Free shipping on order over $200 / Livraison gratuite pour les commandes de $200 et+
{"id":7802305282284,"title":"Creality Ender 3 S1","handle":"creality-ender-3-s1","description":"\u003cp\u003eThe Ender-3 S1 is the first direct drive 3D Printer of the Ender Series. The Ender-3 S1 supports more soft materials, comes preinstalled with CR Touch Auto Leveling Kit, and prints 50mm higher. \u003cbr\u003e\u003cbr\u003eVoxel Factory made the SPE-1000 special inspection on this unit (CSA equivalent) which is valid Canada wide.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 487 x 453 x 622 mm \u003cspan\u003e(19.2 x 17.8 x 24.5 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 9.1 kg (20 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 220 x 220 x 270 mm \u003cspan\u003e(8.7 x 8.7 x 10.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 13,068 cm³ (802 in³)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : \u003cspan data-mce-fragment=\"1\"\u003eSingle Dual-Gear direct drive extruder from Creality\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHotend : \u003cspan data-mce-fragment=\"1\"\u003eSprite hotend and extruder assembly f\u003c\/span\u003erom Creality\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 260°C (Voxel Factory suggest \u003cspan data-mce-fragment=\"1\"\u003e245°C MAX\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eHeatbed : PC on spring steel, flexible, magnetic (up to 100\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Manual and\/or automatic\u003c\/li\u003e\n\u003cli\u003eEnclosure : Open 3D printer, optional enclosure available\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : SD Card, LCD Screen \u0026amp; Knob, USB\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 350 W\u003c\/li\u003e\n\u003cli\u003eLive camera : No\u003c\/li\u003e\n\u003cli\u003ePrint recovery : Yes\u003c\/li\u003e\n\u003cli\u003eFilament sensor : Yes\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : None\u003c\/li\u003e\n\u003cli\u003eDisplay : \u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD display with rotary knob\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality Slicer, CURA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD display with rotary knob\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ\u003c\/li\u003e\n\u003cli\u003ePrintable formats: GCODE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCan print: PLA, Tough PLA, PETG, Nylon, ABS,\u003cbr\u003eTPU, Carbon \u0026amp; Glass filled nylon (With optional nozzle)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOpen filaments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2022-10-25T15:16:04-04:00","created_at":"2022-10-25T14:41:25-04:00","vendor":"Creality","type":"Creality 3D Printers","tags":["1.75mm","3Dprinters","Creality"],"price":49900,"price_min":49900,"price_max":49900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43415203643628,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CLT-3DP-NDR-XX3-XS1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Creality Ender 3 S1","public_title":null,"options":["Default Title"],"price":49900,"weight":11200,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6971636401346","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/CrealityEnder3S1.webp?v=1666725358","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ender-3S1Card.webp?v=1666799700"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/CrealityEnder3S1.webp?v=1666725358","options":["Title"],"media":[{"alt":null,"id":30664583839980,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/CrealityEnder3S1.webp?v=1666725358"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/CrealityEnder3S1.webp?v=1666725358","width":1400},{"alt":null,"id":30670246150380,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ender-3S1Card.webp?v=1666799700"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ender-3S1Card.webp?v=1666799700","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Ender-3 S1 is the first direct drive 3D Printer of the Ender Series. The Ender-3 S1 supports more soft materials, comes preinstalled with CR Touch Auto Leveling Kit, and prints 50mm higher. \u003cbr\u003e\u003cbr\u003eVoxel Factory made the SPE-1000 special inspection on this unit (CSA equivalent) which is valid Canada wide.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 487 x 453 x 622 mm \u003cspan\u003e(19.2 x 17.8 x 24.5 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 9.1 kg (20 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 220 x 220 x 270 mm \u003cspan\u003e(8.7 x 8.7 x 10.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 13,068 cm³ (802 in³)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75mm\u003c\/li\u003e\n\u003cli\u003eExtruder : \u003cspan data-mce-fragment=\"1\"\u003eSingle Dual-Gear direct drive extruder from Creality\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHotend : \u003cspan data-mce-fragment=\"1\"\u003eSprite hotend and extruder assembly f\u003c\/span\u003erom Creality\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 260°C (Voxel Factory suggest \u003cspan data-mce-fragment=\"1\"\u003e245°C MAX\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eHeatbed : PC on spring steel, flexible, magnetic (up to 100\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling : Manual and\/or automatic\u003c\/li\u003e\n\u003cli\u003eEnclosure : Open 3D printer, optional enclosure available\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : SD Card, LCD Screen \u0026amp; Knob, USB\u003c\/li\u003e\n\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating : 350 W\u003c\/li\u003e\n\u003cli\u003eLive camera : No\u003c\/li\u003e\n\u003cli\u003ePrint recovery : Yes\u003c\/li\u003e\n\u003cli\u003eFilament sensor : Yes\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : None\u003c\/li\u003e\n\u003cli\u003eDisplay : \u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD display with rotary knob\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreality Slicer, CURA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003ecolor 4.3 inch LCD display with rotary knob\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ\u003c\/li\u003e\n\u003cli\u003ePrintable formats: GCODE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCan print: PLA, Tough PLA, PETG, Nylon, ABS,\u003cbr\u003eTPU, Carbon \u0026amp; Glass filled nylon (With optional nozzle)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOpen filaments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

Imprimante 3D double extrudeur Ultimaker S5

Product Description
Sku: CLT-3DP-NDR-XX3-XS1
Vendor: Creality

Store inventory
Calculating...

$499.00
Maximum quantity available reached.

 
Demander une soumission

 

La nouvelle imprimante 3D d'Ultimaker met en vedette son système de double extrusion avec des buses facilement échangeable ainsi qu'une caméra intégrée, connexion WiFi , USB et bien plus!

Un nivellement actif garantit une première couche d'impression parfaite, un enclos contrôle le flux d'air, puis le détecteur de filament arrêtera l'impression et vous avisera quand il manque du filament. Faites confiance à la S5 de faire son travail pendant que vous faites le vôtre.

L'Ultimaker S5 vous permet d'imprimer avec une large gamme de matériaux 3D incluant parmi tant d'autres : Nylon, Tough PLA, ABS, CPE et PVA. Avec son système de double extrusion, vous pouvez imprimer avec des supports solubles pour vous donner la liberté de créer les figures désirées sans limitations. 

Atelier de 3 heures offert gratuitement avec chaque imprimante Ultimaker.

Dimensions & Poids

  • Dimensions externes: 342 x 505 x 588 mm (13.5 x 19.9 x 23.1 pouces)
  • Poids: 10.6 kg (23.3 lb)

Impression

  • Technologie : Fused Filament Fabrication (FFF)
  • Dimensions d'impression : 330 x 240 x 300 mm (12.9 x 9.4 x 11.8 pouces)
  • Volume d'impression : 23760 cm³ (571 in³)
  • Volume d'impression (extrusion double) : 8471 cm³ (1431 in³)
  • Hauteur de couche : 20 microns et plus
  • Diamètre du filament : 2.85mm
  • Extrudeur : Double
  • Tête chauffante : Print Cores échangeable (0.25 mm, 0.4 mm ou 0.8 mm)
  • Diamètre de la buse : 0.4 mm (standard)
  • Température maximale de la buse : 280°C
  • Plaque chauffante : Vitre chauffée (jusqu'à 140°C)
  • Nivellement : Actif (propriétaire d'Ultimaker)
  • Enclos : porte d'avant
  • Interface & Connectivité : LCD tactile 4.7 pouces, USB, Wifi
  • Axis Motors : Step motors
  • Power rating : 500 W
  • Caméra intégrée (visible à partir du logiciel Cura et sur l'application)
  • Détection de matériaux : Autodétection par scanneur NFC

Tranchage

Contrôle

OS Supporté

  • MacOS, Windows and Linux
  • Plugin integration : SolidWorks, Siemens NX

Type de fichiers

  • Ultimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG
  • Printable formats: G, GCODE, GCODE.gz, UPF
  • Optimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,
    TPU 95A, PP, PVA, Breakaway
  • Also supports third-party materials

Related Products