{"id":6705431969972,"title":"Caverna PP Filament 1.75mm 0.5kg","handle":"caverna-pp-filament-1-75mm-0-5kg","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"s1\"\u003eA polypropylene build material with a co-continuous, microporous morphology.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"s1\"\u003eThe first in the line of unique Caverna build materials from Infinite™, Caverna PP (a polypropylene filament) has a water-soluble phase that dissolves to create a co-continuous, microporous morphology. After dissolution, the resulting material is soft and porous, and provides incredible moisture vapor transmission.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT - These filaments are extremely sensitive to moisture. If the filament is exposed to air for a long period of time during printing, there is a very high risk of decreasing the quality of the filament. It is therefore necessary to keep the filament in a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003edry storage box\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eat all times, even during printing. This box helps to preserve the integrity of the filament and protect it so that it retains its unique properties. Since this product can degrade easily, it is essential to obtain a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003efilament dehydrator\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eand use it to dry the filament before using it.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor the dry storage box, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePolymaker PolyBox Edition II\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor a Filament dehydrator, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePrintDry Filament Dryer Pro\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--camp_tab panel entry-content wc-tab\" id=\"tab-camp_tab\" role=\"tabpanel\" aria-labelledby=\"tab-title-camp_tab\" style=\"display: block;\"\u003e\n\u003cdiv class=\"wrapper-compatibility\"\u003e\n\u003ch2\u003ePrinter Compatibility.\u003c\/h2\u003e\n\u003cp\u003eCaverna PP is available in 1.75mm and 2.85mm filament to meet the needs of most professional, industrial, and prosumer 3D printers. It’s been tested specifically on AON3D and Ultimaker S5 printers.\u003c\/p\u003e\n\u003ch2\u003eMaterial compatibility.\u003c\/h2\u003e\n\u003cp\u003eCaverna PP is compatible with standard, non-porous polypropylene, so users can create prints with selectively soft and rigid areas. And it pairs perfectly with AquaSys 120, enabling design freedom and easy support removal.\u003c\/p\u003e\n\u003cp\u003eFilament diameter :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWeight : \u003cstrong\u003e500g\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003ePrinting Parameters\u003c\/h5\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eCaverna PP filament is designed for use in fused filament fabrication (FFF) printers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e 190-240°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild Plate Temperature:\u003c\/strong\u003e 95-125°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChamber Temperature:\u003c\/strong\u003e 20-50°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint Geometry:\u003c\/strong\u003e Gyroid for best dissolution\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdhesives: \u003c\/strong\u003ePrint with a brim and glue on glass build plates. We recommend Dimafix glue.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003ePore size: 1–4µ\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/infinitematerialsolutions.com\/wp-content\/uploads\/2021\/05\/64360-IMS-Caverna-PP-TDS-0421.pdf\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/infinitematerialsolutions.com\/wp-content\/uploads\/2021\/05\/64366-IMS-Caverna-PP-SDS-0421.pdf\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-27T15:10:46-04:00","created_at":"2021-06-15T15:11:16-04:00","vendor":"Infinite Materials Solutions","type":"Open 1.75 Filaments","tags":["1.75mm","Polypropelene","PP"],"price":13800,"price_min":13800,"price_max":13800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39987103760564,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AQS-CAV-PPP-175-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Caverna PP Filament 1.75mm 0.5kg","public_title":null,"options":["Default Title"],"price":13800,"weight":700,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850014147082","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Caverna-PP-Angle-Logo-4x3.jpg?v=1627413037","\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Caverna-PP-Flat-Logo-4x3.jpg?v=1627413038"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Caverna-PP-Angle-Logo-4x3.jpg?v=1627413037","options":["Title"],"media":[{"alt":null,"id":22218741252276,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Caverna-PP-Angle-Logo-4x3.jpg?v=1627413037"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Caverna-PP-Angle-Logo-4x3.jpg?v=1627413037","width":1400},{"alt":null,"id":22218741285044,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Caverna-PP-Flat-Logo-4x3.jpg?v=1627413038"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Caverna-PP-Flat-Logo-4x3.jpg?v=1627413038","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"s1\"\u003eA polypropylene build material with a co-continuous, microporous morphology.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"s1\"\u003eThe first in the line of unique Caverna build materials from Infinite™, Caverna PP (a polypropylene filament) has a water-soluble phase that dissolves to create a co-continuous, microporous morphology. After dissolution, the resulting material is soft and porous, and provides incredible moisture vapor transmission.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT - These filaments are extremely sensitive to moisture. If the filament is exposed to air for a long period of time during printing, there is a very high risk of decreasing the quality of the filament. It is therefore necessary to keep the filament in a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003edry storage box\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eat all times, even during printing. This box helps to preserve the integrity of the filament and protect it so that it retains its unique properties. Since this product can degrade easily, it is essential to obtain a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003efilament dehydrator\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eand use it to dry the filament before using it.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor the dry storage box, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePolymaker PolyBox Edition II\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor a Filament dehydrator, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePrintDry Filament Dryer Pro\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--camp_tab panel entry-content wc-tab\" id=\"tab-camp_tab\" role=\"tabpanel\" aria-labelledby=\"tab-title-camp_tab\" style=\"display: block;\"\u003e\n\u003cdiv class=\"wrapper-compatibility\"\u003e\n\u003ch2\u003ePrinter Compatibility.\u003c\/h2\u003e\n\u003cp\u003eCaverna PP is available in 1.75mm and 2.85mm filament to meet the needs of most professional, industrial, and prosumer 3D printers. It’s been tested specifically on AON3D and Ultimaker S5 printers.\u003c\/p\u003e\n\u003ch2\u003eMaterial compatibility.\u003c\/h2\u003e\n\u003cp\u003eCaverna PP is compatible with standard, non-porous polypropylene, so users can create prints with selectively soft and rigid areas. And it pairs perfectly with AquaSys 120, enabling design freedom and easy support removal.\u003c\/p\u003e\n\u003cp\u003eFilament diameter :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWeight : \u003cstrong\u003e500g\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003ePrinting Parameters\u003c\/h5\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eCaverna PP filament is designed for use in fused filament fabrication (FFF) printers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e 190-240°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild Plate Temperature:\u003c\/strong\u003e 95-125°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChamber Temperature:\u003c\/strong\u003e 20-50°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint Geometry:\u003c\/strong\u003e Gyroid for best dissolution\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdhesives: \u003c\/strong\u003ePrint with a brim and glue on glass build plates. We recommend Dimafix glue.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003ePore size: 1–4µ\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/infinitematerialsolutions.com\/wp-content\/uploads\/2021\/05\/64360-IMS-Caverna-PP-TDS-0421.pdf\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/infinitematerialsolutions.com\/wp-content\/uploads\/2021\/05\/64366-IMS-Caverna-PP-SDS-0421.pdf\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Caverna PP Filament 1.75mm 0.5kg
Produits Connexes
{"id":4521866395766,"title":"AquaSys 120 Filament 1.75mm 0.5kg","handle":"aquasys-120-filament-1-75mm-0-5kg","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eAquaSys 120 is a 3D printing support filament designed for engineering grade building materials. Compatible with ABS, PC, Nylon, TPU, and many more materials, it allows the printing of complex 3D shapes while retaining a good surface finish on supported parts.\u003c\/p\u003e\n\u003cp\u003eThe Aquasys 120 support filament is completely water-soluble, leaving no residue. It dissolves quickly in warm tap water.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT - These filaments are extremely sensitive to moisture. If the filament is exposed to air for a long period of time during printing, there is a very high risk of decreasing the quality of the filament. It is therefore necessary to keep the filament in a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003edry storage box\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eat all times, even during printing. This box helps to preserve the integrity of the filament and protect it so that it retains its unique properties. Since this product can degrade easily, it is essential to obtain a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003efilament dehydrator\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eand use it to dry the filament before using it.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor the dry storage box, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePolymaker PolyBox Edition II\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor a Filament dehydrator, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePrintDry Filament Dryer Pro\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMaterial compatibility :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polylite-black-abs-1-75mm-1kg\" title=\"Polymaker PolyLite Black ABS filament\" target=\"_blank\"\u003eABS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003ePC\/ABS\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polymide-black-copa-1-75mm-0-75kg\" title=\"Polymaker PolyMide Black Nylon filament\" target=\"_blank\"\u003eNylon\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polyflex-black-tpu95-1-75mm-0-75kg\" title=\"Polymaker PolyFlex Black TPU95 filament\" target=\"_blank\"\u003eTPU\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCPE\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polymax-black-pc-1-75mm-0-75kg\" title=\"Polymaker PolyMax Black PC\" target=\"_blank\"\u003ePC\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003ePP\u003c\/li\u003e\n\u003cli\u003ePVDF\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polymax-black-petg-1-75mm-0-75kg\" title=\"Polymaker PolyMax Black PETG filament\" target=\"_blank\"\u003ePETG\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003ePET\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg\" title=\"Polymaker PolyMide PA6-CF carbon fiber filled filament\" target=\"_blank\"\u003eCarbon fiber\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg\" title=\"Polymaker PolyMide PA6-GF glass fiber filled filament\" target=\"_blank\"\u003eglass fiber\u003c\/a\u003e filled materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWeight : \u003cstrong\u003e500g\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/AquaSys120-TDS_190918.pdf?v=1592511205\" title=\"AquaSys 120 Technical datasheet (TDS)\" target=\"_blank\"\u003eTechnical datasheet\u003c\/a\u003e (.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/AquaSys120-SDS_190918.pdf?v=1592511102\" title=\"Aquasys 120 Safety Datasheet (SDS)\" target=\"_blank\"\u003eSafety datasheet\u003c\/a\u003e (.pdf)\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-07-16T11:44:06-04:00","created_at":"2020-06-05T17:27:53-04:00","vendor":"Infinite Materials Solutions","type":"Open 1.75 Filaments","tags":["soluble","support"],"price":14000,"price_min":14000,"price_max":14000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31830989176950,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AQS-FIL-120-175-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AquaSys 120 Filament 1.75mm 0.5kg","public_title":null,"options":["Default Title"],"price":14000,"weight":1000,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850014147013","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/open-1-75-filaments-aquasys-120-filament-1-75mm-0-5kg-1_1400x_bbd46f89-5539-4cc7-a80a-8d334386f0c1.jpg?v=1643060577"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/open-1-75-filaments-aquasys-120-filament-1-75mm-0-5kg-1_1400x_bbd46f89-5539-4cc7-a80a-8d334386f0c1.jpg?v=1643060577","options":["Title"],"media":[{"alt":null,"id":29080282792172,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/open-1-75-filaments-aquasys-120-filament-1-75mm-0-5kg-1_1400x_bbd46f89-5539-4cc7-a80a-8d334386f0c1.jpg?v=1643060577"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/open-1-75-filaments-aquasys-120-filament-1-75mm-0-5kg-1_1400x_bbd46f89-5539-4cc7-a80a-8d334386f0c1.jpg?v=1643060577","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eAquaSys 120 is a 3D printing support filament designed for engineering grade building materials. Compatible with ABS, PC, Nylon, TPU, and many more materials, it allows the printing of complex 3D shapes while retaining a good surface finish on supported parts.\u003c\/p\u003e\n\u003cp\u003eThe Aquasys 120 support filament is completely water-soluble, leaving no residue. It dissolves quickly in warm tap water.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT - These filaments are extremely sensitive to moisture. If the filament is exposed to air for a long period of time during printing, there is a very high risk of decreasing the quality of the filament. It is therefore necessary to keep the filament in a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003edry storage box\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eat all times, even during printing. This box helps to preserve the integrity of the filament and protect it so that it retains its unique properties. Since this product can degrade easily, it is essential to obtain a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003efilament dehydrator\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eand use it to dry the filament before using it.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor the dry storage box, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePolymaker PolyBox Edition II\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor a Filament dehydrator, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePrintDry Filament Dryer Pro\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMaterial compatibility :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polylite-black-abs-1-75mm-1kg\" title=\"Polymaker PolyLite Black ABS filament\" target=\"_blank\"\u003eABS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003ePC\/ABS\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polymide-black-copa-1-75mm-0-75kg\" title=\"Polymaker PolyMide Black Nylon filament\" target=\"_blank\"\u003eNylon\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polyflex-black-tpu95-1-75mm-0-75kg\" title=\"Polymaker PolyFlex Black TPU95 filament\" target=\"_blank\"\u003eTPU\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCPE\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polymax-black-pc-1-75mm-0-75kg\" title=\"Polymaker PolyMax Black PC\" target=\"_blank\"\u003ePC\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003ePP\u003c\/li\u003e\n\u003cli\u003ePVDF\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/polymaker-polymax-black-petg-1-75mm-0-75kg\" title=\"Polymaker PolyMax Black PETG filament\" target=\"_blank\"\u003ePETG\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003ePET\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg\" title=\"Polymaker PolyMide PA6-CF carbon fiber filled filament\" target=\"_blank\"\u003eCarbon fiber\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg\" title=\"Polymaker PolyMide PA6-GF glass fiber filled filament\" target=\"_blank\"\u003eglass fiber\u003c\/a\u003e filled materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWeight : \u003cstrong\u003e500g\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/AquaSys120-TDS_190918.pdf?v=1592511205\" title=\"AquaSys 120 Technical datasheet (TDS)\" target=\"_blank\"\u003eTechnical datasheet\u003c\/a\u003e (.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/AquaSys120-SDS_190918.pdf?v=1592511102\" title=\"Aquasys 120 Safety Datasheet (SDS)\" target=\"_blank\"\u003eSafety datasheet\u003c\/a\u003e (.pdf)\u003c\/p\u003e\n\u003c\/div\u003e"}
AquaSys 120 Filament 1.75mm 0.5kg
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$140.00
AquaSys 120 is a 3D printing support filament designed for engineering grade building materials. Compatible with ABS, PC, Nylon, TPU, and many more materials, it allows the printing of complex 3D shapes while retaining a good surface finish on supported parts. The Aquasys 120 support filament is completely water-soluble, leaving no residue. It ...
{"id":6705408147636,"title":"Aquasys 180 Filament 1.75mm 0.5kg","handle":"aquasys-180-filament-1-75mm-0-5kg","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAquaSys® 180 is the world’s only water-soluble 3D printing support material that’s compatible with Polyetheretherketone (PEEK), Polyetherketoneketone (PEKK), Polyetherimide (PEI), and polyphenylsulfone (PPSU).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt’s stable at chamber temperatures up to 180ºC. It provides complete design freedom. And it allows the additive manufacturing industry to move on to its next frontier: printing complex end-use parts, using high-strength thermoplastics.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT - These filaments are extremely sensitive to moisture. If the filament is exposed to air for a long period of time during printing, there is a very high risk of decreasing the quality of the filament. It is therefore necessary to keep the filament in a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003edry storage box\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eat all times, even during printing. This box helps to preserve the integrity of the filament and protect it so that it retains its unique properties. Since this product can degrade easily, it is essential to obtain a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003efilament dehydrator\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eand use it to dry the filament before using it.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor the dry storage box, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePolymaker PolyBox Edition II\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor a Filament dehydrator, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePrintDry Filament Dryer Pro\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter :\u003cstrong\u003e 1.75mm\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWeight : \u003cstrong\u003e500g\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"display: block;\" aria-labelledby=\"tab-title-camp_tab\" role=\"tabpanel\" id=\"tab-camp_tab\" class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--camp_tab panel entry-content wc-tab\"\u003e\n\u003cdiv class=\"wrapper-compatibility\"\u003e\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cp\u003eAquaSys 180 is engineered for enhanced adhesion and high thermal stability. Together, these properties allow it to bond effectively to a wide range of hydrophobic and hydrophilic materials. And while it does adhere to most commonly used 3D printing materials, it’s recommended primarily for use with PEEK, PEKK, PEI, and PPSU.\u003c\/p\u003e\n\u003cp\u003eWorking with lower temperature materials like ABS or PP? Try AquaSys\u003csup\u003e®\u003c\/sup\u003e 120.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003ePrinting Parameters\u003c\/h5\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003ePrinting Parameters AquaSys 180 filament is designed for use in fused filament fabrication (FFF) printers.\u003c\/p\u003e\n\u003cp\u003ePathway temperature: Keep the filament below 80°C prior to extrusion. Material that sits idle at temperatures of 80°C or above for extended periods of time prior to extrusion will not extrude properly.\u003c\/p\u003e\n\u003cp\u003eNozzle temperature: 230 - 300°C Build plate requirements: AquaSys filaments will adhere to a wide range of build plate materials. If poor adhesion is persistent, increase the temperature of the build plate, but not past the maximum build plate temperature of 180° C. Adhesives:\u003c\/p\u003e\n\u003cp\u003eGlue is not necessary if you use a raft made out of AquaSys 180. Follow your printer model’s material guidelines when printing a raft with another material.\u003c\/p\u003e\n\u003cp\u003eFDM 3D printing material: Pair AquaSys 180 with PEEK, PEKK, PEI, or PPSU.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003eExtruder Temperature: 230-300ºC (240-260ºC recommended)\u003cbr\u003eBuild plate temperature: 60-180ºC\u003cbr\u003eChamber temperature: Up to 180ºC\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/infinitematerialsolutions.com\/wp-content\/uploads\/2021\/03\/AquaSys180-TDS-EN-LT-0820.pdf\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/infinitematerialsolutions.com\/wp-content\/uploads\/2021\/03\/AquaSys180-SDS-US-EN-LT-0820.pdf\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-05T19:27:41-04:00","created_at":"2021-06-15T14:52:53-04:00","vendor":"Infinite Materials Solutions","type":"Open 1.75 Filaments","tags":["soluble","support"],"price":25000,"price_min":25000,"price_max":25000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39987023904948,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AQS-FIL-180-175-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aquasys 180 Filament 1.75mm 0.5kg","public_title":null,"options":["Default Title"],"price":25000,"weight":700,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850014147044","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Aquasys180-Filament-175mm-0-5kg.jpg?v=1658929369"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Aquasys180-Filament-175mm-0-5kg.jpg?v=1658929369","options":["Title"],"media":[{"alt":null,"id":30059469013228,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Aquasys180-Filament-175mm-0-5kg.jpg?v=1658929369"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/products\/Aquasys180-Filament-175mm-0-5kg.jpg?v=1658929369","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAquaSys® 180 is the world’s only water-soluble 3D printing support material that’s compatible with Polyetheretherketone (PEEK), Polyetherketoneketone (PEKK), Polyetherimide (PEI), and polyphenylsulfone (PPSU).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt’s stable at chamber temperatures up to 180ºC. It provides complete design freedom. And it allows the additive manufacturing industry to move on to its next frontier: printing complex end-use parts, using high-strength thermoplastics.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT - These filaments are extremely sensitive to moisture. If the filament is exposed to air for a long period of time during printing, there is a very high risk of decreasing the quality of the filament. It is therefore necessary to keep the filament in a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003edry storage box\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eat all times, even during printing. This box helps to preserve the integrity of the filament and protect it so that it retains its unique properties. Since this product can degrade easily, it is essential to obtain a\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003efilament dehydrator\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eand use it to dry the filament before using it.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor the dry storage box, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePolymaker PolyBox Edition II\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor a Filament dehydrator, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003ePrintDry Filament Dryer Pro\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter :\u003cstrong\u003e 1.75mm\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWeight : \u003cstrong\u003e500g\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"display: block;\" aria-labelledby=\"tab-title-camp_tab\" role=\"tabpanel\" id=\"tab-camp_tab\" class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--camp_tab panel entry-content wc-tab\"\u003e\n\u003cdiv class=\"wrapper-compatibility\"\u003e\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cp\u003eAquaSys 180 is engineered for enhanced adhesion and high thermal stability. Together, these properties allow it to bond effectively to a wide range of hydrophobic and hydrophilic materials. And while it does adhere to most commonly used 3D printing materials, it’s recommended primarily for use with PEEK, PEKK, PEI, and PPSU.\u003c\/p\u003e\n\u003cp\u003eWorking with lower temperature materials like ABS or PP? Try AquaSys\u003csup\u003e®\u003c\/sup\u003e 120.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003ePrinting Parameters\u003c\/h5\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cp\u003ePrinting Parameters AquaSys 180 filament is designed for use in fused filament fabrication (FFF) printers.\u003c\/p\u003e\n\u003cp\u003ePathway temperature: Keep the filament below 80°C prior to extrusion. Material that sits idle at temperatures of 80°C or above for extended periods of time prior to extrusion will not extrude properly.\u003c\/p\u003e\n\u003cp\u003eNozzle temperature: 230 - 300°C Build plate requirements: AquaSys filaments will adhere to a wide range of build plate materials. If poor adhesion is persistent, increase the temperature of the build plate, but not past the maximum build plate temperature of 180° C. Adhesives:\u003c\/p\u003e\n\u003cp\u003eGlue is not necessary if you use a raft made out of AquaSys 180. Follow your printer model’s material guidelines when printing a raft with another material.\u003c\/p\u003e\n\u003cp\u003eFDM 3D printing material: Pair AquaSys 180 with PEEK, PEKK, PEI, or PPSU.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003eExtruder Temperature: 230-300ºC (240-260ºC recommended)\u003cbr\u003eBuild plate temperature: 60-180ºC\u003cbr\u003eChamber temperature: Up to 180ºC\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/infinitematerialsolutions.com\/wp-content\/uploads\/2021\/03\/AquaSys180-TDS-EN-LT-0820.pdf\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/infinitematerialsolutions.com\/wp-content\/uploads\/2021\/03\/AquaSys180-SDS-US-EN-LT-0820.pdf\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Aquasys 180 Filament 1.75mm 0.5kg
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$250.00
AquaSys® 180 is the world’s only water-soluble 3D printing support material that’s compatible with Polyetheretherketone (PEEK), Polyetherketoneketone (PEKK), Polyetherimide (PEI), and polyphenylsulfone (PPSU). It’s stable at chamber temperatures up to 180ºC. It provides complete design freedom. And it allows the additive manufacturing industry ...
