Smooth PEI Print Sheet [XL]

{"id":8976325116140,"title":"Textured Powder-coated Print Sheet [XL]","handle":"xl-textured-powder-coated-print-sheet","description":"\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledgebase\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/how-to-print-on-a-powder-coated-sheet\/\"\u003eBlog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eScratchproof, hard to damage\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePLA prints with a small contact area may need a brim\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eTransfers texture to prints\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePLA prints with a huge footprint may warp\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003ePrints automatically detach after sheet cools down\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eNever clean with acetone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-07-27T13:08:48-04:00","created_at":"2025-07-27T13:01:00-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["prusa"],"price":9786,"price_min":9786,"price_max":9786,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46695096156396,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-TXT-0XL-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Textured Powder-coated Print Sheet [XL]","public_title":null,"options":["Default Title"],"price":9786,"weight":350,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_Textured_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753636064"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_Textured_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753636064","options":["Title"],"media":[{"alt":"Prusa XL Textured Powder-coated Print Sheet Product Picture","id":35738682589420,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_Textured_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753636064"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_Textured_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753636064","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledgebase\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/how-to-print-on-a-powder-coated-sheet\/\"\u003eBlog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eScratchproof, hard to damage\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePLA prints with a small contact area may need a brim\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eTransfers texture to prints\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePLA prints with a huge footprint may warp\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003ePrints automatically detach after sheet cools down\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eNever clean with acetone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8976331604204,"title":"Satin Powder-coated Print Sheet [XL]","handle":"xl-satin-powder-coated-print-sheet","description":"\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003eThe Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledgebase\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eSuitable for both PLA and PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eAcetone causes the surface to quickly deteriorate\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eLightly textured surface finish\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eEasy maintenance and good adhesion qualities\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-07-27T13:17:53-04:00","created_at":"2025-07-27T13:10:08-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["prusa"],"price":10766,"price_min":10766,"price_max":10766,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46695158481132,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-STN-0XL-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Satin Powder-coated Print Sheet [XL]","public_title":null,"options":["Default Title"],"price":10766,"weight":350,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_Satin_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753636575"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_Satin_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753636575","options":["Title"],"media":[{"alt":"Prusa XL Satin Powder-coated Print Sheet Product Picture","id":35738709917932,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_Satin_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753636575"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_Satin_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753636575","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003eThe Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledgebase\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eSuitable for both PLA and PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eAcetone causes the surface to quickly deteriorate\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eLightly textured surface finish\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eEasy maintenance and good adhesion qualities\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8976338321644,"title":"PA Nylon Powder-coated Print Sheet [XL]","handle":"pa-nylon-powder-coated-print-sheet","description":"\u003ch2 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eOVERVIEW:\u003c\/h2\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis print sheet is specially designed to print polyamide-based filaments,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eespecially the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.prusa3d.com\/product\/prusament-pa11-carbon-fiber-black-800g\/\"\u003ePrusament PA11 Carbon Fiber Black.\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eThe PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11. You can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\"\u003eknowledgebase.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eIMPORTANT!\u003c\/h3\u003e\n\u003cp\u003eThe surface of this sheet should be cleaned only with pure water.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUsing common agents such as IPA or Acetone will lead to a quick deterioration of the surface.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUsing a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eGreat for polyamide-based materials\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eSuitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for a glue stick\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eCan be damaged with IPA and acetone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eCan be cleaned just with water\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-07-27T13:52:23-04:00","created_at":"2025-07-27T13:42:39-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["Prusa XL"],"price":15260,"price_min":15260,"price_max":15260,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46695248265452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-0PA-0XL-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"PA Nylon Powder-coated Print Sheet [XL]","public_title":null,"options":["Default Title"],"price":15260,"weight":350,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_PA_Nylon_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753638613"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_PA_Nylon_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753638613","options":["Title"],"media":[{"alt":"Prusa XL PA Nylon Powder-coated Print Sheet Product Picture","id":35738744291564,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_PA_Nylon_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753638613"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Prusa_XL_PA_Nylon_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753638613","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eOVERVIEW:\u003c\/h2\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis print sheet is specially designed to print polyamide-based filaments,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eespecially the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.prusa3d.com\/product\/prusament-pa11-carbon-fiber-black-800g\/\"\u003ePrusament PA11 Carbon Fiber Black.\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eThe PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11. You can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\"\u003eknowledgebase.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eIMPORTANT!\u003c\/h3\u003e\n\u003cp\u003eThe surface of this sheet should be cleaned only with pure water.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUsing common agents such as IPA or Acetone will lead to a quick deterioration of the surface.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUsing a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eGreat for polyamide-based materials\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eSuitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for a glue stick\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eCan be damaged with IPA and acetone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eCan be cleaned just with water\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8985148195052,"title":"Original Prusa XL Enclosure","handle":"original-prusa-xl-enclosure","description":"\u003csection class=\"sc-49946288-0 izdrjy\"\u003e\n\u003cdiv class=\"sc-49946288-1 dIEyZK\"\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eSeamless Integration\u003c\/h3\u003e\n\u003cp\u003eThe XL Enclosure is designed for seamless integration with the rest of the printer. Not just the physical parts, but also the software: because the Enclosure is directly connected to the mainboard of the printer, you can configure a number of useful functions directly through the printer’s LCD touch panel. Set up the filtration performance and even post-print filtration duration (e.g. when you print from materials such as ASA or PCCF) so that the system runs for additional time to filter out all particles produced during the print job, control the LED strips and check the lifespan of the HEPA filter easily in the printer’s menu.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\" style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_back_1.webp?v=1755023585\" style=\"margin-bottom: 16px; float: none; width:100%;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003ePrint Advanced Materials with Ease\u003c\/h3\u003e\n\u003cp\u003eOriginal Prusa XL Enclosure makes\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting from certain materials easier,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand at the same time, it adds\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ea lot of other benefits.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAdvanced Filtration System with HEPA filter (99.9% efficiency) helps to reduce odors and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprevents the spread of ultra-fine particles\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(UFPS) into the air. The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXL printer automatically controls\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe filtration and utilizes airflow where the air is drawn in from below and blown through the HEPA filter out of the Enclosure. You can check the temperature inside the Enclosure using the thermometer, located on the Enclosure door (indication only), or using the information on the printer display.\u003cbr\u003e\u003cbr\u003eFor materials that do not produce as many particles and odors (such as PLA and PETG), filtration is not used to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eextend the life of the HEPA filter,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebut can be activated manually. XL printer also monitors HEPA filter usage and notifies you when it will be time to replace it. You can easily order a new filter from our e-shop. The Enclosure also contains an\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eadditional LED strip\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethat is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esynchronized\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith your XL printer, and, apart from the illumination of the print area, it also serves as the printer status indication light.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_print_2.webp?v=1755023616\" style=\"width:100%;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEverything is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eincluded\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ein the package including plastic parts, you don’t need to print anything on your own. You just need to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ereplace several plastic components\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof your printer (such as a few parts of the nextruder, or the belt holder) with the parts included in the box, which are made of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emore heat-resistant material (PCCF).\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA 3D printer is not a part of the package.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"sc-49946288-0 izdrjy\" id=\"Features\"\u003e\n\u003cdiv class=\"sc-49946288-1 dIEyZK\"\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003ch5\u003eMain Features\u003c\/h5\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eStable Printing Environment\u003c\/h3\u003e\n\u003cp\u003eThe Enclosure creates a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estable printing environment with increased temperatures,\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eshielding the printer from drafts and blasts of cold air. This is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eperfect for printing demanding high-temperature materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eotherwise prone to warping - such as PCCF, Nylon, PP, and more. It also reduces dust build-up on moving parts, which helps keep the printer running and reduces the frequency of maintenance required.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_filter_4.webp?v=1755024662\" style=\"width:100%;\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eAdvanced Filtration System\u003c\/h3\u003e\n\u003cp\u003eThe filtration system is useful especially when you\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eprint from PC Blend Carbon Fiber and other materials that produce particles during printing.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIt also reduces the odor and prevents the spread of ultra-fine particles (UFPS) into the air, when printing from certain materials.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_lid_5.webp?v=1755024689\" style=\"width:100%;\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eHigh-quality Components\u003c\/h3\u003e\n\u003cp\u003eThe frame is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emade of metal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand the side and top panels are made from PETG plastic. The frame features\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emounting elements\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto install various additional printed parts, electronics, cameras, and other add-ons, and tidy cable management. The Enclosure also contains an additional LED strip, connected directly to the XL printer and synchronized with its built-in LED strips. In addition to illuminating the print area it also serves as a printer status indicator light.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_bellow_6.webp?v=1755024714\" style=\"width:100%;\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eBellows cover\u003c\/h3\u003e\n\u003cp\u003eSome materials, such as PLA perform worse in high temperatures. This is why we designed a special magnetic bellows cover, that can be quickly folded, creating much better airflow to maintain optimal conditions for these materials. This ensures you will be able to print any material without limitations. The bellows cover is made of high-quality and durable polyester and polyurethane.\u003c\/p\u003e\n\u003cp\u003eUnlike usual hinged doors, the folded cover doesn’t take up any extra space on the sides or in front of the printer and also gives you much better access to the entire printing area.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_bellow_dewn_7.webp?v=1755024749\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"sc-49946288-0 izdrjy\" id=\"parameters\"\u003e\n\u003cdiv class=\"sc-49946288-1 dIEyZK\"\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003ch5\u003eTechnical Parameters\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions when installed on the printer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e700 mm (w) × 900 mm (h) × 720 mm (d)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure type:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePassive, heating provided only by the 3D printer’s heatbed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e15,7 kg (34.6 lbs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDirectly on the printer, can be quickly removed if needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe basic package contains:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll components required to build the Enclosure (frame parts, transparent side panels, top and bottom panels, bellows set cover, mounting material, printer frame brace), PCCF replacement parts for the XL printer, temperature sensor, LED strip, and documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/xl_product_dimensions_all.webp?v=1755024841\" alt=\"\" style=\"width:100%;\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"sc-49946288-0 izdrjy\"\u003e\n\u003cdiv class=\"sc-49946288-1 dIEyZK\"\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003cp\u003eFor the assembly of the Original Prusa XL Enclosure, you will need\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eT10 Torx key (screwdriver)\u003c\/li\u003e\n\u003cli\u003e1.5 mm Allen key\u003c\/li\u003e\n\u003cli\u003e2.5 mm Allen key\u003c\/li\u003e\n\u003cli\u003eNeedle-nose pliers\u003c\/li\u003e\n\u003cli\u003eUniversal wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen you select the \"Tools required for assembly\" option, you will get the following:\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/TOOLS_XL_v8.webp?v=1755024903\" alt=\"\" style=\"width:100%;\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","published_at":"2025-08-12T15:18:29-04:00","created_at":"2025-08-12T13:51:02-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["3Dprinters","enclosure","FreeShippingExcluded","Prusa XL"],"price":90900,"price_min":90900,"price_max":90900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46730102866156,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-PRT-0XL-ENC-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Prusa XL Enclosure","public_title":null,"options":["Default Title"],"price":90900,"weight":3700,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture.webp?v=1755028354","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture_Diagonal_View.webp?v=1755028559","\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture_Side_View.webp?v=1755028537"],"featured_image":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture.webp?v=1755028354","options":["Title"],"media":[{"alt":"Original Prusa XL Enclosure Product Picture","id":35787094753516,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture.webp?v=1755028354"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture.webp?v=1755028354","width":1400},{"alt":"Original Prusa XL Enclosure Product Picture Diagonal View","id":35787051663596,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture_Diagonal_View.webp?v=1755028559"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture_Diagonal_View.webp?v=1755028559","width":1400},{"alt":"Original Prusa XL Enclosure Product Picture Side View","id":35787094786284,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture_Side_View.webp?v=1755028537"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/fr.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_XL_Enclosure_Product_Picture_Side_View.webp?v=1755028537","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003csection class=\"sc-49946288-0 izdrjy\"\u003e\n\u003cdiv class=\"sc-49946288-1 dIEyZK\"\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eSeamless Integration\u003c\/h3\u003e\n\u003cp\u003eThe XL Enclosure is designed for seamless integration with the rest of the printer. Not just the physical parts, but also the software: because the Enclosure is directly connected to the mainboard of the printer, you can configure a number of useful functions directly through the printer’s LCD touch panel. Set up the filtration performance and even post-print filtration duration (e.g. when you print from materials such as ASA or PCCF) so that the system runs for additional time to filter out all particles produced during the print job, control the LED strips and check the lifespan of the HEPA filter easily in the printer’s menu.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\" style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_back_1.webp?v=1755023585\" style=\"margin-bottom: 16px; float: none; width:100%;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003ePrint Advanced Materials with Ease\u003c\/h3\u003e\n\u003cp\u003eOriginal Prusa XL Enclosure makes\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprinting from certain materials easier,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand at the same time, it adds\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ea lot of other benefits.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAdvanced Filtration System with HEPA filter (99.9% efficiency) helps to reduce odors and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprevents the spread of ultra-fine particles\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(UFPS) into the air. The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXL printer automatically controls\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe filtration and utilizes airflow where the air is drawn in from below and blown through the HEPA filter out of the Enclosure. You can check the temperature inside the Enclosure using the thermometer, located on the Enclosure door (indication only), or using the information on the printer display.\u003cbr\u003e\u003cbr\u003eFor materials that do not produce as many particles and odors (such as PLA and PETG), filtration is not used to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eextend the life of the HEPA filter,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebut can be activated manually. XL printer also monitors HEPA filter usage and notifies you when it will be time to replace it. You can easily order a new filter from our e-shop. The Enclosure also contains an\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eadditional LED strip\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethat is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esynchronized\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith your XL printer, and, apart from the illumination of the print area, it also serves as the printer status indication light.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_print_2.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_print_2.webp?v=1755023616\" style=\"width:100%;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEverything is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eincluded\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ein the package including plastic parts, you don’t need to print anything on your own. You just need to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ereplace several plastic components\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof your printer (such as a few parts of the nextruder, or the belt holder) with the parts included in the box, which are made of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emore heat-resistant material (PCCF).\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA 3D printer is not a part of the package.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"sc-49946288-0 izdrjy\" id=\"Features\"\u003e\n\u003cdiv class=\"sc-49946288-1 dIEyZK\"\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003ch5\u003eMain Features\u003c\/h5\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eStable Printing Environment\u003c\/h3\u003e\n\u003cp\u003eThe Enclosure creates a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estable printing environment with increased temperatures,\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eshielding the printer from drafts and blasts of cold air. This is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eperfect for printing demanding high-temperature materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eotherwise prone to warping - such as PCCF, Nylon, PP, and more. It also reduces dust build-up on moving parts, which helps keep the printer running and reduces the frequency of maintenance required.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_filter_4.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_filter_4.webp?v=1755024662\" style=\"width:100%;\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eAdvanced Filtration System\u003c\/h3\u003e\n\u003cp\u003eThe filtration system is useful especially when you\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eprint from PC Blend Carbon Fiber and other materials that produce particles during printing.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIt also reduces the odor and prevents the spread of ultra-fine particles (UFPS) into the air, when printing from certain materials.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure%20XL_lid_5.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_lid_5.webp?v=1755024689\" style=\"width:100%;\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eHigh-quality Components\u003c\/h3\u003e\n\u003cp\u003eThe frame is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emade of metal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand the side and top panels are made from PETG plastic. The frame features\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emounting elements\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto install various additional printed parts, electronics, cameras, and other add-ons, and tidy cable management. The Enclosure also contains an additional LED strip, connected directly to the XL printer and synchronized with its built-in LED strips. In addition to illuminating the print area it also serves as a printer status indicator light.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_6.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_bellow_6.webp?v=1755024714\" style=\"width:100%;\"\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eBellows cover\u003c\/h3\u003e\n\u003cp\u003eSome materials, such as PLA perform worse in high temperatures. This is why we designed a special magnetic bellows cover, that can be quickly folded, creating much better airflow to maintain optimal conditions for these materials. This ensures you will be able to print any material without limitations. The bellows cover is made of high-quality and durable polyester and polyurethane.\u003c\/p\u003e\n\u003cp\u003eUnlike usual hinged doors, the folded cover doesn’t take up any extra space on the sides or in front of the printer and also gives you much better access to the entire printing area.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.prusa3d.com\/cdn-cgi\/image\/format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg\" srcset=\"\/cdn-cgi\/image\/width=320,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg 320w, \/cdn-cgi\/image\/width=600,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg 600w, \/cdn-cgi\/image\/width=750,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg 750w, \/cdn-cgi\/image\/width=1000,format=auto,quality=85\/content\/wysiwyg\/fotky\/XL_enclosure\/Enclosure_XL_bellow_dewn_7.jpg 1000w,\" class=\"sc-73fd44bf-0 dINIaH\" alt=\"\" sizes=\"(max-width: 991px) 100vw, 750px\" loading=\"lazy\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Enclosure_XL_bellow_dewn_7.webp?v=1755024749\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"sc-49946288-0 izdrjy\" id=\"parameters\"\u003e\n\u003cdiv class=\"sc-49946288-1 dIEyZK\"\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003ch5\u003eTechnical Parameters\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions when installed on the printer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e700 mm (w) × 900 mm (h) × 720 mm (d)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure type:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePassive, heating provided only by the 3D printer’s heatbed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e15,7 kg (34.6 lbs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDirectly on the printer, can be quickly removed if needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe basic package contains:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll components required to build the Enclosure (frame parts, transparent side panels, top and bottom panels, bellows set cover, mounting material, printer frame brace), PCCF replacement parts for the XL printer, temperature sensor, LED strip, and documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/xl_product_dimensions_all.webp?v=1755024841\" alt=\"\" style=\"width:100%;\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"sc-49946288-0 izdrjy\"\u003e\n\u003cdiv class=\"sc-49946288-1 dIEyZK\"\u003e\n\u003cdiv class=\"sc-722ea037-0 sc-2d61104e-0 kacuIn dBLFeB\"\u003e\n\u003cp\u003eFor the assembly of the Original Prusa XL Enclosure, you will need\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eT10 Torx key (screwdriver)\u003c\/li\u003e\n\u003cli\u003e1.5 mm Allen key\u003c\/li\u003e\n\u003cli\u003e2.5 mm Allen key\u003c\/li\u003e\n\u003cli\u003eNeedle-nose pliers\u003c\/li\u003e\n\u003cli\u003eUniversal wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen you select the \"Tools required for assembly\" option, you will get the following:\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/TOOLS_XL_v8.webp?v=1755024903\" alt=\"\" style=\"width:100%;\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e"}