2":null,"option3":null,"sku":"FLB-SRV-FSB-CSV-012","requires_shipping":true,"taxable":true,"featured_image":{"id":41752232362220,"product_id":8680595161324,"position":1,"created_at":"2024-10-03T14:04:17-04:00","updated_at":"2024-10-03T14:04:18-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658","variant_ids":[45792263569644,45792263602412,45792263635180,45792263667948]},"available":true,"name":"Formlabs Fuse 1+, Sift \u0026 Blast Complete Service - 1 Year","public_title":"1 Year","options":["1 Year"],"price":616500,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","featured_media":{"alt":null,"id":34323349995756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":45792263602412,"title":"2 Years","option1":"2 Years","option2":null,"option3":null,"sku":"FLB-SRV-FSB-CSV-024","requires_shipping":true,"taxable":true,"featured_image":{"id":41752232362220,"product_id":8680595161324,"position":1,"created_at":"2024-10-03T14:04:17-04:00","updated_at":"2024-10-03T14:04:18-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658","variant_ids":[45792263569644,45792263602412,45792263635180,45792263667948]},"available":true,"name":"Formlabs Fuse 1+, Sift \u0026 Blast Complete Service - 2 Years","public_title":"2 Years","options":["2 Years"],"price":1198750,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","featured_media":{"alt":null,"id":34323349995756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":45792263635180,"title":"3 Years","option1":"3 Years","option2":null,"option3":null,"sku":"FLB-SRV-FSB-CSV-036","requires_shipping":true,"taxable":true,"featured_image":{"id":41752232362220,"product_id":8680595161324,"position":1,"created_at":"2024-10-03T14:04:17-04:00","updated_at":"2024-10-03T14:04:18-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658","variant_ids":[45792263569644,45792263602412,45792263635180,45792263667948]},"available":true,"name":"Formlabs Fuse 1+, Sift \u0026 Blast Complete Service - 3 Years","public_title":"3 Years","options":["3 Years"],"price":1739900,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","featured_media":{"alt":null,"id":34323349995756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":45792263667948,"title":"5 Years","option1":"5 Years","option2":null,"option3":null,"sku":"FLB-SRV-FSB-CSV-060","requires_shipping":true,"taxable":true,"featured_image":{"id":41752232362220,"product_id":8680595161324,"position":1,"created_at":"2024-10-03T14:04:17-04:00","updated_at":"2024-10-03T14:04:18-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658","variant_ids":[45792263569644,45792263602412,45792263635180,45792263667948]},"available":true,"name":"Formlabs Fuse 1+, Sift \u0026 Blast Complete Service - 5 Years","public_title":"5 Years","options":["5 Years"],"price":2698900,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","featured_media":{"alt":null,"id":34323349995756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658","options":["Duration"],"media":[{"alt":null,"id":34323349995756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Fuse_1__Sift___Blast_Complete_Service.webp?v=1727978658","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4 class=\"Header_headerText__erapV Header_as-h5__AoVAf Header_weight-700__NTHpg Header_theme__gG0vm\"\u003eMaximum peace of mind\u003c\/h4\u003e\n\u003cp\u003eThe Fuse Series Complete Service Plan is designed for maximum peace of mind with private remote training to get you started, direct phone and email support, as well as preventative check ups to keep you printing, and rapid repairs by Certified SLS Experts in case to resolve any major issues. Each plan includes support for one Fuse Series printer, a Fuse Sift, and a Fuse Blast.\u003c\/p\u003e\n\u003cdiv class=\"CheckmarkList_list-container__YgcKN\"\u003e\n\u003cul\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eRemote training\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eDirect phone and email support\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003ePrivate remote training\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eAnnual preventative checkups\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-1__BVl6a CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT noCircle\"\u003e\n\u003ci class=\"fl-v2 fl-v2-fl-check Icon_blue__NrUnM Icon_icon___a8Fw\" aria-hidden=\"true\" role=\"presentation\"\u003e\u003c\/i\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003eWorry-free warranty\u003c\/span\u003e\u003cspan class=\"CheckmarkList_single-line__oAEjo\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}
Formlabs Fuse 1+, Sift & Blast Complete Service
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$6,165.00
Maximum peace of mind The Fuse Series Complete Service Plan is designed for maximum peace of mind with private remote training to get you started, direct phone and email support, as well as preventative check ups to keep you printing, and rapid repairs by Certified SLS Experts in case to resolve any major issues. Each plan includes support for o...
